Protospace Wiki - User contributions [en]

Bandsaw, metal, horizontal ID:37

2017-11-11T09:35:41Z

Matt Mulrrooney:

{{Equipment page
| toolname = Horizontal metal bandsaw
| model = ??
| serial = ??
| owner = Nick Brouillard (oudent)
| loanstatus = Long-term loan (no agreement)
| arrived = 2014–2015?
| location = metal shop
| status = Working
| permission = Full members?
| certification = Demo
| id = 37
| itemphoto = [[File:37.jpg|350px|thumb|right|]]
}}

[[Category:Metalworking tools]]
[[Category:Machine tools]]

== Specifications ==
Blade size: 3/4” × 0.32” × 93”

== Documents ==
Manual can be found in [https://groups.google.com/d/topic/protospace-discuss/IMFql-ZRhzE/discussion this thread]

==Repairs Needed==

*2017-11-09: Coolant nozzle joint cracked. Replace the joint or the whole coolant nozzle. It looks like this: [https://www.amazon.com/dp/B00G9RHJ98]
*2017-11-09: Vise hand-wheel is disconnected from the vise.

==Repair History==

Break-Fix log:

Regular maintenance log:

Laser cutter, large (Rabbit Laser RL-80-1290) ID:6

2016-12-05T06:18:59Z

Matt Mulrrooney:

{{#evt:
service=youtube
|id=https://www.youtube.com/watch?v=29YLiiapFHc
|alignment=right
}}

{{Equipment page
| toolname=Laser Cutter
| status=Operational with RESTRICTIONS. Please keep your jobs under 2-hours until Dec 18th, 2016.
| model=[http://www.rabbitlaserusa.com/laser_RL1290.html Rabbit Laser USA RL-80-1290] (where RL is the factory code, 80 is the original laser power in watts, and 1290 is the bed size)
| serial=??
| owner=Brian Queen
| loanstatus=Semi-Permanent Loan
| arrived=Before 2013
| location=Bay 108, near the door to the front rooms
| permission=Members & Friends Only
| certification=Must complete [[Laser Certification]]
| id=6
| repair_log=See [[#Repair History|Repair History]].
| itemphoto=[[File:6.jpg|500px|thumb|right|The large laser cutter, with its lid open and a piece of material on the bed. The laser cutter's computer is on the right side, with its monitor, keyboard, and mouse on top of the laser cutter's body. The tray of laser cutting tools and samples is on top of its body on the other side. The chiller is visible on the bottom shelf, along with some supplies. The [[vacuum cart]] is visible in the background on the left, with the [[Bay 108 electrical panels]] on the wall behind; that space is now occupied by the [[pinball machine (Road Kings)|pinball machine]], while the vacuum cart is in Bay 110.]]
}}

[[Category:Showcase tools]]
[[Category:Plasticworking tools]]
[[Category:Woodworking tools]]
[[Category:Textileworking tools]]
[[Category:Computer-controlled tools]]

__TOC__

Arguably the most popular tool at Protospace, the '''Laser Cutter''' uses a CO2 laser to cut & engrave a variety of non-metal materials (though some metals can be engraved).

=== Software ===
We currently have '''LaserCut 6.0''' installed on the computer connected to the Laser Cutter. Unfortunately LaserCut 6.0 requires a USB dongle to be hooked up to the PC at all times as a form of [https://en.wikipedia.org/wiki/Digital_rights_management DRM]. If you're running a personal copy you are restricted to a demo version (no saving - though there is a work around). Later versions (6.1+) have dropped the USB dongle requirement but can't communicate with our laser cutter directly.

==== Downloads ====

''LaserCut 5.3'' ([https://docs.google.com/uc?export=download&id=0B7yyT7cWvyTVS0FZRnlvenJtRHc Google Drive], [http://www.leetro.com/english/down/productcatalog2015/SoftwareDriver/MPC6565/LaserCut5.3(V4408)-Installer.rar Direct from Leetro]) for Windows Paid, Demo 
:The full version, but requires a special SenseLock USB Dongle to be connected to the PC running it or the software is limited to a demo mode (which is still useful for familiarizing yourself with the program). :This version is needed in order to communicate with our laser cutter, as 6.1 doesn't support ours.

''LaserCut 6.1'' ([https://docs.google.com/uc?export=download&id=0B7yyT7cWvyTVMVR4RklNLVkyaFk Google Drive], [http://www.leetro.com/english/down/productcatalog2015/SoftwareDriver/MPC6585/LaserCut61%20(MPC6585)%20Installer.rar Direct from Leetro]) for Windows Free 
:Not directly compatible with our laser cutter but has no USB dongle requirement, is fully functional aside from not being able to communicate with our laser cutter. Can still be used to prepare files for the earlier version of LaserCut ([[#Downloads|5.3]]). Both versions of LaserCut can be installed at the same time making this version a great option too.

''123D Make'' ([http://www.123dapp.com/make Direct from Autodesk]) for Windows, Mac, iPad/iPhone Free 
:A program for converting 3D models into pieces which can be laser cut & attached together to form a fully 3D model out of laser cut materials ([http://imgur.com/AnC8UJA example]).

''Pepakura Designer'' ([http://www.tamasoft.co.jp/pepakura-en/ Direct from Tama Software]) for Windows Paid, Demo 
:A program for converting 3D models into origami style pages which can be printed, cut out by hand &/or laser cut, then folded to form a 3D object ([http://www.tamasoft.co.jp/pepakura-en/gallery/list.php examples]).

=== Resources ===

The [https://drive.google.com/file/d/0B8eerfv68EE4eWNVRWRZX0FzY0k/view Powerpoint Presentation] that is shown as part of the laser certification process (December 8, 2015), useful as a refresher once you've completed your [[Laser_Certification|certification]].

[http://templatemaker.nl/ TemplateMaker], a very useful Online tool for generating various custom boxes & shapes that can be cut on the laser.

[http://www.wolfiesden.com/Laser/PuzzleCreator.asp Wolfie's SVG Puzzle Generator], exports a randomly generated puzzle in SVG format which can be converted to DXF and then laser cut out of something (in order to make personalized puzzles).

[http://www.makercase.com/ MakerCase], generates a proper box with the option to set the thickness of the material & pick which style of joints to use.

{{Warning|It is imperative that you do a [[Chlorine Test]] on unapproved materials before working on them with the Laser Cutter}}

==Specs==

* Controller: [http://www.leetro.com/english/sale/1-2.html Leetro MPC 6525A]
* 80 watt
* 4x3' CNC bed
* Front shield can be dropped to insert pieces longer than 3'
* Water cooled & Ducted
* Can cut or etch up to 1/2" thick light materials such as woods and some plastics
* Cannot cut any chlorinated synthetics (some types of plastics & rubbers)

==Usage Notes==
* Complete [[Laser Certification]] to learn how to use the laser. Training is offered about once a month.
* Perform a simple [[Chlorine Test]] on unapproved materials, as cutting or etching chlorinated materials damages the optics
* See [[Power Levels]] page for notes and details on cutting and etching various materials
* Power modulation is in a restricted range in the software due to a firmware bug (Approximately 8%-30% represents 0%-100% power)
* Controller occasionally locks up after large cut jobs. E-stop immediately if job timer does not increment in first 5 seconds of job. Post to list for recovery instructions
* Consult our [[Laser Standard Operating Procedure]]

==History==

* Originally on loan for 6 months (ending Aug 2012) in exchange for Protospace performing repairs.
** Loan has been extended.

==Repairs Needed==

*Upgrades discussed
**Adding air cooling to optics and laser head block
**Convincing power supply to modulate power levels properly
**Seal display on controller to prevent smoke from clouding over time.
**Replace and upgrade chiller (current chiller struggles to keep up with heat generated, and has no safeties on it to signal failure)
**Relocate chiller to an open-air position (wall mounted)

==Repair History==

Break-Fix log:
*Current status: UP with restrictions. Please keep your large jobs under 2 hours until December 18, 2016
*2016-12-04 - UP: Chiller repaired. Alignment and power testing is pending.
*2016-11-24 - DOWN: Laser tube replaced, chiller pump is broken.
*2016-11-13 - DOWN: Two new laser tubes ordered from an American source.
*2016-11-11 - DOWN: Chiller failure. Laser tube destroyed.
*2016-11-07 - UP: Laser tube replaced with an aging, but unused tube that was donated from a scrap laser
*2016-11-06 - DOWN: Chiller failure. Laser tube destroyed (overheated and glass cracked)

Regular maintenance log:

Laser cutter, large (Rabbit Laser RL-80-1290) ID:6

2016-12-05T06:18:27Z

Matt Mulrrooney:

{{#evt:
service=youtube
|id=https://www.youtube.com/watch?v=29YLiiapFHc
|alignment=right
}}

{{Equipment page
| toolname=Laser Cutter
| status=Operational with RESTRICTIONS. Please keep your jobs under 2-hours until Dec 18th.
| model=[http://www.rabbitlaserusa.com/laser_RL1290.html Rabbit Laser USA RL-80-1290] (where RL is the factory code, 80 is the original laser power in watts, and 1290 is the bed size)
| serial=??
| owner=Brian Queen
| loanstatus=Semi-Permanent Loan
| arrived=Before 2013
| location=Bay 108, near the door to the front rooms
| permission=Members & Friends Only
| certification=Must complete [[Laser Certification]]
| id=6
| repair_log=See [[#Repair History|Repair History]].
| itemphoto=[[File:6.jpg|500px|thumb|right|The large laser cutter, with its lid open and a piece of material on the bed. The laser cutter's computer is on the right side, with its monitor, keyboard, and mouse on top of the laser cutter's body. The tray of laser cutting tools and samples is on top of its body on the other side. The chiller is visible on the bottom shelf, along with some supplies. The [[vacuum cart]] is visible in the background on the left, with the [[Bay 108 electrical panels]] on the wall behind; that space is now occupied by the [[pinball machine (Road Kings)|pinball machine]], while the vacuum cart is in Bay 110.]]
}}

[[Category:Showcase tools]]
[[Category:Plasticworking tools]]
[[Category:Woodworking tools]]
[[Category:Textileworking tools]]
[[Category:Computer-controlled tools]]

__TOC__

Arguably the most popular tool at Protospace, the '''Laser Cutter''' uses a CO2 laser to cut & engrave a variety of non-metal materials (though some metals can be engraved).

=== Software ===
We currently have '''LaserCut 6.0''' installed on the computer connected to the Laser Cutter. Unfortunately LaserCut 6.0 requires a USB dongle to be hooked up to the PC at all times as a form of [https://en.wikipedia.org/wiki/Digital_rights_management DRM]. If you're running a personal copy you are restricted to a demo version (no saving - though there is a work around). Later versions (6.1+) have dropped the USB dongle requirement but can't communicate with our laser cutter directly.

==== Downloads ====

''LaserCut 5.3'' ([https://docs.google.com/uc?export=download&id=0B7yyT7cWvyTVS0FZRnlvenJtRHc Google Drive], [http://www.leetro.com/english/down/productcatalog2015/SoftwareDriver/MPC6565/LaserCut5.3(V4408)-Installer.rar Direct from Leetro]) for Windows Paid, Demo 
:The full version, but requires a special SenseLock USB Dongle to be connected to the PC running it or the software is limited to a demo mode (which is still useful for familiarizing yourself with the program). :This version is needed in order to communicate with our laser cutter, as 6.1 doesn't support ours.

''LaserCut 6.1'' ([https://docs.google.com/uc?export=download&id=0B7yyT7cWvyTVMVR4RklNLVkyaFk Google Drive], [http://www.leetro.com/english/down/productcatalog2015/SoftwareDriver/MPC6585/LaserCut61%20(MPC6585)%20Installer.rar Direct from Leetro]) for Windows Free 
:Not directly compatible with our laser cutter but has no USB dongle requirement, is fully functional aside from not being able to communicate with our laser cutter. Can still be used to prepare files for the earlier version of LaserCut ([[#Downloads|5.3]]). Both versions of LaserCut can be installed at the same time making this version a great option too.

''123D Make'' ([http://www.123dapp.com/make Direct from Autodesk]) for Windows, Mac, iPad/iPhone Free 
:A program for converting 3D models into pieces which can be laser cut & attached together to form a fully 3D model out of laser cut materials ([http://imgur.com/AnC8UJA example]).

''Pepakura Designer'' ([http://www.tamasoft.co.jp/pepakura-en/ Direct from Tama Software]) for Windows Paid, Demo 
:A program for converting 3D models into origami style pages which can be printed, cut out by hand &/or laser cut, then folded to form a 3D object ([http://www.tamasoft.co.jp/pepakura-en/gallery/list.php examples]).

=== Resources ===

The [https://drive.google.com/file/d/0B8eerfv68EE4eWNVRWRZX0FzY0k/view Powerpoint Presentation] that is shown as part of the laser certification process (December 8, 2015), useful as a refresher once you've completed your [[Laser_Certification|certification]].

[http://templatemaker.nl/ TemplateMaker], a very useful Online tool for generating various custom boxes & shapes that can be cut on the laser.

[http://www.wolfiesden.com/Laser/PuzzleCreator.asp Wolfie's SVG Puzzle Generator], exports a randomly generated puzzle in SVG format which can be converted to DXF and then laser cut out of something (in order to make personalized puzzles).

[http://www.makercase.com/ MakerCase], generates a proper box with the option to set the thickness of the material & pick which style of joints to use.

{{Warning|It is imperative that you do a [[Chlorine Test]] on unapproved materials before working on them with the Laser Cutter}}

==Specs==

* Controller: [http://www.leetro.com/english/sale/1-2.html Leetro MPC 6525A]
* 80 watt
* 4x3' CNC bed
* Front shield can be dropped to insert pieces longer than 3'
* Water cooled & Ducted
* Can cut or etch up to 1/2" thick light materials such as woods and some plastics
* Cannot cut any chlorinated synthetics (some types of plastics & rubbers)

==Usage Notes==
* Complete [[Laser Certification]] to learn how to use the laser. Training is offered about once a month.
* Perform a simple [[Chlorine Test]] on unapproved materials, as cutting or etching chlorinated materials damages the optics
* See [[Power Levels]] page for notes and details on cutting and etching various materials
* Power modulation is in a restricted range in the software due to a firmware bug (Approximately 8%-30% represents 0%-100% power)
* Controller occasionally locks up after large cut jobs. E-stop immediately if job timer does not increment in first 5 seconds of job. Post to list for recovery instructions
* Consult our [[Laser Standard Operating Procedure]]

==History==

* Originally on loan for 6 months (ending Aug 2012) in exchange for Protospace performing repairs.
** Loan has been extended.

==Repairs Needed==

*Upgrades discussed
**Adding air cooling to optics and laser head block
**Convincing power supply to modulate power levels properly
**Seal display on controller to prevent smoke from clouding over time.
**Replace and upgrade chiller (current chiller struggles to keep up with heat generated, and has no safeties on it to signal failure)
**Relocate chiller to an open-air position (wall mounted)

==Repair History==

Break-Fix log:
*Current status: UP with restrictions. Please keep your large jobs under 2 hours until December 18, 2016
*2016-12-04 - UP: Chiller repaired. Alignment and power testing is pending.
*2016-11-24 - DOWN: Laser tube replaced, chiller pump is broken.
*2016-11-13 - DOWN: Two new laser tubes ordered from an American source.
*2016-11-11 - DOWN: Chiller failure. Laser tube destroyed.
*2016-11-07 - UP: Laser tube replaced with an aging, but unused tube that was donated from a scrap laser
*2016-11-06 - DOWN: Chiller failure. Laser tube destroyed (overheated and glass cracked)

Regular maintenance log:

Laser cutter, large (Rabbit Laser RL-80-1290) ID:6

2016-12-05T06:17:07Z

Matt Mulrrooney: /* Repair History */

{{#evt:
service=youtube
|id=https://www.youtube.com/watch?v=29YLiiapFHc
|alignment=right
}}

{{Equipment page
| toolname=Laser Cutter
| status=Operational. PLEASE KEEP YOUR JOBS UNDER 2-HOURS UNTIL DEC 18.
| model=[http://www.rabbitlaserusa.com/laser_RL1290.html Rabbit Laser USA RL-80-1290] (where RL is the factory code, 80 is the original laser power in watts, and 1290 is the bed size)
| serial=??
| owner=Brian Queen
| loanstatus=Semi-Permanent Loan
| arrived=Before 2013
| location=Bay 108, near the door to the front rooms
| permission=Members & Friends Only
| certification=Must complete [[Laser Certification]]
| id=6
| repair_log=See [[#Repair History|Repair History]].
| itemphoto=[[File:6.jpg|500px|thumb|right|The large laser cutter, with its lid open and a piece of material on the bed. The laser cutter's computer is on the right side, with its monitor, keyboard, and mouse on top of the laser cutter's body. The tray of laser cutting tools and samples is on top of its body on the other side. The chiller is visible on the bottom shelf, along with some supplies. The [[vacuum cart]] is visible in the background on the left, with the [[Bay 108 electrical panels]] on the wall behind; that space is now occupied by the [[pinball machine (Road Kings)|pinball machine]], while the vacuum cart is in Bay 110.]]
}}

[[Category:Showcase tools]]
[[Category:Plasticworking tools]]
[[Category:Woodworking tools]]
[[Category:Textileworking tools]]
[[Category:Computer-controlled tools]]

__TOC__

Arguably the most popular tool at Protospace, the '''Laser Cutter''' uses a CO2 laser to cut & engrave a variety of non-metal materials (though some metals can be engraved).

=== Software ===
We currently have '''LaserCut 6.0''' installed on the computer connected to the Laser Cutter. Unfortunately LaserCut 6.0 requires a USB dongle to be hooked up to the PC at all times as a form of [https://en.wikipedia.org/wiki/Digital_rights_management DRM]. If you're running a personal copy you are restricted to a demo version (no saving - though there is a work around). Later versions (6.1+) have dropped the USB dongle requirement but can't communicate with our laser cutter directly.

==== Downloads ====

''LaserCut 5.3'' ([https://docs.google.com/uc?export=download&id=0B7yyT7cWvyTVS0FZRnlvenJtRHc Google Drive], [http://www.leetro.com/english/down/productcatalog2015/SoftwareDriver/MPC6565/LaserCut5.3(V4408)-Installer.rar Direct from Leetro]) for Windows Paid, Demo 
:The full version, but requires a special SenseLock USB Dongle to be connected to the PC running it or the software is limited to a demo mode (which is still useful for familiarizing yourself with the program). :This version is needed in order to communicate with our laser cutter, as 6.1 doesn't support ours.

''LaserCut 6.1'' ([https://docs.google.com/uc?export=download&id=0B7yyT7cWvyTVMVR4RklNLVkyaFk Google Drive], [http://www.leetro.com/english/down/productcatalog2015/SoftwareDriver/MPC6585/LaserCut61%20(MPC6585)%20Installer.rar Direct from Leetro]) for Windows Free 
:Not directly compatible with our laser cutter but has no USB dongle requirement, is fully functional aside from not being able to communicate with our laser cutter. Can still be used to prepare files for the earlier version of LaserCut ([[#Downloads|5.3]]). Both versions of LaserCut can be installed at the same time making this version a great option too.

''123D Make'' ([http://www.123dapp.com/make Direct from Autodesk]) for Windows, Mac, iPad/iPhone Free 
:A program for converting 3D models into pieces which can be laser cut & attached together to form a fully 3D model out of laser cut materials ([http://imgur.com/AnC8UJA example]).

''Pepakura Designer'' ([http://www.tamasoft.co.jp/pepakura-en/ Direct from Tama Software]) for Windows Paid, Demo 
:A program for converting 3D models into origami style pages which can be printed, cut out by hand &/or laser cut, then folded to form a 3D object ([http://www.tamasoft.co.jp/pepakura-en/gallery/list.php examples]).

=== Resources ===

The [https://drive.google.com/file/d/0B8eerfv68EE4eWNVRWRZX0FzY0k/view Powerpoint Presentation] that is shown as part of the laser certification process (December 8, 2015), useful as a refresher once you've completed your [[Laser_Certification|certification]].

[http://templatemaker.nl/ TemplateMaker], a very useful Online tool for generating various custom boxes & shapes that can be cut on the laser.

[http://www.wolfiesden.com/Laser/PuzzleCreator.asp Wolfie's SVG Puzzle Generator], exports a randomly generated puzzle in SVG format which can be converted to DXF and then laser cut out of something (in order to make personalized puzzles).

[http://www.makercase.com/ MakerCase], generates a proper box with the option to set the thickness of the material & pick which style of joints to use.

{{Warning|It is imperative that you do a [[Chlorine Test]] on unapproved materials before working on them with the Laser Cutter}}

==Specs==

* Controller: [http://www.leetro.com/english/sale/1-2.html Leetro MPC 6525A]
* 80 watt
* 4x3' CNC bed
* Front shield can be dropped to insert pieces longer than 3'
* Water cooled & Ducted
* Can cut or etch up to 1/2" thick light materials such as woods and some plastics
* Cannot cut any chlorinated synthetics (some types of plastics & rubbers)

==Usage Notes==
* Complete [[Laser Certification]] to learn how to use the laser. Training is offered about once a month.
* Perform a simple [[Chlorine Test]] on unapproved materials, as cutting or etching chlorinated materials damages the optics
* See [[Power Levels]] page for notes and details on cutting and etching various materials
* Power modulation is in a restricted range in the software due to a firmware bug (Approximately 8%-30% represents 0%-100% power)
* Controller occasionally locks up after large cut jobs. E-stop immediately if job timer does not increment in first 5 seconds of job. Post to list for recovery instructions
* Consult our [[Laser Standard Operating Procedure]]

==History==

* Originally on loan for 6 months (ending Aug 2012) in exchange for Protospace performing repairs.
** Loan has been extended.

==Repairs Needed==

*Upgrades discussed
**Adding air cooling to optics and laser head block
**Convincing power supply to modulate power levels properly
**Seal display on controller to prevent smoke from clouding over time.
**Replace and upgrade chiller (current chiller struggles to keep up with heat generated, and has no safeties on it to signal failure)
**Relocate chiller to an open-air position (wall mounted)

==Repair History==

Break-Fix log:
*Current status: UP with restrictions. Please keep your large jobs under 2 hours until December 18, 2016
*2016-12-04 - UP: Chiller repaired. Alignment and power testing is pending.
*2016-11-24 - DOWN: Laser tube replaced, chiller pump is broken.
*2016-11-13 - DOWN: Two new laser tubes ordered from an American source.
*2016-11-11 - DOWN: Chiller failure. Laser tube destroyed.
*2016-11-07 - UP: Laser tube replaced with an aging, but unused tube that was donated from a scrap laser
*2016-11-06 - DOWN: Chiller failure. Laser tube destroyed (overheated and glass cracked)

Regular maintenance log:

Laser cutter, large (Rabbit Laser RL-80-1290) ID:6

2016-12-05T06:14:04Z

Matt Mulrrooney:

{{#evt:
service=youtube
|id=https://www.youtube.com/watch?v=29YLiiapFHc
|alignment=right
}}

{{Equipment page
| toolname=Laser Cutter
| status=Operational. PLEASE KEEP YOUR JOBS UNDER 2-HOURS UNTIL DEC 18.
| model=[http://www.rabbitlaserusa.com/laser_RL1290.html Rabbit Laser USA RL-80-1290] (where RL is the factory code, 80 is the original laser power in watts, and 1290 is the bed size)
| serial=??
| owner=Brian Queen
| loanstatus=Semi-Permanent Loan
| arrived=Before 2013
| location=Bay 108, near the door to the front rooms
| permission=Members & Friends Only
| certification=Must complete [[Laser Certification]]
| id=6
| repair_log=See [[#Repair History|Repair History]].
| itemphoto=[[File:6.jpg|500px|thumb|right|The large laser cutter, with its lid open and a piece of material on the bed. The laser cutter's computer is on the right side, with its monitor, keyboard, and mouse on top of the laser cutter's body. The tray of laser cutting tools and samples is on top of its body on the other side. The chiller is visible on the bottom shelf, along with some supplies. The [[vacuum cart]] is visible in the background on the left, with the [[Bay 108 electrical panels]] on the wall behind; that space is now occupied by the [[pinball machine (Road Kings)|pinball machine]], while the vacuum cart is in Bay 110.]]
}}

[[Category:Showcase tools]]
[[Category:Plasticworking tools]]
[[Category:Woodworking tools]]
[[Category:Textileworking tools]]
[[Category:Computer-controlled tools]]

__TOC__

Arguably the most popular tool at Protospace, the '''Laser Cutter''' uses a CO2 laser to cut & engrave a variety of non-metal materials (though some metals can be engraved).

=== Software ===
We currently have '''LaserCut 6.0''' installed on the computer connected to the Laser Cutter. Unfortunately LaserCut 6.0 requires a USB dongle to be hooked up to the PC at all times as a form of [https://en.wikipedia.org/wiki/Digital_rights_management DRM]. If you're running a personal copy you are restricted to a demo version (no saving - though there is a work around). Later versions (6.1+) have dropped the USB dongle requirement but can't communicate with our laser cutter directly.

==== Downloads ====

''LaserCut 5.3'' ([https://docs.google.com/uc?export=download&id=0B7yyT7cWvyTVS0FZRnlvenJtRHc Google Drive], [http://www.leetro.com/english/down/productcatalog2015/SoftwareDriver/MPC6565/LaserCut5.3(V4408)-Installer.rar Direct from Leetro]) for Windows Paid, Demo 
:The full version, but requires a special SenseLock USB Dongle to be connected to the PC running it or the software is limited to a demo mode (which is still useful for familiarizing yourself with the program). :This version is needed in order to communicate with our laser cutter, as 6.1 doesn't support ours.

''LaserCut 6.1'' ([https://docs.google.com/uc?export=download&id=0B7yyT7cWvyTVMVR4RklNLVkyaFk Google Drive], [http://www.leetro.com/english/down/productcatalog2015/SoftwareDriver/MPC6585/LaserCut61%20(MPC6585)%20Installer.rar Direct from Leetro]) for Windows Free 
:Not directly compatible with our laser cutter but has no USB dongle requirement, is fully functional aside from not being able to communicate with our laser cutter. Can still be used to prepare files for the earlier version of LaserCut ([[#Downloads|5.3]]). Both versions of LaserCut can be installed at the same time making this version a great option too.

''123D Make'' ([http://www.123dapp.com/make Direct from Autodesk]) for Windows, Mac, iPad/iPhone Free 
:A program for converting 3D models into pieces which can be laser cut & attached together to form a fully 3D model out of laser cut materials ([http://imgur.com/AnC8UJA example]).

''Pepakura Designer'' ([http://www.tamasoft.co.jp/pepakura-en/ Direct from Tama Software]) for Windows Paid, Demo 
:A program for converting 3D models into origami style pages which can be printed, cut out by hand &/or laser cut, then folded to form a 3D object ([http://www.tamasoft.co.jp/pepakura-en/gallery/list.php examples]).

=== Resources ===

The [https://drive.google.com/file/d/0B8eerfv68EE4eWNVRWRZX0FzY0k/view Powerpoint Presentation] that is shown as part of the laser certification process (December 8, 2015), useful as a refresher once you've completed your [[Laser_Certification|certification]].

[http://templatemaker.nl/ TemplateMaker], a very useful Online tool for generating various custom boxes & shapes that can be cut on the laser.

[http://www.wolfiesden.com/Laser/PuzzleCreator.asp Wolfie's SVG Puzzle Generator], exports a randomly generated puzzle in SVG format which can be converted to DXF and then laser cut out of something (in order to make personalized puzzles).

[http://www.makercase.com/ MakerCase], generates a proper box with the option to set the thickness of the material & pick which style of joints to use.

{{Warning|It is imperative that you do a [[Chlorine Test]] on unapproved materials before working on them with the Laser Cutter}}

==Specs==

* Controller: [http://www.leetro.com/english/sale/1-2.html Leetro MPC 6525A]
* 80 watt
* 4x3' CNC bed
* Front shield can be dropped to insert pieces longer than 3'
* Water cooled & Ducted
* Can cut or etch up to 1/2" thick light materials such as woods and some plastics
* Cannot cut any chlorinated synthetics (some types of plastics & rubbers)

==Usage Notes==
* Complete [[Laser Certification]] to learn how to use the laser. Training is offered about once a month.
* Perform a simple [[Chlorine Test]] on unapproved materials, as cutting or etching chlorinated materials damages the optics
* See [[Power Levels]] page for notes and details on cutting and etching various materials
* Power modulation is in a restricted range in the software due to a firmware bug (Approximately 8%-30% represents 0%-100% power)
* Controller occasionally locks up after large cut jobs. E-stop immediately if job timer does not increment in first 5 seconds of job. Post to list for recovery instructions
* Consult our [[Laser Standard Operating Procedure]]

==History==

* Originally on loan for 6 months (ending Aug 2012) in exchange for Protospace performing repairs.
** Loan has been extended.

==Repairs Needed==

*Upgrades discussed
**Adding air cooling to optics and laser head block
**Convincing power supply to modulate power levels properly
**Seal display on controller to prevent smoke from clouding over time.
**Replace and upgrade chiller (current chiller struggles to keep up with heat generated, and has no safeties on it to signal failure)
**Relocate chiller to an open-air position (wall mounted)

==Repair History==

Break-Fix log:
*Current status: DOWN
*2016-11-24 - DOWN: Laser tube replaced, chiller pump is broken.
*2016-11-13 - DOWN: Two new laser tubes ordered from an American source.
*2016-11-11 - DOWN: Chiller failure. Laser tube destroyed.
*2016-11-07 - UP: Laser tube replaced with an aging, but unused tube that was donated from a scrap laser
*2016-11-06 - DOWN: Chiller failure. Laser tube destroyed (overheated and glass cracked)

Regular maintenance log:

Laser cutter, large (Rabbit Laser RL-80-1290) ID:6

2016-12-05T06:12:32Z

Matt Mulrrooney:

{{#evt:
service=youtube
|id=https://www.youtube.com/watch?v=29YLiiapFHc
|alignment=right
}}

{{Equipment page
| toolname=Laser Cutter
| status=Operational with caveats - PLEASE KEEP YOUR JOBS UNDER 2-HOURS UNTIL DEC 18.
| model=[http://www.rabbitlaserusa.com/laser_RL1290.html Rabbit Laser USA RL-80-1290] (where RL is the factory code, 80 is the original laser power in watts, and 1290 is the bed size)
| serial=??
| owner=Brian Queen
| loanstatus=Semi-Permanent Loan
| arrived=Before 2013
| location=Bay 108, near the door to the front rooms
| permission=Members & Friends Only
| certification=Must complete [[Laser Certification]]
| id=6
| repair_log=See [[#Repair History|Repair History]].
| itemphoto=[[File:6.jpg|500px|thumb|right|The large laser cutter, with its lid open and a piece of material on the bed. The laser cutter's computer is on the right side, with its monitor, keyboard, and mouse on top of the laser cutter's body. The tray of laser cutting tools and samples is on top of its body on the other side. The chiller is visible on the bottom shelf, along with some supplies. The [[vacuum cart]] is visible in the background on the left, with the [[Bay 108 electrical panels]] on the wall behind; that space is now occupied by the [[pinball machine (Road Kings)|pinball machine]], while the vacuum cart is in Bay 110.]]
}}

[[Category:Showcase tools]]
[[Category:Plasticworking tools]]
[[Category:Woodworking tools]]
[[Category:Textileworking tools]]
[[Category:Computer-controlled tools]]

__TOC__

Arguably the most popular tool at Protospace, the '''Laser Cutter''' uses a CO2 laser to cut & engrave a variety of non-metal materials (though some metals can be engraved).

=== Software ===
We currently have '''LaserCut 6.0''' installed on the computer connected to the Laser Cutter. Unfortunately LaserCut 6.0 requires a USB dongle to be hooked up to the PC at all times as a form of [https://en.wikipedia.org/wiki/Digital_rights_management DRM]. If you're running a personal copy you are restricted to a demo version (no saving - though there is a work around). Later versions (6.1+) have dropped the USB dongle requirement but can't communicate with our laser cutter directly.

==== Downloads ====

''LaserCut 5.3'' ([https://docs.google.com/uc?export=download&id=0B7yyT7cWvyTVS0FZRnlvenJtRHc Google Drive], [http://www.leetro.com/english/down/productcatalog2015/SoftwareDriver/MPC6565/LaserCut5.3(V4408)-Installer.rar Direct from Leetro]) for Windows Paid, Demo 
:The full version, but requires a special SenseLock USB Dongle to be connected to the PC running it or the software is limited to a demo mode (which is still useful for familiarizing yourself with the program). :This version is needed in order to communicate with our laser cutter, as 6.1 doesn't support ours.

''LaserCut 6.1'' ([https://docs.google.com/uc?export=download&id=0B7yyT7cWvyTVMVR4RklNLVkyaFk Google Drive], [http://www.leetro.com/english/down/productcatalog2015/SoftwareDriver/MPC6585/LaserCut61%20(MPC6585)%20Installer.rar Direct from Leetro]) for Windows Free 
:Not directly compatible with our laser cutter but has no USB dongle requirement, is fully functional aside from not being able to communicate with our laser cutter. Can still be used to prepare files for the earlier version of LaserCut ([[#Downloads|5.3]]). Both versions of LaserCut can be installed at the same time making this version a great option too.

''123D Make'' ([http://www.123dapp.com/make Direct from Autodesk]) for Windows, Mac, iPad/iPhone Free 
:A program for converting 3D models into pieces which can be laser cut & attached together to form a fully 3D model out of laser cut materials ([http://imgur.com/AnC8UJA example]).

''Pepakura Designer'' ([http://www.tamasoft.co.jp/pepakura-en/ Direct from Tama Software]) for Windows Paid, Demo 
:A program for converting 3D models into origami style pages which can be printed, cut out by hand &/or laser cut, then folded to form a 3D object ([http://www.tamasoft.co.jp/pepakura-en/gallery/list.php examples]).

=== Resources ===

The [https://drive.google.com/file/d/0B8eerfv68EE4eWNVRWRZX0FzY0k/view Powerpoint Presentation] that is shown as part of the laser certification process (December 8, 2015), useful as a refresher once you've completed your [[Laser_Certification|certification]].

[http://templatemaker.nl/ TemplateMaker], a very useful Online tool for generating various custom boxes & shapes that can be cut on the laser.

[http://www.wolfiesden.com/Laser/PuzzleCreator.asp Wolfie's SVG Puzzle Generator], exports a randomly generated puzzle in SVG format which can be converted to DXF and then laser cut out of something (in order to make personalized puzzles).

[http://www.makercase.com/ MakerCase], generates a proper box with the option to set the thickness of the material & pick which style of joints to use.

{{Warning|It is imperative that you do a [[Chlorine Test]] on unapproved materials before working on them with the Laser Cutter}}

==Specs==

* Controller: [http://www.leetro.com/english/sale/1-2.html Leetro MPC 6525A]
* 80 watt
* 4x3' CNC bed
* Front shield can be dropped to insert pieces longer than 3'
* Water cooled & Ducted
* Can cut or etch up to 1/2" thick light materials such as woods and some plastics
* Cannot cut any chlorinated synthetics (some types of plastics & rubbers)

==Usage Notes==
* Complete [[Laser Certification]] to learn how to use the laser. Training is offered about once a month.
* Perform a simple [[Chlorine Test]] on unapproved materials, as cutting or etching chlorinated materials damages the optics
* See [[Power Levels]] page for notes and details on cutting and etching various materials
* Power modulation is in a restricted range in the software due to a firmware bug (Approximately 8%-30% represents 0%-100% power)
* Controller occasionally locks up after large cut jobs. E-stop immediately if job timer does not increment in first 5 seconds of job. Post to list for recovery instructions
* Consult our [[Laser Standard Operating Procedure]]

==History==

* Originally on loan for 6 months (ending Aug 2012) in exchange for Protospace performing repairs.
** Loan has been extended.

==Repairs Needed==

*Upgrades discussed
**Adding air cooling to optics and laser head block
**Convincing power supply to modulate power levels properly
**Seal display on controller to prevent smoke from clouding over time.
**Replace and upgrade chiller (current chiller struggles to keep up with heat generated, and has no safeties on it to signal failure)
**Relocate chiller to an open-air position (wall mounted)

==Repair History==

Break-Fix log:
*Current status: DOWN
*2016-11-24 - DOWN: Laser tube replaced, chiller pump is broken.
*2016-11-13 - DOWN: Two new laser tubes ordered from an American source.
*2016-11-11 - DOWN: Chiller failure. Laser tube destroyed.
*2016-11-07 - UP: Laser tube replaced with an aging, but unused tube that was donated from a scrap laser
*2016-11-06 - DOWN: Chiller failure. Laser tube destroyed (overheated and glass cracked)

Regular maintenance log:

Laser cutter, large (Rabbit Laser RL-80-1290) ID:6

2016-12-02T17:57:21Z

Matt Mulrrooney: /* Repair History */

{{#evt:
service=youtube
|id=https://www.youtube.com/watch?v=29YLiiapFHc
|alignment=right
}}

{{Equipment page
| toolname=Laser Cutter
| model=[http://www.rabbitlaserusa.com/laser_RL1290.html Rabbit Laser USA RL-80-1290] (where RL is the factory code, 80 is the original laser power in watts, and 1290 is the bed size)
| serial=??
| owner=Brian Queen
| loanstatus=Semi-Permanent Loan
| arrived=Before 2013
| location=Bay 108, near the door to the front rooms
| status=Offline. Chiller needs repair/replacement. See [[#Repair History|Repair History]].
| permission=Members & Friends Only
| certification=Must complete [[Laser Certification]]
| id=6
| itemphoto=[[File:6.jpg|500px|thumb|right|The large laser cutter, with its lid open and a piece of material on the bed. The laser cutter's computer is on the right side, with its monitor, keyboard, and mouse on top of the laser cutter's body. The tray of laser cutting tools and samples is on top of its body on the other side. The chiller is visible on the bottom shelf, along with some supplies. The [[vacuum cart]] is visible in the background on the left, with the [[Bay 108 electrical panels]] on the wall behind; that space is now occupied by the [[pinball machine (Road Kings)|pinball machine]], while the vacuum cart is in Bay 110.]]
}}

[[Category:Showcase tools]]
[[Category:Plasticworking tools]]
[[Category:Woodworking tools]]
[[Category:Textileworking tools]]
[[Category:Computer-controlled tools]]

__TOC__

Arguably the most popular tool at Protospace, the '''Laser Cutter''' uses a CO2 laser to cut & engrave a variety of non-metal materials (though some metals can be engraved).

=== Software ===
We currently have '''LaserCut 6.0''' installed on the computer connected to the Laser Cutter. Unfortunately LaserCut 6.0 requires a USB dongle to be hooked up to the PC at all times as a form of [https://en.wikipedia.org/wiki/Digital_rights_management DRM]. If you're running a personal copy you are restricted to a demo version (no saving - though there is a work around). Later versions (6.1+) have dropped the USB dongle requirement but can't communicate with our laser cutter directly.

==== Downloads ====

''LaserCut 5.3'' ([https://docs.google.com/uc?export=download&id=0B7yyT7cWvyTVS0FZRnlvenJtRHc Google Drive], [http://www.leetro.com/english/down/productcatalog2015/SoftwareDriver/MPC6565/LaserCut5.3(V4408)-Installer.rar Direct from Leetro]) for Windows Paid, Demo 
:The full version, but requires a special SenseLock USB Dongle to be connected to the PC running it or the software is limited to a demo mode (which is still useful for familiarizing yourself with the program). :This version is needed in order to communicate with our laser cutter, as 6.1 doesn't support ours.

''LaserCut 6.1'' ([https://docs.google.com/uc?export=download&id=0B7yyT7cWvyTVMVR4RklNLVkyaFk Google Drive], [http://www.leetro.com/english/down/productcatalog2015/SoftwareDriver/MPC6585/LaserCut61%20(MPC6585)%20Installer.rar Direct from Leetro]) for Windows Free 
:Not directly compatible with our laser cutter but has no USB dongle requirement, is fully functional aside from not being able to communicate with our laser cutter. Can still be used to prepare files for the earlier version of LaserCut ([[#Downloads|5.3]]). Both versions of LaserCut can be installed at the same time making this version a great option too.

''123D Make'' ([http://www.123dapp.com/make Direct from Autodesk]) for Windows, Mac, iPad/iPhone Free 
:A program for converting 3D models into pieces which can be laser cut & attached together to form a fully 3D model out of laser cut materials ([http://imgur.com/AnC8UJA example]).

''Pepakura Designer'' ([http://www.tamasoft.co.jp/pepakura-en/ Direct from Tama Software]) for Windows Paid, Demo 
:A program for converting 3D models into origami style pages which can be printed, cut out by hand &/or laser cut, then folded to form a 3D object ([http://www.tamasoft.co.jp/pepakura-en/gallery/list.php examples]).

=== Resources ===

The [https://drive.google.com/file/d/0B8eerfv68EE4eWNVRWRZX0FzY0k/view Powerpoint Presentation] that is shown as part of the laser certification process (December 8, 2015), useful as a refresher once you've completed your [[Laser_Certification|certification]].

[http://templatemaker.nl/ TemplateMaker], a very useful Online tool for generating various custom boxes & shapes that can be cut on the laser.

[http://www.wolfiesden.com/Laser/PuzzleCreator.asp Wolfie's SVG Puzzle Generator], exports a randomly generated puzzle in SVG format which can be converted to DXF and then laser cut out of something (in order to make personalized puzzles).

[http://www.makercase.com/ MakerCase], generates a proper box with the option to set the thickness of the material & pick which style of joints to use.

{{Warning|It is imperative that you do a [[Chlorine Test]] on unapproved materials before working on them with the Laser Cutter}}

==Specs==

* Controller: [http://www.leetro.com/english/sale/1-2.html Leetro MPC 6525A]
* 80 watt
* 4x3' CNC bed
* Front shield can be dropped to insert pieces longer than 3'
* Water cooled & Ducted
* Can cut or etch up to 1/2" thick light materials such as woods and some plastics
* Cannot cut any chlorinated synthetics (some types of plastics & rubbers)

==Usage Notes==
* Complete [[Laser Certification]] to learn how to use the laser. Training is offered about once a month.
* Perform a simple [[Chlorine Test]] on unapproved materials, as cutting or etching chlorinated materials damages the optics
* See [[Power Levels]] page for notes and details on cutting and etching various materials
* Power modulation is in a restricted range in the software due to a firmware bug (Approximately 8%-30% represents 0%-100% power)
* Controller occasionally locks up after large cut jobs. E-stop immediately if job timer does not increment in first 5 seconds of job. Post to list for recovery instructions
* Consult our [[Laser Standard Operating Procedure]]

==History==

* Originally on loan for 6 months (ending Aug 2012) in exchange for Protospace performing repairs.
** Loan has been extended.

==Repairs Needed==

*Upgrades discussed
**Adding air cooling to optics and laser head block
**Convincing power supply to modulate power levels properly
**Seal display on controller to prevent smoke from clouding over time.
**Replace and upgrade chiller (current chiller struggles to keep up with heat generated, and has no safeties on it to signal failure)
**Relocate chiller to an open-air position (wall mounted)

==Repair History==

Break-Fix log:
*Current status: DOWN
*2016-11-24 - DOWN: Laser tube replaced, chiller pump is broken.
*2016-11-13 - DOWN: Two new laser tubes ordered from an American source.
*2016-11-11 - DOWN: Chiller failure. Laser tube destroyed.
*2016-11-07 - UP: Laser tube replaced with an aging, but unused tube that was donated from a scrap laser
*2016-11-06 - DOWN: Chiller failure. Laser tube destroyed (overheated and glass cracked)

Regular maintenance log:

Laser cutter, large (Rabbit Laser RL-80-1290) ID:6

2016-12-02T17:56:00Z

Matt Mulrrooney:

{{#evt:
service=youtube
|id=https://www.youtube.com/watch?v=29YLiiapFHc
|alignment=right
}}

{{Equipment page
| toolname=Laser Cutter
| model=[http://www.rabbitlaserusa.com/laser_RL1290.html Rabbit Laser USA RL-80-1290] (where RL is the factory code, 80 is the original laser power in watts, and 1290 is the bed size)
| serial=??
| owner=Brian Queen
| loanstatus=Semi-Permanent Loan
| arrived=Before 2013
| location=Bay 108, near the door to the front rooms
| status=Offline. Chiller needs repair/replacement. See [[#Repair History|Repair History]].
| permission=Members & Friends Only
| certification=Must complete [[Laser Certification]]
| id=6
| itemphoto=[[File:6.jpg|500px|thumb|right|The large laser cutter, with its lid open and a piece of material on the bed. The laser cutter's computer is on the right side, with its monitor, keyboard, and mouse on top of the laser cutter's body. The tray of laser cutting tools and samples is on top of its body on the other side. The chiller is visible on the bottom shelf, along with some supplies. The [[vacuum cart]] is visible in the background on the left, with the [[Bay 108 electrical panels]] on the wall behind; that space is now occupied by the [[pinball machine (Road Kings)|pinball machine]], while the vacuum cart is in Bay 110.]]
}}

[[Category:Showcase tools]]
[[Category:Plasticworking tools]]
[[Category:Woodworking tools]]
[[Category:Textileworking tools]]
[[Category:Computer-controlled tools]]

__TOC__

Arguably the most popular tool at Protospace, the '''Laser Cutter''' uses a CO2 laser to cut & engrave a variety of non-metal materials (though some metals can be engraved).

=== Software ===
We currently have '''LaserCut 6.0''' installed on the computer connected to the Laser Cutter. Unfortunately LaserCut 6.0 requires a USB dongle to be hooked up to the PC at all times as a form of [https://en.wikipedia.org/wiki/Digital_rights_management DRM]. If you're running a personal copy you are restricted to a demo version (no saving - though there is a work around). Later versions (6.1+) have dropped the USB dongle requirement but can't communicate with our laser cutter directly.

==== Downloads ====

''LaserCut 5.3'' ([https://docs.google.com/uc?export=download&id=0B7yyT7cWvyTVS0FZRnlvenJtRHc Google Drive], [http://www.leetro.com/english/down/productcatalog2015/SoftwareDriver/MPC6565/LaserCut5.3(V4408)-Installer.rar Direct from Leetro]) for Windows Paid, Demo 
:The full version, but requires a special SenseLock USB Dongle to be connected to the PC running it or the software is limited to a demo mode (which is still useful for familiarizing yourself with the program). :This version is needed in order to communicate with our laser cutter, as 6.1 doesn't support ours.

''LaserCut 6.1'' ([https://docs.google.com/uc?export=download&id=0B7yyT7cWvyTVMVR4RklNLVkyaFk Google Drive], [http://www.leetro.com/english/down/productcatalog2015/SoftwareDriver/MPC6585/LaserCut61%20(MPC6585)%20Installer.rar Direct from Leetro]) for Windows Free 
:Not directly compatible with our laser cutter but has no USB dongle requirement, is fully functional aside from not being able to communicate with our laser cutter. Can still be used to prepare files for the earlier version of LaserCut ([[#Downloads|5.3]]). Both versions of LaserCut can be installed at the same time making this version a great option too.

''123D Make'' ([http://www.123dapp.com/make Direct from Autodesk]) for Windows, Mac, iPad/iPhone Free 
:A program for converting 3D models into pieces which can be laser cut & attached together to form a fully 3D model out of laser cut materials ([http://imgur.com/AnC8UJA example]).

''Pepakura Designer'' ([http://www.tamasoft.co.jp/pepakura-en/ Direct from Tama Software]) for Windows Paid, Demo 
:A program for converting 3D models into origami style pages which can be printed, cut out by hand &/or laser cut, then folded to form a 3D object ([http://www.tamasoft.co.jp/pepakura-en/gallery/list.php examples]).

=== Resources ===

The [https://drive.google.com/file/d/0B8eerfv68EE4eWNVRWRZX0FzY0k/view Powerpoint Presentation] that is shown as part of the laser certification process (December 8, 2015), useful as a refresher once you've completed your [[Laser_Certification|certification]].

[http://templatemaker.nl/ TemplateMaker], a very useful Online tool for generating various custom boxes & shapes that can be cut on the laser.

[http://www.wolfiesden.com/Laser/PuzzleCreator.asp Wolfie's SVG Puzzle Generator], exports a randomly generated puzzle in SVG format which can be converted to DXF and then laser cut out of something (in order to make personalized puzzles).

[http://www.makercase.com/ MakerCase], generates a proper box with the option to set the thickness of the material & pick which style of joints to use.

{{Warning|It is imperative that you do a [[Chlorine Test]] on unapproved materials before working on them with the Laser Cutter}}

==Specs==

* Controller: [http://www.leetro.com/english/sale/1-2.html Leetro MPC 6525A]
* 80 watt
* 4x3' CNC bed
* Front shield can be dropped to insert pieces longer than 3'
* Water cooled & Ducted
* Can cut or etch up to 1/2" thick light materials such as woods and some plastics
* Cannot cut any chlorinated synthetics (some types of plastics & rubbers)

==Usage Notes==
* Complete [[Laser Certification]] to learn how to use the laser. Training is offered about once a month.
* Perform a simple [[Chlorine Test]] on unapproved materials, as cutting or etching chlorinated materials damages the optics
* See [[Power Levels]] page for notes and details on cutting and etching various materials
* Power modulation is in a restricted range in the software due to a firmware bug (Approximately 8%-30% represents 0%-100% power)
* Controller occasionally locks up after large cut jobs. E-stop immediately if job timer does not increment in first 5 seconds of job. Post to list for recovery instructions
* Consult our [[Laser Standard Operating Procedure]]

==History==

* Originally on loan for 6 months (ending Aug 2012) in exchange for Protospace performing repairs.
** Loan has been extended.

==Repairs Needed==

*Upgrades discussed
**Adding air cooling to optics and laser head block
**Convincing power supply to modulate power levels properly
**Seal display on controller to prevent smoke from clouding over time.
**Replace and upgrade chiller (current chiller struggles to keep up with heat generated, and has no safeties on it to signal failure)
**Relocate chiller to an open-air position (wall mounted)

==Repair History==

Break-Fix log:
*Current status: DOWN
*2016-11-24 - DOWN: Laser tube replaced, chiller pump is broken.
*2016-11-13 - DOWN: Two new laser tubes ordered from the an American source.
*2016-11-11 - DOWN: Chiller failure. Laser tube destroyed.
*2016-11-07 - UP: Laser tube replaced with an aging, but unused tube that was donated from a scrap laser
*2016-11-06 - DOWN: Chiller failure. Laser tube destroyed (overheated and glass cracked)

Regular maintenance log:

Laser cutter, large (Rabbit Laser RL-80-1290) ID:6

2016-12-02T17:50:27Z

Matt Mulrrooney: /* Repair History */

{{#evt:
service=youtube
|id=https://www.youtube.com/watch?v=29YLiiapFHc
|alignment=right
}}

{{Equipment page
| toolname=Laser Cutter
| model=[http://www.rabbitlaserusa.com/laser_RL1290.html Rabbit Laser USA RL-80-1290] (where RL is the factory code, 80 is the original laser power in watts, and 1290 is the bed size)
| serial=??
| owner=Brian Queen
| loanstatus=Semi-Permanent Loan
| arrived=Before 2013
| location=Bay 108, near the door to the front rooms
| status=Down. Replacement laser tube is enroute and expected by Dec 10, 2016.
| permission=Members & Friends Only
| certification=Must complete [[Laser Certification]]
| id=6
| itemphoto=[[File:6.jpg|500px|thumb|right|The large laser cutter, with its lid open and a piece of material on the bed. The laser cutter's computer is on the right side, with its monitor, keyboard, and mouse on top of the laser cutter's body. The tray of laser cutting tools and samples is on top of its body on the other side. The chiller is visible on the bottom shelf, along with some supplies. The [[vacuum cart]] is visible in the background on the left, with the [[Bay 108 electrical panels]] on the wall behind; that space is now occupied by the [[pinball machine (Road Kings)|pinball machine]], while the vacuum cart is in Bay 110.]]
}}

[[Category:Showcase tools]]
[[Category:Plasticworking tools]]
[[Category:Woodworking tools]]
[[Category:Textileworking tools]]
[[Category:Computer-controlled tools]]

__TOC__

Arguably the most popular tool at Protospace, the '''Laser Cutter''' uses a CO2 laser to cut & engrave a variety of non-metal materials (though some metals can be engraved).

=== Software ===
We currently have '''LaserCut 6.0''' installed on the computer connected to the Laser Cutter. Unfortunately LaserCut 6.0 requires a USB dongle to be hooked up to the PC at all times as a form of [https://en.wikipedia.org/wiki/Digital_rights_management DRM]. If you're running a personal copy you are restricted to a demo version (no saving - though there is a work around). Later versions (6.1+) have dropped the USB dongle requirement but can't communicate with our laser cutter directly.

==== Downloads ====

''LaserCut 5.3'' ([https://docs.google.com/uc?export=download&id=0B7yyT7cWvyTVS0FZRnlvenJtRHc Google Drive], [http://www.leetro.com/english/down/productcatalog2015/SoftwareDriver/MPC6565/LaserCut5.3(V4408)-Installer.rar Direct from Leetro]) for Windows Paid, Demo 
:The full version, but requires a special SenseLock USB Dongle to be connected to the PC running it or the software is limited to a demo mode (which is still useful for familiarizing yourself with the program). :This version is needed in order to communicate with our laser cutter, as 6.1 doesn't support ours.

''LaserCut 6.1'' ([https://docs.google.com/uc?export=download&id=0B7yyT7cWvyTVMVR4RklNLVkyaFk Google Drive], [http://www.leetro.com/english/down/productcatalog2015/SoftwareDriver/MPC6585/LaserCut61%20(MPC6585)%20Installer.rar Direct from Leetro]) for Windows Free 
:Not directly compatible with our laser cutter but has no USB dongle requirement, is fully functional aside from not being able to communicate with our laser cutter. Can still be used to prepare files for the earlier version of LaserCut ([[#Downloads|5.3]]). Both versions of LaserCut can be installed at the same time making this version a great option too.

''123D Make'' ([http://www.123dapp.com/make Direct from Autodesk]) for Windows, Mac, iPad/iPhone Free 
:A program for converting 3D models into pieces which can be laser cut & attached together to form a fully 3D model out of laser cut materials ([http://imgur.com/AnC8UJA example]).

''Pepakura Designer'' ([http://www.tamasoft.co.jp/pepakura-en/ Direct from Tama Software]) for Windows Paid, Demo 
:A program for converting 3D models into origami style pages which can be printed, cut out by hand &/or laser cut, then folded to form a 3D object ([http://www.tamasoft.co.jp/pepakura-en/gallery/list.php examples]).

=== Resources ===

The [https://drive.google.com/file/d/0B8eerfv68EE4eWNVRWRZX0FzY0k/view Powerpoint Presentation] that is shown as part of the laser certification process (December 8, 2015), useful as a refresher once you've completed your [[Laser_Certification|certification]].

[http://templatemaker.nl/ TemplateMaker], a very useful Online tool for generating various custom boxes & shapes that can be cut on the laser.

[http://www.wolfiesden.com/Laser/PuzzleCreator.asp Wolfie's SVG Puzzle Generator], exports a randomly generated puzzle in SVG format which can be converted to DXF and then laser cut out of something (in order to make personalized puzzles).

[http://www.makercase.com/ MakerCase], generates a proper box with the option to set the thickness of the material & pick which style of joints to use.

{{Warning|It is imperative that you do a [[Chlorine Test]] on unapproved materials before working on them with the Laser Cutter}}

==Specs==

* Controller: [http://www.leetro.com/english/sale/1-2.html Leetro MPC 6525A]
* 80 watt
* 4x3' CNC bed
* Front shield can be dropped to insert pieces longer than 3'
* Water cooled & Ducted
* Can cut or etch up to 1/2" thick light materials such as woods and some plastics
* Cannot cut any chlorinated synthetics (some types of plastics & rubbers)

==Usage Notes==
* Complete [[Laser Certification]] to learn how to use the laser. Training is offered about once a month.
* Perform a simple [[Chlorine Test]] on unapproved materials, as cutting or etching chlorinated materials damages the optics
* See [[Power Levels]] page for notes and details on cutting and etching various materials
* Power modulation is in a restricted range in the software due to a firmware bug (Approximately 8%-30% represents 0%-100% power)
* Controller occasionally locks up after large cut jobs. E-stop immediately if job timer does not increment in first 5 seconds of job. Post to list for recovery instructions
* Consult our [[Laser Standard Operating Procedure]]

==History==

* Originally on loan for 6 months (ending Aug 2012) in exchange for Protospace performing repairs.
** Loan has been extended.

==Repairs Needed==

*Upgrades discussed
**Adding air cooling to optics and laser head block
**Convincing power supply to modulate power levels properly
**Seal display on controller to prevent smoke from clouding over time.
**Replace and upgrade chiller (current chiller struggles to keep up with heat generated, and has no safeties on it to signal failure)
**Relocate chiller to an open-air position (wall mounted)

==Repair History==

Break/Fix log:
*Current status: DOWN
*2016-11-24 - DOWN: Laser tube replaced, chiller pump is broken.
*2016-11-13 - DOWN: Two new laser tubes ordered from the an American source.
*2016-11-11 - DOWN: Chiller failure. Laser tube destroyed.
*2016-11-07 - UP: Laser tube replaced with an aging, but unused tube that was donated from a scrap laser
*2016-11-06 - DOWN: Chiller failure. Laser tube destroyed (overheated and glass cracked)

Regular maintenance log:

Laser cutter, large (Rabbit Laser RL-80-1290) ID:6

2016-12-02T17:46:01Z

Matt Mulrrooney: /* Repair History */

{{#evt:
service=youtube
|id=https://www.youtube.com/watch?v=29YLiiapFHc
|alignment=right
}}

{{Equipment page
| toolname=Laser Cutter
| model=[http://www.rabbitlaserusa.com/laser_RL1290.html Rabbit Laser USA RL-80-1290] (where RL is the factory code, 80 is the original laser power in watts, and 1290 is the bed size)
| serial=??
| owner=Brian Queen
| loanstatus=Semi-Permanent Loan
| arrived=Before 2013
| location=Bay 108, near the door to the front rooms
| status=Down. Replacement laser tube is enroute and expected by Dec 10, 2016.
| permission=Members & Friends Only
| certification=Must complete [[Laser Certification]]
| id=6
| itemphoto=[[File:6.jpg|500px|thumb|right|The large laser cutter, with its lid open and a piece of material on the bed. The laser cutter's computer is on the right side, with its monitor, keyboard, and mouse on top of the laser cutter's body. The tray of laser cutting tools and samples is on top of its body on the other side. The chiller is visible on the bottom shelf, along with some supplies. The [[vacuum cart]] is visible in the background on the left, with the [[Bay 108 electrical panels]] on the wall behind; that space is now occupied by the [[pinball machine (Road Kings)|pinball machine]], while the vacuum cart is in Bay 110.]]
}}

[[Category:Showcase tools]]
[[Category:Plasticworking tools]]
[[Category:Woodworking tools]]
[[Category:Textileworking tools]]
[[Category:Computer-controlled tools]]

__TOC__

Arguably the most popular tool at Protospace, the '''Laser Cutter''' uses a CO2 laser to cut & engrave a variety of non-metal materials (though some metals can be engraved).

=== Software ===
We currently have '''LaserCut 6.0''' installed on the computer connected to the Laser Cutter. Unfortunately LaserCut 6.0 requires a USB dongle to be hooked up to the PC at all times as a form of [https://en.wikipedia.org/wiki/Digital_rights_management DRM]. If you're running a personal copy you are restricted to a demo version (no saving - though there is a work around). Later versions (6.1+) have dropped the USB dongle requirement but can't communicate with our laser cutter directly.

==== Downloads ====

''LaserCut 5.3'' ([https://docs.google.com/uc?export=download&id=0B7yyT7cWvyTVS0FZRnlvenJtRHc Google Drive], [http://www.leetro.com/english/down/productcatalog2015/SoftwareDriver/MPC6565/LaserCut5.3(V4408)-Installer.rar Direct from Leetro]) for Windows Paid, Demo 
:The full version, but requires a special SenseLock USB Dongle to be connected to the PC running it or the software is limited to a demo mode (which is still useful for familiarizing yourself with the program). :This version is needed in order to communicate with our laser cutter, as 6.1 doesn't support ours.

''LaserCut 6.1'' ([https://docs.google.com/uc?export=download&id=0B7yyT7cWvyTVMVR4RklNLVkyaFk Google Drive], [http://www.leetro.com/english/down/productcatalog2015/SoftwareDriver/MPC6585/LaserCut61%20(MPC6585)%20Installer.rar Direct from Leetro]) for Windows Free 
:Not directly compatible with our laser cutter but has no USB dongle requirement, is fully functional aside from not being able to communicate with our laser cutter. Can still be used to prepare files for the earlier version of LaserCut ([[#Downloads|5.3]]). Both versions of LaserCut can be installed at the same time making this version a great option too.

''123D Make'' ([http://www.123dapp.com/make Direct from Autodesk]) for Windows, Mac, iPad/iPhone Free 
:A program for converting 3D models into pieces which can be laser cut & attached together to form a fully 3D model out of laser cut materials ([http://imgur.com/AnC8UJA example]).

''Pepakura Designer'' ([http://www.tamasoft.co.jp/pepakura-en/ Direct from Tama Software]) for Windows Paid, Demo 
:A program for converting 3D models into origami style pages which can be printed, cut out by hand &/or laser cut, then folded to form a 3D object ([http://www.tamasoft.co.jp/pepakura-en/gallery/list.php examples]).

=== Resources ===

The [https://drive.google.com/file/d/0B8eerfv68EE4eWNVRWRZX0FzY0k/view Powerpoint Presentation] that is shown as part of the laser certification process (December 8, 2015), useful as a refresher once you've completed your [[Laser_Certification|certification]].

[http://templatemaker.nl/ TemplateMaker], a very useful Online tool for generating various custom boxes & shapes that can be cut on the laser.

[http://www.wolfiesden.com/Laser/PuzzleCreator.asp Wolfie's SVG Puzzle Generator], exports a randomly generated puzzle in SVG format which can be converted to DXF and then laser cut out of something (in order to make personalized puzzles).

[http://www.makercase.com/ MakerCase], generates a proper box with the option to set the thickness of the material & pick which style of joints to use.

{{Warning|It is imperative that you do a [[Chlorine Test]] on unapproved materials before working on them with the Laser Cutter}}

==Specs==

* Controller: [http://www.leetro.com/english/sale/1-2.html Leetro MPC 6525A]
* 80 watt
* 4x3' CNC bed
* Front shield can be dropped to insert pieces longer than 3'
* Water cooled & Ducted
* Can cut or etch up to 1/2" thick light materials such as woods and some plastics
* Cannot cut any chlorinated synthetics (some types of plastics & rubbers)

==Usage Notes==
* Complete [[Laser Certification]] to learn how to use the laser. Training is offered about once a month.
* Perform a simple [[Chlorine Test]] on unapproved materials, as cutting or etching chlorinated materials damages the optics
* See [[Power Levels]] page for notes and details on cutting and etching various materials
* Power modulation is in a restricted range in the software due to a firmware bug (Approximately 8%-30% represents 0%-100% power)
* Controller occasionally locks up after large cut jobs. E-stop immediately if job timer does not increment in first 5 seconds of job. Post to list for recovery instructions
* Consult our [[Laser Standard Operating Procedure]]

==History==

* Originally on loan for 6 months (ending Aug 2012) in exchange for Protospace performing repairs.
** Loan has been extended.

==Repairs Needed==

*Upgrades discussed
**Adding air cooling to optics and laser head block
**Convincing power supply to modulate power levels properly
**Seal display on controller to prevent smoke from clouding over time.
**Replace and upgrade chiller (current chiller struggles to keep up with heat generated, and has no safeties on it to signal failure)
**Relocate chiller to an open-air position (wall mounted)

==Repair History==

*Break/Fix log
** Current status: DOWN
**Nov 24, 2016 - DOWN: Laser tube replaced, chiller pump is broken
**Nov 13, 2016 - DOWN: Two new laser tubes ordered from the US.
**Nov 11, 2016 - DOWN: Chiller failure caused laser tube failure and destruction
**Nov 7, 2016 - UP: Laser tube replaced with an aging, but unused tube that was donated from a scrap laser
**Nov 6, 2016 - DOWN: Chiller failure. Laser tube destroyed (overheated and glass cracked)

*Regular maintenance log

Laser cutter, large (Rabbit Laser RL-80-1290) ID:6

2016-12-02T17:45:41Z

Matt Mulrrooney:

{{#evt:
service=youtube
|id=https://www.youtube.com/watch?v=29YLiiapFHc
|alignment=right
}}

{{Equipment page
| toolname=Laser Cutter
| model=[http://www.rabbitlaserusa.com/laser_RL1290.html Rabbit Laser USA RL-80-1290] (where RL is the factory code, 80 is the original laser power in watts, and 1290 is the bed size)
| serial=??
| owner=Brian Queen
| loanstatus=Semi-Permanent Loan
| arrived=Before 2013
| location=Bay 108, near the door to the front rooms
| status=Down. Replacement laser tube is enroute and expected by Dec 10, 2016.
| permission=Members & Friends Only
| certification=Must complete [[Laser Certification]]
| id=6
| itemphoto=[[File:6.jpg|500px|thumb|right|The large laser cutter, with its lid open and a piece of material on the bed. The laser cutter's computer is on the right side, with its monitor, keyboard, and mouse on top of the laser cutter's body. The tray of laser cutting tools and samples is on top of its body on the other side. The chiller is visible on the bottom shelf, along with some supplies. The [[vacuum cart]] is visible in the background on the left, with the [[Bay 108 electrical panels]] on the wall behind; that space is now occupied by the [[pinball machine (Road Kings)|pinball machine]], while the vacuum cart is in Bay 110.]]
}}

[[Category:Showcase tools]]
[[Category:Plasticworking tools]]
[[Category:Woodworking tools]]
[[Category:Textileworking tools]]
[[Category:Computer-controlled tools]]

__TOC__

Arguably the most popular tool at Protospace, the '''Laser Cutter''' uses a CO2 laser to cut & engrave a variety of non-metal materials (though some metals can be engraved).

=== Software ===
We currently have '''LaserCut 6.0''' installed on the computer connected to the Laser Cutter. Unfortunately LaserCut 6.0 requires a USB dongle to be hooked up to the PC at all times as a form of [https://en.wikipedia.org/wiki/Digital_rights_management DRM]. If you're running a personal copy you are restricted to a demo version (no saving - though there is a work around). Later versions (6.1+) have dropped the USB dongle requirement but can't communicate with our laser cutter directly.

==== Downloads ====

''LaserCut 5.3'' ([https://docs.google.com/uc?export=download&id=0B7yyT7cWvyTVS0FZRnlvenJtRHc Google Drive], [http://www.leetro.com/english/down/productcatalog2015/SoftwareDriver/MPC6565/LaserCut5.3(V4408)-Installer.rar Direct from Leetro]) for Windows Paid, Demo 
:The full version, but requires a special SenseLock USB Dongle to be connected to the PC running it or the software is limited to a demo mode (which is still useful for familiarizing yourself with the program). :This version is needed in order to communicate with our laser cutter, as 6.1 doesn't support ours.

''LaserCut 6.1'' ([https://docs.google.com/uc?export=download&id=0B7yyT7cWvyTVMVR4RklNLVkyaFk Google Drive], [http://www.leetro.com/english/down/productcatalog2015/SoftwareDriver/MPC6585/LaserCut61%20(MPC6585)%20Installer.rar Direct from Leetro]) for Windows Free 
:Not directly compatible with our laser cutter but has no USB dongle requirement, is fully functional aside from not being able to communicate with our laser cutter. Can still be used to prepare files for the earlier version of LaserCut ([[#Downloads|5.3]]). Both versions of LaserCut can be installed at the same time making this version a great option too.

''123D Make'' ([http://www.123dapp.com/make Direct from Autodesk]) for Windows, Mac, iPad/iPhone Free 
:A program for converting 3D models into pieces which can be laser cut & attached together to form a fully 3D model out of laser cut materials ([http://imgur.com/AnC8UJA example]).

''Pepakura Designer'' ([http://www.tamasoft.co.jp/pepakura-en/ Direct from Tama Software]) for Windows Paid, Demo 
:A program for converting 3D models into origami style pages which can be printed, cut out by hand &/or laser cut, then folded to form a 3D object ([http://www.tamasoft.co.jp/pepakura-en/gallery/list.php examples]).

=== Resources ===

The [https://drive.google.com/file/d/0B8eerfv68EE4eWNVRWRZX0FzY0k/view Powerpoint Presentation] that is shown as part of the laser certification process (December 8, 2015), useful as a refresher once you've completed your [[Laser_Certification|certification]].

[http://templatemaker.nl/ TemplateMaker], a very useful Online tool for generating various custom boxes & shapes that can be cut on the laser.

[http://www.wolfiesden.com/Laser/PuzzleCreator.asp Wolfie's SVG Puzzle Generator], exports a randomly generated puzzle in SVG format which can be converted to DXF and then laser cut out of something (in order to make personalized puzzles).

[http://www.makercase.com/ MakerCase], generates a proper box with the option to set the thickness of the material & pick which style of joints to use.

{{Warning|It is imperative that you do a [[Chlorine Test]] on unapproved materials before working on them with the Laser Cutter}}

==Specs==

* Controller: [http://www.leetro.com/english/sale/1-2.html Leetro MPC 6525A]
* 80 watt
* 4x3' CNC bed
* Front shield can be dropped to insert pieces longer than 3'
* Water cooled & Ducted
* Can cut or etch up to 1/2" thick light materials such as woods and some plastics
* Cannot cut any chlorinated synthetics (some types of plastics & rubbers)

==Usage Notes==
* Complete [[Laser Certification]] to learn how to use the laser. Training is offered about once a month.
* Perform a simple [[Chlorine Test]] on unapproved materials, as cutting or etching chlorinated materials damages the optics
* See [[Power Levels]] page for notes and details on cutting and etching various materials
* Power modulation is in a restricted range in the software due to a firmware bug (Approximately 8%-30% represents 0%-100% power)
* Controller occasionally locks up after large cut jobs. E-stop immediately if job timer does not increment in first 5 seconds of job. Post to list for recovery instructions
* Consult our [[Laser Standard Operating Procedure]]

==History==

* Originally on loan for 6 months (ending Aug 2012) in exchange for Protospace performing repairs.
** Loan has been extended.

==Repairs Needed==

*Upgrades discussed
**Adding air cooling to optics and laser head block
**Convincing power supply to modulate power levels properly
**Seal display on controller to prevent smoke from clouding over time.
**Replace and upgrade chiller (current chiller struggles to keep up with heat generated, and has no safeties on it to signal failure)
**Relocate chiller to an open-air position (wall mounted)

==Repair History==

*Break/Fix log
** Current status: DOWN

**Nov 24, 2016 - DOWN: Laser tube replaced, chiller pump is broken
**Nov 13, 2016 - DOWN: Two new laser tubes ordered from the US.
**Nov 11, 2016 - DOWN: Chiller failure caused laser tube failure and destruction
**Nov 7, 2016 - UP: Laser tube replaced with an aging, but unused tube that was donated from a scrap laser
**Nov 6, 2016 - DOWN: Chiller failure. Laser tube destroyed (overheated and glass cracked)

*Regular maintenance log

Laser cutter, large (Rabbit Laser RL-80-1290) ID:6

2016-12-02T17:31:55Z

Matt Mulrrooney: /* Repairs Needed */

{{#evt:
service=youtube
|id=https://www.youtube.com/watch?v=29YLiiapFHc
|alignment=right
}}

{{Equipment page
| toolname=Laser Cutter
| model=[http://www.rabbitlaserusa.com/laser_RL1290.html Rabbit Laser USA RL-80-1290] (where RL is the factory code, 80 is the original laser power in watts, and 1290 is the bed size)
| serial=??
| owner=Brian Queen
| loanstatus=Semi-Permanent Loan
| arrived=Before 2013
| location=Bay 108, near the door to the front rooms
| status=Down. Replacement laser tube is enroute and expected by Dec 10, 2016.
| permission=Members & Friends Only
| certification=Must complete [[Laser Certification]]
| id=6
| itemphoto=[[File:6.jpg|500px|thumb|right|The large laser cutter, with its lid open and a piece of material on the bed. The laser cutter's computer is on the right side, with its monitor, keyboard, and mouse on top of the laser cutter's body. The tray of laser cutting tools and samples is on top of its body on the other side. The chiller is visible on the bottom shelf, along with some supplies. The [[vacuum cart]] is visible in the background on the left, with the [[Bay 108 electrical panels]] on the wall behind; that space is now occupied by the [[pinball machine (Road Kings)|pinball machine]], while the vacuum cart is in Bay 110.]]
}}

[[Category:Showcase tools]]
[[Category:Plasticworking tools]]
[[Category:Woodworking tools]]
[[Category:Textileworking tools]]
[[Category:Computer-controlled tools]]

__TOC__

Arguably the most popular tool at Protospace, the '''Laser Cutter''' uses a CO2 laser to cut & engrave a variety of non-metal materials (though some metals can be engraved).

=== Software ===
We currently have '''LaserCut 6.0''' installed on the computer connected to the Laser Cutter. Unfortunately LaserCut 6.0 requires a USB dongle to be hooked up to the PC at all times as a form of [https://en.wikipedia.org/wiki/Digital_rights_management DRM]. If you're running a personal copy you are restricted to a demo version (no saving - though there is a work around). Later versions (6.1+) have dropped the USB dongle requirement but can't communicate with our laser cutter directly.

==== Downloads ====

''LaserCut 5.3'' ([https://docs.google.com/uc?export=download&id=0B7yyT7cWvyTVS0FZRnlvenJtRHc Google Drive], [http://www.leetro.com/english/down/productcatalog2015/SoftwareDriver/MPC6565/LaserCut5.3(V4408)-Installer.rar Direct from Leetro]) for Windows Paid, Demo 
:The full version, but requires a special SenseLock USB Dongle to be connected to the PC running it or the software is limited to a demo mode (which is still useful for familiarizing yourself with the program). :This version is needed in order to communicate with our laser cutter, as 6.1 doesn't support ours.

''LaserCut 6.1'' ([https://docs.google.com/uc?export=download&id=0B7yyT7cWvyTVMVR4RklNLVkyaFk Google Drive], [http://www.leetro.com/english/down/productcatalog2015/SoftwareDriver/MPC6585/LaserCut61%20(MPC6585)%20Installer.rar Direct from Leetro]) for Windows Free 
:Not directly compatible with our laser cutter but has no USB dongle requirement, is fully functional aside from not being able to communicate with our laser cutter. Can still be used to prepare files for the earlier version of LaserCut ([[#Downloads|5.3]]). Both versions of LaserCut can be installed at the same time making this version a great option too.

''123D Make'' ([http://www.123dapp.com/make Direct from Autodesk]) for Windows, Mac, iPad/iPhone Free 
:A program for converting 3D models into pieces which can be laser cut & attached together to form a fully 3D model out of laser cut materials ([http://imgur.com/AnC8UJA example]).

''Pepakura Designer'' ([http://www.tamasoft.co.jp/pepakura-en/ Direct from Tama Software]) for Windows Paid, Demo 
:A program for converting 3D models into origami style pages which can be printed, cut out by hand &/or laser cut, then folded to form a 3D object ([http://www.tamasoft.co.jp/pepakura-en/gallery/list.php examples]).

=== Resources ===

The [https://drive.google.com/file/d/0B8eerfv68EE4eWNVRWRZX0FzY0k/view Powerpoint Presentation] that is shown as part of the laser certification process (December 8, 2015), useful as a refresher once you've completed your [[Laser_Certification|certification]].

[http://templatemaker.nl/ TemplateMaker], a very useful Online tool for generating various custom boxes & shapes that can be cut on the laser.

[http://www.wolfiesden.com/Laser/PuzzleCreator.asp Wolfie's SVG Puzzle Generator], exports a randomly generated puzzle in SVG format which can be converted to DXF and then laser cut out of something (in order to make personalized puzzles).

[http://www.makercase.com/ MakerCase], generates a proper box with the option to set the thickness of the material & pick which style of joints to use.

{{Warning|It is imperative that you do a [[Chlorine Test]] on unapproved materials before working on them with the Laser Cutter}}

==Specs==

* Controller: [http://www.leetro.com/english/sale/1-2.html Leetro MPC 6525A]
* 80 watt
* 4x3' CNC bed
* Front shield can be dropped to insert pieces longer than 3'
* Water cooled & Ducted
* Can cut or etch up to 1/2" thick light materials such as woods and some plastics
* Cannot cut any chlorinated synthetics (some types of plastics & rubbers)

==Usage Notes==
* Complete [[Laser Certification]] to learn how to use the laser. Training is offered about once a month.
* Perform a simple [[Chlorine Test]] on unapproved materials, as cutting or etching chlorinated materials damages the optics
* See [[Power Levels]] page for notes and details on cutting and etching various materials
* Power modulation is in a restricted range in the software due to a firmware bug (Approximately 8%-30% represents 0%-100% power)
* Controller occasionally locks up after large cut jobs. E-stop immediately if job timer does not increment in first 5 seconds of job. Post to list for recovery instructions
* Consult our [[Laser Standard Operating Procedure]]

==History==

* Originally on loan for 6 months (ending Aug 2012) in exchange for Protospace performing repairs.
** Loan has been extended.

==Repairs Needed==

*Upgrades discussed
**Adding air cooling to optics and laser head block
**Convincing power supply to modulate power levels properly
**Seal display on controller to prevent smoke from clouding over time.
**Replace and upgrade chiller (current chiller struggles to keep up with heat generated, and has no safeties on it to signal failure)
**Relocate chiller to an open-air position (wall mounted)

Laser cutter, large (Rabbit Laser RL-80-1290) ID:6

2016-11-20T09:36:59Z

Matt Mulrrooney:

{{#evt:
service=youtube
|id=https://www.youtube.com/watch?v=29YLiiapFHc
|alignment=right
}}

{{Equipment page
|toolname=Laser Cutter
|model=[http://www.rabbitlaserusa.com/laser_RL1290.html Rabbit Laser USA RL-80-1290] (where RL is the factory code, 80 is the original laser power in watts, and 1290 is the bed size)
|serial=??
|owner=Brian Queen
|loanstatus=Semi-Permanent Loan
|arrived=Before 2013
|location=Bay 108, near the door to the front rooms
|status=Down. Replacement laser tube is enroute and expected by Dec 10, 2016.
|permission=Members & Friends Only
|certification=Must complete [[Laser Certification]]
|itemphoto=[[File:Laser cutter, open.jpg|500px|thumb|right|The large laser cutter, with its lid open and a piece of material on the bed. The laser cutter's computer is on the right side, with its monitor, keyboard, and mouse on top of the laser cutter's body. The tray of laser cutting tools and samples is on top of its body on the other side. The chiller is visible on the bottom shelf, along with some supplies. The [[vacuum cart]] is visible in the background on the left, with the [[Bay 108 electrical panels]] on the wall behind; that space is now occupied by the [[pinball machine (Road Kings)|pinball machine]], while the vacuum cart is in Bay 110.]]
}}

[[Category:Showcase tools]]
[[Category:Plasticworking tools]]
[[Category:Woodworking tools]]
[[Category:Textileworking tools]]
[[Category:Computer-controlled tools]]

__TOC__

Arguably the most popular tool at Protospace, the '''Laser Cutter''' uses a CO2 laser to cut & engrave a variety of non-metal materials (though some metals can be engraved).

=== Software ===
We currently have '''LaserCut 6.0''' installed on the computer connected to the Laser Cutter. Unfortunately LaserCut 6.0 requires a USB dongle to be hooked up to the PC at all times as a form of [https://en.wikipedia.org/wiki/Digital_rights_management DRM]. If you're running a personal copy you are restricted to a demo version (no saving - though there is a work around). Later versions (6.1+) have dropped the USB dongle requirement but can't communicate with our laser cutter directly.

==== Downloads ====

''LaserCut 5.3'' ([https://docs.google.com/uc?export=download&id=0B7yyT7cWvyTVS0FZRnlvenJtRHc Google Drive], [http://www.leetro.com/english/down/productcatalog2015/SoftwareDriver/MPC6565/LaserCut5.3(V4408)-Installer.rar Direct from Leetro]) for Windows Paid, Demo 
:The full version, but requires a special SenseLock USB Dongle to be connected to the PC running it or the software is limited to a demo mode (which is still useful for familiarizing yourself with the program). :This version is needed in order to communicate with our laser cutter, as 6.1 doesn't support ours.

''LaserCut 6.1'' ([https://docs.google.com/uc?export=download&id=0B7yyT7cWvyTVMVR4RklNLVkyaFk Google Drive], [http://www.leetro.com/english/down/productcatalog2015/SoftwareDriver/MPC6585/LaserCut61%20(MPC6585)%20Installer.rar Direct from Leetro]) for Windows Free 
:Not directly compatible with our laser cutter but has no USB dongle requirement, is fully functional aside from not being able to communicate with our laser cutter. Can still be used to prepare files for the earlier version of LaserCut ([[#Downloads|5.3]]). Both versions of LaserCut can be installed at the same time making this version a great option too.

''123D Make'' ([http://www.123dapp.com/make Direct from Autodesk]) for Windows, Mac, iPad/iPhone Free 
:A program for converting 3D models into pieces which can be laser cut & attached together to form a fully 3D model out of laser cut materials ([http://imgur.com/AnC8UJA example]).

''Pepakura Designer'' ([http://www.tamasoft.co.jp/pepakura-en/ Direct from Tama Software]) for Windows Paid, Demo 
:A program for converting 3D models into origami style pages which can be printed, cut out by hand &/or laser cut, then folded to form a 3D object ([http://www.tamasoft.co.jp/pepakura-en/gallery/list.php examples]).

=== Resources ===

The [https://drive.google.com/file/d/0B8eerfv68EE4eWNVRWRZX0FzY0k/view Powerpoint Presentation] that is shown as part of the laser certification process (December 8, 2015), useful as a refresher once you've completed your [[Laser_Certification|certification]].

[http://templatemaker.nl/ TemplateMaker], a very useful Online tool for generating various custom boxes & shapes that can be cut on the laser.

[http://www.wolfiesden.com/Laser/PuzzleCreator.asp Wolfie's SVG Puzzle Generator], exports a randomly generated puzzle in SVG format which can be converted to DXF and then laser cut out of something (in order to make personalized puzzles).

[http://www.makercase.com/ MakerCase], generates a proper box with the option to set the thickness of the material & pick which style of joints to use.

{{Warning|It is imperative that you do a [[Chlorine Test]] on unapproved materials before working on them with the Laser Cutter}}

==Specs==

* Controller: [http://www.leetro.com/english/sale/1-2.html Leetro MPC 6525A]
* 80 watt
* 4x3' CNC bed
* Front shield can be dropped to insert pieces longer than 3'
* Water cooled & Ducted
* Can cut or etch up to 1/2" thick light materials such as woods and some plastics
* Cannot cut any chlorinated synthetics (some types of plastics & rubbers)

==Usage Notes==
* Complete [[Laser Certification]] to learn how to use the laser. Training is offered about once a month.
* Perform a simple [[Chlorine Test]] on unapproved materials, as cutting or etching chlorinated materials damages the optics
* See [[Power Levels]] page for notes and details on cutting and etching various materials
* Power modulation is in a restricted range in the software due to a firmware bug (Approximately 8%-30% represents 0%-100% power)
* Controller occasionally locks up after large cut jobs. E-stop immediately if job timer does not increment in first 5 seconds of job. Post to list for recovery instructions
* Consult our [[Laser Standard Operating Procedure]]

==History==

* Originally on loan for 6 months (ending Aug 2012) in exchange for Protospace performing repairs.
** Loan has been extended.

==Repairs Needed==

*Upgrades discussed
**Adding air cooling to optics and laser head block
**Convincing power supply to modulate power levels properly
**Seal display on controller to prevent smoke from clouding over time.

Laser cutter, large (Rabbit Laser RL-80-1290) ID:6

2016-11-20T09:32:35Z

Matt Mulrrooney: /* Specs */

{{#evt:
service=youtube
|id=https://www.youtube.com/watch?v=29YLiiapFHc
|alignment=right
}}

{{Equipment page
|toolname=Laser Cutter
|model=[http://www.rabbitlaserusa.com/laser_RL1290.html Rabbit Laser USA RL-80-1290] (where RL is the factory code, 80 is the original laser power in watts, and 1290 is the bed size)
|serial=??
|owner=Brian Queen
|loanstatus=Semi-Permanent Loan
|arrived=Before 2013
|location=Bay 108, near the door to the front rooms
|status=Working for small jobs (Using borrowed laser tube power supply due to failure of ours. Repair in progress.)
|permission=Members & Friends Only
|certification=Must complete [[Laser Certification]]
|itemphoto=[[File:Laser cutter, open.jpg|500px|thumb|right|The large laser cutter, with its lid open and a piece of material on the bed. The laser cutter's computer is on the right side, with its monitor, keyboard, and mouse on top of the laser cutter's body. The tray of laser cutting tools and samples is on top of its body on the other side. The chiller is visible on the bottom shelf, along with some supplies. The [[vacuum cart]] is visible in the background on the left, with the [[Bay 108 electrical panels]] on the wall behind; that space is now occupied by the [[pinball machine (Road Kings)|pinball machine]], while the vacuum cart is in Bay 110.]]
}}

[[Category:Showcase tools]]
[[Category:Plasticworking tools]]
[[Category:Woodworking tools]]
[[Category:Textileworking tools]]
[[Category:Computer-controlled tools]]

__TOC__

Arguably the most popular tool at Protospace, the '''Laser Cutter''' uses a CO2 laser to cut & engrave a variety of non-metal materials (though some metals can be engraved).

=== Software ===
We currently have '''LaserCut 6.0''' installed on the computer connected to the Laser Cutter. Unfortunately LaserCut 6.0 requires a USB dongle to be hooked up to the PC at all times as a form of [https://en.wikipedia.org/wiki/Digital_rights_management DRM]. If you're running a personal copy you are restricted to a demo version (no saving - though there is a work around). Later versions (6.1+) have dropped the USB dongle requirement but can't communicate with our laser cutter directly.

==== Downloads ====

''LaserCut 5.3'' ([https://docs.google.com/uc?export=download&id=0B7yyT7cWvyTVS0FZRnlvenJtRHc Google Drive], [http://www.leetro.com/english/down/productcatalog2015/SoftwareDriver/MPC6565/LaserCut5.3(V4408)-Installer.rar Direct from Leetro]) for Windows Paid, Demo 
:The full version, but requires a special SenseLock USB Dongle to be connected to the PC running it or the software is limited to a demo mode (which is still useful for familiarizing yourself with the program). :This version is needed in order to communicate with our laser cutter, as 6.1 doesn't support ours.

''LaserCut 6.1'' ([https://docs.google.com/uc?export=download&id=0B7yyT7cWvyTVMVR4RklNLVkyaFk Google Drive], [http://www.leetro.com/english/down/productcatalog2015/SoftwareDriver/MPC6585/LaserCut61%20(MPC6585)%20Installer.rar Direct from Leetro]) for Windows Free 
:Not directly compatible with our laser cutter but has no USB dongle requirement, is fully functional aside from not being able to communicate with our laser cutter. Can still be used to prepare files for the earlier version of LaserCut ([[#Downloads|5.3]]). Both versions of LaserCut can be installed at the same time making this version a great option too.

''123D Make'' ([http://www.123dapp.com/make Direct from Autodesk]) for Windows, Mac, iPad/iPhone Free 
:A program for converting 3D models into pieces which can be laser cut & attached together to form a fully 3D model out of laser cut materials ([http://imgur.com/AnC8UJA example]).

''Pepakura Designer'' ([http://www.tamasoft.co.jp/pepakura-en/ Direct from Tama Software]) for Windows Paid, Demo 
:A program for converting 3D models into origami style pages which can be printed, cut out by hand &/or laser cut, then folded to form a 3D object ([http://www.tamasoft.co.jp/pepakura-en/gallery/list.php examples]).

=== Resources ===

The [https://drive.google.com/file/d/0B8eerfv68EE4eWNVRWRZX0FzY0k/view Powerpoint Presentation] that is shown as part of the laser certification process (December 8, 2015), useful as a refresher once you've completed your [[Laser_Certification|certification]].

[http://templatemaker.nl/ TemplateMaker], a very useful Online tool for generating various custom boxes & shapes that can be cut on the laser.

[http://www.wolfiesden.com/Laser/PuzzleCreator.asp Wolfie's SVG Puzzle Generator], exports a randomly generated puzzle in SVG format which can be converted to DXF and then laser cut out of something (in order to make personalized puzzles).

[http://www.makercase.com/ MakerCase], generates a proper box with the option to set the thickness of the material & pick which style of joints to use.

{{Warning|It is imperative that you do a [[Chlorine Test]] on unapproved materials before working on them with the Laser Cutter}}

==Specs==

* Controller: [http://www.leetro.com/english/sale/1-2.html Leetro MPC 6525A]
* 80 watt
* 4x3' CNC bed
* Front shield can be dropped to insert pieces longer than 3'
* Water cooled & Ducted
* Can cut or etch up to 1/2" thick light materials such as woods and some plastics
* Cannot cut any chlorinated synthetics (some types of plastics & rubbers)

==Usage Notes==
* Complete [[Laser Certification]] to learn how to use the laser. Training is offered about once a month.
* Perform a simple [[Chlorine Test]] on unapproved materials, as cutting or etching chlorinated materials damages the optics
* See [[Power Levels]] page for notes and details on cutting and etching various materials
* Power modulation is in a restricted range in the software due to a firmware bug (Approximately 8%-30% represents 0%-100% power)
* Controller occasionally locks up after large cut jobs. E-stop immediately if job timer does not increment in first 5 seconds of job. Post to list for recovery instructions
* Consult our [[Laser Standard Operating Procedure]]

==History==

* Originally on loan for 6 months (ending Aug 2012) in exchange for Protospace performing repairs.
** Loan has been extended.

==Repairs Needed==

*Upgrades discussed
**Adding air cooling to optics and laser head block
**Convincing power supply to modulate power levels properly
**Seal display on controller to prevent smoke from clouding over time.

Laser cutter, large (Rabbit Laser RL-80-1290) ID:6

2016-11-20T08:57:51Z

Matt Mulrrooney: /* Software */

{{#evt:
service=youtube
|id=https://www.youtube.com/watch?v=29YLiiapFHc
|alignment=right
}}

{{Equipment page
|toolname=Laser Cutter
|model=[http://www.rabbitlaserusa.com/laser_RL1290.html Rabbit Laser USA RL-80-1290] (where RL is the factory code, 80 is the original laser power in watts, and 1290 is the bed size)
|serial=??
|owner=Brian Queen
|loanstatus=Semi-Permanent Loan
|arrived=Before 2013
|location=Bay 108, near the door to the front rooms
|status=Working for small jobs (Using borrowed laser tube power supply due to failure of ours. Repair in progress.)
|permission=Members & Friends Only
|certification=Must complete [[Laser Certification]]
|itemphoto=[[File:Laser cutter, open.jpg|500px|thumb|right|The large laser cutter, with its lid open and a piece of material on the bed. The laser cutter's computer is on the right side, with its monitor, keyboard, and mouse on top of the laser cutter's body. The tray of laser cutting tools and samples is on top of its body on the other side. The chiller is visible on the bottom shelf, along with some supplies. The [[vacuum cart]] is visible in the background on the left, with the [[Bay 108 electrical panels]] on the wall behind; that space is now occupied by the [[pinball machine (Road Kings)|pinball machine]], while the vacuum cart is in Bay 110.]]
}}

[[Category:Showcase tools]]
[[Category:Plasticworking tools]]
[[Category:Woodworking tools]]
[[Category:Textileworking tools]]
[[Category:Computer-controlled tools]]

__TOC__

Arguably the most popular tool at Protospace, the '''Laser Cutter''' uses a CO2 laser to cut & engrave a variety of non-metal materials (though some metals can be engraved).

=== Software ===
We currently have '''LaserCut 6.0''' installed on the computer connected to the Laser Cutter. Unfortunately LaserCut 6.0 requires a USB dongle to be hooked up to the PC at all times as a form of [https://en.wikipedia.org/wiki/Digital_rights_management DRM]. If you're running a personal copy you are restricted to a demo version (no saving - though there is a work around). Later versions (6.1+) have dropped the USB dongle requirement but can't communicate with our laser cutter directly.

==== Downloads ====

''LaserCut 5.3'' ([https://docs.google.com/uc?export=download&id=0B7yyT7cWvyTVS0FZRnlvenJtRHc Google Drive], [http://www.leetro.com/english/down/productcatalog2015/SoftwareDriver/MPC6565/LaserCut5.3(V4408)-Installer.rar Direct from Leetro]) for Windows Paid, Demo 
:The full version, but requires a special SenseLock USB Dongle to be connected to the PC running it or the software is limited to a demo mode (which is still useful for familiarizing yourself with the program). :This version is needed in order to communicate with our laser cutter, as 6.1 doesn't support ours.

''LaserCut 6.1'' ([https://docs.google.com/uc?export=download&id=0B7yyT7cWvyTVMVR4RklNLVkyaFk Google Drive], [http://www.leetro.com/english/down/productcatalog2015/SoftwareDriver/MPC6585/LaserCut61%20(MPC6585)%20Installer.rar Direct from Leetro]) for Windows Free 
:Not directly compatible with our laser cutter but has no USB dongle requirement, is fully functional aside from not being able to communicate with our laser cutter. Can still be used to prepare files for the earlier version of LaserCut ([[#Downloads|5.3]]). Both versions of LaserCut can be installed at the same time making this version a great option too.

''123D Make'' ([http://www.123dapp.com/make Direct from Autodesk]) for Windows, Mac, iPad/iPhone Free 
:A program for converting 3D models into pieces which can be laser cut & attached together to form a fully 3D model out of laser cut materials ([http://imgur.com/AnC8UJA example]).

''Pepakura Designer'' ([http://www.tamasoft.co.jp/pepakura-en/ Direct from Tama Software]) for Windows Paid, Demo 
:A program for converting 3D models into origami style pages which can be printed, cut out by hand &/or laser cut, then folded to form a 3D object ([http://www.tamasoft.co.jp/pepakura-en/gallery/list.php examples]).

=== Resources ===

The [https://drive.google.com/file/d/0B8eerfv68EE4eWNVRWRZX0FzY0k/view Powerpoint Presentation] that is shown as part of the laser certification process (December 8, 2015), useful as a refresher once you've completed your [[Laser_Certification|certification]].

[http://templatemaker.nl/ TemplateMaker], a very useful Online tool for generating various custom boxes & shapes that can be cut on the laser.

[http://www.wolfiesden.com/Laser/PuzzleCreator.asp Wolfie's SVG Puzzle Generator], exports a randomly generated puzzle in SVG format which can be converted to DXF and then laser cut out of something (in order to make personalized puzzles).

[http://www.makercase.com/ MakerCase], generates a proper box with the option to set the thickness of the material & pick which style of joints to use.

{{Warning|It is imperative that you do a [[Chlorine Test]] on unapproved materials before working on them with the Laser Cutter}}

==Specs==

* 80 watt
* 4x3' CNC bed
* Front shield can be dropped to insert pieces longer than 3'
* Water cooled & Ducted
* Can cut or etch up to 1/2" thick light materials such as woods and some plastics
* Cannot cut any chlorinated synthetics (some types of plastics & rubbers)

==Usage Notes==
* Complete [[Laser Certification]] to learn how to use the laser. Training is offered about once a month.
* Perform a simple [[Chlorine Test]] on unapproved materials, as cutting or etching chlorinated materials damages the optics
* See [[Power Levels]] page for notes and details on cutting and etching various materials
* Power modulation is in a restricted range in the software due to a firmware bug (Approximately 8%-30% represents 0%-100% power)
* Controller occasionally locks up after large cut jobs. E-stop immediately if job timer does not increment in first 5 seconds of job. Post to list for recovery instructions
* Consult our [[Laser Standard Operating Procedure]]

==History==

* Originally on loan for 6 months (ending Aug 2012) in exchange for Protospace performing repairs.
** Loan has been extended.

==Repairs Needed==

*Upgrades discussed
**Adding air cooling to optics and laser head block
**Convincing power supply to modulate power levels properly
**Seal display on controller to prevent smoke from clouding over time.