Protospace Wiki - User contributions [en]

Tools we have

2012-10-16T05:34:55Z

19200baud: /* Electronics Tools */

==Notes==

Fill in any data you know of/own in the following suggested format (alphabetically):
# Tool Name (Brand/Color)
# Tool Owner/Donator name if any.
# Tool Ownership Status (Protospace property, on loan, semi-permanent loan [likely staying at PS but donor might take it back some day], private)
# Tool Status (working/needs fixing/finicky/etc)
# Tool Use Restrictions (Open to all, open to members only, ask owner first, read instructions first, must be trained/certified).

Please add pictures too.

Also, please amalgamate old content at bottom to new format, removing the old as you go. Delete this message when complete.

Treat tools with respect and care! Also clean them up and put them back before you leave :)

==3D Printing/Cutting Tools==

* [http://farm7.staticflickr.com/6051/6374307163_30109e8947_o.jpg 80W Chinese Laser Cutter with a 4' x 3' cutting area] http://www.rabbitlaserusa.com/laser_RL1290.asp - Brian Queen - On Loan (August?) - Working - Must be certified
* [http://farm7.staticflickr.com/6096/6374306633_408dc5271e_o.jpg Makerbot cupcake CNC] - ?? - ?? - ?? - ??
* [http://farm8.staticflickr.com/7033/6579843923_19329e76cb_z.jpg RapMan 3D Printer] - Brian Queen - ?? - ?? - ??
* Utilimaker 3D Printer - Brian Queen - ?? - Working okay, needs heated bed - ??

==Automotive Tools==

* Compressor (big) - CPAA - PS Owned - Working - ??
* Floor Jack (Certified/blue) - Tremaine "Dexter" - Semi-Permanent Loan - Working - Open To All
* Socket/Wrench Set - Ben Reed - PS Owned - Working - Open To All

==Electronics Tools==

* Compressor (small/black), Air Tank, Controls & Air Dryer - circuithacker & 19200baud - For use with Pick & Place as long as we are protospace members - Needs plumbing and wiring fix - ??
* Lab Power Supply - ?? - ?? - ??
* Oscilloscope (Kikusui COS5060 60Mhz) - Dan Damron - Working - Open to Members Only
* Oscilloscope (Tektronics 2225 50Mhz) - ?? - ?? - ??
* Pick & Place (Multitroniks) - ?? - ?? - Needs Fixing(?) - ??
* Reflow SMT Station - Dan Damron - ?? - Working - Open to Members Only
* SMT Hot Air Rework Station (with soldering tools)- Dan Damron - ?? - Working - Open to Members Only

==Metalworking Tools==

* Angle Grinder w/ case (Kawasaki/Green) - ?? - ?? - Working - ??
* Bench Grinder (Baldor/Red) - ?? - ?? - Working - ??
* Bench Grinder (Powerfist/Grey) - Tremaine "Dexter" - Donated to Protospace - Working - Open To All
* Compressor (White) - ?? - ?? - Needs fixing, does not hold pressure above 25 psi, paired with yellow plasma cutter - ??
* Drill Press - ?? - PS Owned - Working - ??
* Forge - ?? - ?? - ?? - ??
* Mill (big) (Craftex/Green) - Jim Akeson - Semi-Permanent Loan - Working - ??
* [http://farm7.staticflickr.com/6239/6374306473_dbbca442d3_o.jpg Mill (small CNC) (MAXNC 10/blue)] - Brian Queen - ?? - Needs dedicated workstation, Travis working on it - ??
* Plasma Cutter (Miller, Small, Blue) - ?? - ?? - Working - ??
* Plasma Cutter (Huge, Yellow) - ?? - ?? - Needs power cord, seals, paired with white compressor - ??
* Tap & Die set (Mastercraft) - Tremaine - ?? - Working - ??
* Vice (Small, Irwin) - ?? - ?? - Working - Open To All
* Vice (Giant) - Joe Piche - Donated to Protospace - Working - Open To All

==Woodworking/Plastic Tools==

* Band Saw (Green) - Group buy from Travis, Dan, Jim, Mike - PS Owned - Needs set screw, tensioner is broken - ??
* Chop Saw (Ryobi/Blue) - ?? - ?? - Working - ??
* Cutoff Saw (B&D) - ?? - ?? - Working - ??
* Cutoff Saw (Red) - ?? - ?? - ?? - ??
* Corded Drill (Dewalt/Yellow - ?? - ?? - Working - ??
* Corded Dremel & Accessories - ?? - ?? - Working - ??
* Cordless Drill (Orange) - ?? - ?? - Working - ??
* Cordless Dremel & Case (Grey) - ?? - ?? - Working - ??
* Jiggaw (Skil/Black) - ?? - ?? - Working - ??
* Joiner - Jim Akeson - ?? - ?? - ?? - ??
* Planer - ?? - ?? - ?? - ??
* Sander Mouse (Ryobi/Blue) - ?? - ?? - Working - ??
* Scroll Saw (Dremel/Grey) - ?? - ?? - Working - ??
* Scroll Saw (Mastercraft/Blue) - ?? - ?? - Working - ??
* Table Saw - Jim Akeson - ?? - ?? - Needs motor installed - ??
* Workmate - ?? - ?? - Working - ??

==Misc Tools==

* PA System & Speakers - Dan Damron - ?? - ?? - ??
* Sewing Machine (Singer 730) - ?? - ?? - Marginally Working - ??
* Sewing Machine (EuroPro) - ?? - ?? - Needs Fixing - ??
* Shop Vac (Orange) - ?? - ?? - ??
* Vacuum Former - Kan - ?? - ?? - Needs serious fixing/case - ??
* Vacuum Former (complete) - Lorin - ?? - ?? - ??

==Old Content To Be Merged With Above==

===Member tools and gadgets===
Tremaine:
* 4 1 ton vehicle jack stands
* metric ratchet set with 3/8" and 1/4" drivers (6mm to 19mm sockets)
* metric ratchet 1/2" driver, 1 short extender and 1 long, sockets from 12mm to 24mm (some deep impact)
* metric crescent wrenches 8mm - 24mm
* variety of wrenches, standard screwdrivers
* Metric hex key set
* tap & die set
* Heat gun
* Torque wrench
* Breaker bar with 1/2" driver
* Blowtorch (triggerstart)

(more to be added)

Mike Hermann
* Hitachi 200 MHz digital scope
* Weller Adjustable soldering station
* 2 channel 30 VDC bench supply
* Current clamps for multimeter
* Std metal working handtools
* Std wood working handtools
* Makita LiON contractor pack (4 tool: rotary saw, sabre/sawsall, driver, drill)
* Paintgun (compressor driven)
* Rotary saw
* Jigsaw
* 2.5 T rollaway jack
* Metric and Imperial wrench set
* Large torque wrench
* Shop vac
* Dremel and kit
* Bit set (std drivers, allan key, torx, torx secure, etc)
* (more to be added)

Dan VE6IBM
* 60 Mhz 3 channel scope
* (more to be added)

3D Printing (archived - 2012)

2012-07-30T00:29:00Z

19200baud: /* Progress thus far */ updates

== Members Involved ==

* Bengizmo
* Brian Q
* Codohundo
* Circuithacker
* 19200Baud

== Project Scope ==

To continuously research and develop amateur 3D printing techniques (primarily plastic extrusion).

== Details ==

Protospace has recently had a [http://farm7.staticflickr.com/6096/6374306633_1e96478b20.jpg Makerbot Cupcake CNC] donated, and we have Brian's [http://farm8.staticflickr.com/7033/6579843923_19329e76cb_z.jpg Rapman 3.1] at the space for members to play with. Both require hardware updates which will need to be purchased when we have the moneys.

== Progress thus far ==

* RapMan upgraded to firmware 4.2.2
* BFB Axon Software package has been found to be the best at converting STL files to BFB files for the RapMan
* The Rapman is [http://farm8.staticflickr.com/7027/6579842017_6b8f6d554d.jpg printing accurate 3D objects in ABS], haven't tried PLA yet.
* The Makerbot Cupcake CNC has been upgraded to the newest firmware
* Small objects can be printed on the CupCake CNC

== To Do ==
RapMan Upgrades:
* Install new heated print bed - The current bed is warped, and ABS plastic also warps / lifts from the bed because it needs to be heated throughout during the print. Here is the bed Brian ordered (which is also what he will put on his Ultimaker when it arrives next month) > http://mixshop.ca/index.php?main_page=product_info&products_id=96
* Dual print headers (future upgrade) > http://www.bitsfrombytes.com/store/rapman-31-double-head-extruder-upgrade This will allow us to use both PLA & ABS at the same time to create much more complicated objects with proper structural support. You could also feed one with water soluble filament so that the support structure of an object can be washed away after it's printed.

Cupcake CNC upgrades:
* Filament Spindle MK1 - We can laser cut most of these parts ourselves once the laser is running, the other parts are cheap. Solarbotics installed this on their makerbot, makes it a lot more usable > http://wiki.makerbot.com/spindle-mk1-assembly#toc29
* A new plastruder - the one on our Cupcake CNC is an old revision, we should upgrade to at least a MK6 > http://store.makerbot.com/stepstruder-mk6-plus.html. The kit is currently sold out, but Dana has a contact at Makerbot that we might be able to utilize for sourcing parts.
* New electronics to control the MK6 - This may be difficult to source as there aren't any new boards being produced for the cupcake CNC. Thus, we may have to go with a board developed by a third party > http://koti.kapsi.fi/~kliment/gen3plus/
* Z Crank - we can print it, tis a nice little tweak > http://www.thingiverse.com/thing:975

== Future Additions ==
* Use our existing 3D printers to print replacement parts for themselves
* Print parts for Prusa Mendel Kits
* Source non-printed parts for Prusa Mendel Kits
* Sell Prusa Mendel Kits

== USING THE 3D PRINTERS ==

RapMan:
* Raft must be set at 244 degrees celcius or higher, otherwise it will lift from print bed (this will be fixed once we have the heated bed)
* Object should be set 10 degrees hotter than raft to allow (somewhat) easy separation.

3D Printing (archived - 2012)

2012-07-30T00:25:56Z

19200baud: /* Members Involved */

== Members Involved ==

* Bengizmo
* Brian Q
* Codohundo
* Circuithacker
* 19200Baud

== Project Scope ==

To continuously research and develop amateur 3D printing techniques (primarily plastic extrusion).

== Details ==

Protospace has recently had a [http://farm7.staticflickr.com/6096/6374306633_1e96478b20.jpg Makerbot Cupcake CNC] donated, and we have Brian's [http://farm8.staticflickr.com/7033/6579843923_19329e76cb_z.jpg Rapman 3.1] at the space for members to play with. Both require hardware updates which will need to be purchased when we have the moneys.

== Progress thus far ==

* RapMan upgraded to firmware 4.2.0
* BFB Axon Software package has been found to be the best at converting STL files to BFB files for the RapMan
* The Rapman is [http://farm8.staticflickr.com/7027/6579842017_6b8f6d554d.jpg printing accurate 3D objects in ABS], haven't tried PLA yet.
* The Makerbot Cupcake CNC has been upgraded to the newest firmware
* Small objects can be printed on the CupCake CNC

== To Do ==
RapMan Upgrades:
* Install new heated print bed - The current bed is warped, and ABS plastic also warps / lifts from the bed because it needs to be heated throughout during the print. Here is the bed Brian ordered (which is also what he will put on his Ultimaker when it arrives next month) > http://mixshop.ca/index.php?main_page=product_info&products_id=96
* Dual print headers (future upgrade) > http://www.bitsfrombytes.com/store/rapman-31-double-head-extruder-upgrade This will allow us to use both PLA & ABS at the same time to create much more complicated objects with proper structural support. You could also feed one with water soluble filament so that the support structure of an object can be washed away after it's printed.

Cupcake CNC upgrades:
* Filament Spindle MK1 - We can laser cut most of these parts ourselves once the laser is running, the other parts are cheap. Solarbotics installed this on their makerbot, makes it a lot more usable > http://wiki.makerbot.com/spindle-mk1-assembly#toc29
* A new plastruder - the one on our Cupcake CNC is an old revision, we should upgrade to at least a MK6 > http://store.makerbot.com/stepstruder-mk6-plus.html. The kit is currently sold out, but Dana has a contact at Makerbot that we might be able to utilize for sourcing parts.
* New electronics to control the MK6 - This may be difficult to source as there aren't any new boards being produced for the cupcake CNC. Thus, we may have to go with a board developed by a third party > http://koti.kapsi.fi/~kliment/gen3plus/
* Z Crank - we can print it, tis a nice little tweak > http://www.thingiverse.com/thing:975

== Future Additions ==
* Use our existing 3D printers to print replacement parts for themselves
* Print parts for Prusa Mendel Kits
* Source non-printed parts for Prusa Mendel Kits
* Sell Prusa Mendel Kits

== USING THE 3D PRINTERS ==

RapMan:
* Raft must be set at 244 degrees celcius or higher, otherwise it will lift from print bed (this will be fixed once we have the heated bed)
* Object should be set 10 degrees hotter than raft to allow (somewhat) easy separation.

Makerbot Cupcake CNC

2012-06-23T06:37:32Z

19200baud: Formattng Changes

== Done ==

* printed crank handle [http://www.thingiverse.com/thing:2842 http://www.thingiverse.com/thing:2842]
* replaced Z axis stepper motor (smooth movement without binding)
* printed filament guide
* replaced acrylic idler wheel with aluminum wheel

== In Progress ==

* Printing parts for new extruder [http://www.thingiverse.com/thing:28175 http://www.thingiverse.com/thing:28175]
* Working on converting to stepper motor extruder
* Currently testing makeshift heated build platform, results are very positive. We now plan to etch and install a heated build platform pcb (Thingiverse #2041)
* Working on installing LED lighting inside unit

more info coming soon....

File:Makerbot cupcake before.jpg

2012-06-23T06:21:55Z

19200baud:

Makerbot Cupcake CNC

2012-05-19T01:18:41Z

19200baud: added links

== Done ==

* printed crank handle <nowiki>http://www.thingiverse.com/thing:2842</nowiki>
* replaced Z axis stepper motor (smooth movement without binding)
* printed filament guide
* replaced acrylic idler wheel with aluminum wheel

== In Progress ==

* Printing parts for new extruder <nowiki>http://www.thingiverse.com/thing:28175</nowiki>
* Working on converting to stepper motor extruder
* Currently testing makeshift heated build platform, results are very positive. We now plan to etch and install a heated build platform pcb (Thingiverse #2041)
* Working on installing LED lighting inside unit

more info coming soon....

Makerbot Cupcake CNC

2012-04-17T08:13:49Z

19200baud:

== Done ==

* printed crank handle (Thingiverse #2842)
* replaced Z axis stepper motor (smooth movement without binding)
* printed filament guide
* replaced acrylic idler wheel with aluminum wheel

== In Progress ==

* Printing parts for new extruder (Thingiverse #2175)
* Working on converting to stepper motor extruder
* Currently testing makeshift heated build platform, results are very positive. We now plan to etch and install a heated build platform pcb (Thingiverse #2041)
* Working on installing LED lighting inside unit

more info coming soon....

Makerbot Cupcake CNC

2012-04-17T08:11:18Z

19200baud:

== Done ==

* printed crank handle
* replaced Z axis stepper motor (smooth movement without binding)
* printed filament guide
* replaced acrylic idler wheel with aluminum wheel

== In Progress ==

* Printing parts for new extruder
* Working on converting to stepper motor extruder
* Currently testing makeshift heated build platform, results are very positive. We now plan to etch and install a heated build platform pcb
* Working on installing LED lighting inside unit

more info coming soon....

Makerbot Cupcake CNC

2012-04-17T08:06:56Z

19200baud: Created page with "more info coming soon...."

more info coming soon....

Tools we have

2012-04-12T05:05:14Z

19200baud: /* Electronics Tools */

==Notes==

Fill in any data you know of/own in the following suggested format (alphabetically):
# Tool Name (Brand/Color)
# Tool Owner/Donator name if any.
# Tool Ownership Status (Protospace property, on loan, semi-permanent loan [likely staying at PS but donor might take it back some day], private)
# Tool Status (working/needs fixing/finicky/etc)
# Tool Use Restrictions (Open to all, ask owner first, read instructions first, must be trained/certified).

Please add pictures too.

Also, please amalgamate old content at bottom to new format, removing the old as you go. Delete this message when complete.

Treat tools with respect and care! Also clean them up and put them back before you leave :)

==3D Printing/Cutting Tools==

* [http://farm7.staticflickr.com/6051/6374307163_30109e8947_o.jpg 80W Chinese Laser Cutter with a 4' x 3' cutting area] http://www.rabbitlaserusa.com/laser_RL1290.asp - Brian Queen - On Loan (August?) - Working - Must be certified
* [http://farm8.staticflickr.com/7033/6579843923_19329e76cb_z.jpg RapMan 3D Printer] - Brian Queen - ?? - ?? - ??
* Utilimaker 3D Printer - Brian Queen - ?? - Working okay, needs heated bed - ??

==Automotive Tools==

* Compressor (big) - ?? - ?? - Engine needs fixing - ??
* Floor Jack (Certified/blue) - Tremaine "Dexter" - semi-permanent loan - Working - Open To All
* Socket/Wrench Set - Ben Reed - PS Owned - Working - Open To All

==Electronics Tools==

* Oscilloscope (Kikusui COS5060 60Mhz) - ?? - ?? - ??
* Oscilloscope (Tektronics 2225 50Mhz) - ?? - ?? - ??
* Pick & Place (Multitroniks) - ?? - ?? - Needs Fixing(?) - ??
* Compressor (small/black) - circuithacker & 19200baud - Donated to PS - Working, but needs air tank & pressure switch to be complete - Intended for use with the Pick & Place primarily, if more info needed contact circuithacker at circuithacker@botzone.ca

==Metalworking Tools==

* Angle Grinder w/ case (Kawasaki/Green) - ?? - ?? - Working - ??
* Bench Grinder (Baldor/Red) - ?? - ?? - Working - ??
* Bench Grinder (Powerfist/Grey) - Tremaine "Dexter" - Donated to Protospace - Working - Open To All
* Drill Press - ?? - PS Owned - Working - ??
* Forge - ?? - ?? - ?? - ??
* Mill (big) (Craftex/Green) - ?? - ?? - Needs Gear Fix - ??
* [http://farm7.staticflickr.com/6239/6374306473_dbbca442d3_o.jpg Mill (small CNC) (MAXNC 10/blue)] - Brian Queen - ?? - ?? - ??
* Tap & Die set (Mastercraft) - ?? - ?? - Working - ??
* Vice (Irwin) - ?? - ?? - Working - ??

==Woodworking/Plastic Tools==

* Chop Saw (Ryobi/Blue) - ?? - ?? - Working - ??
* Cutoff Saw (B&D) - ?? - ?? - Working - ??
* Cutoff Saw (Red) - ?? - ?? - ?? - ??
* Corded Drill (Dewalt/Yellow - ?? - ?? - Working - ??
* Corded Dremel & Accessories - ?? - ?? - Working - ??
* Cordless Drill (Orange) - ?? - ?? - Working - ??
* Cordless Dremel & Case (Grey) - ?? - ?? - Working - ??
* Jiggaw (Skil/Black) - ?? - ?? - Working - ??
* Planer - ?? - ?? - ?? - ??
* Sander Mouse (Ryobi/Blue) - ?? - ?? - Working - ??
* Scroll Saw (Dremel/Grey) - ?? - ?? - Working - ??
* Scroll Saw (Mastercraft/Blue) - ?? - ?? - Working - ??
* Workmate - ?? - ?? - Working - ??

==Misc Tools==

* Sewing Machine (Singer 730) - ?? - ?? - Marginally Working - ??
* Sewing Machine (EuroPro) - ?? - ?? - Needs Fixing - ??
* Shop Vac (Orange) - ?? - ?? - ??
* Vacuum Former - ?? - ?? - Needs serious fixing/case - ??

==Old Content To Be Merged With Above==

===Protospace tools===
* [http://farm7.staticflickr.com/6096/6374306633_408dc5271e_o.jpg Makerbot cupcake CNC]

===Member tools and gadgets===
Tremaine:
* 4 1 ton vehicle jack stands
* metric ratchet set with 3/8" and 1/4" drivers (6mm to 19mm sockets)
* metric ratchet 1/2" driver, 1 short extender and 1 long, sockets from 12mm to 24mm (some deep impact)
* metric crescent wrenches 8mm - 24mm
* variety of wrenches, standard screwdrivers
* Metric hex key set
* tap & die set
* Heat gun
* Torque wrench
* Breaker bar with 1/2" driver

(more to be added)

Mike Hermann
* Hitachi 200 MHz digital scope
* Weller Adjustable soldering station
* 2 channel 30 VDC bench supply
* Current clamps for multimeter
* Std metal working handtools
* Std wood working handtools
* Makita LiON contractor pack (4 tool: rotary saw, sabre/sawsall, driver, drill)
* Paintgun (compressor driven)
* Rotary saw
* Jigsaw
* 2.5 T rollaway jack
* Metric and Imperial wrench set
* Large torque wrench
* Shop vac
* Dremel and kit
* Bit set (std drivers, allan key, torx, torx secure, etc)
* (more to be added)

Dan VE6IBM
* PA System
* 60 Mhz 3 channel scope
* Surface Mount Technology Hot Air Rework Station (with soldering tools)
* (more to be added)

Tools we have

2012-04-12T05:01:28Z

19200baud:

==Notes==

Fill in any data you know of/own in the following suggested format (alphabetically):
# Tool Name (Brand/Color)
# Tool Owner/Donator name if any.
# Tool Ownership Status (Protospace property, on loan, semi-permanent loan [likely staying at PS but donor might take it back some day], private)
# Tool Status (working/needs fixing/finicky/etc)
# Tool Use Restrictions (Open to all, ask owner first, read instructions first, must be trained/certified).

Please add pictures too.

Also, please amalgamate old content at bottom to new format, removing the old as you go. Delete this message when complete.

Treat tools with respect and care! Also clean them up and put them back before you leave :)

==3D Printing/Cutting Tools==

* [http://farm7.staticflickr.com/6051/6374307163_30109e8947_o.jpg 80W Chinese Laser Cutter with a 4' x 3' cutting area] http://www.rabbitlaserusa.com/laser_RL1290.asp - Brian Queen - On Loan (August?) - Working - Must be certified
* [http://farm8.staticflickr.com/7033/6579843923_19329e76cb_z.jpg RapMan 3D Printer] - Brian Queen - ?? - ?? - ??
* Utilimaker 3D Printer - Brian Queen - ?? - Working okay, needs heated bed - ??

==Automotive Tools==

* Compressor (big) - ?? - ?? - Engine needs fixing - ??
* Floor Jack (Certified/blue) - Tremaine "Dexter" - semi-permanent loan - Working - Open To All
* Socket/Wrench Set - Ben Reed - PS Owned - Working - Open To All

==Electronics Tools==

* Oscilloscope (Kikusui COS5060 60Mhz) - ?? - ?? - ??
* Oscilloscope (Tektronics 2225 50Mhz) - ?? - ?? - ??
* Pick & Place (Multitroniks) - ?? - ?? - Needs Fixing(?) - ??
* Compressor (small/black) - circuithacker & 19200baud - Donated to PS - Working, but needs air tank & pressure switch to be complete - Intended for use with the Pick & Place primarily, if more info needed [circuithacker@botzone.ca contact circuithacker]

==Metalworking Tools==

* Angle Grinder w/ case (Kawasaki/Green) - ?? - ?? - Working - ??
* Bench Grinder (Baldor/Red) - ?? - ?? - Working - ??
* Bench Grinder (Powerfist/Grey) - Tremaine "Dexter" - Donated to Protospace - Working - Open To All
* Drill Press - ?? - PS Owned - Working - ??
* Forge - ?? - ?? - ?? - ??
* Mill (big) (Craftex/Green) - ?? - ?? - Needs Gear Fix - ??
* [http://farm7.staticflickr.com/6239/6374306473_dbbca442d3_o.jpg Mill (small CNC) (MAXNC 10/blue)] - Brian Queen - ?? - ?? - ??
* Tap & Die set (Mastercraft) - ?? - ?? - Working - ??
* Vice (Irwin) - ?? - ?? - Working - ??

==Woodworking/Plastic Tools==

* Chop Saw (Ryobi/Blue) - ?? - ?? - Working - ??
* Cutoff Saw (B&D) - ?? - ?? - Working - ??
* Cutoff Saw (Red) - ?? - ?? - ?? - ??
* Corded Drill (Dewalt/Yellow - ?? - ?? - Working - ??
* Corded Dremel & Accessories - ?? - ?? - Working - ??
* Cordless Drill (Orange) - ?? - ?? - Working - ??
* Cordless Dremel & Case (Grey) - ?? - ?? - Working - ??
* Jiggaw (Skil/Black) - ?? - ?? - Working - ??
* Planer - ?? - ?? - ?? - ??
* Sander Mouse (Ryobi/Blue) - ?? - ?? - Working - ??
* Scroll Saw (Dremel/Grey) - ?? - ?? - Working - ??
* Scroll Saw (Mastercraft/Blue) - ?? - ?? - Working - ??
* Workmate - ?? - ?? - Working - ??

==Misc Tools==

* Sewing Machine (Singer 730) - ?? - ?? - Marginally Working - ??
* Sewing Machine (EuroPro) - ?? - ?? - Needs Fixing - ??
* Shop Vac (Orange) - ?? - ?? - ??
* Vacuum Former - ?? - ?? - Needs serious fixing/case - ??

==Old Content To Be Merged With Above==

===Protospace tools===
* [http://farm7.staticflickr.com/6096/6374306633_408dc5271e_o.jpg Makerbot cupcake CNC]

===Member tools and gadgets===
Tremaine:
* 4 1 ton vehicle jack stands
* metric ratchet set with 3/8" and 1/4" drivers (6mm to 19mm sockets)
* metric ratchet 1/2" driver, 1 short extender and 1 long, sockets from 12mm to 24mm (some deep impact)
* metric crescent wrenches 8mm - 24mm
* variety of wrenches, standard screwdrivers
* Metric hex key set
* tap & die set
* Heat gun
* Torque wrench
* Breaker bar with 1/2" driver

(more to be added)

Mike Hermann
* Hitachi 200 MHz digital scope
* Weller Adjustable soldering station
* 2 channel 30 VDC bench supply
* Current clamps for multimeter
* Std metal working handtools
* Std wood working handtools
* Makita LiON contractor pack (4 tool: rotary saw, sabre/sawsall, driver, drill)
* Paintgun (compressor driven)
* Rotary saw
* Jigsaw
* 2.5 T rollaway jack
* Metric and Imperial wrench set
* Large torque wrench
* Shop vac
* Dremel and kit
* Bit set (std drivers, allan key, torx, torx secure, etc)
* (more to be added)

Dan VE6IBM
* PA System
* 60 Mhz 3 channel scope
* Surface Mount Technology Hot Air Rework Station (with soldering tools)
* (more to be added)

Tools we have

2012-04-12T05:00:40Z

19200baud:

==Notes==

Fill in any data you know of/own in the following suggested format (alphabetically):
# Tool Name (Brand/Color)
# Tool Owner/Donator name if any.
# Tool Ownership Status (Protospace property, on loan, semi-permanent loan [likely staying at PS but donor might take it back some day], private)
# Tool Status (working/needs fixing/finicky/etc)
# Tool Use Restrictions (Open to all, ask owner first, read instructions first, must be trained/certified).

Please add pictures too.

Also, please amalgamate old content at bottom to new format, removing the old as you go. Delete this message when complete.

Treat tools with respect and care! Also clean them up and put them back before you leave :)

==3D Printing/Cutting Tools==

* [http://farm7.staticflickr.com/6051/6374307163_30109e8947_o.jpg 80W Chinese Laser Cutter with a 4' x 3' cutting area] http://www.rabbitlaserusa.com/laser_RL1290.asp - Brian Queen - On Loan (August?) - Working - Must be certified
* [http://farm8.staticflickr.com/7033/6579843923_19329e76cb_z.jpg RapMan 3D Printer] - Brian Queen - ?? - ?? - ??
* Utilimaker 3D Printer - Brian Queen - ?? - Working okay, needs heated bed - ??

==Automotive Tools==

* Compressor (big) - ?? - ?? - Engine needs fixing - ??
* Floor Jack (Certified/blue) - Tremaine "Dexter" - semi-permanent loan - Working - Open To All
* Socket/Wrench Set - Ben Reed - PS Owned - Working - Open To All

==Electronics Tools==

* Oscilloscope (Kikusui COS5060 60Mhz) - ?? - ?? - ??
* Oscilloscope (Tektronics 2225 50Mhz) - ?? - ?? - ??
* Pick & Place (Multitroniks) - ?? - ?? - Needs Fixing(?) - ??
* Compressor (small/black) - circuithacker & 19200baud - Donated to PS - Working, but needs air tank & pressure switch to be complete - Intended for use with the Pick & Place primarily, if more info needed contact circuithacker

==Metalworking Tools==

* Angle Grinder w/ case (Kawasaki/Green) - ?? - ?? - Working - ??
* Bench Grinder (Baldor/Red) - ?? - ?? - Working - ??
* Bench Grinder (Powerfist/Grey) - Tremaine "Dexter" - Donated to Protospace - Working - Open To All
* Drill Press - ?? - PS Owned - Working - ??
* Forge - ?? - ?? - ?? - ??
* Mill (big) (Craftex/Green) - ?? - ?? - Needs Gear Fix - ??
* [http://farm7.staticflickr.com/6239/6374306473_dbbca442d3_o.jpg Mill (small CNC) (MAXNC 10/blue)] - Brian Queen - ?? - ?? - ??
* Tap & Die set (Mastercraft) - ?? - ?? - Working - ??
* Vice (Irwin) - ?? - ?? - Working - ??

==Woodworking/Plastic Tools==

* Chop Saw (Ryobi/Blue) - ?? - ?? - Working - ??
* Cutoff Saw (B&D) - ?? - ?? - Working - ??
* Cutoff Saw (Red) - ?? - ?? - ?? - ??
* Corded Drill (Dewalt/Yellow - ?? - ?? - Working - ??
* Corded Dremel & Accessories - ?? - ?? - Working - ??
* Cordless Drill (Orange) - ?? - ?? - Working - ??
* Cordless Dremel & Case (Grey) - ?? - ?? - Working - ??
* Jiggaw (Skil/Black) - ?? - ?? - Working - ??
* Planer - ?? - ?? - ?? - ??
* Sander Mouse (Ryobi/Blue) - ?? - ?? - Working - ??
* Scroll Saw (Dremel/Grey) - ?? - ?? - Working - ??
* Scroll Saw (Mastercraft/Blue) - ?? - ?? - Working - ??
* Workmate - ?? - ?? - Working - ??

==Misc Tools==

* Sewing Machine (Singer 730) - ?? - ?? - Marginally Working - ??
* Sewing Machine (EuroPro) - ?? - ?? - Needs Fixing - ??
* Shop Vac (Orange) - ?? - ?? - ??
* Vacuum Former - ?? - ?? - Needs serious fixing/case - ??

==Old Content To Be Merged With Above==

===Protospace tools===
* [http://farm7.staticflickr.com/6096/6374306633_408dc5271e_o.jpg Makerbot cupcake CNC]

===Member tools and gadgets===
Tremaine:
* 4 1 ton vehicle jack stands
* metric ratchet set with 3/8" and 1/4" drivers (6mm to 19mm sockets)
* metric ratchet 1/2" driver, 1 short extender and 1 long, sockets from 12mm to 24mm (some deep impact)
* metric crescent wrenches 8mm - 24mm
* variety of wrenches, standard screwdrivers
* Metric hex key set
* tap & die set
* Heat gun
* Torque wrench
* Breaker bar with 1/2" driver

(more to be added)

Mike Hermann
* Hitachi 200 MHz digital scope
* Weller Adjustable soldering station
* 2 channel 30 VDC bench supply
* Current clamps for multimeter
* Std metal working handtools
* Std wood working handtools
* Makita LiON contractor pack (4 tool: rotary saw, sabre/sawsall, driver, drill)
* Paintgun (compressor driven)
* Rotary saw
* Jigsaw
* 2.5 T rollaway jack
* Metric and Imperial wrench set
* Large torque wrench
* Shop vac
* Dremel and kit
* Bit set (std drivers, allan key, torx, torx secure, etc)
* (more to be added)

Dan VE6IBM
* PA System
* 60 Mhz 3 channel scope
* Surface Mount Technology Hot Air Rework Station (with soldering tools)
* (more to be added)