Protospace Wiki - User contributions [en]

Event calendar

2019-11-05T04:02:08Z

Cjs: added rabbit course on 2019-11-09

__FORCETOC__
==November 2019==

{{calendar legend}}
{| class="wikitable" style="width:100%;"
! style="min-width:150px; width:14.2857%;" | Sunday
! style="min-width:150px; width:14.2857%;" | Monday
! style="min-width:150px; width:14.2857%;" | Tuesday
! style="min-width:150px; width:14.2857%;" | Wednesday
! style="min-width:150px; width:14.2857%;" | Thursday
! style="min-width:150px; width:14.2857%;" | Friday
! style="min-width:150px; width:14.2857%;" | Saturday
|- style="height:100px; vertical-align:top;"
|
|
|
|
|
| '''1'''
| '''2'''
{{event member|--:--|[https://groups.google.com/forum/#!topic/protospace-discuss/XZXIiu2USoM Extra Life LAN Party]}}
|- style="height:100px; vertical-align:top;"
| '''3'''
{{event training|09:00|[https://groups.google.com/forum/#!msg/protospace-administration/th_yQqE0Phs/6DcwAhGPCgAJ Intro to Electronics 2]}}
| '''4'''
{{event training|19:30|[https://my.protospace.ca/school/classdetails/13454 New Member Orientation]}}
| '''5'''
{{event open house|19:00|Meet & Geek}}
| '''6'''
| '''7'''
| '''8'''
| '''9'''
{{event training|12:00|[https://my.protospace.ca/school/classdetails/13456 Laser Cutting and Engraving]}}
|- style="height:100px; vertical-align:top;"
| '''10'''
| '''11'''
| '''12'''
{{event open house|19:00|Meet & Geek}}
| '''13'''
| '''14'''
| '''15'''
| '''16'''
{{event clean|10:00|Monthly Clean}}
|- style="height:100px; vertical-align:top;"
| '''17'''
| '''18'''
| '''19'''
{{event open house|19:00|Meet & Geek}}
| '''20'''
{{event training|19:30|[https://my.protospace.ca/school/classdetails/13455 New Member Orientation]}}
| '''21'''
{{event meeting|19:03|Members' Meeting}}
| '''22'''
| '''23'''
|- style="height:100px; vertical-align:top;"
| '''24'''
| '''25'''
| '''26'''
{{event open house|19:00|Meet & Geek}}
| '''27'''
| '''28'''
| '''29'''
| '''30'''
{{event training|09:00|[https://my.protospace.ca/school/classdetails/13395 Metal Cutting & Manual Lathe]}}
|}

==December 2019==

{{calendar legend}}
{| class="wikitable" style="width:100%;"
! style="min-width:150px; width:14.2857%;" | Sunday
! style="min-width:150px; width:14.2857%;" | Monday
! style="min-width:150px; width:14.2857%;" | Tuesday
! style="min-width:150px; width:14.2857%;" | Wednesday
! style="min-width:150px; width:14.2857%;" | Thursday
! style="min-width:150px; width:14.2857%;" | Friday
! style="min-width:150px; width:14.2857%;" | Saturday
|- style="height:100px; vertical-align:top;"
| '''1'''
| '''2'''
| '''3'''
{{event open house|19:00|Meet & Geek}}
| '''4'''
| '''5'''
| '''6'''
| '''7'''
|- style="height:100px; vertical-align:top;"
| '''8'''
| '''9'''
| '''10'''
{{event open house|19:00|Meet & Geek}}
| '''11'''
| '''12'''
| '''13'''
| '''14'''
{{event training|09:00|[https://my.protospace.ca/school/classdetails/13398 Manual Mill & Advanced Lathe]}}
|- style="height:100px; vertical-align:top;"
| '''15'''
| '''16'''
| '''17'''
{{event open house|19:00|Meet & Geek}}
| '''18'''
{{event meeting|19:03|Members' Meeting}}
| '''19'''
| '''20'''
| '''21'''
{{event clean|10:00|Monthly Clean}}
|- style="height:100px; vertical-align:top;"
| '''22'''
| '''23'''
| '''24'''
| '''25'''
| '''26'''
| '''27'''
| '''28'''
|- style="height:100px; vertical-align:top;"
| '''29'''
| '''30'''
| '''31'''
|
|
|
|
|}

==January 2020==

{{calendar legend}}
{| class="wikitable" style="width:100%;"
! style="min-width:150px; width:14.2857%;" | Sunday
! style="min-width:150px; width:14.2857%;" | Monday
! style="min-width:150px; width:14.2857%;" | Tuesday
! style="min-width:150px; width:14.2857%;" | Wednesday
! style="min-width:150px; width:14.2857%;" | Thursday
! style="min-width:150px; width:14.2857%;" | Friday
! style="min-width:150px; width:14.2857%;" | Saturday
|- style="height:100px; vertical-align:top;"
|
|
|
| '''1'''
| '''2'''
| '''3'''
| '''4'''
|- style="height:100px; vertical-align:top;"
| '''5'''
| '''6'''
| '''7'''
{{event open house|19:00|Meet & Geek}}
| '''8'''
| '''9'''
| '''10'''
| '''11'''
|- style="height:100px; vertical-align:top;"
| '''12'''
| '''13'''
| '''14'''
{{event open house|19:00|Meet & Geek}}
| '''15'''
| '''16'''
{{event meeting|19:03|Members' Meeting}}
| '''17'''
| '''18'''
{{event clean|10:00|Monthly Clean}}
|- style="height:100px; vertical-align:top;"
| '''19'''
| '''20'''
| '''21'''
{{event open house|19:00|Meet & Geek}}
| '''22'''
| '''23'''
| '''24'''
| '''25'''
|- style="height:100px; vertical-align:top;"
| '''26'''
| '''27'''
| '''28'''
{{event open house|19:00|Meet & Geek}}
| '''29'''
| '''30'''
| '''31'''
|
|}

[[Category:Calendar]]

Template:Calendar

2019-11-01T08:36:34Z

Cjs: removed problematic newline

<includeonly>{{calendar legend}}
{| class="wikitable" style="width:100%;"
! style="min-width:150px; width:14.2857%;" | Sunday
! style="min-width:150px; width:14.2857%;" | Monday
! style="min-width:150px; width:14.2857%;" | Tuesday
! style="min-width:150px; width:14.2857%;" | Wednesday
! style="min-width:150px; width:14.2857%;" | Thursday
! style="min-width:150px; width:14.2857%;" | Friday
! style="min-width:150px; width:14.2857%;" | Saturday
|- style="height:100px; vertical-align:top;"
|
|
|
{{event open house|19:00|Meet & Geek}}
|
|
|
|
|- style="height:100px; vertical-align:top;"
|
|
|
{{event open house|19:00|Meet & Geek}}
|
|
|
|
|- style="height:100px; vertical-align:top;"
|
|
|
{{event open house|19:00|Meet & Geek}}
|
|
|
|
|- style="height:100px; vertical-align:top;"
|
|
|
{{event open house|19:00|Meet & Geek}}
|
|
|
|
|- style="height:100px; vertical-align:top;"
|
|
|
{{event open house|19:00|Meet & Geek}}
|
|
|
|
|- style="height:100px; vertical-align:top;"
|
|
|
|
|
|
|
|}</includeonly>
<noinclude>
This template will create a blank calendar. The calendar can be added to a page by typing <code><nowiki>{{subst:calendar}}</nowiki></code> where you want it to appear. The page should then be saved, and when you edit the page again the calendar will be there. The numbers will need to be added manually. The markup for each row of the calendar will initially look like this:

<pre>
|- style="height:100px; vertical-align:top;"
|
|
|
|
|
|
|
</pre>

For example, if the the first day of the month was a Tuesday, the first row should be edited to look like this:

<pre>
|- style="height:100px; vertical-align:top;"
| 
| 
| '''1''' 
| '''2'''
| '''3'''
| '''4'''
| '''5'''
</pre>

The three apostrophes on either side of the numbers will make them bold, which helps them to stand out from the events listed on the calendar. The calendar has six rows by default, the last one should be removed manually if it is not needed.
[[Category:Calendar templates]]
</noinclude>

Event calendar

2019-11-01T08:35:15Z

Cjs: removed october calendar

__FORCETOC__
==November 2019==

{{calendar legend}}
{| class="wikitable" style="width:100%;"
! style="min-width:150px; width:14.2857%;" | Sunday
! style="min-width:150px; width:14.2857%;" | Monday
! style="min-width:150px; width:14.2857%;" | Tuesday
! style="min-width:150px; width:14.2857%;" | Wednesday
! style="min-width:150px; width:14.2857%;" | Thursday
! style="min-width:150px; width:14.2857%;" | Friday
! style="min-width:150px; width:14.2857%;" | Saturday
|- style="height:100px; vertical-align:top;"
|
|
|
|
|
| '''1'''
| '''2'''
{{event member|--:--|[https://groups.google.com/forum/#!topic/protospace-discuss/XZXIiu2USoM Extra Life LAN Party]}}
|- style="height:100px; vertical-align:top;"
| '''3'''
{{event training|09:00|[https://groups.google.com/forum/#!msg/protospace-administration/th_yQqE0Phs/6DcwAhGPCgAJ Intro to Electronics 2]}}
| '''4'''
{{event training|19:30|[https://my.protospace.ca/school/classdetails/13454 New Member Orientation]}}
| '''5'''
{{event open house|19:00|Meet & Geek}}
| '''6'''
| '''7'''
| '''8'''
| '''9'''
|- style="height:100px; vertical-align:top;"
| '''10'''
| '''11'''
| '''12'''
{{event open house|19:00|Meet & Geek}}
| '''13'''
| '''14'''
| '''15'''
| '''16'''
{{event clean|10:00|Monthly Clean}}
|- style="height:100px; vertical-align:top;"
| '''17'''
| '''18'''
| '''19'''
{{event open house|19:00|Meet & Geek}}
| '''20'''
{{event training|19:30|[https://my.protospace.ca/school/classdetails/13455 New Member Orientation]}}
| '''21'''
{{event meeting|19:03|Members' Meeting}}
| '''22'''
| '''23'''
|- style="height:100px; vertical-align:top;"
| '''24'''
| '''25'''
| '''26'''
{{event open house|19:00|Meet & Geek}}
| '''27'''
| '''28'''
| '''29'''
| '''30'''
{{event training|09:00|[https://my.protospace.ca/school/classdetails/13395 Metal Cutting & Manual Lathe]}}
|}

==December 2019==

{{calendar legend}}
{| class="wikitable" style="width:100%;"
! style="min-width:150px; width:14.2857%;" | Sunday
! style="min-width:150px; width:14.2857%;" | Monday
! style="min-width:150px; width:14.2857%;" | Tuesday
! style="min-width:150px; width:14.2857%;" | Wednesday
! style="min-width:150px; width:14.2857%;" | Thursday
! style="min-width:150px; width:14.2857%;" | Friday
! style="min-width:150px; width:14.2857%;" | Saturday
|- style="height:100px; vertical-align:top;"
| '''1'''
| '''2'''
| '''3'''
{{event open house|19:00|Meet & Geek}}
| '''4'''
| '''5'''
| '''6'''
| '''7'''
|- style="height:100px; vertical-align:top;"
| '''8'''
| '''9'''
| '''10'''
{{event open house|19:00|Meet & Geek}}
| '''11'''
| '''12'''
| '''13'''
| '''14'''
{{event training|09:00|[https://my.protospace.ca/school/classdetails/13398 Manual Mill & Advanced Lathe]}}
|- style="height:100px; vertical-align:top;"
| '''15'''
| '''16'''
| '''17'''
{{event open house|19:00|Meet & Geek}}
| '''18'''
{{event meeting|19:03|Members' Meeting}}
| '''19'''
| '''20'''
| '''21'''
{{event clean|10:00|Monthly Clean}}
|- style="height:100px; vertical-align:top;"
| '''22'''
| '''23'''
| '''24'''
| '''25'''
| '''26'''
| '''27'''
| '''28'''
|- style="height:100px; vertical-align:top;"
| '''29'''
| '''30'''
| '''31'''
|
|
|
|
|}

==January 2020==

{{calendar legend}}
{| class="wikitable" style="width:100%;"
! style="min-width:150px; width:14.2857%;" | Sunday
! style="min-width:150px; width:14.2857%;" | Monday
! style="min-width:150px; width:14.2857%;" | Tuesday
! style="min-width:150px; width:14.2857%;" | Wednesday
! style="min-width:150px; width:14.2857%;" | Thursday
! style="min-width:150px; width:14.2857%;" | Friday
! style="min-width:150px; width:14.2857%;" | Saturday
|- style="height:100px; vertical-align:top;"
|
|
|
| '''1'''
| '''2'''
| '''3'''
| '''4'''
|- style="height:100px; vertical-align:top;"
| '''5'''
| '''6'''
| '''7'''
{{event open house|19:00|Meet & Geek}}
| '''8'''
| '''9'''
| '''10'''
| '''11'''
|- style="height:100px; vertical-align:top;"
| '''12'''
| '''13'''
| '''14'''
{{event open house|19:00|Meet & Geek}}
| '''15'''
| '''16'''
{{event meeting|19:03|Members' Meeting}}
| '''17'''
| '''18'''
{{event clean|10:00|Monthly Clean}}
|- style="height:100px; vertical-align:top;"
| '''19'''
| '''20'''
| '''21'''
{{event open house|19:00|Meet & Geek}}
| '''22'''
| '''23'''
| '''24'''
| '''25'''
|- style="height:100px; vertical-align:top;"
| '''26'''
| '''27'''
| '''28'''
{{event open house|19:00|Meet & Geek}}
| '''29'''
| '''30'''
| '''31'''
|
|}

[[Category:Calendar]]

Event calendar

2019-10-29T08:16:02Z

Cjs: added new member orientation on 2019-11-04 and 2019-11-20

==October 2019==

{{calendar legend}}

{| class="wikitable" style="width:100%;"
! style="min-width:150px; width:14.2857%;" | Sunday
! style="min-width:150px; width:14.2857%;" | Monday
! style="min-width:150px; width:14.2857%;" | Tuesday
! style="min-width:150px; width:14.2857%;" | Wednesday
! style="min-width:150px; width:14.2857%;" | Thursday
! style="min-width:150px; width:14.2857%;" | Friday
! style="min-width:150px; width:14.2857%;" | Saturday
|- style="height:100px; vertical-align:top;"
|
|
| '''1'''
{{event open house|19:00|Meet & Geek}}
| '''2'''
| '''3'''
| '''4'''
{{event training|17:30|[https://my.protospace.ca/school/classdetails/13449 Laser Cutting and Engraving]}}
{{event training|19:30|[https://my.protospace.ca/school/classdetails/13444 New Member Orientation]}}
| '''5'''
{{event training|09:00|[https://my.protospace.ca/school/classdetails/13397 Manual Mill & Advanced Lathe]}}
|- style="height:100px; vertical-align:top;"
| '''6'''
| '''7'''
| '''8'''
{{event open house|19:00|Meet & Geek}}
| '''9'''
{{event training|19:00|[https://my.protospace.ca/school/classdetails/13450 Trotec Course]}}
| '''10'''
| '''11'''
| '''12'''
|- style="height:100px; vertical-align:top;"
| '''13'''
{{event training|14:30|[https://my.protospace.ca/school/classdetails/13445 New Member Orientation]}}
| '''14'''
| '''15'''
{{event open house|19:00|Meet & Geek}}
| '''16'''
{{event meeting|19:03|[https://groups.google.com/forum/#!topic/protospace-administration/otn9b-GwauA Members' Meeting]}}
| '''17'''
{{event training|18:00|[https://my.protospace.ca/school/classdetails/13451 Woodworking 1]}}
{{event training|20:00|[https://my.protospace.ca/school/classdetails/13452 Woodworking 2]}}
| '''18'''
| '''19'''
{{event clean|10:00|Monthly Clean}}
|- style="height:100px; vertical-align:top;"
| '''20'''
| '''21'''
| '''22'''
{{event open house|19:00|Meet & Geek}}
| '''23'''
| '''24'''
| '''25'''
{{event training|19:30|[https://my.protospace.ca/school/classdetails/13453 New Member Orientation]}}
| '''26'''
|- style="height:100px; vertical-align:top;"
| '''27'''
| '''28'''
| '''29'''
{{event open house|19:00|Meet & Geek}}
| '''30'''
| '''31'''
|
|
|}

==November 2019==

{{calendar legend}}

{| class="wikitable" style="width:100%;"
! style="min-width:150px; width:14.2857%;" | Sunday
! style="min-width:150px; width:14.2857%;" | Monday
! style="min-width:150px; width:14.2857%;" | Tuesday
! style="min-width:150px; width:14.2857%;" | Wednesday
! style="min-width:150px; width:14.2857%;" | Thursday
! style="min-width:150px; width:14.2857%;" | Friday
! style="min-width:150px; width:14.2857%;" | Saturday
|- style="height:100px; vertical-align:top;"
|
|
|
|
|
| '''1'''
| '''2'''
{{event member|--:--|[https://groups.google.com/forum/#!topic/protospace-discuss/XZXIiu2USoM Extra Life LAN Party]}}
|- style="height:100px; vertical-align:top;"
| '''3'''
{{event training|09:00|[https://groups.google.com/forum/#!msg/protospace-administration/th_yQqE0Phs/6DcwAhGPCgAJ Intro to Electronics 2]}}
| '''4'''
{{event training|19:30|[https://my.protospace.ca/school/classdetails/13454 New Member Orientation]}}
| '''5'''
{{event open house|19:00|Meet & Geek}}
| '''6'''
| '''7'''
| '''8'''
| '''9'''
|- style="height:100px; vertical-align:top;"
| '''10'''
| '''11'''
| '''12'''
{{event open house|19:00|Meet & Geek}}
| '''13'''
| '''14'''
| '''15'''
| '''16'''
{{event clean|10:00|Monthly Clean}}
|- style="height:100px; vertical-align:top;"
| '''17'''
| '''18'''
| '''19'''
{{event open house|19:00|Meet & Geek}}
| '''20'''
{{event training|19:30|[https://my.protospace.ca/school/classdetails/13455 New Member Orientation]}}
| '''21'''
{{event meeting|19:03|Members' Meeting}}
| '''22'''
| '''23'''
|- style="height:100px; vertical-align:top;"
| '''24'''
| '''25'''
| '''26'''
{{event open house|19:00|Meet & Geek}}
| '''27'''
| '''28'''
| '''29'''
| '''30'''
{{event training|09:00|[https://my.protospace.ca/school/classdetails/13395 Metal Cutting & Manual Lathe]}}
|}

==December 2019==

{{calendar legend}}

{| class="wikitable" style="width:100%;"
! style="min-width:150px; width:14.2857%;" | Sunday
! style="min-width:150px; width:14.2857%;" | Monday
! style="min-width:150px; width:14.2857%;" | Tuesday
! style="min-width:150px; width:14.2857%;" | Wednesday
! style="min-width:150px; width:14.2857%;" | Thursday
! style="min-width:150px; width:14.2857%;" | Friday
! style="min-width:150px; width:14.2857%;" | Saturday
|- style="height:100px; vertical-align:top;"
| '''1'''
| '''2'''
| '''3'''
{{event open house|19:00|Meet & Geek}}
| '''4'''
| '''5'''
| '''6'''
| '''7'''
|- style="height:100px; vertical-align:top;"
| '''8'''
| '''9'''
| '''10'''
{{event open house|19:00|Meet & Geek}}
| '''11'''
| '''12'''
| '''13'''
| '''14'''
{{event training|09:00|[https://my.protospace.ca/school/classdetails/13398 Manual Mill & Advanced Lathe]}}
|- style="height:100px; vertical-align:top;"
| '''15'''
| '''16'''
| '''17'''
{{event open house|19:00|Meet & Geek}}
| '''18'''
{{event meeting|19:03|Members' Meeting}}
| '''19'''
| '''20'''
| '''21'''
{{event clean|10:00|Monthly Clean}}
|- style="height:100px; vertical-align:top;"
| '''22'''
| '''23'''
| '''24'''
| '''25'''
| '''26'''
| '''27'''
| '''28'''
|- style="height:100px; vertical-align:top;"
| '''29'''
| '''30'''
| '''31'''
|
|
|
|
|}

==January 2020==

{{calendar legend}}

{| class="wikitable" style="width:100%;"
! style="min-width:150px; width:14.2857%;" | Sunday
! style="min-width:150px; width:14.2857%;" | Monday
! style="min-width:150px; width:14.2857%;" | Tuesday
! style="min-width:150px; width:14.2857%;" | Wednesday
! style="min-width:150px; width:14.2857%;" | Thursday
! style="min-width:150px; width:14.2857%;" | Friday
! style="min-width:150px; width:14.2857%;" | Saturday
|- style="height:100px; vertical-align:top;"
|
|
|
| '''1'''
| '''2'''
| '''3'''
| '''4'''
|- style="height:100px; vertical-align:top;"
| '''5'''
| '''6'''
| '''7'''
{{event open house|19:00|Meet & Geek}}
| '''8'''
| '''9'''
| '''10'''
| '''11'''
|- style="height:100px; vertical-align:top;"
| '''12'''
| '''13'''
| '''14'''
{{event open house|19:00|Meet & Geek}}
| '''15'''
| '''16'''
{{event meeting|19:03|Members' Meeting}}
| '''17'''
| '''18'''
{{event clean|10:00|Monthly Clean}}
|- style="height:100px; vertical-align:top;"
| '''19'''
| '''20'''
| '''21'''
{{event open house|19:00|Meet & Geek}}
| '''22'''
| '''23'''
| '''24'''
| '''25'''
|- style="height:100px; vertical-align:top;"
| '''26'''
| '''27'''
| '''28'''
{{event open house|19:00|Meet & Geek}}
| '''29'''
| '''30'''
| '''31'''
|
|}

[[Category:Calendar]]

Pocket hole jig (Kreg K3) ID:140

2019-10-28T04:23:30Z

Cjs: minor reformatting

{{Equipment page
| toolname = Pocket hole jig
| model = Kreg K3
| serial =
| owner = Nick Boers
| loanstatus = Semi-permanent
| arrived = 2019-10
| location = Woodshop shelf on east wall with other plastic carrying cases
| status = Working
| permission = Open to all
| certification = Read the manual
| id = 140
}}

Tools we have

2019-10-28T04:17:31Z

Cjs: updated link to 140

'''Adding a new tool to the wiki?''' Follow this [[Adding New Tools Procedure|procedure]].

We can always use new tools! Please feel free to [[List of links and email addresses|contact Protospace]] to donate, arrange for pickup, or drop them off in person.

If you are interested in knowing what kind of tools we are looking for, we also have a member-managed [[Tools we want|tool wishlist]], but your best bet on figuring out if we want something is simply asking on our [https://groups.google.com/forum/#!forum/protospace-discuss discussion group].

We also have [[:Category:Tools|an alphabetically ordered and categorized tool catalog]].

{{Warning|Treat the tools at Protospace with respect! Clean, functioning tools make for a happy crowd.}}

==Rapid prototyping tools==

: ''Comparisons: [[our 3D printers]], [[our laser cutters]]''

<gallery>

File:2.jpg |link=2 |[[3D printer, FFF (ORD Bot Hadron) ID:2]]
File:125.jpg |link=125 |[[3D printer, FFF (ORD Bot Hadron) ID:125]]
File:126.jpg |link=126 |[[3D printer, FFF (ORD Bot Hadron) ID:126]]
File:3.jpg |link=3 |[[3D printer, FFF (PrusaMD) ID:3]]
File:4.jpg |link=4 |[[3D printer, FFF, delta (Kossel) ID:4]]
File:6.jpg |link=6 |[[Laser cutter, large (Rabbit Laser RL-80-1290) ID:6]]
File:107.jpg |link=107 |[[Laser cutter (Trotec Speedy 300) ID:107]]
</gallery>

==Automotive tools==

<gallery>

File:8.jpg |link=8 |[[Floor jack, blue ID:8]]
File:9.jpg |link=9 |[[Trolley jack and axle stand kit (Certified) ID:9]]
File:11.jpg |link=11 |[[Socket set ID:11]]
</gallery>

==Chemistry==

<gallery>

File:12.jpg |link=12 |[[Oxygen concentrator (OGSI OG-15) ID:12]]
</gallery>

==Electronics tools==

<gallery>

File:13.jpg |link=13 |[[Counter (Fluke 1910A Multi-Counter) ID:13]]
File:14.jpg |link=14 |[[Counter (Lafayette 54517) ID:14]]
File:15.jpg |link=15 |[[Decade box, capacitance (Servomex Controls Decade Capacitor Type B) ID:15]]
File:16.jpg |link=16 |[[Function generator (John's) ID:16]]
File:18.jpg |link=18 |[[Heat gun (Powerfist) ID:18]]
File:19.jpg |link=19 |[[Logic analyzer (HP 1631D) ID:19]]
File:20.jpg |link=20 |[[Multimeter, digital (Pro.Point 8344665) ID:20]]
File:21.jpg |link=21 |[[Oscilloscope (Brunelle 2925) ID:21]]
File:22.jpg |link=22 |[[Oscilloscope (Kikusui COS 5060) ID:22]]
File:23.jpg |link=23 |[[Oscilloscope (Tektronix 2225) ID:23]]
File:24.jpg |link=24 |[[Oscilloscope (Tektronix 2465A) ID:24]]
File:25.jpg |link=25 |[[Oscilloscope, PC (Syscomp DSO-101) ID:25]]
File:26.jpg |link=26 |[[Power supply, bench (GQ Electronics GQ-A305D) ID:26]]
File:27.jpg |link=27 |[[Power supply, bench, 500 V (Heathkit PS-3) ID:27]]
File:28.jpg |link=28 |[[Power supply, bench, 2-channel (TENMA 72-7245) ID:28]]
File:29.jpg |link=29 |[[Reflow oven (Hamilton Beach) ID:29]]
File:30.jpg |link=30 |[[Hot-air rework station (GQ Electronics 5200) ID:30]]
File:31.jpg |link=31 |[[Solder fume extractor (Metcal) ID:31]]
File:32.jpg |link=32 |[[UV photomasker (Dan's) ID:32]]
File:33.jpg |link=33 |[[Waveform generator (Syscomp WGM-101) ID:33]]
File:34.jpg |link=34 |[[Waveform monitor (Tektronix 1730) ID:34]]
</gallery>

==Metalworking tools==

<gallery>

File:35.jpg |link=35 |[[Angle grinder (DeWalt) ID:35]]
File:36.jpg |link=36 |[[Anvil (Chris's) ID:36]]
File:37.jpg |link=37 |[[Bandsaw, metal, horizontal ID:37]]
File:38.jpg |link=38 |[[Bench grinder (Baldor) ID:38]]
File:39.jpg |link=39 |[[Bench grinder (Powerfist) ID:39]]
File:40.jpg |link=40 |[[Bench grinder (Trademaster PR14210) ID:40]]
File:41.jpg |link=41 |[[Brake, box and pan, 24" (Magnum) ID:41]]
File:42.jpg |link=42 |[[Drill press (Mastercraft) ID:42]]
File:44.jpg |link=44 |[[Forge, propane, pass-through ID:44]]
File:45.jpg |link=45 |[[Foundry, propane ID:45]]
File:121.jpg |link=121 |[[Hydraulic press, 50-ton, electric ID:121]]
File:46.jpg |link=46 |[[Lathe, metal (Challenger 1660G) ID:46]]
File:47.jpg |link=47 |[[Lathe, miniature (Taig Microlathe II) ID:47]]
File:53.jpg |link=53 |[[Metal shear (Magnum) ID:53]]
File:48.jpg |link=48 |[[Milling machine (ACRA AM4V) ID:48]]
File:49.jpg |link=49 |[[Milling machine, CNC (Tormach PCNC 1100) ID:49]]
File:51.jpg |link=51 |[[Plasma cutter, huge (Powercut 1500) ID:51]]
File:52.jpg |link=52 |[[Plasma cutter, small (Miller Spectrum 375) ID:52]]
File:54.jpg |link=54 |[[Vise, giant ID:54]]
File:56.jpg |link=56 |[[Welding magnets ID:56]]
File:96.jpg |link=96 |[[Spot welder ID:96]]
</gallery>

==Woodworking and plasticworking tools==

<gallery>

File:57.jpg |link=57 |[[Bandsaw, green ID:57]]
File:105.jpg |link=105 |[[Bandsaw (Shop Fox W1706) ID:105]]
File:58.jpg |link=58 |[[Belt and disc sander (CWD 15-315) ID:58]]
File:59.jpg |link=59 |[[Clamps ID:59]]
File:60.jpg |link=60 |[[Drill, hand, corded (Black & Decker) ID:60]]
File:61.jpg |link=61 |[[Drill, hand, corded, black (Jobmate) ID:61]]
File:62.jpg |link=62 |[[Drill, hand, corded, dark blue (Ryobi) ID:62]]
File:63.jpg |link=63 |[[Drill, hand, cordless (Black & Decker) ID:63]]
File:64.jpg |link=64 |[[Drill, hand, cordless (Black & Decker FireStorm) ID:64]]
File:65.jpg |link=65 |[[Drill, hand, cordless, with detachable chuck (Black & Decker FireStorm) ID:65]]
File:66.jpg |link=66 |[[Drill, hand, cordless, with quick connector (Black & Decker FireStorm) ID:66]]
File:67.jpg |link=67 |[[Drill, hand, cordless (DeWalt) ID:67]]
File:68.jpg |link=68 |[[Drill, hand, corded (Makita DP3720) ID:68]]
File:69.jpg |link=69 |[[Drill press, 8" (Jobmate) ID:69]]
File:70.jpg |link=70 |[[Jigsaw, corded (Black & Decker) ID:70]]
File:71.jpg |link=71 |[[Jigsaw, cordless (Black & Decker FireStorm) ID:71]]
File:72.jpg |link=72 |[[Jigsaw (Skil) ID:72]]
File:73.jpg |link=73 |[[Jointer, grey ID:73]]
File:74.jpg |link=74 |[[Miter saw, compound, sliding (Hitachi) ID:74]]
File:75.jpg |link=75 |[[Nailer, pneumatic, 2-in-1 ID:75]]
File:108.jpg |link=108 |[[Planer (Jet JPM-13CS) ID:108]]
File:76.jpg |link=76 |[[Plate joiner (Porter Cable 557) ID:76]]
File:140.jpg |link=140 |[[Pocket hole jig (Kreg K3) ID:140]]
File:77.jpg |link=77 |[[Radial arm saw (Craftsman) ID:77]]
File:78.jpg |link=78 |[[Rotary tool, corded (Mastercraft) ID:78]]
File:79.jpg |link=79 |[[Rotary tool, cordless (Dremel) ID:79]]
File:80.jpg |link=80 |[[Router table (Craftsman) ID:80]]
File:124.jpg |link=124 |[[Router table (Jeff's) ID:124]]
File:82.jpg |link=82 |[[Sabre saw (Black & Decker FireStorm) ID:82]]
File:83.jpg |link=83 |[[Sander, belt (Makita 9402) ID:83]]
File:84.jpg |link=84 |[[Sander, belt/disc (Dremel 730) ID:84]]
File:85.jpg |link=85 |[[Sander, detail (Ryobi) ID:85]]
File:106.jpg |link=106 |[[Sander, drum (General International 15-250 M1) ID:106]]
File:86.jpg |link=86 |[[Sander, hand, cordless (Black & Decker FireStorm) ID:86]]
File:138.jpg |link=138 |[[138|Sander, random orbital (Ridgid R2601) ID:138]]
File:139.jpg |link=139 |[[139|Sander, random orbital (Ridgid R2601) ID:139]]
File:88.jpg |link=88 |[[Sander, straight-line/orbital (Black & Decker Deluxe) ID:88]]
File:89.jpg |link=89 |[[Scroll saw (Dremel) ID:89]]
File:90.jpg |link=90 |[[Scroll saw (Mastercraft 55-6714-6) ID:90]]
File:91.jpg |link=91 |[[Table saw (Craftex CX201) ID:91]]
File:92.jpg |link=92 |[[Thickness planer (Ryobi AP1301) ID:92]]
File:93.jpg |link=93 |[[Vacuum, sawdust (Craftex CX404) ID:93]]
File:94.jpg |link=94 |[[Vise, wood ID:94]]
File:95.jpg |link=95 |[[Vise, wood (Travis's) ID:95]]
</gallery>

==Measuring and inspection tools==

See also the [[#Electronics Tools|Electronics Tools section on this page]] for electrical and electronic measurement and test equipment.

<gallery>

File:97.jpg |link=97 |[[Inspection mirror, 18" gooseneck ID:97]]
File:98.jpg |link=98 |[[Magnifier lamp, large, with lid ID:98]]
File:99.jpg |link=99 |[[Magnifier lamp, large, without lid ID:99]]
File:100.jpg |link=100 |[[Magnifier lamp, small, with lid ID:100]]
File:101.jpg |link=101 |[[Measuring tapes ID:101]]
File:102.jpg |link=102 |[[Rulers ID:102]]
File:103.jpg |link=103 |[[Squares ID:103]]
File:104.jpg |link=104 |[[Thermometer, infrared (H64) ID:104]]
</gallery>

==Miscellaneous tools==

<gallery>

File:110.jpg |link=110 |[[Air compressor, 60-gallon (Campbell Hausfeld) ID:110]]
File:111.jpg |link=111 |[[Air compressor, 80-gallon (MAXair Premium) ID:111]]
File:112.jpg |link=112 |[[Air compressor, silent ID:112]]
File:113.jpg |link=113 |[[Air pump, foot-operated (Bell FootPumper) ID:113]]
File:115.jpg |link=115 |[[Engraver ID:115]]
File:116.jpg |link=116 |[[Hand truck, red ID:116]]
File:117.jpg |link=117 |[[Hot-wire foam cutter, handheld, 4.5"×5.5" (Woodland Scenics) ID:117]]
File:118.jpg |link=118 |[[Hot-wire foam cutter, tabletop, 14"×12" ID:118]]
File:127.jpg |link=127 |[[Oil can, blue ID:127]]
File:128.jpg |link=128 |[[Painting tools ID:128]]
File:129.jpg |link=129 |[[Pinball machine (Williams Road Kings) ID:129]]
File:130.jpg |link=130 |[[Sandblasting cabinet, floor, blue (Powerfist) ID:130]]
File:131.jpg |link=131 |[[Screwdriver magnetizer/demagnetizer (Wiha 40010) ID:131]]
File:120.jpg |link=120 |[[Sewing machine, domestic (Singer 1802) ID:120]]
File:132.jpg |link=132 |[[Shop vacuum, orange ID:132]]
File:133.jpg |link=133 |[[Staple gun (Arrow T-18) ID:133]]
File:122.jpg |link=122 |[[Tile work surfaces ID:122]]
File:123.jpg |link=123 |[[Tile work surfaces ID:123]]
File:134.jpg |link=134 |[[Vacuum cart ID:134]]
File:136.jpg |link=136 |[[Vacuum cleaner, portable ID:136]]
File:135.jpg |link=135 |[[Vacuum pump ID:135]]
File:137.jpg |link=137 |[[Vacuum pump (Edwards SpeediVac ED200) ID:137]]
</gallery>

==Removed equipment==

In case they are brought back, or, so people who could have sworn we had a tool know it was removed.

<gallery>

File:3DP_RapMan.jpg |link=3D printer (3D Systems RapMan) |[[3D printer (3D Systems RapMan)]]
File:3D printer, Come3D!.jpg |link=3D printer (Come3D!) |[[3D printer (Come3D!)]]
File:3DP_Cupcake.jpg |link=3D printer (MakerBot Cupcake) |[[3D printer (MakerBot Cupcake)]]
File:1.jpg |link=1 |[[3D printer, FFF (IIIP) ID:1]]
File:3D printer, Nathan Ward's RepRap.jpg |link=3D printer, FFF (RepRap) |[[3D printer, FFF (RepRap)]]
File:3D printer, Yin's Wanhao.jpg |link=3D printer, FFF (Wanhao Duplicator i3) |[[3D printer, FFF (Wanhao Duplicator i3)]]
File:InVision si2.jpg |link=3D printer, MJM (3D Systems InVision si2) |[[3D printer, MJM (3D Systems InVision si2)]]
File:5.jpg |link=5 |[[3D printer, SLA (mUVe 1) ID:5]]
File:Compressor_Dewalt.jpg |link=Air compressor, 4-gallon (DeWalt) |[[Air compressor, 4-gallon (DeWalt)]]
File:Compressor_Big.jpg |link=Air compressor, 17-gallon |[[Air compressor, 17-gallon]]
File:Reciprocating_compressor.jpg |link=Air compressor, 80-gallon (Ingersoll Rand T30) |[[Air compressor, 80-gallon (Ingersoll Rand T30)]]
File:Angle_Grinder.jpg |link=Angle grinder (Kawasaki) |[[Angle grinder (Kawasaki)]]
File:Anvil_75lb.jpg |link=Anvil |[[Anvil]]
File:Bandsaw_Horizontal.jpg |link=Bandsaw, metal, horizontal (Craftex B013N) |[[Bandsaw, metal, horizontal (Craftex B013N)]]
File:Bending_Brake.jpg |link=Bending brake, 30" (Powerfist) |[[Bending brake, 30" (Powerfist)]]
File:114.jpg |link=114 |[[Bicycle tire jig ID:114]]
File:Buffer_Benchtop.jpg |link=Buffer (Clarke 2H 5AB) |[[Buffer (Clarke 2H 5AB)]]
File:Dewars.jpg |link=Dewars, 50-litre |[[Dewars, 50-litre]]
File:Drill_Dewalt.jpg |link=Drill, corded (DeWalt) |[[Drill, corded (DeWalt)]]
File:Pick_N_Place.jpg |link=Electronics assembly pick and place machine (Multitronics 2000LX) |[[Electronics assembly pick and place machine (Multitronics 2000LX)]]
File:Forge_Propane_2.jpg |link=Forge, propane (Jim's) |[[Forge, propane (Jim's)]]
File:43.jpg |link=43 |[[Forge (Travis's) ID:43]]
File:17.jpg |link=17 |[[Function generator (Krohn–Hite 5100A) ID:17]]
File:Impact_Driver.jpg |link=Impact driver (DeWalt) |[[Impact driver (DeWalt)]]
File:7.jpg |link=7 |[[Laser cutter, small ID:7]]
File:Lathe, Torrent T.72-42.jpg |link=Lathe, metal (Torrent T.72-42) |[[Lathe, metal (Torrent T.72-42)]]
File:Lathe_Mill.jpg |link=Lathe–mill combination (Craftex B2229) |[[Lathe–mill combination (Craftex B2229)]]
File:Lathe_Wood_Mini.jpg |link=Lathe, wood (Haussmann) |[[Lathe, wood (Haussmann)]]
File:MaxNC10.jpg |link=Milling machine, CNC, mini (MAXNC 10) |[[Milling machine, CNC, mini (MAXNC 10)]]
File:Audio mixing board.jpg |link=PA system (Dan Damron's) |[[PA system (Dan Damron's)]]
File:50.jpg |link=50 |[[Oxyacetylene torch, large ID:50]]
File:Parts washer, Powerfist 3.5 L.jpg |link=Parts washer, 3.5 L (Powerfist) |[[Parts washer, 3.5 L (Powerfist)]]
File:plasma_cutter.thumbnail.jpg |link=Plasma cutter, CNC (Kyle Paavola's) |[[Plasma cutter, CNC (Kyle Paavola's)]]
File:Router_Plunge_Makita.jpg |link=Router, plunge (Makita 3612BR) |[[Router, plunge (Makita 3612BR)]]
File:10.jpg |link=10 |[[Press (Powerfist) ID:10]]
File:NoImage.png |link=81 |[[Router table, wooden ID:81]]
File:87.jpg |link=87 |[[87|Sander, random orbital (Skil 7492) ID:87]]
File:Chop_Saw.jpg |link=Saw, compound mitre (Ryobi) |[[Saw, compound mitre (Ryobi)]]
File:Chopsaw_Metal.jpg |link=Saw, compound mitre, metal (Ryobi) |[[Saw, compound mitre, metal (Ryobi)]]
File:Reciprocating_Saw.jpg |link=Saw, sabre (Mastercraft) |[[Saw, sabre (Mastercraft)]]
File:Skil_Saw_BD.jpg |link=Saw, handheld circular, 7 1/4" (Black & Decker) |[[Saw, handheld circular, 7 1/4" (Black & Decker)]]
File:Skil_Saw_Red.jpg |link=Saw, handheld circular (Skil) |[[Saw, handheld circular (Skil)]]
File:119.jpg |link=119 |[[Sewing machine, industrial (Relsew) ID:119]]
File:Shaper, metal.jpg |link=Shaper, 7" |[[Shaper, 7"]]
File:Taps_Grey.jpg |link=Tap & die set (Mastercraft) |[[Tap & die set (Mastercraft)]]
File:OxyAce_Mini.jpg |link=Torch, oxygen–acetylene, mini |[[Torch, oxygen–acetylene, mini]]
File:Vice_Medium.jpg |link=Vise, medium (Irwin) |[[Vise, medium (Irwin)]]
File:Welder_MIG.jpg |link=Welder, MIG (Lincoln Weld-Pak 100) |[[Welder, MIG (Lincoln Weld-Pak 100)]]
File:55.jpg |link=55 |[[Welder, stick, orange (Acklands 225 AC Sizzler) ID:55]]
File:109.jpg |link=109 |[[Welder, Stick, AC/DC (Miller Thunderbolt XL) ID:109]]
</gallery>

Protospace Wiki:Wiki-ID system

2019-10-28T04:14:20Z

Cjs: updated next available id

[[:Category:Wiki ID numbers|List of Protospace Wiki ID numbers currently in use]]

To add Wiki ID numbers, use [[Template:id|this template]].

The next available Wiki ID number is [[141]].

140

2019-10-28T04:13:24Z

Cjs: created wiki id redirect

#REDIRECT [[Pocket hole jig (Kreg K3) ID:140]]

This redirect page is part of the Protospace Wiki ID number project. For more information on the project, click [[0|here]].

[[Category:Wiki ID numbers|#]]

Pocket Hole Jig (Kreg K3) ID:140

2019-10-28T04:11:04Z

Cjs: Cjs moved page Pocket Hole Jig (Kreg K3) ID:140 to Pocket hole jig (Kreg K3) ID:140: capitalization

#REDIRECT [[Pocket hole jig (Kreg K3) ID:140]]

Pocket hole jig (Kreg K3) ID:140

2019-10-28T04:10:53Z

Cjs: Cjs moved page Pocket Hole Jig (Kreg K3) ID:140 to Pocket hole jig (Kreg K3) ID:140: capitalization

{{Equipment page
| toolname = Pocket Hole Jig
| model = Kreg K3
| serial =
| owner = Nick Boers
| loanstatus = Semi-Permanent
| arrived = 2019-10
| location = Wood Shop Shelf on East Wall with other plastic carrying cases
| status = Working
| permission = Open to all
| certification = Read the manual
| id = 140
| itemphoto = [[File:140.jpg|350px|thumb|right|]]
}}

Event calendar

2019-10-24T23:02:49Z

Cjs: added electronics course on 2019-11-03

==October 2019==

{{calendar legend}}

{| class="wikitable" style="width:100%;"
! style="min-width:150px; width:14.2857%;" | Sunday
! style="min-width:150px; width:14.2857%;" | Monday
! style="min-width:150px; width:14.2857%;" | Tuesday
! style="min-width:150px; width:14.2857%;" | Wednesday
! style="min-width:150px; width:14.2857%;" | Thursday
! style="min-width:150px; width:14.2857%;" | Friday
! style="min-width:150px; width:14.2857%;" | Saturday
|- style="height:100px; vertical-align:top;"
|
|
| '''1'''
{{event open house|19:00|Meet & Geek}}
| '''2'''
| '''3'''
| '''4'''
{{event training|17:30|[https://my.protospace.ca/school/classdetails/13449 Laser Cutting and Engraving]}}
{{event training|19:30|[https://my.protospace.ca/school/classdetails/13444 New Member Orientation]}}
| '''5'''
{{event training|09:00|[https://my.protospace.ca/school/classdetails/13397 Manual Mill & Advanced Lathe]}}
|- style="height:100px; vertical-align:top;"
| '''6'''
| '''7'''
| '''8'''
{{event open house|19:00|Meet & Geek}}
| '''9'''
{{event training|19:00|[https://my.protospace.ca/school/classdetails/13450 Trotec Course]}}
| '''10'''
| '''11'''
| '''12'''
|- style="height:100px; vertical-align:top;"
| '''13'''
{{event training|14:30|[https://my.protospace.ca/school/classdetails/13445 New Member Orientation]}}
| '''14'''
| '''15'''
{{event open house|19:00|Meet & Geek}}
| '''16'''
{{event meeting|19:03|[https://groups.google.com/forum/#!topic/protospace-administration/otn9b-GwauA Members' Meeting]}}
| '''17'''
{{event training|18:00|[https://my.protospace.ca/school/classdetails/13451 Woodworking 1]}}
{{event training|20:00|[https://my.protospace.ca/school/classdetails/13452 Woodworking 2]}}
| '''18'''
| '''19'''
{{event clean|10:00|Monthly Clean}}
|- style="height:100px; vertical-align:top;"
| '''20'''
| '''21'''
| '''22'''
{{event open house|19:00|Meet & Geek}}
| '''23'''
| '''24'''
| '''25'''
{{event training|19:30|[https://my.protospace.ca/school/classdetails/13453 New Member Orientation]}}
| '''26'''
|- style="height:100px; vertical-align:top;"
| '''27'''
| '''28'''
| '''29'''
{{event open house|19:00|Meet & Geek}}
| '''30'''
| '''31'''
|
|
|}

==November 2019==

{{calendar legend}}

{| class="wikitable" style="width:100%;"
! style="min-width:150px; width:14.2857%;" | Sunday
! style="min-width:150px; width:14.2857%;" | Monday
! style="min-width:150px; width:14.2857%;" | Tuesday
! style="min-width:150px; width:14.2857%;" | Wednesday
! style="min-width:150px; width:14.2857%;" | Thursday
! style="min-width:150px; width:14.2857%;" | Friday
! style="min-width:150px; width:14.2857%;" | Saturday
|- style="height:100px; vertical-align:top;"
|
|
|
|
|
| '''1'''
| '''2'''
{{event member|--:--|[https://groups.google.com/forum/#!topic/protospace-discuss/XZXIiu2USoM Extra Life LAN Party]}}
|- style="height:100px; vertical-align:top;"
| '''3'''
{{event training|09:00|[https://groups.google.com/forum/#!msg/protospace-administration/th_yQqE0Phs/6DcwAhGPCgAJ Intro to Electronics 2]}}
| '''4'''
| '''5'''
{{event open house|19:00|Meet & Geek}}
| '''6'''
| '''7'''
| '''8'''
| '''9'''
|- style="height:100px; vertical-align:top;"
| '''10'''
| '''11'''
| '''12'''
{{event open house|19:00|Meet & Geek}}
| '''13'''
| '''14'''
| '''15'''
| '''16'''
{{event clean|10:00|Monthly Clean}}
|- style="height:100px; vertical-align:top;"
| '''17'''
| '''18'''
| '''19'''
{{event open house|19:00|Meet & Geek}}
| '''20'''
| '''21'''
{{event meeting|19:03|Members' Meeting}}
| '''22'''
| '''23'''
|- style="height:100px; vertical-align:top;"
| '''24'''
| '''25'''
| '''26'''
{{event open house|19:00|Meet & Geek}}
| '''27'''
| '''28'''
| '''29'''
| '''30'''
{{event training|09:00|[https://my.protospace.ca/school/classdetails/13395 Metal Cutting & Manual Lathe]}}
|}

==December 2019==

{{calendar legend}}

{| class="wikitable" style="width:100%;"
! style="min-width:150px; width:14.2857%;" | Sunday
! style="min-width:150px; width:14.2857%;" | Monday
! style="min-width:150px; width:14.2857%;" | Tuesday
! style="min-width:150px; width:14.2857%;" | Wednesday
! style="min-width:150px; width:14.2857%;" | Thursday
! style="min-width:150px; width:14.2857%;" | Friday
! style="min-width:150px; width:14.2857%;" | Saturday
|- style="height:100px; vertical-align:top;"
| '''1'''
| '''2'''
| '''3'''
{{event open house|19:00|Meet & Geek}}
| '''4'''
| '''5'''
| '''6'''
| '''7'''
|- style="height:100px; vertical-align:top;"
| '''8'''
| '''9'''
| '''10'''
{{event open house|19:00|Meet & Geek}}
| '''11'''
| '''12'''
| '''13'''
| '''14'''
{{event training|09:00|[https://my.protospace.ca/school/classdetails/13398 Manual Mill & Advanced Lathe]}}
|- style="height:100px; vertical-align:top;"
| '''15'''
| '''16'''
| '''17'''
{{event open house|19:00|Meet & Geek}}
| '''18'''
{{event meeting|19:03|Members' Meeting}}
| '''19'''
| '''20'''
| '''21'''
{{event clean|10:00|Monthly Clean}}
|- style="height:100px; vertical-align:top;"
| '''22'''
| '''23'''
| '''24'''
| '''25'''
| '''26'''
| '''27'''
| '''28'''
|- style="height:100px; vertical-align:top;"
| '''29'''
| '''30'''
| '''31'''
|
|
|
|
|}

==January 2020==

{{calendar legend}}

{| class="wikitable" style="width:100%;"
! style="min-width:150px; width:14.2857%;" | Sunday
! style="min-width:150px; width:14.2857%;" | Monday
! style="min-width:150px; width:14.2857%;" | Tuesday
! style="min-width:150px; width:14.2857%;" | Wednesday
! style="min-width:150px; width:14.2857%;" | Thursday
! style="min-width:150px; width:14.2857%;" | Friday
! style="min-width:150px; width:14.2857%;" | Saturday
|- style="height:100px; vertical-align:top;"
|
|
|
| '''1'''
| '''2'''
| '''3'''
| '''4'''
|- style="height:100px; vertical-align:top;"
| '''5'''
| '''6'''
| '''7'''
{{event open house|19:00|Meet & Geek}}
| '''8'''
| '''9'''
| '''10'''
| '''11'''
|- style="height:100px; vertical-align:top;"
| '''12'''
| '''13'''
| '''14'''
{{event open house|19:00|Meet & Geek}}
| '''15'''
| '''16'''
{{event meeting|19:03|Members' Meeting}}
| '''17'''
| '''18'''
{{event clean|10:00|Monthly Clean}}
|- style="height:100px; vertical-align:top;"
| '''19'''
| '''20'''
| '''21'''
{{event open house|19:00|Meet & Geek}}
| '''22'''
| '''23'''
| '''24'''
| '''25'''
|- style="height:100px; vertical-align:top;"
| '''26'''
| '''27'''
| '''28'''
{{event open house|19:00|Meet & Geek}}
| '''29'''
| '''30'''
| '''31'''
|
|}

[[Category:Calendar]]

Heat gun (Powerfist) ID:18

2019-10-22T20:42:19Z

Cjs: added link to manufacturer's site

{{Equipment page
| toolname = Heat gun
| model = [https://www.princessauto.com/en/detail/electric-heat-gun/A-p8259210e;jsessionid=biEUwQcRoIjahfmOmwuiAYQB.pal-prod-com1 Powerfist 8259210]
| serial =
| owner = Ben Reed
| loanstatus = Donated to Protospace
| arrived = Before 2013-05-18
| location = East wall cabinets
| status = Working
| permission = Open to All
| certification = None
| id = 18
}}

==Usage notes==

* Used to heat plastic until pliable
* Used to shrink heat-shrink—the [[30|hot-air rework station]] also works for this
* Hot things are hot and take time to cool; don't burn yourself.

==Specs==

* 120 V
* 12.5 A
* 300/600° C (low/high)

==Documentation==

* [https://images11.palcdn.com/hlr-system/Documents/82/825/8259/8259210_manualhb_00_01_v01.pdf Manual]

[[Category:Electronics tools]]
[[Category:Plasticworking tools]]
[[Category:Power tools]]

Heat gun (Powerfist) ID:18

2019-10-22T20:41:28Z

Cjs: minor reformatting, added manual

{{Equipment page
| toolname = Heat gun
| model = Powerfist 8259210
| serial =
| owner = Ben Reed
| loanstatus = Donated to Protospace
| arrived = Before 2013-05-18
| location = East wall cabinets
| status = Working
| permission = Open to All
| certification = None
| id = 18
}}

==Usage notes==

* Used to heat plastic until pliable
* Used to shrink heat-shrink—the [[30|hot-air rework station]] also works for this
* Hot things are hot and take time to cool; don't burn yourself.

==Specs==

* 120 V
* 12.5 A
* 300/600° C (low/high)

==Documentation==

* [https://images11.palcdn.com/hlr-system/Documents/82/825/8259/8259210_manualhb_00_01_v01.pdf Manual]

[[Category:Electronics tools]]
[[Category:Plasticworking tools]]
[[Category:Power tools]]

Function generator (John's) ID:16

2019-10-22T20:28:28Z

Cjs: minor reformatting

{{Equipment page
| toolname = Function generator
| model = Homebuilt
| serial = N/A
| owner = John Warga
| loanstatus = Donation to Protospace
| arrived = Before 2013-05-13
| location = Electronics area
| status = Working
| permission = Open to All
| certification = None
| id = 16
}}

[[Category:Electronics tools]]
[[Category:Electronics test equipment]]

Decade box, capacitance (Servomex Controls Decade Capacitor Type B) ID:15

2019-10-22T20:23:37Z

Cjs: added various information

{{Equipment page
| toolname = Capacitance decade box
| model = Servomex Controls Decade Capacitor Type B
| serial =
| owner =
| loanstatus =
| arrived = Before 2014-10-29
| location = Electronics area
| status = Working
| permission =
| certification =
| id = 15
}}

Counter (Lafayette 54517) ID:14

2019-10-22T20:14:15Z

Cjs: minor reformatting

{{Equipment page
| toolname = Digital counter
| model = Lafayette 54517
| serial =
| owner =
| loanstatus = Semi-permanent loan
| arrived = Before 2013-05-13
| location = Electronics room
| status = Working
| permission = Open to All
| certification = None
| id = 14
}}

[[Category:Electronics tools]]
[[Category:Electronics test equipment]]

Counter (Fluke 1910A Multi-Counter) ID:13

2019-10-22T20:02:42Z

Cjs: added various information and link to manual

{{Equipment page
| toolname = Frequency counter
| model = Fluke 1910A Multi-Counter
| serial = 3170048
| owner =
| loanstatus =
| arrived = Before 2014-10-29
| location = Electronics room
| status = Working
| permission =
| certification =
| id = 13
}}

==Documentation==

* [http://w140.com/fluke_1910a_1911a.pdf Manual]

Router table, wooden ID:81

2019-10-21T08:08:13Z

Cjs: fix link to replacement tool

{{Equipment page removed
| toolname = Wooden router table
| model = ??
| serial = ??
| owner = Ninja Steve
| loanstatus = Donation to Protospace
| arrived = Jan/Feb 2016
| removaldate = late 2016 (?)
| removedby = woodworkers (?)
| removalreason = Jeff built a better one
| replacements = [[Router table (Jeff's) ID:124]]
| location = Wood shop
| status = Works, but has no switch!
| permission = Open to full members
| certification = Certification required: Wood shop introduction
| id = 81
| itemphoto = [[File:NoImage.png|350px|thumb|right|]]
}}

{{Warning|This router table has no switch. It will start running as soon as you plug it in!}}

[[Category:Woodworking tools]]
[[Category:Machine tools]]

Oxygen concentrator (OGSI OG-15) ID:12

2019-10-21T07:56:28Z

Cjs: updated link to manual

{{Equipment page
| toolname = Oxygen concentrator
| model = [http://www.ogsi.com/index.php?src=directory&view=Products&srctype=detail&refno=40&category=products OGSI OG-15]
| serial =
| owner = Ryan Turner
| loanstatus = Donated to Protospace
| arrived = 2013-05-10
| location = Useful Room
| status = Working
| permission = Open to Members
| certification = Demo/Notes Required
| id = 12
}}

==Usage notes==

* Removes mostly nitrogen from normal air, leaving 93% pure oxygen.
* Useable for small torches (oxygen on demand, no bottles)
* Useable for aquaponics projects (can increase fish density)
* Check and clean inlet air filter every 6 months (probably far more often at Protospace); note this before use. [http://www.youtube.com/watch?v=x2qf8c_bX7o Instruction Video Showing How]

==Specs==

* 120V
* 0.3hp compressor
* 700W max
* 12 psi
* 15 standard cubic feet per hour (0.25 SCFM)
* 24 hour/day operation
* Less than 500 hours on unit when arrived.

==Documentation==

* [http://www.ogsi.com/clientuploads/Product%20Mannuals/OG-15%20and%20OG-20%20Combined%20Manual%20REV%20C.pdf Manual]

==Upgrade notes==

* Would be much more useful if could be used to refill oxygen bottle from the large oxy/ace torches. A second compressor is needed.

[[Category:Chemistry tools]]

Bench grinder (Trademaster PR14210) ID:40

2019-10-21T07:36:25Z

Cjs: added various information

{{Equipment page
| toolname = Bench grinder
| model = Trademaster PR14210
| serial = 0003714
| owner =
| loanstatus =
| arrived = Before 2014-10-30
| location =
| status = Working
| permission =
| certification =
| id = 40
}}

Angle grinder (DeWalt) ID:35

2019-10-21T06:55:21Z

Cjs: added various information

{{Equipment page
| toolname = Angle grinder
| model = DeWalt
| serial =
| owner =
| loanstatus =
| arrived = Before 2014-10-30
| location =
| status = Working
| permission =
| certification =
| id = 35
}}

Sander, drum (General International 15-250 M1) ID:106

2019-10-21T06:24:44Z

Cjs: added link to manufacturer's website and updated manual link

{{Equipment page
| toolname = Drum sander
| model = [https://general.ca/catalog/3-hp-25-horizontal-double-drum-sander/ General International 15-250 M1]
| serial = 382107
| owner =
| loanstatus =
| arrived = Before 2017-03-31
| location = Woodworking shop
| status = Working
| permission =
| certification = Basic woodworking safety course
| id = 106
}}

==Usage notes==

* Requires training
* Please take gentle light passes
* Refer to page 16-17 on the manual for sanding belts

==Specs==

* 220V@15A, 3HP, 1Ph
* Maximum sanding width: 24” (610 mm)
* Maximum sanding thickness: 5” (127 mm)
* Minimum sanding thickness: 1/4” (6 mm)
* Minimum sanding length: 5” (127 mm)
* Drum diameter: 5” (127 mm)
* Drum speed: 1550 RPM
* Feeding speed (variable): 3 TO 20 FPM (0.93 to 6.2 M/MIN) (VARIABLE)

==Documentation==

* [https://general.ca/wp-content/uploads/2018/08/15-250_ENG.pdf Manual]

Tools we have

2019-10-21T06:13:07Z

Cjs: removed "removed tools" that did not already have pages

'''Adding a new tool to the wiki?''' Follow this [[Adding New Tools Procedure|procedure]].

We can always use new tools! Please feel free to [[List of links and email addresses|contact Protospace]] to donate, arrange for pickup, or drop them off in person.

If you are interested in knowing what kind of tools we are looking for, we also have a member-managed [[Tools we want|tool wishlist]], but your best bet on figuring out if we want something is simply asking on our [https://groups.google.com/forum/#!forum/protospace-discuss discussion group].

We also have [[:Category:Tools|an alphabetically ordered and categorized tool catalog]].

{{Warning|Treat the tools at Protospace with respect! Clean, functioning tools make for a happy crowd.}}

==Rapid prototyping tools==

: ''Comparisons: [[our 3D printers]], [[our laser cutters]]''

<gallery>

File:2.jpg |link=2 |[[3D printer, FFF (ORD Bot Hadron) ID:2]]
File:125.jpg |link=125 |[[3D printer, FFF (ORD Bot Hadron) ID:125]]
File:126.jpg |link=126 |[[3D printer, FFF (ORD Bot Hadron) ID:126]]
File:3.jpg |link=3 |[[3D printer, FFF (PrusaMD) ID:3]]
File:4.jpg |link=4 |[[3D printer, FFF, delta (Kossel) ID:4]]
File:6.jpg |link=6 |[[Laser cutter, large (Rabbit Laser RL-80-1290) ID:6]]
File:107.jpg |link=107 |[[Laser cutter (Trotec Speedy 300) ID:107]]
</gallery>

==Automotive tools==

<gallery>

File:8.jpg |link=8 |[[Floor jack, blue ID:8]]
File:9.jpg |link=9 |[[Trolley jack and axle stand kit (Certified) ID:9]]
File:11.jpg |link=11 |[[Socket set ID:11]]
</gallery>

==Chemistry==

<gallery>

File:12.jpg |link=12 |[[Oxygen concentrator (OGSI OG-15) ID:12]]
</gallery>

==Electronics tools==

<gallery>

File:13.jpg |link=13 |[[Counter (Fluke 1910A Multi-Counter) ID:13]]
File:14.jpg |link=14 |[[Counter (Lafayette 54517) ID:14]]
File:15.jpg |link=15 |[[Decade box, capacitance (Servomex Controls Decade Capacitor Type B) ID:15]]
File:16.jpg |link=16 |[[Function generator (John's) ID:16]]
File:18.jpg |link=18 |[[Heat gun (Powerfist) ID:18]]
File:19.jpg |link=19 |[[Logic analyzer (HP 1631D) ID:19]]
File:20.jpg |link=20 |[[Multimeter, digital (Pro.Point 8344665) ID:20]]
File:21.jpg |link=21 |[[Oscilloscope (Brunelle 2925) ID:21]]
File:22.jpg |link=22 |[[Oscilloscope (Kikusui COS 5060) ID:22]]
File:23.jpg |link=23 |[[Oscilloscope (Tektronix 2225) ID:23]]
File:24.jpg |link=24 |[[Oscilloscope (Tektronix 2465A) ID:24]]
File:25.jpg |link=25 |[[Oscilloscope, PC (Syscomp DSO-101) ID:25]]
File:26.jpg |link=26 |[[Power supply, bench (GQ Electronics GQ-A305D) ID:26]]
File:27.jpg |link=27 |[[Power supply, bench, 500 V (Heathkit PS-3) ID:27]]
File:28.jpg |link=28 |[[Power supply, bench, 2-channel (TENMA 72-7245) ID:28]]
File:29.jpg |link=29 |[[Reflow oven (Hamilton Beach) ID:29]]
File:30.jpg |link=30 |[[Hot-air rework station (GQ Electronics 5200) ID:30]]
File:31.jpg |link=31 |[[Solder fume extractor (Metcal) ID:31]]
File:32.jpg |link=32 |[[UV photomasker (Dan's) ID:32]]
File:33.jpg |link=33 |[[Waveform generator (Syscomp WGM-101) ID:33]]
File:34.jpg |link=34 |[[Waveform monitor (Tektronix 1730) ID:34]]
</gallery>

==Metalworking tools==

<gallery>

File:35.jpg |link=35 |[[Angle grinder (DeWalt) ID:35]]
File:36.jpg |link=36 |[[Anvil (Chris's) ID:36]]
File:37.jpg |link=37 |[[Bandsaw, metal, horizontal ID:37]]
File:38.jpg |link=38 |[[Bench grinder (Baldor) ID:38]]
File:39.jpg |link=39 |[[Bench grinder (Powerfist) ID:39]]
File:40.jpg |link=40 |[[Bench grinder (Trademaster PR14210) ID:40]]
File:41.jpg |link=41 |[[Brake, box and pan, 24" (Magnum) ID:41]]
File:42.jpg |link=42 |[[Drill press (Mastercraft) ID:42]]
File:44.jpg |link=44 |[[Forge, propane, pass-through ID:44]]
File:45.jpg |link=45 |[[Foundry, propane ID:45]]
File:121.jpg |link=121 |[[Hydraulic press, 50-ton, electric ID:121]]
File:46.jpg |link=46 |[[Lathe, metal (Challenger 1660G) ID:46]]
File:47.jpg |link=47 |[[Lathe, miniature (Taig Microlathe II) ID:47]]
File:53.jpg |link=53 |[[Metal shear (Magnum) ID:53]]
File:48.jpg |link=48 |[[Milling machine (ACRA AM4V) ID:48]]
File:49.jpg |link=49 |[[Milling machine, CNC (Tormach PCNC 1100) ID:49]]
File:51.jpg |link=51 |[[Plasma cutter, huge (Powercut 1500) ID:51]]
File:52.jpg |link=52 |[[Plasma cutter, small (Miller Spectrum 375) ID:52]]
File:54.jpg |link=54 |[[Vise, giant ID:54]]
File:56.jpg |link=56 |[[Welding magnets ID:56]]
File:96.jpg |link=96 |[[Spot welder ID:96]]
</gallery>

==Woodworking and plasticworking tools==

<gallery>

File:57.jpg |link=57 |[[Bandsaw, green ID:57]]
File:105.jpg |link=105 |[[Bandsaw (Shop Fox W1706) ID:105]]
File:58.jpg |link=58 |[[Belt and disc sander (CWD 15-315) ID:58]]
File:59.jpg |link=59 |[[Clamps ID:59]]
File:60.jpg |link=60 |[[Drill, hand, corded (Black & Decker) ID:60]]
File:61.jpg |link=61 |[[Drill, hand, corded, black (Jobmate) ID:61]]
File:62.jpg |link=62 |[[Drill, hand, corded, dark blue (Ryobi) ID:62]]
File:63.jpg |link=63 |[[Drill, hand, cordless (Black & Decker) ID:63]]
File:64.jpg |link=64 |[[Drill, hand, cordless (Black & Decker FireStorm) ID:64]]
File:65.jpg |link=65 |[[Drill, hand, cordless, with detachable chuck (Black & Decker FireStorm) ID:65]]
File:66.jpg |link=66 |[[Drill, hand, cordless, with quick connector (Black & Decker FireStorm) ID:66]]
File:67.jpg |link=67 |[[Drill, hand, cordless (DeWalt) ID:67]]
File:68.jpg |link=68 |[[Drill, hand, corded (Makita DP3720) ID:68]]
File:69.jpg |link=69 |[[Drill press, 8" (Jobmate) ID:69]]
File:70.jpg |link=70 |[[Jigsaw, corded (Black & Decker) ID:70]]
File:71.jpg |link=71 |[[Jigsaw, cordless (Black & Decker FireStorm) ID:71]]
File:72.jpg |link=72 |[[Jigsaw (Skil) ID:72]]
File:73.jpg |link=73 |[[Jointer, grey ID:73]]
File:74.jpg |link=74 |[[Miter saw, compound, sliding (Hitachi) ID:74]]
File:75.jpg |link=75 |[[Nailer, pneumatic, 2-in-1 ID:75]]
File:108.jpg |link=108 |[[Planer (Jet JPM-13CS) ID:108]]
File:76.jpg |link=76 |[[Plate joiner (Porter Cable 557) ID:76]]
File:77.jpg |link=77 |[[Radial arm saw (Craftsman) ID:77]]
File:78.jpg |link=78 |[[Rotary tool, corded (Mastercraft) ID:78]]
File:79.jpg |link=79 |[[Rotary tool, cordless (Dremel) ID:79]]
File:80.jpg |link=80 |[[Router table (Craftsman) ID:80]]
File:124.jpg |link=124 |[[Router table (Jeff's) ID:124]]
File:82.jpg |link=82 |[[Sabre saw (Black & Decker FireStorm) ID:82]]
File:83.jpg |link=83 |[[Sander, belt (Makita 9402) ID:83]]
File:84.jpg |link=84 |[[Sander, belt/disc (Dremel 730) ID:84]]
File:85.jpg |link=85 |[[Sander, detail (Ryobi) ID:85]]
File:106.jpg |link=106 |[[Sander, drum (General International 15-250 M1) ID:106]]
File:86.jpg |link=86 |[[Sander, hand, cordless (Black & Decker FireStorm) ID:86]]
File:138.jpg |link=138 |[[138|Sander, random orbital (Ridgid R2601) ID:138]]
File:139.jpg |link=139 |[[139|Sander, random orbital (Ridgid R2601) ID:139]]
File:88.jpg |link=88 |[[Sander, straight-line/orbital (Black & Decker Deluxe) ID:88]]
File:89.jpg |link=89 |[[Scroll saw (Dremel) ID:89]]
File:90.jpg |link=90 |[[Scroll saw (Mastercraft 55-6714-6) ID:90]]
File:91.jpg |link=91 |[[Table saw (Craftex CX201) ID:91]]
File:92.jpg |link=92 |[[Thickness planer (Ryobi AP1301) ID:92]]
File:93.jpg |link=93 |[[Vacuum, sawdust (Craftex CX404) ID:93]]
File:94.jpg |link=94 |[[Vise, wood ID:94]]
File:95.jpg |link=95 |[[Vise, wood (Travis's) ID:95]]
</gallery>

==Measuring and inspection tools==

See also the [[#Electronics Tools|Electronics Tools section on this page]] for electrical and electronic measurement and test equipment.

<gallery>

File:97.jpg |link=97 |[[Inspection mirror, 18" gooseneck ID:97]]
File:98.jpg |link=98 |[[Magnifier lamp, large, with lid ID:98]]
File:99.jpg |link=99 |[[Magnifier lamp, large, without lid ID:99]]
File:100.jpg |link=100 |[[Magnifier lamp, small, with lid ID:100]]
File:101.jpg |link=101 |[[Measuring tapes ID:101]]
File:102.jpg |link=102 |[[Rulers ID:102]]
File:103.jpg |link=103 |[[Squares ID:103]]
File:104.jpg |link=104 |[[Thermometer, infrared (H64) ID:104]]
</gallery>

==Miscellaneous tools==

<gallery>

File:110.jpg |link=110 |[[Air compressor, 60-gallon (Campbell Hausfeld) ID:110]]
File:111.jpg |link=111 |[[Air compressor, 80-gallon (MAXair Premium) ID:111]]
File:112.jpg |link=112 |[[Air compressor, silent ID:112]]
File:113.jpg |link=113 |[[Air pump, foot-operated (Bell FootPumper) ID:113]]
File:115.jpg |link=115 |[[Engraver ID:115]]
File:116.jpg |link=116 |[[Hand truck, red ID:116]]
File:117.jpg |link=117 |[[Hot-wire foam cutter, handheld, 4.5"×5.5" (Woodland Scenics) ID:117]]
File:118.jpg |link=118 |[[Hot-wire foam cutter, tabletop, 14"×12" ID:118]]
File:127.jpg |link=127 |[[Oil can, blue ID:127]]
File:128.jpg |link=128 |[[Painting tools ID:128]]
File:129.jpg |link=129 |[[Pinball machine (Williams Road Kings) ID:129]]
File:130.jpg |link=130 |[[Sandblasting cabinet, floor, blue (Powerfist) ID:130]]
File:131.jpg |link=131 |[[Screwdriver magnetizer/demagnetizer (Wiha 40010) ID:131]]
File:120.jpg |link=120 |[[Sewing machine, domestic (Singer 1802) ID:120]]
File:132.jpg |link=132 |[[Shop vacuum, orange ID:132]]
File:133.jpg |link=133 |[[Staple gun (Arrow T-18) ID:133]]
File:122.jpg |link=122 |[[Tile work surfaces ID:122]]
File:123.jpg |link=123 |[[Tile work surfaces ID:123]]
File:134.jpg |link=134 |[[Vacuum cart ID:134]]
File:136.jpg |link=136 |[[Vacuum cleaner, portable ID:136]]
File:135.jpg |link=135 |[[Vacuum pump ID:135]]
File:137.jpg |link=137 |[[Vacuum pump (Edwards SpeediVac ED200) ID:137]]
</gallery>

==Removed equipment==

In case they are brought back, or, so people who could have sworn we had a tool know it was removed.

<gallery>

File:3DP_RapMan.jpg |link=3D printer (3D Systems RapMan) |[[3D printer (3D Systems RapMan)]]
File:3D printer, Come3D!.jpg |link=3D printer (Come3D!) |[[3D printer (Come3D!)]]
File:3DP_Cupcake.jpg |link=3D printer (MakerBot Cupcake) |[[3D printer (MakerBot Cupcake)]]
File:1.jpg |link=1 |[[3D printer, FFF (IIIP) ID:1]]
File:3D printer, Nathan Ward's RepRap.jpg |link=3D printer, FFF (RepRap) |[[3D printer, FFF (RepRap)]]
File:3D printer, Yin's Wanhao.jpg |link=3D printer, FFF (Wanhao Duplicator i3) |[[3D printer, FFF (Wanhao Duplicator i3)]]
File:InVision si2.jpg |link=3D printer, MJM (3D Systems InVision si2) |[[3D printer, MJM (3D Systems InVision si2)]]
File:5.jpg |link=5 |[[3D printer, SLA (mUVe 1) ID:5]]
File:Compressor_Dewalt.jpg |link=Air compressor, 4-gallon (DeWalt) |[[Air compressor, 4-gallon (DeWalt)]]
File:Compressor_Big.jpg |link=Air compressor, 17-gallon |[[Air compressor, 17-gallon]]
File:Reciprocating_compressor.jpg |link=Air compressor, 80-gallon (Ingersoll Rand T30) |[[Air compressor, 80-gallon (Ingersoll Rand T30)]]
File:Angle_Grinder.jpg |link=Angle grinder (Kawasaki) |[[Angle grinder (Kawasaki)]]
File:Anvil_75lb.jpg |link=Anvil |[[Anvil]]
File:Bandsaw_Horizontal.jpg |link=Bandsaw, metal, horizontal (Craftex B013N) |[[Bandsaw, metal, horizontal (Craftex B013N)]]
File:Bending_Brake.jpg |link=Bending brake, 30" (Powerfist) |[[Bending brake, 30" (Powerfist)]]
File:114.jpg |link=114 |[[Bicycle tire jig ID:114]]
File:Buffer_Benchtop.jpg |link=Buffer (Clarke 2H 5AB) |[[Buffer (Clarke 2H 5AB)]]
File:Dewars.jpg |link=Dewars, 50-litre |[[Dewars, 50-litre]]
File:Drill_Dewalt.jpg |link=Drill, corded (DeWalt) |[[Drill, corded (DeWalt)]]
File:Pick_N_Place.jpg |link=Electronics assembly pick and place machine (Multitronics 2000LX) |[[Electronics assembly pick and place machine (Multitronics 2000LX)]]
File:Forge_Propane_2.jpg |link=Forge, propane (Jim's) |[[Forge, propane (Jim's)]]
File:43.jpg |link=43 |[[Forge (Travis's) ID:43]]
File:17.jpg |link=17 |[[Function generator (Krohn–Hite 5100A) ID:17]]
File:Impact_Driver.jpg |link=Impact driver (DeWalt) |[[Impact driver (DeWalt)]]
File:7.jpg |link=7 |[[Laser cutter, small ID:7]]
File:Lathe, Torrent T.72-42.jpg |link=Lathe, metal (Torrent T.72-42) |[[Lathe, metal (Torrent T.72-42)]]
File:Lathe_Mill.jpg |link=Lathe–mill combination (Craftex B2229) |[[Lathe–mill combination (Craftex B2229)]]
File:Lathe_Wood_Mini.jpg |link=Lathe, wood (Haussmann) |[[Lathe, wood (Haussmann)]]
File:MaxNC10.jpg |link=Milling machine, CNC, mini (MAXNC 10) |[[Milling machine, CNC, mini (MAXNC 10)]]
File:Audio mixing board.jpg |link=PA system (Dan Damron's) |[[PA system (Dan Damron's)]]
File:50.jpg |link=50 |[[Oxyacetylene torch, large ID:50]]
File:Parts washer, Powerfist 3.5 L.jpg |link=Parts washer, 3.5 L (Powerfist) |[[Parts washer, 3.5 L (Powerfist)]]
File:plasma_cutter.thumbnail.jpg |link=Plasma cutter, CNC (Kyle Paavola's) |[[Plasma cutter, CNC (Kyle Paavola's)]]
File:Router_Plunge_Makita.jpg |link=Router, plunge (Makita 3612BR) |[[Router, plunge (Makita 3612BR)]]
File:10.jpg |link=10 |[[Press (Powerfist) ID:10]]
File:NoImage.png |link=81 |[[Router table, wooden ID:81]]
File:87.jpg |link=87 |[[87|Sander, random orbital (Skil 7492) ID:87]]
File:Chop_Saw.jpg |link=Saw, compound mitre (Ryobi) |[[Saw, compound mitre (Ryobi)]]
File:Chopsaw_Metal.jpg |link=Saw, compound mitre, metal (Ryobi) |[[Saw, compound mitre, metal (Ryobi)]]
File:Reciprocating_Saw.jpg |link=Saw, sabre (Mastercraft) |[[Saw, sabre (Mastercraft)]]
File:Skil_Saw_BD.jpg |link=Saw, handheld circular, 7 1/4" (Black & Decker) |[[Saw, handheld circular, 7 1/4" (Black & Decker)]]
File:Skil_Saw_Red.jpg |link=Saw, handheld circular (Skil) |[[Saw, handheld circular (Skil)]]
File:119.jpg |link=119 |[[Sewing machine, industrial (Relsew) ID:119]]
File:Shaper, metal.jpg |link=Shaper, 7" |[[Shaper, 7"]]
File:Taps_Grey.jpg |link=Tap & die set (Mastercraft) |[[Tap & die set (Mastercraft)]]
File:OxyAce_Mini.jpg |link=Torch, oxygen–acetylene, mini |[[Torch, oxygen–acetylene, mini]]
File:Vice_Medium.jpg |link=Vise, medium (Irwin) |[[Vise, medium (Irwin)]]
File:Welder_MIG.jpg |link=Welder, MIG (Lincoln Weld-Pak 100) |[[Welder, MIG (Lincoln Weld-Pak 100)]]
File:55.jpg |link=55 |[[Welder, stick, orange (Acklands 225 AC Sizzler) ID:55]]
File:109.jpg |link=109 |[[Welder, Stick, AC/DC (Miller Thunderbolt XL) ID:109]]
</gallery>

Protospace Wiki:Wiki-ID system

2019-10-21T05:52:12Z

Cjs: updated next available id

[[:Category:Wiki ID numbers|List of Protospace Wiki ID numbers currently in use]]

To add Wiki ID numbers, use [[Template:id|this template]].

The next available Wiki ID number is [[140]].

Tools we have

2019-10-21T05:46:54Z

Cjs: added more descriptive names for some tools

'''Adding a new tool to the wiki?''' Follow this [[Adding New Tools Procedure|procedure]].

We can always use new tools! Please feel free to [[List of links and email addresses|contact Protospace]] to donate, arrange for pickup, or drop them off in person.

If you are interested in knowing what kind of tools we are looking for, we also have a member-managed [[Tools we want|tool wishlist]], but your best bet on figuring out if we want something is simply asking on our [https://groups.google.com/forum/#!forum/protospace-discuss discussion group].

We also have [[:Category:Tools|an alphabetically ordered and categorized tool catalog]].

{{Warning|Treat the tools at Protospace with respect! Clean, functioning tools make for a happy crowd.}}

==Rapid prototyping tools==
:''Comparisons: [[our 3D printers]], [[our laser cutters]]''
<gallery>

File:2.jpg |link=2 |[[3D printer, FFF (ORD Bot Hadron) ID:2]]
File:125.jpg |link=125 |[[3D printer, FFF (ORD Bot Hadron) ID:125]]
File:126.jpg |link=126 |[[3D printer, FFF (ORD Bot Hadron) ID:126]]
File:3.jpg |link=3 |[[3D printer, FFF (PrusaMD) ID:3]]
File:4.jpg |link=4 |[[3D printer, FFF, delta (Kossel) ID:4]]
File:6.jpg |link=6 |[[Laser cutter, large (Rabbit Laser RL-80-1290) ID:6]]
File:107.jpg |link=107 |[[Laser cutter (Trotec Speedy 300) ID:107]]
</gallery>

==Automotive tools==

<gallery>

File:8.jpg |link=8 |[[Floor jack, blue ID:8]]
File:9.jpg |link=9 |[[Trolley jack and axle stand kit (Certified) ID:9]]
File:11.jpg |link=11 |[[Socket set ID:11]]
</gallery>

==Chemistry==

<gallery>

File:12.jpg |link=12 |[[Oxygen concentrator (OGSI OG-15) ID:12]]
</gallery>

==Electronics tools==

<gallery>

File:13.jpg |link=13 |[[Counter (Fluke 1910A Multi-Counter) ID:13]]
File:14.jpg |link=14 |[[Counter (Lafayette 54517) ID:14]]
File:15.jpg |link=15 |[[Decade box, capacitance (Servomex Controls Decade Capacitor Type B) ID:15]]
File:16.jpg |link=16 |[[Function generator (John's) ID:16]]
File:18.jpg |link=18 |[[Heat gun (Powerfist) ID:18]]
File:19.jpg |link=19 |[[Logic analyzer (HP 1631D) ID:19]]
File:20.jpg |link=20 |[[Multimeter, digital (Pro.Point 8344665) ID:20]]
File:21.jpg |link=21 |[[Oscilloscope (Brunelle 2925) ID:21]]
File:22.jpg |link=22 |[[Oscilloscope (Kikusui COS 5060) ID:22]]
File:23.jpg |link=23 |[[Oscilloscope (Tektronix 2225) ID:23]]
File:24.jpg |link=24 |[[Oscilloscope (Tektronix 2465A) ID:24]]
File:25.jpg |link=25 |[[Oscilloscope, PC (Syscomp DSO-101) ID:25]]
File:26.jpg |link=26 |[[Power supply, bench (GQ Electronics GQ-A305D) ID:26]]
File:27.jpg |link=27 |[[Power supply, bench, 500 V (Heathkit PS-3) ID:27]]
File:28.jpg |link=28 |[[Power supply, bench, 2-channel (TENMA 72-7245) ID:28]]
File:29.jpg |link=29 |[[Reflow oven (Hamilton Beach) ID:29]]
File:30.jpg |link=30 |[[Hot-air rework station (GQ Electronics 5200) ID:30]]
File:31.jpg |link=31 |[[Solder fume extractor (Metcal) ID:31]]
File:32.jpg |link=32 |[[UV photomasker (Dan's) ID:32]]
File:33.jpg |link=33 |[[Waveform generator (Syscomp WGM-101) ID:33]]
File:34.jpg |link=34 |[[Waveform monitor (Tektronix 1730) ID:34]]
</gallery>

==Metalworking tools==

<gallery>

File:35.jpg |link=35 |[[Angle grinder (DeWalt) ID:35]]
File:36.jpg |link=36 |[[Anvil (Chris's) ID:36]]
File:37.jpg |link=37 |[[Bandsaw, metal, horizontal ID:37]]
File:38.jpg |link=38 |[[Bench grinder (Baldor) ID:38]]
File:39.jpg |link=39 |[[Bench grinder (Powerfist) ID:39]]
File:40.jpg |link=40 |[[Bench grinder (Trademaster PR14210) ID:40]]
File:41.jpg |link=41 |[[Brake, box and pan, 24" (Magnum) ID:41]]
File:42.jpg |link=42 |[[Drill press (Mastercraft) ID:42]]
File:44.jpg |link=44 |[[Forge, propane, pass-through ID:44]]
File:45.jpg |link=45 |[[Foundry, propane ID:45]]
File:121.jpg |link=121 |[[Hydraulic press, 50-ton, electric ID:121]]
File:46.jpg |link=46 |[[Lathe, metal (Challenger 1660G) ID:46]]
File:47.jpg |link=47 |[[Lathe, miniature (Taig Microlathe II) ID:47]]
File:53.jpg |link=53 |[[Metal shear (Magnum) ID:53]]
File:48.jpg |link=48 |[[Milling machine (ACRA AM4V) ID:48]]
File:49.jpg |link=49 |[[Milling machine, CNC (Tormach PCNC 1100) ID:49]]
File:51.jpg |link=51 |[[Plasma cutter, huge (Powercut 1500) ID:51]]
File:52.jpg |link=52 |[[Plasma cutter, small (Miller Spectrum 375) ID:52]]
File:54.jpg |link=54 |[[Vise, giant ID:54]]
File:56.jpg |link=56 |[[Welding magnets ID:56]]
File:96.jpg |link=96 |[[Spot welder ID:96]]
</gallery>

==Woodworking and plasticworking tools==

<gallery>

File:57.jpg |link=57 |[[Bandsaw, green ID:57]]
File:105.jpg |link=105 |[[Bandsaw (Shop Fox W1706) ID:105]]
File:58.jpg |link=58 |[[Belt and disc sander (CWD 15-315) ID:58]]
File:59.jpg |link=59 |[[Clamps ID:59]]
File:60.jpg |link=60 |[[Drill, hand, corded (Black & Decker) ID:60]]
File:61.jpg |link=61 |[[Drill, hand, corded, black (Jobmate) ID:61]]
File:62.jpg |link=62 |[[Drill, hand, corded, dark blue (Ryobi) ID:62]]
File:63.jpg |link=63 |[[Drill, hand, cordless (Black & Decker) ID:63]]
File:64.jpg |link=64 |[[Drill, hand, cordless (Black & Decker FireStorm) ID:64]]
File:65.jpg |link=65 |[[Drill, hand, cordless, with detachable chuck (Black & Decker FireStorm) ID:65]]
File:66.jpg |link=66 |[[Drill, hand, cordless, with quick connector (Black & Decker FireStorm) ID:66]]
File:67.jpg |link=67 |[[Drill, hand, cordless (DeWalt) ID:67]]
File:68.jpg |link=68 |[[Drill, hand, corded (Makita DP3720) ID:68]]
File:69.jpg |link=69 |[[Drill press, 8" (Jobmate) ID:69]]
File:70.jpg |link=70 |[[Jigsaw, corded (Black & Decker) ID:70]]
File:71.jpg |link=71 |[[Jigsaw, cordless (Black & Decker FireStorm) ID:71]]
File:72.jpg |link=72 |[[Jigsaw (Skil) ID:72]]
File:73.jpg |link=73 |[[Jointer, grey ID:73]]
File:74.jpg |link=74 |[[Miter saw, compound, sliding (Hitachi) ID:74]]
File:75.jpg |link=75 |[[Nailer, pneumatic, 2-in-1 ID:75]]
File:108.jpg |link=108 |[[Planer (Jet JPM-13CS) ID:108]]
File:76.jpg |link=76 |[[Plate joiner (Porter Cable 557) ID:76]]
File:77.jpg |link=77 |[[Radial arm saw (Craftsman) ID:77]]
File:78.jpg |link=78 |[[Rotary tool, corded (Mastercraft) ID:78]]
File:79.jpg |link=79 |[[Rotary tool, cordless (Dremel) ID:79]]
File:80.jpg |link=80 |[[Router table (Craftsman) ID:80]]
File:124.jpg |link=124 |[[Router table (Jeff's) ID:124]]
File:82.jpg |link=82 |[[Sabre saw (Black & Decker FireStorm) ID:82]]
File:83.jpg |link=83 |[[Sander, belt (Makita 9402) ID:83]]
File:84.jpg |link=84 |[[Sander, belt/disc (Dremel 730) ID:84]]
File:85.jpg |link=85 |[[Sander, detail (Ryobi) ID:85]]
File:106.jpg |link=106 |[[Sander, drum (General International 15-250 M1) ID:106]]
File:86.jpg |link=86 |[[Sander, hand, cordless (Black & Decker FireStorm) ID:86]]
File:138.jpg |link=138 |[[138|Sander, random orbital (Ridgid R2601) ID:138]]
File:139.jpg |link=139 |[[139|Sander, random orbital (Ridgid R2601) ID:139]]
File:88.jpg |link=88 |[[Sander, straight-line/orbital (Black & Decker Deluxe) ID:88]]
File:89.jpg |link=89 |[[Scroll saw (Dremel) ID:89]]
File:90.jpg |link=90 |[[Scroll saw (Mastercraft 55-6714-6) ID:90]]
File:91.jpg |link=91 |[[Table saw (Craftex CX201) ID:91]]
File:92.jpg |link=92 |[[Thickness planer (Ryobi AP1301) ID:92]]
File:93.jpg |link=93 |[[Vacuum, sawdust (Craftex CX404) ID:93]]
File:94.jpg |link=94 |[[Vise, wood ID:94]]
File:95.jpg |link=95 |[[Vise, wood (Travis's) ID:95]]
</gallery>

==Measuring and inspection tools==
See also the [[#Electronics Tools|Electronics Tools section on this page]] for electrical and electronic measurement and test equipment.
<gallery>

File:97.jpg |link=97 |[[Inspection mirror, 18" gooseneck ID:97]]
File:98.jpg |link=98 |[[Magnifier lamp, large, with lid ID:98]]
File:99.jpg |link=99 |[[Magnifier lamp, large, without lid ID:99]]
File:100.jpg |link=100 |[[Magnifier lamp, small, with lid ID:100]]
File:101.jpg |link=101 |[[Measuring tapes ID:101]]
File:102.jpg |link=102 |[[Rulers ID:102]]
File:103.jpg |link=103 |[[Squares ID:103]]
File:104.jpg |link=104 |[[Thermometer, infrared (H64) ID:104]]
</gallery>

==Miscellaneous tools==

<gallery>

File:110.jpg |link=110 |[[Air compressor, 60-gallon (Campbell Hausfeld) ID:110]]
File:111.jpg |link=111 |[[Air compressor, 80-gallon (MAXair Premium) ID:111]]
File:112.jpg |link=112 |[[Air compressor, silent ID:112]]
File:113.jpg |link=113 |[[Air pump, foot-operated (Bell FootPumper) ID:113]]
File:115.jpg |link=115 |[[Engraver ID:115]]
File:116.jpg |link=116 |[[Hand truck, red ID:116]]
File:117.jpg |link=117 |[[Hot-wire foam cutter, handheld, 4.5"×5.5" (Woodland Scenics) ID:117]]
File:118.jpg |link=118 |[[Hot-wire foam cutter, tabletop, 14"×12" ID:118]]
File:127.jpg |link=127 |[[Oil can, blue ID:127]]
File:128.jpg |link=128 |[[Painting tools ID:128]]
File:129.jpg |link=129 |[[Pinball machine (Williams Road Kings) ID:129]]
File:130.jpg |link=130 |[[Sandblasting cabinet, floor, blue (Powerfist) ID:130]]
File:131.jpg |link=131 |[[Screwdriver magnetizer/demagnetizer (Wiha 40010) ID:131]]
File:120.jpg |link=120 |[[Sewing machine, domestic (Singer 1802) ID:120]]
File:132.jpg |link=132 |[[Shop vacuum, orange ID:132]]
File:133.jpg |link=133 |[[Staple gun (Arrow T-18) ID:133]]
File:122.jpg |link=122 |[[Tile work surfaces ID:122]]
File:123.jpg |link=123 |[[Tile work surfaces ID:123]]
File:134.jpg |link=134 |[[Vacuum cart ID:134]]
File:136.jpg |link=136 |[[Vacuum cleaner, portable ID:136]]
File:135.jpg |link=135 |[[Vacuum pump ID:135]]
File:137.jpg |link=137 |[[Vacuum pump (Edwards SpeediVac ED200) ID:137]]
</gallery>

* Vacuum Former (under construction Aug 2017)

==Removed equipment==

In case they are brought back, or, so people who could have sworn we had a tool know it was removed.

<gallery>

File:3DP_RapMan.jpg |link=3D printer (3D Systems RapMan) |[[3D printer (3D Systems RapMan)]]
File:3D printer, Come3D!.jpg |link=3D printer (Come3D!) |[[3D printer (Come3D!)]]
File:3DP_Cupcake.jpg |link=3D printer (MakerBot Cupcake) |[[3D printer (MakerBot Cupcake)]]
File:1.jpg |link=1 |[[3D printer, FFF (IIIP) ID:1]]
File:3D printer, Nathan Ward's RepRap.jpg |link=3D printer, FFF (RepRap) |[[3D printer, FFF (RepRap)]]
File:3D printer, Yin's Wanhao.jpg |link=3D printer, FFF (Wanhao Duplicator i3) |[[3D printer, FFF (Wanhao Duplicator i3)]]
File:InVision si2.jpg |link=3D printer, MJM (3D Systems InVision si2) |[[3D printer, MJM (3D Systems InVision si2)]]
File:5.jpg |link=5 |[[3D printer, SLA (mUVe 1) ID:5]]
File:Compressor_Dewalt.jpg |link=Air compressor, 4-gallon (DeWalt) |[[Air compressor, 4-gallon (DeWalt)]]
File:Compressor_Big.jpg |link=Air compressor, 17-gallon |[[Air compressor, 17-gallon]]
File:Reciprocating_compressor.jpg |link=Air compressor, 80-gallon (Ingersoll Rand T30) |[[Air compressor, 80-gallon (Ingersoll Rand T30)]]
File:Angle_Grinder.jpg |link=Angle grinder (Kawasaki) |[[Angle grinder (Kawasaki)]]
File:Anvil_75lb.jpg |link=Anvil |[[Anvil]]
File:Bandsaw_Horizontal.jpg |link=Bandsaw, metal, horizontal (Craftex B013N) |[[Bandsaw, metal, horizontal (Craftex B013N)]]
File:Horizontal bandsaw, old.jpg |link=Bandsaw, metal, horizontal (Pit Bull) |[[Bandsaw, metal, horizontal (Pit Bull)]]
File:Bending_Brake.jpg |link=Bending brake, 30" (Powerfist) |[[Bending brake, 30" (Powerfist)]]
File:114.jpg |link=114 |[[Bicycle tire jig ID:114]]
File:Buffer_Benchtop.jpg |link=Buffer (Clarke 2H 5AB) |[[Buffer (Clarke 2H 5AB)]]
File:Dewars.jpg |link=Dewars, 50-litre |[[Dewars, 50-litre]]
File:Drill_Dewalt.jpg |link=Drill, corded (DeWalt) |[[Drill, corded (DeWalt)]]
File:Pick_N_Place.jpg |link=Electronics assembly pick and place machine (Multitronics 2000LX) |[[Electronics assembly pick and place machine (Multitronics 2000LX)]]
File:Forge_Propane_2.jpg |link=Forge, propane (Jim's) |[[Forge, propane (Jim's)]]
File:43.jpg |link=43 |[[Forge (Travis's) ID:43]]
File:17.jpg |link=17 |[[Function generator (Krohn–Hite 5100A) ID:17]]
File:Impact_Driver.jpg |link=Impact driver (DeWalt) |[[Impact driver (DeWalt)]]
File:Work light, B&D FireStorm.jpg |link=Lamp, cordless (Black & Decker FireStorm) |[[Lamp, cordless (Black & Decker FireStorm)]]
File:7.jpg |link=7 |[[Laser cutter, small ID:7]]
File:Lathe, South Bend.jpg |link=Lathe, metal (South Bend) |[[Lathe, metal (South Bend)]]
File:Lathe, Torrent T.72-42.jpg |link=Lathe, metal (Torrent T.72-42) |[[Lathe, metal (Torrent T.72-42)]]
File:Lathe_Mill.jpg |link=Lathe–mill combination (Craftex B2229) |[[Lathe–mill combination (Craftex B2229)]]
File:Lathe_Wood_Mini.jpg |link=Lathe, wood (Haussmann) |[[Lathe, wood (Haussmann)]]
File:MaxNC10.jpg |link=Milling machine, CNC, mini (MAXNC 10) |[[Milling machine, CNC, mini (MAXNC 10)]]
File:CNC mill (Terry's).jpg |link=Milling machine, CNC (Terry's) |[[Milling machine, CNC (Terry's)]]
File:DMM, Excel DT9205A.jpg |link=Multimeter, digital (Excel DT9205A) |[[Multimeter, digital (Excel DT9205A)]]
File:DMM, Powerfist DT 9208.jpg |link=Multimeter, digital (Powerfist DT 9208A) |[[Multimeter, digital (Powerfist DT 9208A)]]
File:Audio mixing board.jpg |link=PA system (Dan Damron's) |[[PA system (Dan Damron's)]]
File:50.jpg |link=50 |[[Oxyacetylene torch, large ID:50]]
File:Parts washer, Powerfist 3.5 L.jpg |link=Parts washer, 3.5 L (Powerfist) |[[Parts washer, 3.5 L (Powerfist)]]
File:Plasma cutter, Hypertherm 45.jpg |link=Plasma cutter (Hypertherm 45) |[[Plasma cutter (Hypertherm 45)]]
File:plasma_cutter.thumbnail.jpg |link=Plasma cutter, CNC (Kyle Paavola's) |[[Plasma cutter, CNC (Kyle Paavola's)]]
File:Router_Plunge_Makita.jpg |link=Router, plunge (Makita 3612BR) |[[Router, plunge (Makita 3612BR)]]
File:Plunge router (green).jpg |link=Router, green |[[Router, green]]
File:10.jpg |link=10 |[[Press (Powerfist) ID:10]]
File:NoImage.png |link=81 |[[Router table, wooden ID:81]]
File:87.jpg |link=87 |[[87|Sander, random orbital (Skil 7492) ID:87]]
File:Chop_Saw.jpg |link=Saw, compound mitre (Ryobi) |[[Saw, compound mitre (Ryobi)]]
File:Chopsaw_Metal.jpg |link=Saw, compound mitre, metal (Ryobi) |[[Saw, compound mitre, metal (Ryobi)]]
File:Reciprocating_Saw.jpg |link=Saw, sabre (Mastercraft) |[[Saw, sabre (Mastercraft)]]
File:Skil_Saw_BD.jpg |link=Saw, handheld circular, 7 1/4" (Black & Decker) |[[Saw, handheld circular, 7 1/4" (Black & Decker)]]
File:Skil_Saw_Red.jpg |link=Saw, handheld circular (Skil) |[[Saw, handheld circular (Skil)]]
File:Electric screwdriver, cordless, B&D FireStorm (small).jpg |link=Screwdriver, electric, cordless (Black & Decker FireStorm, small) |[[Screwdriver, electric, cordless (Black & Decker FireStorm, small)]]
File:119.jpg |link=119 |[[Sewing machine, industrial (Relsew) ID:119]]
File:Shaper, metal.jpg |link=Shaper, 7" |[[Shaper, 7"]]
File:Taps_Grey.jpg |link=Tap & die set (Mastercraft) |[[Tap & die set (Mastercraft)]]
File:OxyAce_Mini.jpg |link=Torch, oxygen–acetylene, mini |[[Torch, oxygen–acetylene, mini]]
File:Vice_Medium.jpg |link=Vise, medium (Irwin) |[[Vise, medium (Irwin)]]
File:Welder_MIG.jpg |link=Welder, MIG (Lincoln Weld-Pak 100) |[[Welder, MIG (Lincoln Weld-Pak 100)]]
File:55.jpg |link=55 |[[Welder, stick, orange (Acklands 225 AC Sizzler) ID:55]]
File:109.jpg |link=109 |[[Welder, Stick, AC/DC (Miller Thunderbolt XL) ID:109]]
</gallery>

* 3D Printer (Ultimaker) - Brian Queen - ?? - Working okay, needs heated bed - ??
* Compressor (small/black), Air Tank, Controls & Air Dryer - circuithacker & 19200baud - Loaned While Members - Needs plumbing and wiring fix
* Sewing Machine (Singer 730) - ?? - ?? - Marginally Working - ??
* Sewing Machine (EuroPro) - ?? - ?? - Needs Fixing - ??
* Sewing Machine (Kenmore) - Gina N - Donated to Protospace - Working - Open To Members

Sander, random orbital (Skil) ID:87

2019-10-21T05:34:25Z

Cjs: minor reformatting

{{Equipment page removed
| toolname = Random orbital sander
| model = Skil 7492
| serial =
| owner =
| loanstatus =
| arrived = Before 2014-10-30
| location = Woodworking shop
| status =
| permission =
| certification =
| id = 87
| removedby =
| removalreason =
| removaldate = Before 2019-10-19
| replacements = Ridgid random orbital sanders ([[138]], [[139]])
}}

==Documentation==

* [https://images.homedepot-static.com/catalog/pdfImages/47/47462ce0-58ab-41d1-ae0c-04ab7d72f876.pdf Manual]

Tile work surfaces ID:123

2019-10-21T05:28:58Z

Cjs: minor reformatting

{{Equipment page
|toolname = Tile work surfaces
|model = ceramic, 6" square
|serial = N/A
|owner = Ian Oliver
|loanstatus = Donation to Protospace
|arrived = December 2017
|location = Electronics lab
|status = Being built
|permission = Open to all
|certification = None
|id = 123
}}

[[Category:Work-holding tools]]

Tile work surfaces ID:122

2019-10-21T05:27:44Z

Cjs: minor reformatting

{{Equipment page
|toolname = Tile work surfaces
|model = marble, 12" square
|serial = N/A
|owner = Ian Oliver
|loanstatus = Donation to Protospace
|arrived = December 2017
|location = Electronics lab
|status = Being built
|permission = Open to all
|certification = None
|id = 122
}}

[[Category:Work-holding tools]]

Sander, random orbital ID:139

2019-10-19T18:36:05Z

Cjs: added usage note about storage

{{Equipment page
| toolname = Random orbital sander
| model = Ridgid R2601
| serial =
| owner =
| loanstatus =
| arrived = 2019-10-17
| location = Woodworking shop
| status = Working
| permission =
| certification =
| id = 139
}}

==Usage notes==

To prevent the velcro pads that the sanding discs attach to from getting filled with debris, a sanding disc (even a junky one) should remain attached to the sander while it is stored.

==Documentation==

* [https://cdn2.ridgid.com/resources/media?key=e83ed4f1-906d-469f-9584-150692f6d3a0&languageCode=en&countryCode=US&type=document Manual]
* [https://cdn2.ridgid.com/resources/media?key=9d3f043d-1a72-4ded-9601-c8c36349d23b&languageCode=en&countryCode=US&type=document Parts list]

Sander, random orbital ID:138

2019-10-19T18:34:30Z

Cjs: added usage note about storage

{{Equipment page
| toolname = Random orbital sander
| model = Ridgid R2601
| serial =
| owner =
| loanstatus =
| arrived = 2019-10-17
| location = Woodworking shop
| status = Working
| permission =
| certification =
| id = 138
}}

==Usage notes==

To prevent the velcro pads that the sanding discs attach to from getting filled with debris, a sanding disc (even a junky one) should remain attached to the sander while it is stored.

==Documentation==

* [https://cdn2.ridgid.com/resources/media?key=e83ed4f1-906d-469f-9584-150692f6d3a0&languageCode=en&countryCode=US&type=document Manual]
* [https://cdn2.ridgid.com/resources/media?key=9d3f043d-1a72-4ded-9601-c8c36349d23b&languageCode=en&countryCode=US&type=document Parts list]

Sander, random orbital (Skil) ID:87

2019-10-19T18:26:53Z

Cjs: added replacement tools

{{Equipment page removed
| toolname = Random orbital sander
| model = Skil 7492
| serial =
| owner =
| loanstatus =
| arrived = Before 2014-10-30
| location = Woodworking shop
| status =
| permission =
| certification =
| id = 87
| removedby =
| removalreason =
| removaldate = Before 2019-10-19
| replacements = Ridgid random orbital sanders ([[138]], [[139]])
}}

==Documentation==

[https://images.homedepot-static.com/catalog/pdfImages/47/47462ce0-58ab-41d1-ae0c-04ab7d72f876.pdf Manual]

Vacuum cart ID:134

2019-10-19T18:21:43Z

Cjs: updated location

{{Equipment page
| toolname = Vacuum cart
| model = DIY
| serial = N/A
| owner = Janet M
| loanstatus = Semi-permanent loan
| arrived = Before 2014-10-29
| location = Laser cutter area
| status = Working
| permission = Open to Members
| certification = Demo required
| id = 134
}}

==Usage notes==

* Uses vacuum pump to create powerful vacuum, slowly.
* Stores vacuum, optionally, in two 14" diameter storage tanks, takes several minutes to charge.
* Cart contains vacuum degassing chamber, to remove bubbles from fast setting epoxies
* Ball valves allow vacuum to be dumped from the storage tanks into the degassing chamber instantly.
* Has small vacuformer (6 inch x 8 inch)
* Plans for full size vacuum bed with infra-red bulb-based plastic heater above.
* Mates with 8' vacuum cannon accessory too.
* Doesn't like to run without resistance.
* There should be a minimum 5:1 ratio of liquid you are degassing to chamber size (the amount you're degassing is no more than 1/5 the size of the chamber).
* Try to avoid degassing anything that will boil under vacuum at 20 degrees Celsius (this includes water) as it will contaminate the oil in the vacuum pump. This is because we are not running a cold trap like a fancy laboratory.
* Other than that its pretty much mechanically self explanatory, the two large tanks are there so you can pre vac them out and use them to pull the chamber down quickly if you have a fast setting resin.

==Specs==

Tools we have

2019-10-19T18:17:11Z

Cjs: moved 87 to removed equipment

'''Adding a new tool to the wiki?''' Follow this [[Adding New Tools Procedure|procedure]].

We can always use new tools! Please feel free to [[List of links and email addresses|contact Protospace]] to donate, arrange for pickup, or drop them off in person.

If you are interested in knowing what kind of tools we are looking for, we also have a member-managed [[Tools we want|tool wishlist]], but your best bet on figuring out if we want something is simply asking on our [https://groups.google.com/forum/#!forum/protospace-discuss discussion group].

We also have [[:Category:Tools|an alphabetically ordered and categorized tool catalog]].

{{Warning|Treat the tools at Protospace with respect! Clean, functioning tools make for a happy crowd.}}

==Rapid prototyping tools==
:''Comparisons: [[our 3D printers]], [[our laser cutters]]''
<gallery>

File:2.jpg |link=2 |[[3D printer, FFF (ORD Bot Hadron) ID:2]]
File:125.jpg |link=125 |[[3D printer, FFF (ORD Bot Hadron) ID:125]]
File:126.jpg |link=126 |[[3D printer, FFF (ORD Bot Hadron) ID:126]]
File:3.jpg |link=3 |[[3D printer, FFF (PrusaMD) ID:3]]
File:4.jpg |link=4 |[[3D printer, FFF, delta (Kossel) ID:4]]
File:6.jpg |link=6 |[[Laser cutter, large (Rabbit Laser RL-80-1290) ID:6]]
File:107.jpg |link=107 |[[Laser cutter (Trotec Speedy 300) ID:107]]
</gallery>

==Automotive tools==

<gallery>

File:8.jpg |link=8 |[[Floor jack, blue ID:8]]
File:9.jpg |link=9 |[[Trolley jack and axle stand kit (Certified) ID:9]]
File:11.jpg |link=11 |[[Socket set ID:11]]
</gallery>

==Chemistry==

<gallery>

File:12.jpg |link=12 |[[Oxygen concentrator (OGSI OG-15) ID:12]]
</gallery>

==Electronics tools==

<gallery>

File:13.jpg |link=13 |[[Counter (Fluke 1910A Multi-Counter) ID:13]]
File:14.jpg |link=14 |[[Counter (Lafayette 54517) ID:14]]
File:15.jpg |link=15 |[[Decade box, capacitance (Servomex Controls Decade Capacitor Type B) ID:15]]
File:16.jpg |link=16 |[[Function generator (John's) ID:16]]
File:18.jpg |link=18 |[[Heat gun (Powerfist) ID:18]]
File:19.jpg |link=19 |[[Logic analyzer (HP 1631D) ID:19]]
File:20.jpg |link=20 |[[Multimeter, digital (Pro.Point 8344665) ID:20]]
File:21.jpg |link=21 |[[Oscilloscope (Brunelle 2925) ID:21]]
File:22.jpg |link=22 |[[Oscilloscope (Kikusui COS 5060) ID:22]]
File:23.jpg |link=23 |[[Oscilloscope (Tektronix 2225) ID:23]]
File:24.jpg |link=24 |[[Oscilloscope (Tektronix 2465A) ID:24]]
File:25.jpg |link=25 |[[Oscilloscope, PC (Syscomp DSO-101) ID:25]]
File:26.jpg |link=26 |[[Power supply, bench (GQ Electronics GQ-A305D) ID:26]]
File:27.jpg |link=27 |[[Power supply, bench, 500 V (Heathkit PS-3) ID:27]]
File:28.jpg |link=28 |[[Power supply, bench, 2-channel (TENMA 72-7245) ID:28]]
File:29.jpg |link=29 |[[Reflow oven (Hamilton Beach) ID:29]]
File:30.jpg |link=30 |[[Hot-air rework station (GQ Electronics 5200) ID:30]]
File:31.jpg |link=31 |[[Solder fume extractor (Metcal) ID:31]]
File:32.jpg |link=32 |[[UV photomasker (Dan's) ID:32]]
File:33.jpg |link=33 |[[Waveform generator (Syscomp WGM-101) ID:33]]
File:34.jpg |link=34 |[[Waveform monitor (Tektronix 1730) ID:34]]
</gallery>

==Metalworking tools==

<gallery>

File:35.jpg |link=35 |[[Angle grinder (DeWalt) ID:35]]
File:36.jpg |link=36 |[[Anvil (Chris's) ID:36]]
File:37.jpg |link=37 |[[Bandsaw, metal, horizontal ID:37]]
File:38.jpg |link=38 |[[Bench grinder (Baldor) ID:38]]
File:39.jpg |link=39 |[[Bench grinder (Powerfist) ID:39]]
File:40.jpg |link=40 |[[Bench grinder (Trademaster PR14210) ID:40]]
File:41.jpg |link=41 |[[Brake, box and pan, 24" (Magnum) ID:41]]
File:42.jpg |link=42 |[[Drill press (Mastercraft) ID:42]]
File:44.jpg |link=44 |[[Forge, propane, pass-through ID:44]]
File:45.jpg |link=45 |[[Foundry, propane ID:45]]
File:121.jpg |link=121 |[[Hydraulic press, 50-ton, electric ID:121]]
File:46.jpg |link=46 |[[Lathe, metal (Challenger 1660G) ID:46]]
File:47.jpg |link=47 |[[Lathe, miniature (Taig Microlathe II) ID:47]]
File:53.jpg |link=53 |[[Metal shear (Magnum) ID:53]]
File:48.jpg |link=48 |[[Milling machine (ACRA AM4V) ID:48]]
File:49.jpg |link=49 |[[Milling machine, CNC (Tormach PCNC 1100) ID:49]]
File:51.jpg |link=51 |[[Plasma cutter, huge (Powercut 1500) ID:51]]
File:52.jpg |link=52 |[[Plasma cutter, small (Miller Spectrum 375) ID:52]]
File:54.jpg |link=54 |[[Vise, giant ID:54]]
File:56.jpg |link=56 |[[Welding magnets ID:56]]
File:96.jpg |link=96 |[[Spot welder ID:96]]
</gallery>

==Woodworking and plasticworking tools==

<gallery>

File:57.jpg |link=57 |[[Bandsaw, green ID:57]]
File:105.jpg |link=105 |[[Bandsaw (Shop Fox W1706) ID:105]]
File:58.jpg |link=58 |[[Belt and disc sander (CWD 15-315) ID:58]]
File:59.jpg |link=59 |[[Clamps ID:59]]
File:60.jpg |link=60 |[[Drill, hand, corded (Black & Decker) ID:60]]
File:61.jpg |link=61 |[[Drill, hand, corded, black (Jobmate) ID:61]]
File:62.jpg |link=62 |[[Drill, hand, corded, dark blue (Ryobi) ID:62]]
File:63.jpg |link=63 |[[Drill, hand, cordless (Black & Decker) ID:63]]
File:64.jpg |link=64 |[[Drill, hand, cordless (Black & Decker FireStorm) ID:64]]
File:65.jpg |link=65 |[[Drill, hand, cordless, with detachable chuck (Black & Decker FireStorm) ID:65]]
File:66.jpg |link=66 |[[Drill, hand, cordless, with quick connector (Black & Decker FireStorm) ID:66]]
File:67.jpg |link=67 |[[Drill, hand, cordless (DeWalt) ID:67]]
File:68.jpg |link=68 |[[Drill, hand, corded (Makita DP3720) ID:68]]
File:69.jpg |link=69 |[[Drill press, 8" (Jobmate) ID:69]]
File:70.jpg |link=70 |[[Jigsaw, corded (Black & Decker) ID:70]]
File:71.jpg |link=71 |[[Jigsaw, cordless (Black & Decker FireStorm) ID:71]]
File:72.jpg |link=72 |[[Jigsaw (Skil) ID:72]]
File:73.jpg |link=73 |[[Jointer, grey ID:73]]
File:74.jpg |link=74 |[[Miter saw, compound, sliding (Hitachi) ID:74]]
File:75.jpg |link=75 |[[Nailer, pneumatic, 2-in-1 ID:75]]
File:108.jpg |link=108 |[[Planer (Jet JPM-13CS) ID:108]]
File:76.jpg |link=76 |[[Plate joiner (Porter Cable 557) ID:76]]
File:77.jpg |link=77 |[[Radial arm saw (Craftsman) ID:77]]
File:78.jpg |link=78 |[[Rotary tool, corded (Mastercraft) ID:78]]
File:79.jpg |link=79 |[[Rotary tool, cordless (Dremel) ID:79]]
File:80.jpg |link=80 |[[Router table (Craftsman) ID:80]]
File:124.jpg |link=124 |[[Router table (Jeff's) ID:124]]
File:82.jpg |link=82 |[[Sabre saw (Black & Decker FireStorm) ID:82]]
File:83.jpg |link=83 |[[Sander, belt (Makita 9402) ID:83]]
File:84.jpg |link=84 |[[Sander, belt/disc (Dremel 730) ID:84]]
File:85.jpg |link=85 |[[Sander, detail (Ryobi) ID:85]]
File:106.jpg |link=106 |[[Sander, drum (General International 15-250 M1) ID:106]]
File:86.jpg |link=86 |[[Sander, hand, cordless (Black & Decker FireStorm) ID:86]]
File:138.jpg |link=138 |[[Sander, random orbital ID:138]]
File:139.jpg |link=139 |[[Sander, random orbital ID:139]]
File:88.jpg |link=88 |[[Sander, straight-line/orbital (Black & Decker Deluxe) ID:88]]
File:89.jpg |link=89 |[[Scroll saw (Dremel) ID:89]]
File:90.jpg |link=90 |[[Scroll saw (Mastercraft 55-6714-6) ID:90]]
File:91.jpg |link=91 |[[Table saw (Craftex CX201) ID:91]]
File:92.jpg |link=92 |[[Thickness planer (Ryobi AP1301) ID:92]]
File:93.jpg |link=93 |[[Vacuum, sawdust (Craftex CX404) ID:93]]
File:94.jpg |link=94 |[[Vise, wood ID:94]]
File:95.jpg |link=95 |[[Vise, wood (Travis's) ID:95]]
</gallery>

==Measuring and inspection tools==
See also the [[#Electronics Tools|Electronics Tools section on this page]] for electrical and electronic measurement and test equipment.
<gallery>

File:97.jpg |link=97 |[[Inspection mirror, 18" gooseneck ID:97]]
File:98.jpg |link=98 |[[Magnifier lamp, large, with lid ID:98]]
File:99.jpg |link=99 |[[Magnifier lamp, large, without lid ID:99]]
File:100.jpg |link=100 |[[Magnifier lamp, small, with lid ID:100]]
File:101.jpg |link=101 |[[Measuring tapes ID:101]]
File:102.jpg |link=102 |[[Rulers ID:102]]
File:103.jpg |link=103 |[[Squares ID:103]]
File:104.jpg |link=104 |[[Thermometer, infrared (H64) ID:104]]
</gallery>

==Miscellaneous tools==

<gallery>

File:110.jpg |link=110 |[[Air compressor, 60-gallon (Campbell Hausfeld) ID:110]]
File:111.jpg |link=111 |[[Air compressor, 80-gallon (MAXair Premium) ID:111]]
File:112.jpg |link=112 |[[Air compressor, silent ID:112]]
File:113.jpg |link=113 |[[Air pump, foot-operated (Bell FootPumper) ID:113]]
File:115.jpg |link=115 |[[Engraver ID:115]]
File:116.jpg |link=116 |[[Hand truck, red ID:116]]
File:117.jpg |link=117 |[[Hot-wire foam cutter, handheld, 4.5"×5.5" (Woodland Scenics) ID:117]]
File:118.jpg |link=118 |[[Hot-wire foam cutter, tabletop, 14"×12" ID:118]]
File:127.jpg |link=127 |[[Oil can, blue ID:127]]
File:128.jpg |link=128 |[[Painting tools ID:128]]
File:129.jpg |link=129 |[[Pinball machine (Williams Road Kings) ID:129]]
File:130.jpg |link=130 |[[Sandblasting cabinet, floor, blue (Powerfist) ID:130]]
File:131.jpg |link=131 |[[Screwdriver magnetizer/demagnetizer (Wiha 40010) ID:131]]
File:120.jpg |link=120 |[[Sewing machine, domestic (Singer 1802) ID:120]]
File:132.jpg |link=132 |[[Shop vacuum, orange ID:132]]
File:133.jpg |link=133 |[[Staple gun (Arrow T-18) ID:133]]
File:122.jpg |link=122 |[[Tile work surfaces ID:122]]
File:123.jpg |link=123 |[[Tile work surfaces ID:123]]
File:134.jpg |link=134 |[[Vacuum cart ID:134]]
File:136.jpg |link=136 |[[Vacuum cleaner, portable ID:136]]
File:135.jpg |link=135 |[[Vacuum pump ID:135]]
File:137.jpg |link=137 |[[Vacuum pump (Edwards SpeediVac ED200) ID:137]]
</gallery>

* Vacuum Former (under construction Aug 2017)

==Removed equipment==

In case they are brought back, or, so people who could have sworn we had a tool know it was removed.

<gallery>

File:3DP_RapMan.jpg |link=3D printer (3D Systems RapMan) |[[3D printer (3D Systems RapMan)]]
File:3D printer, Come3D!.jpg |link=3D printer (Come3D!) |[[3D printer (Come3D!)]]
File:3DP_Cupcake.jpg |link=3D printer (MakerBot Cupcake) |[[3D printer (MakerBot Cupcake)]]
File:1.jpg |link=1 |[[3D printer, FFF (IIIP) ID:1]]
File:3D printer, Nathan Ward's RepRap.jpg |link=3D printer, FFF (RepRap) |[[3D printer, FFF (RepRap)]]
File:3D printer, Yin's Wanhao.jpg |link=3D printer, FFF (Wanhao Duplicator i3) |[[3D printer, FFF (Wanhao Duplicator i3)]]
File:InVision si2.jpg |link=3D printer, MJM (3D Systems InVision si2) |[[3D printer, MJM (3D Systems InVision si2)]]
File:5.jpg |link=5 |[[3D printer, SLA (mUVe 1) ID:5]]
File:Compressor_Dewalt.jpg |link=Air compressor, 4-gallon (DeWalt) |[[Air compressor, 4-gallon (DeWalt)]]
File:Compressor_Big.jpg |link=Air compressor, 17-gallon |[[Air compressor, 17-gallon]]
File:Reciprocating_compressor.jpg |link=Air compressor, 80-gallon (Ingersoll Rand T30) |[[Air compressor, 80-gallon (Ingersoll Rand T30)]]
File:Angle_Grinder.jpg |link=Angle grinder (Kawasaki) |[[Angle grinder (Kawasaki)]]
File:Anvil_75lb.jpg |link=Anvil |[[Anvil]]
File:Bandsaw_Horizontal.jpg |link=Bandsaw, metal, horizontal (Craftex B013N) |[[Bandsaw, metal, horizontal (Craftex B013N)]]
File:Horizontal bandsaw, old.jpg |link=Bandsaw, metal, horizontal (Pit Bull) |[[Bandsaw, metal, horizontal (Pit Bull)]]
File:Bending_Brake.jpg |link=Bending brake, 30" (Powerfist) |[[Bending brake, 30" (Powerfist)]]
File:114.jpg |link=114 |[[Bicycle tire jig ID:114]]
File:Buffer_Benchtop.jpg |link=Buffer (Clarke 2H 5AB) |[[Buffer (Clarke 2H 5AB)]]
File:Dewars.jpg |link=Dewars, 50-litre |[[Dewars, 50-litre]]
File:Drill_Dewalt.jpg |link=Drill, corded (DeWalt) |[[Drill, corded (DeWalt)]]
File:Pick_N_Place.jpg |link=Electronics assembly pick and place machine (Multitronics 2000LX) |[[Electronics assembly pick and place machine (Multitronics 2000LX)]]
File:Forge_Propane_2.jpg |link=Forge, propane (Jim's) |[[Forge, propane (Jim's)]]
File:43.jpg |link=43 |[[Forge (Travis's) ID:43]]
File:17.jpg |link=17 |[[Function generator (Krohn–Hite 5100A) ID:17]]
File:Impact_Driver.jpg |link=Impact driver (DeWalt) |[[Impact driver (DeWalt)]]
File:Work light, B&D FireStorm.jpg |link=Lamp, cordless (Black & Decker FireStorm) |[[Lamp, cordless (Black & Decker FireStorm)]]
File:7.jpg |link=7 |[[Laser cutter, small ID:7]]
File:Lathe, South Bend.jpg |link=Lathe, metal (South Bend) |[[Lathe, metal (South Bend)]]
File:Lathe, Torrent T.72-42.jpg |link=Lathe, metal (Torrent T.72-42) |[[Lathe, metal (Torrent T.72-42)]]
File:Lathe_Mill.jpg |link=Lathe–mill combination (Craftex B2229) |[[Lathe–mill combination (Craftex B2229)]]
File:Lathe_Wood_Mini.jpg |link=Lathe, wood (Haussmann) |[[Lathe, wood (Haussmann)]]
File:MaxNC10.jpg |link=Milling machine, CNC, mini (MAXNC 10) |[[Milling machine, CNC, mini (MAXNC 10)]]
File:CNC mill (Terry's).jpg |link=Milling machine, CNC (Terry's) |[[Milling machine, CNC (Terry's)]]
File:DMM, Excel DT9205A.jpg |link=Multimeter, digital (Excel DT9205A) |[[Multimeter, digital (Excel DT9205A)]]
File:DMM, Powerfist DT 9208.jpg |link=Multimeter, digital (Powerfist DT 9208A) |[[Multimeter, digital (Powerfist DT 9208A)]]
File:Audio mixing board.jpg |link=PA system (Dan Damron's) |[[PA system (Dan Damron's)]]
File:50.jpg |link=50 |[[Oxyacetylene torch, large ID:50]]
File:Parts washer, Powerfist 3.5 L.jpg |link=Parts washer, 3.5 L (Powerfist) |[[Parts washer, 3.5 L (Powerfist)]]
File:Plasma cutter, Hypertherm 45.jpg |link=Plasma cutter (Hypertherm 45) |[[Plasma cutter (Hypertherm 45)]]
File:plasma_cutter.thumbnail.jpg |link=Plasma cutter, CNC (Kyle Paavola's) |[[Plasma cutter, CNC (Kyle Paavola's)]]
File:Router_Plunge_Makita.jpg |link=Router, plunge (Makita 3612BR) |[[Router, plunge (Makita 3612BR)]]
File:Plunge router (green).jpg |link=Router, green |[[Router, green]]
File:10.jpg |link=10 |[[Press (Powerfist) ID:10]]
File:NoImage.png |link=81 |[[Router table, wooden ID:81]]
File:87.jpg |link=87 |[[Sander, random orbital (Skil) ID:87]]
File:Chop_Saw.jpg |link=Saw, compound mitre (Ryobi) |[[Saw, compound mitre (Ryobi)]]
File:Chopsaw_Metal.jpg |link=Saw, compound mitre, metal (Ryobi) |[[Saw, compound mitre, metal (Ryobi)]]
File:Reciprocating_Saw.jpg |link=Saw, sabre (Mastercraft) |[[Saw, sabre (Mastercraft)]]
File:Skil_Saw_BD.jpg |link=Saw, handheld circular, 7 1/4" (Black & Decker) |[[Saw, handheld circular, 7 1/4" (Black & Decker)]]
File:Skil_Saw_Red.jpg |link=Saw, handheld circular (Skil) |[[Saw, handheld circular (Skil)]]
File:Electric screwdriver, cordless, B&D FireStorm (small).jpg |link=Screwdriver, electric, cordless (Black & Decker FireStorm, small) |[[Screwdriver, electric, cordless (Black & Decker FireStorm, small)]]
File:119.jpg |link=119 |[[Sewing machine, industrial (Relsew) ID:119]]
File:Shaper, metal.jpg |link=Shaper, 7" |[[Shaper, 7"]]
File:Taps_Grey.jpg |link=Tap & die set (Mastercraft) |[[Tap & die set (Mastercraft)]]
File:OxyAce_Mini.jpg |link=Torch, oxygen–acetylene, mini |[[Torch, oxygen–acetylene, mini]]
File:Vice_Medium.jpg |link=Vise, medium (Irwin) |[[Vise, medium (Irwin)]]
File:Welder_MIG.jpg |link=Welder, MIG (Lincoln Weld-Pak 100) |[[Welder, MIG (Lincoln Weld-Pak 100)]]
File:55.jpg |link=55 |[[Welder, stick, orange (Acklands 225 AC Sizzler) ID:55]]
File:109.jpg |link=109 |[[Welder, Stick, AC/DC (Miller Thunderbolt XL) ID:109]]
</gallery>

* 3D Printer (Ultimaker) - Brian Queen - ?? - Working okay, needs heated bed - ??
* Compressor (small/black), Air Tank, Controls & Air Dryer - circuithacker & 19200baud - Loaned While Members - Needs plumbing and wiring fix
* Sewing Machine (Singer 730) - ?? - ?? - Marginally Working - ??
* Sewing Machine (EuroPro) - ?? - ?? - Needs Fixing - ??
* Sewing Machine (Kenmore) - Gina N - Donated to Protospace - Working - Open To Members

Tools we have

2019-10-19T18:14:46Z

Cjs: added 138 and 139 under woodworking tools

'''Adding a new tool to the wiki?''' Follow this [[Adding New Tools Procedure|procedure]].

We can always use new tools! Please feel free to [[List of links and email addresses|contact Protospace]] to donate, arrange for pickup, or drop them off in person.

If you are interested in knowing what kind of tools we are looking for, we also have a member-managed [[Tools we want|tool wishlist]], but your best bet on figuring out if we want something is simply asking on our [https://groups.google.com/forum/#!forum/protospace-discuss discussion group].

We also have [[:Category:Tools|an alphabetically ordered and categorized tool catalog]].

{{Warning|Treat the tools at Protospace with respect! Clean, functioning tools make for a happy crowd.}}

==Rapid prototyping tools==
:''Comparisons: [[our 3D printers]], [[our laser cutters]]''
<gallery>

File:2.jpg |link=2 |[[3D printer, FFF (ORD Bot Hadron) ID:2]]
File:125.jpg |link=125 |[[3D printer, FFF (ORD Bot Hadron) ID:125]]
File:126.jpg |link=126 |[[3D printer, FFF (ORD Bot Hadron) ID:126]]
File:3.jpg |link=3 |[[3D printer, FFF (PrusaMD) ID:3]]
File:4.jpg |link=4 |[[3D printer, FFF, delta (Kossel) ID:4]]
File:6.jpg |link=6 |[[Laser cutter, large (Rabbit Laser RL-80-1290) ID:6]]
File:107.jpg |link=107 |[[Laser cutter (Trotec Speedy 300) ID:107]]
</gallery>

==Automotive tools==

<gallery>

File:8.jpg |link=8 |[[Floor jack, blue ID:8]]
File:9.jpg |link=9 |[[Trolley jack and axle stand kit (Certified) ID:9]]
File:11.jpg |link=11 |[[Socket set ID:11]]
</gallery>

==Chemistry==

<gallery>

File:12.jpg |link=12 |[[Oxygen concentrator (OGSI OG-15) ID:12]]
</gallery>

==Electronics tools==

<gallery>

File:13.jpg |link=13 |[[Counter (Fluke 1910A Multi-Counter) ID:13]]
File:14.jpg |link=14 |[[Counter (Lafayette 54517) ID:14]]
File:15.jpg |link=15 |[[Decade box, capacitance (Servomex Controls Decade Capacitor Type B) ID:15]]
File:16.jpg |link=16 |[[Function generator (John's) ID:16]]
File:18.jpg |link=18 |[[Heat gun (Powerfist) ID:18]]
File:19.jpg |link=19 |[[Logic analyzer (HP 1631D) ID:19]]
File:20.jpg |link=20 |[[Multimeter, digital (Pro.Point 8344665) ID:20]]
File:21.jpg |link=21 |[[Oscilloscope (Brunelle 2925) ID:21]]
File:22.jpg |link=22 |[[Oscilloscope (Kikusui COS 5060) ID:22]]
File:23.jpg |link=23 |[[Oscilloscope (Tektronix 2225) ID:23]]
File:24.jpg |link=24 |[[Oscilloscope (Tektronix 2465A) ID:24]]
File:25.jpg |link=25 |[[Oscilloscope, PC (Syscomp DSO-101) ID:25]]
File:26.jpg |link=26 |[[Power supply, bench (GQ Electronics GQ-A305D) ID:26]]
File:27.jpg |link=27 |[[Power supply, bench, 500 V (Heathkit PS-3) ID:27]]
File:28.jpg |link=28 |[[Power supply, bench, 2-channel (TENMA 72-7245) ID:28]]
File:29.jpg |link=29 |[[Reflow oven (Hamilton Beach) ID:29]]
File:30.jpg |link=30 |[[Hot-air rework station (GQ Electronics 5200) ID:30]]
File:31.jpg |link=31 |[[Solder fume extractor (Metcal) ID:31]]
File:32.jpg |link=32 |[[UV photomasker (Dan's) ID:32]]
File:33.jpg |link=33 |[[Waveform generator (Syscomp WGM-101) ID:33]]
File:34.jpg |link=34 |[[Waveform monitor (Tektronix 1730) ID:34]]
</gallery>

==Metalworking tools==

<gallery>

File:35.jpg |link=35 |[[Angle grinder (DeWalt) ID:35]]
File:36.jpg |link=36 |[[Anvil (Chris's) ID:36]]
File:37.jpg |link=37 |[[Bandsaw, metal, horizontal ID:37]]
File:38.jpg |link=38 |[[Bench grinder (Baldor) ID:38]]
File:39.jpg |link=39 |[[Bench grinder (Powerfist) ID:39]]
File:40.jpg |link=40 |[[Bench grinder (Trademaster PR14210) ID:40]]
File:41.jpg |link=41 |[[Brake, box and pan, 24" (Magnum) ID:41]]
File:42.jpg |link=42 |[[Drill press (Mastercraft) ID:42]]
File:44.jpg |link=44 |[[Forge, propane, pass-through ID:44]]
File:45.jpg |link=45 |[[Foundry, propane ID:45]]
File:121.jpg |link=121 |[[Hydraulic press, 50-ton, electric ID:121]]
File:46.jpg |link=46 |[[Lathe, metal (Challenger 1660G) ID:46]]
File:47.jpg |link=47 |[[Lathe, miniature (Taig Microlathe II) ID:47]]
File:53.jpg |link=53 |[[Metal shear (Magnum) ID:53]]
File:48.jpg |link=48 |[[Milling machine (ACRA AM4V) ID:48]]
File:49.jpg |link=49 |[[Milling machine, CNC (Tormach PCNC 1100) ID:49]]
File:51.jpg |link=51 |[[Plasma cutter, huge (Powercut 1500) ID:51]]
File:52.jpg |link=52 |[[Plasma cutter, small (Miller Spectrum 375) ID:52]]
File:54.jpg |link=54 |[[Vise, giant ID:54]]
File:56.jpg |link=56 |[[Welding magnets ID:56]]
File:96.jpg |link=96 |[[Spot welder ID:96]]
</gallery>

==Woodworking and plasticworking tools==

<gallery>

File:57.jpg |link=57 |[[Bandsaw, green ID:57]]
File:105.jpg |link=105 |[[Bandsaw (Shop Fox W1706) ID:105]]
File:58.jpg |link=58 |[[Belt and disc sander (CWD 15-315) ID:58]]
File:59.jpg |link=59 |[[Clamps ID:59]]
File:60.jpg |link=60 |[[Drill, hand, corded (Black & Decker) ID:60]]
File:61.jpg |link=61 |[[Drill, hand, corded, black (Jobmate) ID:61]]
File:62.jpg |link=62 |[[Drill, hand, corded, dark blue (Ryobi) ID:62]]
File:63.jpg |link=63 |[[Drill, hand, cordless (Black & Decker) ID:63]]
File:64.jpg |link=64 |[[Drill, hand, cordless (Black & Decker FireStorm) ID:64]]
File:65.jpg |link=65 |[[Drill, hand, cordless, with detachable chuck (Black & Decker FireStorm) ID:65]]
File:66.jpg |link=66 |[[Drill, hand, cordless, with quick connector (Black & Decker FireStorm) ID:66]]
File:67.jpg |link=67 |[[Drill, hand, cordless (DeWalt) ID:67]]
File:68.jpg |link=68 |[[Drill, hand, corded (Makita DP3720) ID:68]]
File:69.jpg |link=69 |[[Drill press, 8" (Jobmate) ID:69]]
File:70.jpg |link=70 |[[Jigsaw, corded (Black & Decker) ID:70]]
File:71.jpg |link=71 |[[Jigsaw, cordless (Black & Decker FireStorm) ID:71]]
File:72.jpg |link=72 |[[Jigsaw (Skil) ID:72]]
File:73.jpg |link=73 |[[Jointer, grey ID:73]]
File:74.jpg |link=74 |[[Miter saw, compound, sliding (Hitachi) ID:74]]
File:75.jpg |link=75 |[[Nailer, pneumatic, 2-in-1 ID:75]]
File:108.jpg |link=108 |[[Planer (Jet JPM-13CS) ID:108]]
File:76.jpg |link=76 |[[Plate joiner (Porter Cable 557) ID:76]]
File:77.jpg |link=77 |[[Radial arm saw (Craftsman) ID:77]]
File:78.jpg |link=78 |[[Rotary tool, corded (Mastercraft) ID:78]]
File:79.jpg |link=79 |[[Rotary tool, cordless (Dremel) ID:79]]
File:80.jpg |link=80 |[[Router table (Craftsman) ID:80]]
File:124.jpg |link=124 |[[Router table (Jeff's) ID:124]]
File:82.jpg |link=82 |[[Sabre saw (Black & Decker FireStorm) ID:82]]
File:83.jpg |link=83 |[[Sander, belt (Makita 9402) ID:83]]
File:84.jpg |link=84 |[[Sander, belt/disc (Dremel 730) ID:84]]
File:85.jpg |link=85 |[[Sander, detail (Ryobi) ID:85]]
File:106.jpg |link=106 |[[Sander, drum (General International 15-250 M1) ID:106]]
File:86.jpg |link=86 |[[Sander, hand, cordless (Black & Decker FireStorm) ID:86]]
File:138.jpg |link=138 |[[Sander, random orbital ID:138]]
File:139.jpg |link=139 |[[Sander, random orbital ID:139]]
File:87.jpg |link=87 |[[Sander, random orbital (Skil) ID:87]]
File:88.jpg |link=88 |[[Sander, straight-line/orbital (Black & Decker Deluxe) ID:88]]
File:89.jpg |link=89 |[[Scroll saw (Dremel) ID:89]]
File:90.jpg |link=90 |[[Scroll saw (Mastercraft 55-6714-6) ID:90]]
File:91.jpg |link=91 |[[Table saw (Craftex CX201) ID:91]]
File:92.jpg |link=92 |[[Thickness planer (Ryobi AP1301) ID:92]]
File:93.jpg |link=93 |[[Vacuum, sawdust (Craftex CX404) ID:93]]
File:94.jpg |link=94 |[[Vise, wood ID:94]]
File:95.jpg |link=95 |[[Vise, wood (Travis's) ID:95]]
</gallery>

==Measuring and inspection tools==
See also the [[#Electronics Tools|Electronics Tools section on this page]] for electrical and electronic measurement and test equipment.
<gallery>

File:97.jpg |link=97 |[[Inspection mirror, 18" gooseneck ID:97]]
File:98.jpg |link=98 |[[Magnifier lamp, large, with lid ID:98]]
File:99.jpg |link=99 |[[Magnifier lamp, large, without lid ID:99]]
File:100.jpg |link=100 |[[Magnifier lamp, small, with lid ID:100]]
File:101.jpg |link=101 |[[Measuring tapes ID:101]]
File:102.jpg |link=102 |[[Rulers ID:102]]
File:103.jpg |link=103 |[[Squares ID:103]]
File:104.jpg |link=104 |[[Thermometer, infrared (H64) ID:104]]
</gallery>

==Miscellaneous tools==

<gallery>

File:110.jpg |link=110 |[[Air compressor, 60-gallon (Campbell Hausfeld) ID:110]]
File:111.jpg |link=111 |[[Air compressor, 80-gallon (MAXair Premium) ID:111]]
File:112.jpg |link=112 |[[Air compressor, silent ID:112]]
File:113.jpg |link=113 |[[Air pump, foot-operated (Bell FootPumper) ID:113]]
File:115.jpg |link=115 |[[Engraver ID:115]]
File:116.jpg |link=116 |[[Hand truck, red ID:116]]
File:117.jpg |link=117 |[[Hot-wire foam cutter, handheld, 4.5"×5.5" (Woodland Scenics) ID:117]]
File:118.jpg |link=118 |[[Hot-wire foam cutter, tabletop, 14"×12" ID:118]]
File:127.jpg |link=127 |[[Oil can, blue ID:127]]
File:128.jpg |link=128 |[[Painting tools ID:128]]
File:129.jpg |link=129 |[[Pinball machine (Williams Road Kings) ID:129]]
File:130.jpg |link=130 |[[Sandblasting cabinet, floor, blue (Powerfist) ID:130]]
File:131.jpg |link=131 |[[Screwdriver magnetizer/demagnetizer (Wiha 40010) ID:131]]
File:120.jpg |link=120 |[[Sewing machine, domestic (Singer 1802) ID:120]]
File:132.jpg |link=132 |[[Shop vacuum, orange ID:132]]
File:133.jpg |link=133 |[[Staple gun (Arrow T-18) ID:133]]
File:122.jpg |link=122 |[[Tile work surfaces ID:122]]
File:123.jpg |link=123 |[[Tile work surfaces ID:123]]
File:134.jpg |link=134 |[[Vacuum cart ID:134]]
File:136.jpg |link=136 |[[Vacuum cleaner, portable ID:136]]
File:135.jpg |link=135 |[[Vacuum pump ID:135]]
File:137.jpg |link=137 |[[Vacuum pump (Edwards SpeediVac ED200) ID:137]]
</gallery>

* Vacuum Former (under construction Aug 2017)

==Removed equipment==

In case they are brought back, or, so people who could have sworn we had a tool know it was removed.

<gallery>

File:3DP_RapMan.jpg |link=3D printer (3D Systems RapMan) |[[3D printer (3D Systems RapMan)]]
File:3D printer, Come3D!.jpg |link=3D printer (Come3D!) |[[3D printer (Come3D!)]]
File:3DP_Cupcake.jpg |link=3D printer (MakerBot Cupcake) |[[3D printer (MakerBot Cupcake)]]
File:1.jpg |link=1 |[[3D printer, FFF (IIIP) ID:1]]
File:3D printer, Nathan Ward's RepRap.jpg |link=3D printer, FFF (RepRap) |[[3D printer, FFF (RepRap)]]
File:3D printer, Yin's Wanhao.jpg |link=3D printer, FFF (Wanhao Duplicator i3) |[[3D printer, FFF (Wanhao Duplicator i3)]]
File:InVision si2.jpg |link=3D printer, MJM (3D Systems InVision si2) |[[3D printer, MJM (3D Systems InVision si2)]]
File:5.jpg |link=5 |[[3D printer, SLA (mUVe 1) ID:5]]
File:Compressor_Dewalt.jpg |link=Air compressor, 4-gallon (DeWalt) |[[Air compressor, 4-gallon (DeWalt)]]
File:Compressor_Big.jpg |link=Air compressor, 17-gallon |[[Air compressor, 17-gallon]]
File:Reciprocating_compressor.jpg |link=Air compressor, 80-gallon (Ingersoll Rand T30) |[[Air compressor, 80-gallon (Ingersoll Rand T30)]]
File:Angle_Grinder.jpg |link=Angle grinder (Kawasaki) |[[Angle grinder (Kawasaki)]]
File:Anvil_75lb.jpg |link=Anvil |[[Anvil]]
File:Bandsaw_Horizontal.jpg |link=Bandsaw, metal, horizontal (Craftex B013N) |[[Bandsaw, metal, horizontal (Craftex B013N)]]
File:Horizontal bandsaw, old.jpg |link=Bandsaw, metal, horizontal (Pit Bull) |[[Bandsaw, metal, horizontal (Pit Bull)]]
File:Bending_Brake.jpg |link=Bending brake, 30" (Powerfist) |[[Bending brake, 30" (Powerfist)]]
File:114.jpg |link=114 |[[Bicycle tire jig ID:114]]
File:Buffer_Benchtop.jpg |link=Buffer (Clarke 2H 5AB) |[[Buffer (Clarke 2H 5AB)]]
File:Dewars.jpg |link=Dewars, 50-litre |[[Dewars, 50-litre]]
File:Drill_Dewalt.jpg |link=Drill, corded (DeWalt) |[[Drill, corded (DeWalt)]]
File:Pick_N_Place.jpg |link=Electronics assembly pick and place machine (Multitronics 2000LX) |[[Electronics assembly pick and place machine (Multitronics 2000LX)]]
File:Forge_Propane_2.jpg |link=Forge, propane (Jim's) |[[Forge, propane (Jim's)]]
File:43.jpg |link=43 |[[Forge (Travis's) ID:43]]
File:17.jpg |link=17 |[[Function generator (Krohn–Hite 5100A) ID:17]]
File:Impact_Driver.jpg |link=Impact driver (DeWalt) |[[Impact driver (DeWalt)]]
File:Work light, B&D FireStorm.jpg |link=Lamp, cordless (Black & Decker FireStorm) |[[Lamp, cordless (Black & Decker FireStorm)]]
File:7.jpg |link=7 |[[Laser cutter, small ID:7]]
File:Lathe, South Bend.jpg |link=Lathe, metal (South Bend) |[[Lathe, metal (South Bend)]]
File:Lathe, Torrent T.72-42.jpg |link=Lathe, metal (Torrent T.72-42) |[[Lathe, metal (Torrent T.72-42)]]
File:Lathe_Mill.jpg |link=Lathe–mill combination (Craftex B2229) |[[Lathe–mill combination (Craftex B2229)]]
File:Lathe_Wood_Mini.jpg |link=Lathe, wood (Haussmann) |[[Lathe, wood (Haussmann)]]
File:MaxNC10.jpg |link=Milling machine, CNC, mini (MAXNC 10) |[[Milling machine, CNC, mini (MAXNC 10)]]
File:CNC mill (Terry's).jpg |link=Milling machine, CNC (Terry's) |[[Milling machine, CNC (Terry's)]]
File:DMM, Excel DT9205A.jpg |link=Multimeter, digital (Excel DT9205A) |[[Multimeter, digital (Excel DT9205A)]]
File:DMM, Powerfist DT 9208.jpg |link=Multimeter, digital (Powerfist DT 9208A) |[[Multimeter, digital (Powerfist DT 9208A)]]
File:Audio mixing board.jpg |link=PA system (Dan Damron's) |[[PA system (Dan Damron's)]]
File:50.jpg |link=50 |[[Oxyacetylene torch, large ID:50]]
File:Parts washer, Powerfist 3.5 L.jpg |link=Parts washer, 3.5 L (Powerfist) |[[Parts washer, 3.5 L (Powerfist)]]
File:Plasma cutter, Hypertherm 45.jpg |link=Plasma cutter (Hypertherm 45) |[[Plasma cutter (Hypertherm 45)]]
File:plasma_cutter.thumbnail.jpg |link=Plasma cutter, CNC (Kyle Paavola's) |[[Plasma cutter, CNC (Kyle Paavola's)]]
File:Router_Plunge_Makita.jpg |link=Router, plunge (Makita 3612BR) |[[Router, plunge (Makita 3612BR)]]
File:Plunge router (green).jpg |link=Router, green |[[Router, green]]
File:10.jpg |link=10 |[[Press (Powerfist) ID:10]]
File:NoImage.png |link=81 |[[Router table, wooden ID:81]]
File:Chop_Saw.jpg |link=Saw, compound mitre (Ryobi) |[[Saw, compound mitre (Ryobi)]]
File:Chopsaw_Metal.jpg |link=Saw, compound mitre, metal (Ryobi) |[[Saw, compound mitre, metal (Ryobi)]]
File:Reciprocating_Saw.jpg |link=Saw, sabre (Mastercraft) |[[Saw, sabre (Mastercraft)]]
File:Skil_Saw_BD.jpg |link=Saw, handheld circular, 7 1/4" (Black & Decker) |[[Saw, handheld circular, 7 1/4" (Black & Decker)]]
File:Skil_Saw_Red.jpg |link=Saw, handheld circular (Skil) |[[Saw, handheld circular (Skil)]]
File:Electric screwdriver, cordless, B&D FireStorm (small).jpg |link=Screwdriver, electric, cordless (Black & Decker FireStorm, small) |[[Screwdriver, electric, cordless (Black & Decker FireStorm, small)]]
File:119.jpg |link=119 |[[Sewing machine, industrial (Relsew) ID:119]]
File:Shaper, metal.jpg |link=Shaper, 7" |[[Shaper, 7"]]
File:Taps_Grey.jpg |link=Tap & die set (Mastercraft) |[[Tap & die set (Mastercraft)]]
File:OxyAce_Mini.jpg |link=Torch, oxygen–acetylene, mini |[[Torch, oxygen–acetylene, mini]]
File:Vice_Medium.jpg |link=Vise, medium (Irwin) |[[Vise, medium (Irwin)]]
File:Welder_MIG.jpg |link=Welder, MIG (Lincoln Weld-Pak 100) |[[Welder, MIG (Lincoln Weld-Pak 100)]]
File:55.jpg |link=55 |[[Welder, stick, orange (Acklands 225 AC Sizzler) ID:55]]
File:109.jpg |link=109 |[[Welder, Stick, AC/DC (Miller Thunderbolt XL) ID:109]]
</gallery>

* 3D Printer (Ultimaker) - Brian Queen - ?? - Working okay, needs heated bed - ??
* Compressor (small/black), Air Tank, Controls & Air Dryer - circuithacker & 19200baud - Loaned While Members - Needs plumbing and wiring fix
* Sewing Machine (Singer 730) - ?? - ?? - Marginally Working - ??
* Sewing Machine (EuroPro) - ?? - ?? - Needs Fixing - ??
* Sewing Machine (Kenmore) - Gina N - Donated to Protospace - Working - Open To Members

139

2019-10-19T18:10:49Z

Cjs: created wiki id redirect

#REDIRECT [[Sander, random orbital ID:139]]

Sander, random orbital ID:139

2019-10-19T18:09:47Z

Cjs: added tool page

{{Equipment page
| toolname = Random orbital sander
| model = Ridgid R2601
| serial =
| owner =
| loanstatus =
| arrived = 2019-10-17
| location = Woodworking shop
| status = Working
| permission =
| certification =
| id = 139
}}

==Documentation==

* [https://cdn2.ridgid.com/resources/media?key=e83ed4f1-906d-469f-9584-150692f6d3a0&languageCode=en&countryCode=US&type=document Manual]
* [https://cdn2.ridgid.com/resources/media?key=9d3f043d-1a72-4ded-9601-c8c36349d23b&languageCode=en&countryCode=US&type=document Parts list]

Template:Equipment page removed

2019-10-19T18:06:00Z

Cjs: updated tools we have backlink

<includeonly>
[[Tools we have|← Back to tools we have]]

{{{itemphoto|[[File:{{{id}}}.jpg|350px|thumb|right|{{{caption|}}}]]}}}

{| style="background-color: #FF3333; border: 2px solid #555555; border-radius: 10px; padding: 10px; margin: 0 0 20px;"
| 
| style="padding-left:10px;" | '''This article is about a tool that is no longer at Protospace.''' Further information can be found below.
|}

* '''Type:''' {{{toolname}}}
* '''Make/Model:''' {{{model}}}
* '''Serial Number:''' {{{serial}}}
* '''Original Owner:''' {{{owner}}}
* '''Removed by:''' {{{removedby}}}
* '''Removal Reason:''' {{{removalreason}}}
* '''Loan Status:''' {{{loanstatus}}}
* '''Arrival Date:''' {{{arrived}}}
* '''Removal Date:''' {{{removaldate}}}
* '''Replacements:''' {{{replacements}}}
* '''Location:''' {{{location}}}
* '''Functional Status:''' {{{status}}}
* '''Usage Permissions:''' {{{permission}}}
* '''Certification:''' {{{certification}}}
* '''Wiki ID:''' [[{{{id}}}]]

[[Category:Tools no longer at Protospace]]</includeonly>

<noinclude>This template is intended to be used on pages about tools that are no longer at Protospace. (Pages for tools that are currently at Protospace should use [[Template:Equipment page]].) Follow the procedure outlined on the [[Adding New Tools Procedure]] page to add a page for a new tool.

The template's syntax is as follows. Everything below the fifth line (<code>replacements</code>) is the same as Template:Equipment page.
<pre><nowiki>
{{Equipment page removed
| removedby = Name of person who removed the tool
| removalreason = Reason the tool was removed
| removaldate = Date the tool was removed
| replacements = Any tool(s) that replace this tool. Please link to their pages. "None" if there is no replacement yet.
| toolname = Type of tool
| model = Make and/or model of tool
| serial = Serial number (if applicable)
| owner = Original owner/donor (or buyers if the tool was group-bought)
| loanstatus = Short-term loan, semi-permanent loan, or donated to Protospace
| arrived = When the equipment showed up
| location = Where one can find the tool/where it belongs
| status = "Functional"/"Working", "Broken"/"Needs fixing", etc.
(If it needs fixing, please elaborate later in the article.)
| permission = "Private", "Ask owner first"," Open to full members",
"Open to members & friends", "Open to all", or something else as appropriate
| certification = "Self-taught" or "Certification required" as appropriate
| id = Unique ID number redirecting to the tool's page
| caption = (optional) A caption for the image, if you're not using manual image markup via itemphoto
| itemphoto = (optional) A file link to a photo of the tool.
Standardly [[File:filename.jpg|350px|thumb|right|<caption goes here>]] with the appropriate filename substituted.
(You will need to upload the file if it doesn't already exist on the wiki.)
}}
</nowiki></pre>

It generates the following on the tool page:
<div style="border: 1px solid black;">
[[Tools_We_Have|← Back to tools gallery]]

{{{itemphoto|[[File:NoImage.png|350px|thumb|right|]]}}}

{| style="background-color: #FF3333; border: 2px solid #555555; border-radius: 10px; padding: 10px; margin: 0 0 20px;"
| 
| style="padding-left:10px;" | '''This article is about a tool that is no longer at Protospace.''' Further information can be found below.
|}

* '''Type:''' {{{toolname}}}
* '''Make/Model:''' {{{model}}}
* '''Serial Number:''' {{{serial}}}
* '''Original Owner:''' {{{owner}}}
* '''Removed by:''' {{{removedby}}}
* '''Removal Reason:''' {{{removalreason}}}
* '''Loan Status:''' {{{loanstatus}}}
* '''Arrival Date:''' {{{arrived}}}
* '''Removal Date:''' {{{removaldate}}}
* '''Replacements:''' {{{replacements}}}
* '''Location:''' {{{location}}}
* '''Functional Status:''' {{{status}}}
* '''Usage Permissions:''' {{{permission}}}
* '''Certification:''' {{{certification}}}
* '''Wiki ID:''' [[{{{id}}}]]
</div>
It also adds the page to [[:Category:Tools no longer at Protospace]], but not [[:Category:Tools]]. (The former is a subcategory of the latter, so you can still find removed tools by browsing the category tree.)
</noinclude>

138

2019-10-19T18:03:57Z

Cjs: created wiki id redirect

#REDIRECT [[Sander, random orbital ID:138]]

Sander, random orbital ID:138

2019-10-19T18:03:06Z

Cjs: added tool page

{{Equipment page
| toolname = Random orbital sander
| model = Ridgid R2601
| serial =
| owner =
| loanstatus =
| arrived = 2019-10-17
| location = Woodworking shop
| status = Working
| permission =
| certification =
| id = 138
}}

==Documentation==

* [https://cdn2.ridgid.com/resources/media?key=e83ed4f1-906d-469f-9584-150692f6d3a0&languageCode=en&countryCode=US&type=document Manual]
* [https://cdn2.ridgid.com/resources/media?key=9d3f043d-1a72-4ded-9601-c8c36349d23b&languageCode=en&countryCode=US&type=document Parts list]

Sander, random orbital (Skil) ID:87

2019-10-19T17:38:40Z

Cjs: marked as removed

{{Equipment page removed
| toolname = Random orbital sander
| model = Skil 7492
| serial =
| owner =
| loanstatus =
| arrived = Before 2014-10-30
| location = Woodworking shop
| status =
| permission =
| certification =
| id = 87
| removedby =
| removalreason =
| removaldate = Before 2019-10-19
| replacements =
}}

==Documentation==

[https://images.homedepot-static.com/catalog/pdfImages/47/47462ce0-58ab-41d1-ae0c-04ab7d72f876.pdf Manual]

Event calendar

2019-10-17T15:10:37Z

Cjs: added new member orientation on 2019-10-25

==October 2019==

{{calendar legend}}

{| class="wikitable" style="width:100%;"
! style="min-width:150px; width:14.2857%;" | Sunday
! style="min-width:150px; width:14.2857%;" | Monday
! style="min-width:150px; width:14.2857%;" | Tuesday
! style="min-width:150px; width:14.2857%;" | Wednesday
! style="min-width:150px; width:14.2857%;" | Thursday
! style="min-width:150px; width:14.2857%;" | Friday
! style="min-width:150px; width:14.2857%;" | Saturday
|- style="height:100px; vertical-align:top;"
|
|
| '''1'''
{{event open house|19:00|Meet & Geek}}
| '''2'''
| '''3'''
| '''4'''
{{event training|17:30|[https://my.protospace.ca/school/classdetails/13449 Laser Cutting and Engraving]}}
{{event training|19:30|[https://my.protospace.ca/school/classdetails/13444 New Member Orientation]}}
| '''5'''
{{event training|09:00|[https://my.protospace.ca/school/classdetails/13397 Manual Mill & Advanced Lathe]}}
|- style="height:100px; vertical-align:top;"
| '''6'''
| '''7'''
| '''8'''
{{event open house|19:00|Meet & Geek}}
| '''9'''
{{event training|19:00|[https://my.protospace.ca/school/classdetails/13450 Trotec Course]}}
| '''10'''
| '''11'''
| '''12'''
|- style="height:100px; vertical-align:top;"
| '''13'''
{{event training|14:30|[https://my.protospace.ca/school/classdetails/13445 New Member Orientation]}}
| '''14'''
| '''15'''
{{event open house|19:00|Meet & Geek}}
| '''16'''
{{event meeting|19:03|[https://groups.google.com/forum/#!topic/protospace-administration/otn9b-GwauA Members' Meeting]}}
| '''17'''
{{event training|18:00|[https://my.protospace.ca/school/classdetails/13451 Woodworking 1]}}
{{event training|20:00|[https://my.protospace.ca/school/classdetails/13452 Woodworking 2]}}
| '''18'''
| '''19'''
{{event clean|10:00|Monthly Clean}}
|- style="height:100px; vertical-align:top;"
| '''20'''
| '''21'''
| '''22'''
{{event open house|19:00|Meet & Geek}}
| '''23'''
| '''24'''
| '''25'''
{{event training|19:30|[https://my.protospace.ca/school/classdetails/13453 New Member Orientation]}}
| '''26'''
|- style="height:100px; vertical-align:top;"
| '''27'''
| '''28'''
| '''29'''
{{event open house|19:00|Meet & Geek}}
| '''30'''
| '''31'''
|
|
|}

==November 2019==

{{calendar legend}}

{| class="wikitable" style="width:100%;"
! style="min-width:150px; width:14.2857%;" | Sunday
! style="min-width:150px; width:14.2857%;" | Monday
! style="min-width:150px; width:14.2857%;" | Tuesday
! style="min-width:150px; width:14.2857%;" | Wednesday
! style="min-width:150px; width:14.2857%;" | Thursday
! style="min-width:150px; width:14.2857%;" | Friday
! style="min-width:150px; width:14.2857%;" | Saturday
|- style="height:100px; vertical-align:top;"
|
|
|
|
|
| '''1'''
| '''2'''
{{event member|--:--|[https://groups.google.com/forum/#!topic/protospace-discuss/XZXIiu2USoM Extra Life LAN Party]}}
|- style="height:100px; vertical-align:top;"
| '''3'''
| '''4'''
| '''5'''
{{event open house|19:00|Meet & Geek}}
| '''6'''
| '''7'''
| '''8'''
| '''9'''
|- style="height:100px; vertical-align:top;"
| '''10'''
| '''11'''
| '''12'''
{{event open house|19:00|Meet & Geek}}
| '''13'''
| '''14'''
| '''15'''
| '''16'''
{{event clean|10:00|Monthly Clean}}
|- style="height:100px; vertical-align:top;"
| '''17'''
| '''18'''
| '''19'''
{{event open house|19:00|Meet & Geek}}
| '''20'''
| '''21'''
{{event meeting|19:03|Members' Meeting}}
| '''22'''
| '''23'''
|- style="height:100px; vertical-align:top;"
| '''24'''
| '''25'''
| '''26'''
{{event open house|19:00|Meet & Geek}}
| '''27'''
| '''28'''
| '''29'''
| '''30'''
{{event training|09:00|[https://my.protospace.ca/school/classdetails/13395 Metal Cutting & Manual Lathe]}}
|}

==December 2019==

{{calendar legend}}

{| class="wikitable" style="width:100%;"
! style="min-width:150px; width:14.2857%;" | Sunday
! style="min-width:150px; width:14.2857%;" | Monday
! style="min-width:150px; width:14.2857%;" | Tuesday
! style="min-width:150px; width:14.2857%;" | Wednesday
! style="min-width:150px; width:14.2857%;" | Thursday
! style="min-width:150px; width:14.2857%;" | Friday
! style="min-width:150px; width:14.2857%;" | Saturday
|- style="height:100px; vertical-align:top;"
| '''1'''
| '''2'''
| '''3'''
{{event open house|19:00|Meet & Geek}}
| '''4'''
| '''5'''
| '''6'''
| '''7'''
|- style="height:100px; vertical-align:top;"
| '''8'''
| '''9'''
| '''10'''
{{event open house|19:00|Meet & Geek}}
| '''11'''
| '''12'''
| '''13'''
| '''14'''
{{event training|09:00|[https://my.protospace.ca/school/classdetails/13398 Manual Mill & Advanced Lathe]}}
|- style="height:100px; vertical-align:top;"
| '''15'''
| '''16'''
| '''17'''
{{event open house|19:00|Meet & Geek}}
| '''18'''
{{event meeting|19:03|Members' Meeting}}
| '''19'''
| '''20'''
| '''21'''
{{event clean|10:00|Monthly Clean}}
|- style="height:100px; vertical-align:top;"
| '''22'''
| '''23'''
| '''24'''
| '''25'''
| '''26'''
| '''27'''
| '''28'''
|- style="height:100px; vertical-align:top;"
| '''29'''
| '''30'''
| '''31'''
|
|
|
|
|}

==January 2020==

{{calendar legend}}

{| class="wikitable" style="width:100%;"
! style="min-width:150px; width:14.2857%;" | Sunday
! style="min-width:150px; width:14.2857%;" | Monday
! style="min-width:150px; width:14.2857%;" | Tuesday
! style="min-width:150px; width:14.2857%;" | Wednesday
! style="min-width:150px; width:14.2857%;" | Thursday
! style="min-width:150px; width:14.2857%;" | Friday
! style="min-width:150px; width:14.2857%;" | Saturday
|- style="height:100px; vertical-align:top;"
|
|
|
| '''1'''
| '''2'''
| '''3'''
| '''4'''
|- style="height:100px; vertical-align:top;"
| '''5'''
| '''6'''
| '''7'''
{{event open house|19:00|Meet & Geek}}
| '''8'''
| '''9'''
| '''10'''
| '''11'''
|- style="height:100px; vertical-align:top;"
| '''12'''
| '''13'''
| '''14'''
{{event open house|19:00|Meet & Geek}}
| '''15'''
| '''16'''
{{event meeting|19:03|Members' Meeting}}
| '''17'''
| '''18'''
{{event clean|10:00|Monthly Clean}}
|- style="height:100px; vertical-align:top;"
| '''19'''
| '''20'''
| '''21'''
{{event open house|19:00|Meet & Geek}}
| '''22'''
| '''23'''
| '''24'''
| '''25'''
|- style="height:100px; vertical-align:top;"
| '''26'''
| '''27'''
| '''28'''
{{event open house|19:00|Meet & Geek}}
| '''29'''
| '''30'''
| '''31'''
|
|}

[[Category:Calendar]]

Event calendar

2019-10-17T15:05:52Z

Cjs: added link to october members' meeting agenda

==October 2019==

{{calendar legend}}

{| class="wikitable" style="width:100%;"
! style="min-width:150px; width:14.2857%;" | Sunday
! style="min-width:150px; width:14.2857%;" | Monday
! style="min-width:150px; width:14.2857%;" | Tuesday
! style="min-width:150px; width:14.2857%;" | Wednesday
! style="min-width:150px; width:14.2857%;" | Thursday
! style="min-width:150px; width:14.2857%;" | Friday
! style="min-width:150px; width:14.2857%;" | Saturday
|- style="height:100px; vertical-align:top;"
|
|
| '''1'''
{{event open house|19:00|Meet & Geek}}
| '''2'''
| '''3'''
| '''4'''
{{event training|17:30|[https://my.protospace.ca/school/classdetails/13449 Laser Cutting and Engraving]}}
{{event training|19:30|[https://my.protospace.ca/school/classdetails/13444 New Member Orientation]}}
| '''5'''
{{event training|09:00|[https://my.protospace.ca/school/classdetails/13397 Manual Mill & Advanced Lathe]}}
|- style="height:100px; vertical-align:top;"
| '''6'''
| '''7'''
| '''8'''
{{event open house|19:00|Meet & Geek}}
| '''9'''
{{event training|19:00|[https://my.protospace.ca/school/classdetails/13450 Trotec Course]}}
| '''10'''
| '''11'''
| '''12'''
|- style="height:100px; vertical-align:top;"
| '''13'''
{{event training|14:30|[https://my.protospace.ca/school/classdetails/13445 New Member Orientation]}}
| '''14'''
| '''15'''
{{event open house|19:00|Meet & Geek}}
| '''16'''
{{event meeting|19:03|[https://groups.google.com/forum/#!topic/protospace-administration/otn9b-GwauA Members' Meeting]}}
| '''17'''
{{event training|18:00|[https://my.protospace.ca/school/classdetails/13451 Woodworking 1]}}
{{event training|20:00|[https://my.protospace.ca/school/classdetails/13452 Woodworking 2]}}
| '''18'''
| '''19'''
{{event clean|10:00|Monthly Clean}}
|- style="height:100px; vertical-align:top;"
| '''20'''
| '''21'''
| '''22'''
{{event open house|19:00|Meet & Geek}}
| '''23'''
| '''24'''
| '''25'''
| '''26'''
|- style="height:100px; vertical-align:top;"
| '''27'''
| '''28'''
| '''29'''
{{event open house|19:00|Meet & Geek}}
| '''30'''
| '''31'''
|
|
|}

==November 2019==

{{calendar legend}}

{| class="wikitable" style="width:100%;"
! style="min-width:150px; width:14.2857%;" | Sunday
! style="min-width:150px; width:14.2857%;" | Monday
! style="min-width:150px; width:14.2857%;" | Tuesday
! style="min-width:150px; width:14.2857%;" | Wednesday
! style="min-width:150px; width:14.2857%;" | Thursday
! style="min-width:150px; width:14.2857%;" | Friday
! style="min-width:150px; width:14.2857%;" | Saturday
|- style="height:100px; vertical-align:top;"
|
|
|
|
|
| '''1'''
| '''2'''
{{event member|--:--|[https://groups.google.com/forum/#!topic/protospace-discuss/XZXIiu2USoM Extra Life LAN Party]}}
|- style="height:100px; vertical-align:top;"
| '''3'''
| '''4'''
| '''5'''
{{event open house|19:00|Meet & Geek}}
| '''6'''
| '''7'''
| '''8'''
| '''9'''
|- style="height:100px; vertical-align:top;"
| '''10'''
| '''11'''
| '''12'''
{{event open house|19:00|Meet & Geek}}
| '''13'''
| '''14'''
| '''15'''
| '''16'''
{{event clean|10:00|Monthly Clean}}
|- style="height:100px; vertical-align:top;"
| '''17'''
| '''18'''
| '''19'''
{{event open house|19:00|Meet & Geek}}
| '''20'''
| '''21'''
{{event meeting|19:03|Members' Meeting}}
| '''22'''
| '''23'''
|- style="height:100px; vertical-align:top;"
| '''24'''
| '''25'''
| '''26'''
{{event open house|19:00|Meet & Geek}}
| '''27'''
| '''28'''
| '''29'''
| '''30'''
{{event training|09:00|[https://my.protospace.ca/school/classdetails/13395 Metal Cutting & Manual Lathe]}}
|}

==December 2019==

{{calendar legend}}

{| class="wikitable" style="width:100%;"
! style="min-width:150px; width:14.2857%;" | Sunday
! style="min-width:150px; width:14.2857%;" | Monday
! style="min-width:150px; width:14.2857%;" | Tuesday
! style="min-width:150px; width:14.2857%;" | Wednesday
! style="min-width:150px; width:14.2857%;" | Thursday
! style="min-width:150px; width:14.2857%;" | Friday
! style="min-width:150px; width:14.2857%;" | Saturday
|- style="height:100px; vertical-align:top;"
| '''1'''
| '''2'''
| '''3'''
{{event open house|19:00|Meet & Geek}}
| '''4'''
| '''5'''
| '''6'''
| '''7'''
|- style="height:100px; vertical-align:top;"
| '''8'''
| '''9'''
| '''10'''
{{event open house|19:00|Meet & Geek}}
| '''11'''
| '''12'''
| '''13'''
| '''14'''
{{event training|09:00|[https://my.protospace.ca/school/classdetails/13398 Manual Mill & Advanced Lathe]}}
|- style="height:100px; vertical-align:top;"
| '''15'''
| '''16'''
| '''17'''
{{event open house|19:00|Meet & Geek}}
| '''18'''
{{event meeting|19:03|Members' Meeting}}
| '''19'''
| '''20'''
| '''21'''
{{event clean|10:00|Monthly Clean}}
|- style="height:100px; vertical-align:top;"
| '''22'''
| '''23'''
| '''24'''
| '''25'''
| '''26'''
| '''27'''
| '''28'''
|- style="height:100px; vertical-align:top;"
| '''29'''
| '''30'''
| '''31'''
|
|
|
|
|}

==January 2020==

{{calendar legend}}

{| class="wikitable" style="width:100%;"
! style="min-width:150px; width:14.2857%;" | Sunday
! style="min-width:150px; width:14.2857%;" | Monday
! style="min-width:150px; width:14.2857%;" | Tuesday
! style="min-width:150px; width:14.2857%;" | Wednesday
! style="min-width:150px; width:14.2857%;" | Thursday
! style="min-width:150px; width:14.2857%;" | Friday
! style="min-width:150px; width:14.2857%;" | Saturday
|- style="height:100px; vertical-align:top;"
|
|
|
| '''1'''
| '''2'''
| '''3'''
| '''4'''
|- style="height:100px; vertical-align:top;"
| '''5'''
| '''6'''
| '''7'''
{{event open house|19:00|Meet & Geek}}
| '''8'''
| '''9'''
| '''10'''
| '''11'''
|- style="height:100px; vertical-align:top;"
| '''12'''
| '''13'''
| '''14'''
{{event open house|19:00|Meet & Geek}}
| '''15'''
| '''16'''
{{event meeting|19:03|Members' Meeting}}
| '''17'''
| '''18'''
{{event clean|10:00|Monthly Clean}}
|- style="height:100px; vertical-align:top;"
| '''19'''
| '''20'''
| '''21'''
{{event open house|19:00|Meet & Geek}}
| '''22'''
| '''23'''
| '''24'''
| '''25'''
|- style="height:100px; vertical-align:top;"
| '''26'''
| '''27'''
| '''28'''
{{event open house|19:00|Meet & Geek}}
| '''29'''
| '''30'''
| '''31'''
|
|}

[[Category:Calendar]]

Sander, random orbital (Skil) ID:87

2019-10-15T13:16:18Z

Cjs: found a proper pdf version of the manual

{{Equipment page
| toolname = Random orbital sander
| model = Skil 7492
| serial =
| owner =
| loanstatus =
| arrived = Before 2014-10-30
| location = Woodworking shop
| status = [https://groups.google.com/forum/#!msg/protospace-administration/hpmb4wFsMVo/EwQOnBSSBgAJ Broken]
| permission =
| certification =
| id = 87
}}

==Documentation==

[https://images.homedepot-static.com/catalog/pdfImages/47/47462ce0-58ab-41d1-ae0c-04ab7d72f876.pdf Manual]

Tools we have

2019-10-15T13:06:42Z

Cjs: updated links, fixed heading capitalization, changed old equipment removed heading to use more natural english

'''Adding a new tool to the wiki?''' Follow this [[Adding New Tools Procedure|procedure]].

We can always use new tools! Please feel free to [[List of links and email addresses|contact Protospace]] to donate, arrange for pickup, or drop them off in person.

If you are interested in knowing what kind of tools we are looking for, we also have a member-managed [[Tools we want|tool wishlist]], but your best bet on figuring out if we want something is simply asking on our [https://groups.google.com/forum/#!forum/protospace-discuss discussion group].

We also have [[:Category:Tools|an alphabetically ordered and categorized tool catalog]].

{{Warning|Treat the tools at Protospace with respect! Clean, functioning tools make for a happy crowd.}}

==Rapid prototyping tools==
:''Comparisons: [[our 3D printers]], [[our laser cutters]]''
<gallery>

File:2.jpg |link=2 |[[3D printer, FFF (ORD Bot Hadron) ID:2]]
File:125.jpg |link=125 |[[3D printer, FFF (ORD Bot Hadron) ID:125]]
File:126.jpg |link=126 |[[3D printer, FFF (ORD Bot Hadron) ID:126]]
File:3.jpg |link=3 |[[3D printer, FFF (PrusaMD) ID:3]]
File:4.jpg |link=4 |[[3D printer, FFF, delta (Kossel) ID:4]]
File:6.jpg |link=6 |[[Laser cutter, large (Rabbit Laser RL-80-1290) ID:6]]
File:107.jpg |link=107 |[[Laser cutter (Trotec Speedy 300) ID:107]]
</gallery>

==Automotive tools==

<gallery>

File:8.jpg |link=8 |[[Floor jack, blue ID:8]]
File:9.jpg |link=9 |[[Trolley jack and axle stand kit (Certified) ID:9]]
File:11.jpg |link=11 |[[Socket set ID:11]]
</gallery>

==Chemistry==

<gallery>

File:12.jpg |link=12 |[[Oxygen concentrator (OGSI OG-15) ID:12]]
</gallery>

==Electronics tools==

<gallery>

File:13.jpg |link=13 |[[Counter (Fluke 1910A Multi-Counter) ID:13]]
File:14.jpg |link=14 |[[Counter (Lafayette 54517) ID:14]]
File:15.jpg |link=15 |[[Decade box, capacitance (Servomex Controls Decade Capacitor Type B) ID:15]]
File:16.jpg |link=16 |[[Function generator (John's) ID:16]]
File:18.jpg |link=18 |[[Heat gun (Powerfist) ID:18]]
File:19.jpg |link=19 |[[Logic analyzer (HP 1631D) ID:19]]
File:20.jpg |link=20 |[[Multimeter, digital (Pro.Point 8344665) ID:20]]
File:21.jpg |link=21 |[[Oscilloscope (Brunelle 2925) ID:21]]
File:22.jpg |link=22 |[[Oscilloscope (Kikusui COS 5060) ID:22]]
File:23.jpg |link=23 |[[Oscilloscope (Tektronix 2225) ID:23]]
File:24.jpg |link=24 |[[Oscilloscope (Tektronix 2465A) ID:24]]
File:25.jpg |link=25 |[[Oscilloscope, PC (Syscomp DSO-101) ID:25]]
File:26.jpg |link=26 |[[Power supply, bench (GQ Electronics GQ-A305D) ID:26]]
File:27.jpg |link=27 |[[Power supply, bench, 500 V (Heathkit PS-3) ID:27]]
File:28.jpg |link=28 |[[Power supply, bench, 2-channel (TENMA 72-7245) ID:28]]
File:29.jpg |link=29 |[[Reflow oven (Hamilton Beach) ID:29]]
File:30.jpg |link=30 |[[Hot-air rework station (GQ Electronics 5200) ID:30]]
File:31.jpg |link=31 |[[Solder fume extractor (Metcal) ID:31]]
File:32.jpg |link=32 |[[UV photomasker (Dan's) ID:32]]
File:33.jpg |link=33 |[[Waveform generator (Syscomp WGM-101) ID:33]]
File:34.jpg |link=34 |[[Waveform monitor (Tektronix 1730) ID:34]]
</gallery>

==Metalworking tools==

<gallery>

File:35.jpg |link=35 |[[Angle grinder (DeWalt) ID:35]]
File:36.jpg |link=36 |[[Anvil (Chris's) ID:36]]
File:37.jpg |link=37 |[[Bandsaw, metal, horizontal ID:37]]
File:38.jpg |link=38 |[[Bench grinder (Baldor) ID:38]]
File:39.jpg |link=39 |[[Bench grinder (Powerfist) ID:39]]
File:40.jpg |link=40 |[[Bench grinder (Trademaster PR14210) ID:40]]
File:41.jpg |link=41 |[[Brake, box and pan, 24" (Magnum) ID:41]]
File:42.jpg |link=42 |[[Drill press (Mastercraft) ID:42]]
File:44.jpg |link=44 |[[Forge, propane, pass-through ID:44]]
File:45.jpg |link=45 |[[Foundry, propane ID:45]]
File:121.jpg |link=121 |[[Hydraulic press, 50-ton, electric ID:121]]
File:46.jpg |link=46 |[[Lathe, metal (Challenger 1660G) ID:46]]
File:47.jpg |link=47 |[[Lathe, miniature (Taig Microlathe II) ID:47]]
File:53.jpg |link=53 |[[Metal shear (Magnum) ID:53]]
File:48.jpg |link=48 |[[Milling machine (ACRA AM4V) ID:48]]
File:49.jpg |link=49 |[[Milling machine, CNC (Tormach PCNC 1100) ID:49]]
File:51.jpg |link=51 |[[Plasma cutter, huge (Powercut 1500) ID:51]]
File:52.jpg |link=52 |[[Plasma cutter, small (Miller Spectrum 375) ID:52]]
File:54.jpg |link=54 |[[Vise, giant ID:54]]
File:56.jpg |link=56 |[[Welding magnets ID:56]]
File:96.jpg |link=96 |[[Spot welder ID:96]]
</gallery>

==Woodworking and plasticworking tools==

<gallery>

File:57.jpg |link=57 |[[Bandsaw, green ID:57]]
File:105.jpg |link=105 |[[Bandsaw (Shop Fox W1706) ID:105]]
File:58.jpg |link=58 |[[Belt and disc sander (CWD 15-315) ID:58]]
File:59.jpg |link=59 |[[Clamps ID:59]]
File:60.jpg |link=60 |[[Drill, hand, corded (Black & Decker) ID:60]]
File:61.jpg |link=61 |[[Drill, hand, corded, black (Jobmate) ID:61]]
File:62.jpg |link=62 |[[Drill, hand, corded, dark blue (Ryobi) ID:62]]
File:63.jpg |link=63 |[[Drill, hand, cordless (Black & Decker) ID:63]]
File:64.jpg |link=64 |[[Drill, hand, cordless (Black & Decker FireStorm) ID:64]]
File:65.jpg |link=65 |[[Drill, hand, cordless, with detachable chuck (Black & Decker FireStorm) ID:65]]
File:66.jpg |link=66 |[[Drill, hand, cordless, with quick connector (Black & Decker FireStorm) ID:66]]
File:67.jpg |link=67 |[[Drill, hand, cordless (DeWalt) ID:67]]
File:68.jpg |link=68 |[[Drill, hand, corded (Makita DP3720) ID:68]]
File:69.jpg |link=69 |[[Drill press, 8" (Jobmate) ID:69]]
File:70.jpg |link=70 |[[Jigsaw, corded (Black & Decker) ID:70]]
File:71.jpg |link=71 |[[Jigsaw, cordless (Black & Decker FireStorm) ID:71]]
File:72.jpg |link=72 |[[Jigsaw (Skil) ID:72]]
File:73.jpg |link=73 |[[Jointer, grey ID:73]]
File:74.jpg |link=74 |[[Miter saw, compound, sliding (Hitachi) ID:74]]
File:75.jpg |link=75 |[[Nailer, pneumatic, 2-in-1 ID:75]]
File:108.jpg |link=108 |[[Planer (Jet JPM-13CS) ID:108]]
File:76.jpg |link=76 |[[Plate joiner (Porter Cable 557) ID:76]]
File:77.jpg |link=77 |[[Radial arm saw (Craftsman) ID:77]]
File:78.jpg |link=78 |[[Rotary tool, corded (Mastercraft) ID:78]]
File:79.jpg |link=79 |[[Rotary tool, cordless (Dremel) ID:79]]
File:80.jpg |link=80 |[[Router table (Craftsman) ID:80]]
File:124.jpg |link=124 |[[Router table (Jeff's) ID:124]]
File:82.jpg |link=82 |[[Sabre saw (Black & Decker FireStorm) ID:82]]
File:83.jpg |link=83 |[[Sander, belt (Makita 9402) ID:83]]
File:84.jpg |link=84 |[[Sander, belt/disc (Dremel 730) ID:84]]
File:85.jpg |link=85 |[[Sander, detail (Ryobi) ID:85]]
File:106.jpg |link=106 |[[Sander, drum (General International 15-250 M1) ID:106]]
File:86.jpg |link=86 |[[Sander, hand, cordless (Black & Decker FireStorm) ID:86]]
File:87.jpg |link=87 |[[Sander, random orbital (Skil) ID:87]]
File:88.jpg |link=88 |[[Sander, straight-line/orbital (Black & Decker Deluxe) ID:88]]
File:89.jpg |link=89 |[[Scroll saw (Dremel) ID:89]]
File:90.jpg |link=90 |[[Scroll saw (Mastercraft 55-6714-6) ID:90]]
File:91.jpg |link=91 |[[Table saw (Craftex CX201) ID:91]]
File:92.jpg |link=92 |[[Thickness planer (Ryobi AP1301) ID:92]]
File:93.jpg |link=93 |[[Vacuum, sawdust (Craftex CX404) ID:93]]
File:94.jpg |link=94 |[[Vise, wood ID:94]]
File:95.jpg |link=95 |[[Vise, wood (Travis's) ID:95]]
</gallery>

==Measuring and inspection tools==
See also the [[#Electronics Tools|Electronics Tools section on this page]] for electrical and electronic measurement and test equipment.
<gallery>

File:97.jpg |link=97 |[[Inspection mirror, 18" gooseneck ID:97]]
File:98.jpg |link=98 |[[Magnifier lamp, large, with lid ID:98]]
File:99.jpg |link=99 |[[Magnifier lamp, large, without lid ID:99]]
File:100.jpg |link=100 |[[Magnifier lamp, small, with lid ID:100]]
File:101.jpg |link=101 |[[Measuring tapes ID:101]]
File:102.jpg |link=102 |[[Rulers ID:102]]
File:103.jpg |link=103 |[[Squares ID:103]]
File:104.jpg |link=104 |[[Thermometer, infrared (H64) ID:104]]
</gallery>

==Miscellaneous tools==

<gallery>

File:110.jpg |link=110 |[[Air compressor, 60-gallon (Campbell Hausfeld) ID:110]]
File:111.jpg |link=111 |[[Air compressor, 80-gallon (MAXair Premium) ID:111]]
File:112.jpg |link=112 |[[Air compressor, silent ID:112]]
File:113.jpg |link=113 |[[Air pump, foot-operated (Bell FootPumper) ID:113]]
File:115.jpg |link=115 |[[Engraver ID:115]]
File:116.jpg |link=116 |[[Hand truck, red ID:116]]
File:117.jpg |link=117 |[[Hot-wire foam cutter, handheld, 4.5"×5.5" (Woodland Scenics) ID:117]]
File:118.jpg |link=118 |[[Hot-wire foam cutter, tabletop, 14"×12" ID:118]]
File:127.jpg |link=127 |[[Oil can, blue ID:127]]
File:128.jpg |link=128 |[[Painting tools ID:128]]
File:129.jpg |link=129 |[[Pinball machine (Williams Road Kings) ID:129]]
File:130.jpg |link=130 |[[Sandblasting cabinet, floor, blue (Powerfist) ID:130]]
File:131.jpg |link=131 |[[Screwdriver magnetizer/demagnetizer (Wiha 40010) ID:131]]
File:120.jpg |link=120 |[[Sewing machine, domestic (Singer 1802) ID:120]]
File:132.jpg |link=132 |[[Shop vacuum, orange ID:132]]
File:133.jpg |link=133 |[[Staple gun (Arrow T-18) ID:133]]
File:122.jpg |link=122 |[[Tile work surfaces ID:122]]
File:123.jpg |link=123 |[[Tile work surfaces ID:123]]
File:134.jpg |link=134 |[[Vacuum cart ID:134]]
File:136.jpg |link=136 |[[Vacuum cleaner, portable ID:136]]
File:135.jpg |link=135 |[[Vacuum pump ID:135]]
File:137.jpg |link=137 |[[Vacuum pump (Edwards SpeediVac ED200) ID:137]]
</gallery>

* Vacuum Former (under construction Aug 2017)

==Removed equipment==

In case they are brought back, or, so people who could have sworn we had a tool know it was removed.

<gallery>

File:3DP_RapMan.jpg |link=3D printer (3D Systems RapMan) |[[3D printer (3D Systems RapMan)]]
File:3D printer, Come3D!.jpg |link=3D printer (Come3D!) |[[3D printer (Come3D!)]]
File:3DP_Cupcake.jpg |link=3D printer (MakerBot Cupcake) |[[3D printer (MakerBot Cupcake)]]
File:1.jpg |link=1 |[[3D printer, FFF (IIIP) ID:1]]
File:3D printer, Nathan Ward's RepRap.jpg |link=3D printer, FFF (RepRap) |[[3D printer, FFF (RepRap)]]
File:3D printer, Yin's Wanhao.jpg |link=3D printer, FFF (Wanhao Duplicator i3) |[[3D printer, FFF (Wanhao Duplicator i3)]]
File:InVision si2.jpg |link=3D printer, MJM (3D Systems InVision si2) |[[3D printer, MJM (3D Systems InVision si2)]]
File:5.jpg |link=5 |[[3D printer, SLA (mUVe 1) ID:5]]
File:Compressor_Dewalt.jpg |link=Air compressor, 4-gallon (DeWalt) |[[Air compressor, 4-gallon (DeWalt)]]
File:Compressor_Big.jpg |link=Air compressor, 17-gallon |[[Air compressor, 17-gallon]]
File:Reciprocating_compressor.jpg |link=Air compressor, 80-gallon (Ingersoll Rand T30) |[[Air compressor, 80-gallon (Ingersoll Rand T30)]]
File:Angle_Grinder.jpg |link=Angle grinder (Kawasaki) |[[Angle grinder (Kawasaki)]]
File:Anvil_75lb.jpg |link=Anvil |[[Anvil]]
File:Bandsaw_Horizontal.jpg |link=Bandsaw, metal, horizontal (Craftex B013N) |[[Bandsaw, metal, horizontal (Craftex B013N)]]
File:Horizontal bandsaw, old.jpg |link=Bandsaw, metal, horizontal (Pit Bull) |[[Bandsaw, metal, horizontal (Pit Bull)]]
File:Bending_Brake.jpg |link=Bending brake, 30" (Powerfist) |[[Bending brake, 30" (Powerfist)]]
File:114.jpg |link=114 |[[Bicycle tire jig ID:114]]
File:Buffer_Benchtop.jpg |link=Buffer (Clarke 2H 5AB) |[[Buffer (Clarke 2H 5AB)]]
File:Dewars.jpg |link=Dewars, 50-litre |[[Dewars, 50-litre]]
File:Drill_Dewalt.jpg |link=Drill, corded (DeWalt) |[[Drill, corded (DeWalt)]]
File:Pick_N_Place.jpg |link=Electronics assembly pick and place machine (Multitronics 2000LX) |[[Electronics assembly pick and place machine (Multitronics 2000LX)]]
File:Forge_Propane_2.jpg |link=Forge, propane (Jim's) |[[Forge, propane (Jim's)]]
File:43.jpg |link=43 |[[Forge (Travis's) ID:43]]
File:17.jpg |link=17 |[[Function generator (Krohn–Hite 5100A) ID:17]]
File:Impact_Driver.jpg |link=Impact driver (DeWalt) |[[Impact driver (DeWalt)]]
File:Work light, B&D FireStorm.jpg |link=Lamp, cordless (Black & Decker FireStorm) |[[Lamp, cordless (Black & Decker FireStorm)]]
File:7.jpg |link=7 |[[Laser cutter, small ID:7]]
File:Lathe, South Bend.jpg |link=Lathe, metal (South Bend) |[[Lathe, metal (South Bend)]]
File:Lathe, Torrent T.72-42.jpg |link=Lathe, metal (Torrent T.72-42) |[[Lathe, metal (Torrent T.72-42)]]
File:Lathe_Mill.jpg |link=Lathe–mill combination (Craftex B2229) |[[Lathe–mill combination (Craftex B2229)]]
File:Lathe_Wood_Mini.jpg |link=Lathe, wood (Haussmann) |[[Lathe, wood (Haussmann)]]
File:MaxNC10.jpg |link=Milling machine, CNC, mini (MAXNC 10) |[[Milling machine, CNC, mini (MAXNC 10)]]
File:CNC mill (Terry's).jpg |link=Milling machine, CNC (Terry's) |[[Milling machine, CNC (Terry's)]]
File:DMM, Excel DT9205A.jpg |link=Multimeter, digital (Excel DT9205A) |[[Multimeter, digital (Excel DT9205A)]]
File:DMM, Powerfist DT 9208.jpg |link=Multimeter, digital (Powerfist DT 9208A) |[[Multimeter, digital (Powerfist DT 9208A)]]
File:Audio mixing board.jpg |link=PA system (Dan Damron's) |[[PA system (Dan Damron's)]]
File:50.jpg |link=50 |[[Oxyacetylene torch, large ID:50]]
File:Parts washer, Powerfist 3.5 L.jpg |link=Parts washer, 3.5 L (Powerfist) |[[Parts washer, 3.5 L (Powerfist)]]
File:Plasma cutter, Hypertherm 45.jpg |link=Plasma cutter (Hypertherm 45) |[[Plasma cutter (Hypertherm 45)]]
File:plasma_cutter.thumbnail.jpg |link=Plasma cutter, CNC (Kyle Paavola's) |[[Plasma cutter, CNC (Kyle Paavola's)]]
File:Router_Plunge_Makita.jpg |link=Router, plunge (Makita 3612BR) |[[Router, plunge (Makita 3612BR)]]
File:Plunge router (green).jpg |link=Router, green |[[Router, green]]
File:10.jpg |link=10 |[[Press (Powerfist) ID:10]]
File:NoImage.png |link=81 |[[Router table, wooden ID:81]]
File:Chop_Saw.jpg |link=Saw, compound mitre (Ryobi) |[[Saw, compound mitre (Ryobi)]]
File:Chopsaw_Metal.jpg |link=Saw, compound mitre, metal (Ryobi) |[[Saw, compound mitre, metal (Ryobi)]]
File:Reciprocating_Saw.jpg |link=Saw, sabre (Mastercraft) |[[Saw, sabre (Mastercraft)]]
File:Skil_Saw_BD.jpg |link=Saw, handheld circular, 7 1/4" (Black & Decker) |[[Saw, handheld circular, 7 1/4" (Black & Decker)]]
File:Skil_Saw_Red.jpg |link=Saw, handheld circular (Skil) |[[Saw, handheld circular (Skil)]]
File:Electric screwdriver, cordless, B&D FireStorm (small).jpg |link=Screwdriver, electric, cordless (Black & Decker FireStorm, small) |[[Screwdriver, electric, cordless (Black & Decker FireStorm, small)]]
File:119.jpg |link=119 |[[Sewing machine, industrial (Relsew) ID:119]]
File:Shaper, metal.jpg |link=Shaper, 7" |[[Shaper, 7"]]
File:Taps_Grey.jpg |link=Tap & die set (Mastercraft) |[[Tap & die set (Mastercraft)]]
File:OxyAce_Mini.jpg |link=Torch, oxygen–acetylene, mini |[[Torch, oxygen–acetylene, mini]]
File:Vice_Medium.jpg |link=Vise, medium (Irwin) |[[Vise, medium (Irwin)]]
File:Welder_MIG.jpg |link=Welder, MIG (Lincoln Weld-Pak 100) |[[Welder, MIG (Lincoln Weld-Pak 100)]]
File:55.jpg |link=55 |[[Welder, stick, orange (Acklands 225 AC Sizzler) ID:55]]
File:109.jpg |link=109 |[[Welder, Stick, AC/DC (Miller Thunderbolt XL) ID:109]]
</gallery>

* 3D Printer (Ultimaker) - Brian Queen - ?? - Working okay, needs heated bed - ??
* Compressor (small/black), Air Tank, Controls & Air Dryer - circuithacker & 19200baud - Loaned While Members - Needs plumbing and wiring fix
* Sewing Machine (Singer 730) - ?? - ?? - Marginally Working - ??
* Sewing Machine (EuroPro) - ?? - ?? - Needs Fixing - ??
* Sewing Machine (Kenmore) - Gina N - Donated to Protospace - Working - Open To Members

Event calendar

2019-10-14T10:38:15Z

Cjs: added woodworking courses on 2019-10-17

==October 2019==

{{calendar legend}}

{| class="wikitable" style="width:100%;"
! style="min-width:150px; width:14.2857%;" | Sunday
! style="min-width:150px; width:14.2857%;" | Monday
! style="min-width:150px; width:14.2857%;" | Tuesday
! style="min-width:150px; width:14.2857%;" | Wednesday
! style="min-width:150px; width:14.2857%;" | Thursday
! style="min-width:150px; width:14.2857%;" | Friday
! style="min-width:150px; width:14.2857%;" | Saturday
|- style="height:100px; vertical-align:top;"
|
|
| '''1'''
{{event open house|19:00|Meet & Geek}}
| '''2'''
| '''3'''
| '''4'''
{{event training|17:30|[https://my.protospace.ca/school/classdetails/13449 Laser Cutting and Engraving]}}
{{event training|19:30|[https://my.protospace.ca/school/classdetails/13444 New Member Orientation]}}
| '''5'''
{{event training|09:00|[https://my.protospace.ca/school/classdetails/13397 Manual Mill & Advanced Lathe]}}
|- style="height:100px; vertical-align:top;"
| '''6'''
| '''7'''
| '''8'''
{{event open house|19:00|Meet & Geek}}
| '''9'''
{{event training|19:00|[https://my.protospace.ca/school/classdetails/13450 Trotec Course]}}
| '''10'''
| '''11'''
| '''12'''
|- style="height:100px; vertical-align:top;"
| '''13'''
{{event training|14:30|[https://my.protospace.ca/school/classdetails/13445 New Member Orientation]}}
| '''14'''
| '''15'''
{{event open house|19:00|Meet & Geek}}
| '''16'''
{{event meeting|19:03|Members' Meeting}}
| '''17'''
{{event training|18:00|[https://my.protospace.ca/school/classdetails/13451 Woodworking 1]}}
{{event training|20:00|[https://my.protospace.ca/school/classdetails/13452 Woodworking 2]}}
| '''18'''
| '''19'''
{{event clean|10:00|Monthly Clean}}
|- style="height:100px; vertical-align:top;"
| '''20'''
| '''21'''
| '''22'''
{{event open house|19:00|Meet & Geek}}
| '''23'''
| '''24'''
| '''25'''
| '''26'''
|- style="height:100px; vertical-align:top;"
| '''27'''
| '''28'''
| '''29'''
{{event open house|19:00|Meet & Geek}}
| '''30'''
| '''31'''
|
|
|}

==November 2019==

{{calendar legend}}

{| class="wikitable" style="width:100%;"
! style="min-width:150px; width:14.2857%;" | Sunday
! style="min-width:150px; width:14.2857%;" | Monday
! style="min-width:150px; width:14.2857%;" | Tuesday
! style="min-width:150px; width:14.2857%;" | Wednesday
! style="min-width:150px; width:14.2857%;" | Thursday
! style="min-width:150px; width:14.2857%;" | Friday
! style="min-width:150px; width:14.2857%;" | Saturday
|- style="height:100px; vertical-align:top;"
|
|
|
|
|
| '''1'''
| '''2'''
{{event member|--:--|[https://groups.google.com/forum/#!topic/protospace-discuss/XZXIiu2USoM Extra Life LAN Party]}}
|- style="height:100px; vertical-align:top;"
| '''3'''
| '''4'''
| '''5'''
{{event open house|19:00|Meet & Geek}}
| '''6'''
| '''7'''
| '''8'''
| '''9'''
|- style="height:100px; vertical-align:top;"
| '''10'''
| '''11'''
| '''12'''
{{event open house|19:00|Meet & Geek}}
| '''13'''
| '''14'''
| '''15'''
| '''16'''
{{event clean|10:00|Monthly Clean}}
|- style="height:100px; vertical-align:top;"
| '''17'''
| '''18'''
| '''19'''
{{event open house|19:00|Meet & Geek}}
| '''20'''
| '''21'''
{{event meeting|19:03|Members' Meeting}}
| '''22'''
| '''23'''
|- style="height:100px; vertical-align:top;"
| '''24'''
| '''25'''
| '''26'''
{{event open house|19:00|Meet & Geek}}
| '''27'''
| '''28'''
| '''29'''
| '''30'''
{{event training|09:00|[https://my.protospace.ca/school/classdetails/13395 Metal Cutting & Manual Lathe]}}
|}

==December 2019==

{{calendar legend}}

{| class="wikitable" style="width:100%;"
! style="min-width:150px; width:14.2857%;" | Sunday
! style="min-width:150px; width:14.2857%;" | Monday
! style="min-width:150px; width:14.2857%;" | Tuesday
! style="min-width:150px; width:14.2857%;" | Wednesday
! style="min-width:150px; width:14.2857%;" | Thursday
! style="min-width:150px; width:14.2857%;" | Friday
! style="min-width:150px; width:14.2857%;" | Saturday
|- style="height:100px; vertical-align:top;"
| '''1'''
| '''2'''
| '''3'''
{{event open house|19:00|Meet & Geek}}
| '''4'''
| '''5'''
| '''6'''
| '''7'''
|- style="height:100px; vertical-align:top;"
| '''8'''
| '''9'''
| '''10'''
{{event open house|19:00|Meet & Geek}}
| '''11'''
| '''12'''
| '''13'''
| '''14'''
{{event training|09:00|[https://my.protospace.ca/school/classdetails/13398 Manual Mill & Advanced Lathe]}}
|- style="height:100px; vertical-align:top;"
| '''15'''
| '''16'''
| '''17'''
{{event open house|19:00|Meet & Geek}}
| '''18'''
{{event meeting|19:03|Members' Meeting}}
| '''19'''
| '''20'''
| '''21'''
{{event clean|10:00|Monthly Clean}}
|- style="height:100px; vertical-align:top;"
| '''22'''
| '''23'''
| '''24'''
| '''25'''
| '''26'''
| '''27'''
| '''28'''
|- style="height:100px; vertical-align:top;"
| '''29'''
| '''30'''
| '''31'''
|
|
|
|
|}

==January 2020==

{{calendar legend}}

{| class="wikitable" style="width:100%;"
! style="min-width:150px; width:14.2857%;" | Sunday
! style="min-width:150px; width:14.2857%;" | Monday
! style="min-width:150px; width:14.2857%;" | Tuesday
! style="min-width:150px; width:14.2857%;" | Wednesday
! style="min-width:150px; width:14.2857%;" | Thursday
! style="min-width:150px; width:14.2857%;" | Friday
! style="min-width:150px; width:14.2857%;" | Saturday
|- style="height:100px; vertical-align:top;"
|
|
|
| '''1'''
| '''2'''
| '''3'''
| '''4'''
|- style="height:100px; vertical-align:top;"
| '''5'''
| '''6'''
| '''7'''
{{event open house|19:00|Meet & Geek}}
| '''8'''
| '''9'''
| '''10'''
| '''11'''
|- style="height:100px; vertical-align:top;"
| '''12'''
| '''13'''
| '''14'''
{{event open house|19:00|Meet & Geek}}
| '''15'''
| '''16'''
{{event meeting|19:03|Members' Meeting}}
| '''17'''
| '''18'''
{{event clean|10:00|Monthly Clean}}
|- style="height:100px; vertical-align:top;"
| '''19'''
| '''20'''
| '''21'''
{{event open house|19:00|Meet & Geek}}
| '''22'''
| '''23'''
| '''24'''
| '''25'''
|- style="height:100px; vertical-align:top;"
| '''26'''
| '''27'''
| '''28'''
{{event open house|19:00|Meet & Geek}}
| '''29'''
| '''30'''
| '''31'''
|
|}

[[Category:Calendar]]

Laser cutter (Trotec Speedy 300) ID:107

2019-10-10T13:19:13Z

Cjs: fixed broken link to manual

{{Equipment page
| toolname = Trotec
| model = [https://www.troteclaser.com/en-ca/laser-machines/laser-engravers-speedy-series/ Speedy 300]
| serial = S3-4699
| owner = Protospace
| loanstatus = Owned by Protospace
| arrived = December 2016
| location = Bay 108, near the door to the front rooms
| status = Working
| permission = Members & Friends Only
| certification = Must complete [[Laser Certification]] and [[Trotec Certification]]
| id = 107
}}

==Specs==

==Documentation==

[https://www.troteclaser.com/fileadmin/content/images/Contact_Support/Manuals/speedy300-manual-en.pdf Speedy 300 Manual]

[[Category:Showcase tools]]
[[Category:Plasticworking tools]]
[[Category:Woodworking tools]]
[[Category:Textileworking tools]]
[[Category:Computer-controlled tools]]

Approved policies/Legal Notices

2019-10-10T12:13:40Z

Cjs: fixed email links, minor reformatting, added history section

__NOTOC__
These notices are also provided in [https://drive.google.com/file/d/0Bx_IBOMvhGElY0JOeUF0N1FVMHM/view PDF Format]. In case of disagreement, the version approved by motion as recorded in the minutes prevails.

== Data Service Providers Notice ==

Calgary Protospace Ltd makes use of computer networks to access data. Internet packets may travel routes that are not limited to Canadian networks. In addition, Protospace uses or may use externally hosted email and "cloud services" (such as Google Docs/Drive, OneDrive, or QuickBooks Online) for business purposes.

Accordingly, members are advised that Protospace data may be transmitted or stored on computers or computer networks that are located outside of Alberta or outside of Canada.

This notice is provided in compliance with section 13.1 of the ''Personal Information Protection Act'' of Alberta. For more information about the ''Act'', visit http://servicealberta.ca/pipa/. If you have questions about the use of cloud services or networks at Calgary Protospace Ltd, contact [mailto:info@protospace.ca info@protospace.ca], or attend a monthly members' meeting.

== Information Collection Notice ==

When you first apply to be a member of Calgary Protospace Ltd, we will collect your name, address and telephone number (and/or other necessary personal information). When approved for membership, and before being issued a key, a Director will verify that your name matches a piece of identification. As you participate in events, training and activities, you may choose to provide additional information relevant to the event.

We will use your information to:
* confirm your identity
* set up a membership in your name
* match financial transactions (such as dues payments) to your membership
* create computer accounts and/or building access credentials for you
* record your ability to use various tools and equipment
* notify you of upcoming events, including:
** mandatory notifications, such as notice of extra-ordinary general meetings, in accordance with the law and our Articles of Association,
** optional notifications, such as training opportunities
* contact you or your designate in the event of an emergency

We may disclose your personal information:
* to you
* to a person who we are satisfied is requesting the information on your behalf
* when required by law
* to a public authority if, in our reasonable judgment, there appears to be an imminent danger which could be avoided by disclosing the information
* volunteers who to perform the functions listed above
* in the case of your name, membership level, and current membership status, other members of Calgary Protospace Ltd.

This notice is provided in compliance with section 13 of the ''Personal Information Protection Act'' of Alberta. For more information about the ''Act'', visit http://servicealberta.ca/pipa/. If you have any questions about the collection of your personal information, contact [mailto:info@protospace.ca info@protospace.ca], or attend a monthly members' meeting.

==History==

Adopted at 2015-01-10 Members' Meeting

Welcome to Protospace

2019-10-10T11:54:03Z

Cjs: updated link

__NOTOC__
[[File:Streetview.png|thumb|right|312px|
1530 27th Avenue NE, Bay 108 
Calgary, Alberta, Canada 
T2E 7S6 
[https://www.google.ca/maps/place/Calgary+Protospace+Ltd./@51.07701,-114.0255015,17z/data=!3m1!4b1!4m2!3m1!1s0x537177754cb71bf9:0xa0039e8a3e820581 Directions via Google Maps]|link=https://www.google.ca/maps/place/Calgary+Protospace+Ltd./@51.07701,-114.0255015,17z/data=!3m1!4b1!4m2!3m1!1s0x537177754cb71bf9:0xa0039e8a3e820581]]

'''Welcome to the Wiki of [http://www.protospace.ca/ Protospace] - Calgary's Maker and Hacker Space!'''

Our goal at Protospace is to facilitate innovative and collaborative projects in [[Wikipedia:Calgary|Calgary]]. This wiki is open to both members and the public, but require you [[Special:UserLogin/signup|register an account]] to make edits.

== Making at the Space ==

To get a rough feel for our space here is an interactive, 360° view of our [https://theta360.com/s/bbZ26vbh3l8Co5Fimb3QVdOam main bays] and [https://theta360.com/s/bNWSrBLS2rRcM4Wew5Rv3Kygq upstairs area].

Here is a gallery of [[tools we have]] with links to pages describing who they belong to, required in-house certifications, and other info.

You might also find it helpful to know [[where to source tools and materials]].

Our space has some additional amenities such as [https://youtu.be/x4y21Wb0La8 computers], bathrooms, Wi-Fi, kitchen, office, [https://youtu.be/cCVIgT71BMQ personal shelves], and [https://youtu.be/9nH9YmDDKuc materials], and is accessible via public transit.

==Links==

===Resources & Information===
: [[Where to source tools and materials| Sourcing Tools & Materials]]
: [[Resources for makers| Resources For Makers]]
: [[List of links and email addresses| Links and Contact Information]]
: [[Set up a payment| Set up a Payment]]

===Policies & Documents===
: [[Wiki conventions| Wiki Conventions]]
: [[Approved policies| Approved Policies]]
: [[Legal Notices| Legal Notices regarding Privacy and Data Collection]]
: [[Meeting minutes| Meeting Documents]]

Approved policies

2019-10-10T11:50:33Z

Cjs: updated link

Protospace has a lot of traditions and things passed down by oral tradition. As the membership has grown, it's become necessary to codify some things into written policies.

Policies are generally adopted by the membership at an Annual General Meeting, an Extraordinary General Meeting, or a monthly Members' Meeting. In some cases, a policy can be set by the Directors.

As policies are adopted in a written form, they are [https://drive.google.com/drive/folders/0Bx_IBOMvhGElU2VHeTRZVWd2dHM being collected in one place], as well as posted here. Members can review the minutes of the appropriate meeting for additional background.

* [[Storage Policy|Large Project Storage Policy]] (July 2013)
* [https://drive.google.com/file/d/0Bx_IBOMvhGElYVJ0SXprek9jMkU/view Membership Policies] (January 10, 2015)
* [https://drive.google.com/file/d/0Bx_IBOMvhGElTFpsd3RUUFVlTmc/view Vetting Policy and Procedures] (January 10, 2015)
* [https://drive.google.com/file/d/0Bx_IBOMvhGElVnlENXI3cFVFREE/view Young Person Membership Policy] (January 10, 2015)
* [https://drive.google.com/file/d/0Bx_IBOMvhGElWWMyaS1nZkZ5eUE/view Termination Policy and Procedures] (January 10, 2015)
* [[Legal Notices]] (January 10, 2015)
* [https://drive.google.com/file/d/0By-vvp6fxFekOGxPWHRrYmRTU1E/view Financial Motion Expiry Policy] (June 9, 2015)
* [[Safety and Security Enforcement Policy]] (July 14, 2016)
* [https://drive.google.com/file/d/0By-vvp6fxFekZTEtamhiVFc4LUk/view Unaccompanied Young Persons Policy] (September 8, 2016)
* [https://drive.google.com/file/d/0By-vvp6fxFekY0hnTlpVRVh0MGs/view Electronic Voting Policy] (September 8, 2016)
* [https://drive.google.com/file/d/0By-vvp6fxFekdko0Y2NNbVdqekE/view Proxy Voting Policy] (September 8, 2016)
* [[Reimbursement Policy]] (November 24, 2016)

Legal notices

2019-10-10T11:49:15Z

Cjs: Cjs moved page Legal notices to Legal Notices over redirect

#REDIRECT [[Legal Notices]]