https://ps-wiki.dns.t0.vc/api.php?action=feedcontributions&feedformat=atom&user=DaveProtospace Wiki - User contributions [en]2026-06-25T04:33:04ZUser contributionsMediaWiki 1.39.6https://ps-wiki.dns.t0.vc/index.php?title=Power_Levels&diff=1667Power Levels2015-04-12T17:05:05Z<p>Dave: </p>
<hr />
<div>[[Laser Cutter|Back to the Laser Cutter]]<br />
<br />
Placeholder - Hoping to create a list of current power levels with examples of output. Let me know if there's a better location for this page or if it's relevant at all. - wintr<br />
<br />
<br />
==Cut Mode==<br />
<br />
===Powder Coated Aluminium===<br />
<br />
<gallery><br />
File:Wintr-sigil.jpeg|Powder Coated Aluminium<br>Speed: 20<br>Power: 40<br>Date: 13.03.04<br />
</gallery><br />
<br />
==Engrave Mode==<br />
<br />
===Vegetable Tanned Leather===<br />
<br />
<gallery><br />
File:LeatherEngrave.jpg|Vegetable Tanned Leather<br>Note: power settings identified DO NOT reflect the current power modulation range of the laser (approximately 8%-30%) - values from the image would need to be scaled.<br>Note: four variables are varied on the grid: Speed, Power, Scan Gap, and Focus. Scan gap is the distance between successive engrave lines. Focus indicates distance above the surface of the material that the focal point is set.<br />
</gallery></div>Davehttps://ps-wiki.dns.t0.vc/index.php?title=Power_Levels&diff=1666Power Levels2015-04-12T17:03:17Z<p>Dave: </p>
<hr />
<div>[[Laser Cutter|Back to the Laser Cutter]]<br />
<br />
Placeholder - Hoping to create a list of current power levels with examples of output. Let me know if there's a better location for this page or if it's relevant at all. - wintr<br />
<br />
<br />
==Cut Mode==<br />
<br />
===Metal===<br />
<br />
<gallery><br />
File:Wintr-sigil.jpeg|Powder Coated Aluminum<br>Speed: 20<br>Power: 40<br>Date: 13.03.04<br />
</gallery><br />
<br />
==Engrave Mode==<br />
<br />
===Leather===<br />
<br />
<gallery><br />
File:LeatherEngrave.jpg|Vegetable Tanned Leather<br>Note: power settings identified DO NOT reflect the current power modulation range of the laser (approximately 8%-30%) - values from the image would need to be scaled.<br>Note: four variables are varied on the grid: Speed, Power, Scan Gap, and Focus. Scan gap is the distance between successive engrave lines. Focus indicates distance above the surface of the material that the focal point is set.<br />
</gallery></div>Davehttps://ps-wiki.dns.t0.vc/index.php?title=Power_Levels&diff=1665Power Levels2015-04-12T17:02:09Z<p>Dave: </p>
<hr />
<div>[[Laser Cutter|Back to the Laser Cutter]]<br />
<br />
Placeholder - Hoping to create a list of current power levels with examples of output. Let me know if there's a better location for this page or if it's relevant at all. - wintr<br />
<br />
<br />
==Cut Mode==<br />
<br />
===Metal===<br />
<br />
<gallery><br />
File:Wintr-sigil.jpeg|Powder Coated Aluminum<br>Speed: 20<br>Power: 40<br>Date: 13.03.04<br />
</gallery><br />
<br />
==Engrave Mode==<br />
<br />
==Leather==<br />
<br />
<gallery><br />
File:LeatherEngrave.jpg|Vegetable Tanned Leather<br>Note: power settings identified DO NOT reflect the current power modulation range of the laser (approximately 8%-30%) - values from the image would need to be scaled.<br>Note: four variables are varied on the grid: Speed, Power, Scan Gap, and Focus. Scan gap is the distance between successive engrave lines. Focus indicates distance above the surface of the material that the focal point is set.<br />
</gallery></div>Davehttps://ps-wiki.dns.t0.vc/index.php?title=File:LeatherEngrave.jpg&diff=1664File:LeatherEngrave.jpg2015-04-12T16:45:15Z<p>Dave: Laser settings for engraving vegetable tanned leather.</p>
<hr />
<div>Laser settings for engraving vegetable tanned leather.</div>Dave