Protospace Wiki - User contributions [en]

How to run the PA System

2012-03-10T22:20:36Z

Ouroborosyyc:

== How to Turn on and off the PA system ==

The PA system now at Protospace is available for everyone's use. As it is a Pro Audio PA system, it's operation is a bit more involved than a simple stereo. Here's the info you need in point form...

'''To Turn ON the PA System:'''

'''1.''' Make sure the Coffin (rack) has power. There is a power bar at the bottom.

'''2.''' Plug your source into the mixer on the top "Channel 7" inputs.

'''3.''' Make sure all sliders are DOWN ie OFF.

The Speakers are all self powered:

'''4.''' Go to each speaker, and either turn on, plug in, or both. Please don't adjust any knobs on the back of the speakers.

'''5.''' The SUB also has a switch and may also need to be plugged in / turned on.

'''6.''' carefully bring up the master volume sliders. Both sliders should be at half volume

'''7.''' Start your source audio playing and carefully slide up channel 7 slider.

If you require the wireless mic, it is wired on Channel 1.

There are two switches on the mic itself. The little black switch is POWER, and the grey switch is MUTE. To use the mic, BOTH switches must be in the UP position. Once done, please remember to turn BOTH switches off to save batteries.

'''To Turn OFF the PA System:'''

(same as turn on procedure but in reverse)

'''1.''' Stop Source audio, and slide all sliders DOWN. This includes Master Volume.

'''2.''' Go to the sub and speakers, and turn each of them OFF. DO THIS BEFORE PROCEEDING!!!!!!!

'''3.''' Once all speakers are off, rack can be unplugged, or simply turn off power bar at the bottom of the rack.

Pictures will be coming soon

How to run the PA System

2012-03-10T22:19:47Z

Ouroborosyyc:

== How to Turn on and off the PA system ==

The PA system now at Protospace is available for everyone's use. As it is a Pro Audio PA system, it's operation is a bit more involved than a simple stereo. Here's the info you need in point form...

'''To Turn ON the PA System:'''

'''1.''' Make sure the Coffin (rack) has power. There is a power bar at the bottom.

'''2.''' Plug your source into the mixer on the top "Channel 7" inputs.

'''3.''' Make sure all sliders are DOWN ie OFF.

The Speakers are all self powered:

'''4.''' Go to each speaker, and either turn on, plug in, or both. Please don't adjust any knobs on the back of the speakers.

'''5.''' The SUB also has a switch and may also need to be plugged in / turned on.

'''6.''' carefully bring up the master volume sliders. Left side should be about 3/10, right side about 5/10.
Left and right side should be equal at half volume

'''7.''' Start your source audio playing and carefully slide up channel 7 slider.

If you require the wireless mic, it is wired on Channel 1.

There are two switches on the mic itself. The little black switch is POWER, and the grey switch is MUTE. To use the mic, BOTH switches must be in the UP position. Once done, please remember to turn BOTH switches off to save batteries.

'''To Turn OFF the PA System:'''

(same as turn on procedure but in reverse)

'''1.''' Stop Source audio, and slide all sliders DOWN. This includes Master Volume.

'''2.''' Go to the sub and speakers, and turn each of them OFF. DO THIS BEFORE PROCEEDING!!!!!!!

'''3.''' Once all speakers are off, rack can be unplugged, or simply turn off power bar at the bottom of the rack.

Pictures will be coming soon

Monthly Meetings

2012-03-10T21:14:33Z

Ouroborosyyc:

'''Monthly Meetings for members only are held on the 2nd Saturday of every month at 2pm-4pm MST'''

This is for active members to come together and discuss what’s been happening at Protospace, what needs to be happening, what decisions need to be made.

This '''members only''' time is an opportunity to deal with any Protospace business arising, and doing any maintenance on the space itself (this will be a big clear-out time, so if you tend to leave unlabeled stuff around, be sure to come down to help keep your things from ending up in the lost and found bin).

Protospace is a member driven, member managed organization. This is YOUR space and your organization; your voice and stewardship are greatly needed.

Members are encouraged to bring up items to discuss but please add them to the proper agenda page listed below for that month, items not on the list may not be dealt with if time runs out, also be sure to add a few notes on your agenda item.

* [[Meeting Agenda Jan 2012]]
* [https://docs.google.com/document/d/1b2eiq60lae14FkW99j5e-Kn6GlBjphajtAKl9aLMfMM/edit?hl=en_US Meeting Notes for Jan 2012]
* [[Meeting Agenda Feb 2012]]
* [https://docs.google.com/document/d/11ah06uFRkndU368VTCJlFkD3UQH44wPBwyaeBcZlPcE/edit?hl=en_US Meeting Notes for Feb 2012]
* [[Meeting Agenda Mar 2012]]
* [https://docs.google.com/document/d/1243ai2Alw6yoMgwRbGhjx3uZsZLyeKDEmxfOI2Foqsw/edit?hl=en_US Meeting Notes for Mar 2012]

Monthly Meetings

2012-02-10T22:59:46Z

Ouroborosyyc:

Meeting Agenda Feb 2012

2012-02-01T02:28:19Z

Ouroborosyyc:

'''''Calgary Protospace Ltd. Meeting of the Members'''''

== Meeting Agenda ==

February 4, 2012 2:00 pm

'''The maximum amount of time for any talking point is three minutes of talking and five minutes of discussion.'''

The maximum number of topics one person can table per meeting is three topics.

PROXIES ARE NOT SOLICITED FOR REGULAR MEETINGS OF THE MEMBERS

'''General House keeping'''

Lead: Kan

Time: 3 min

* Cleaning up, moving your stuff when you are done & what happens to things left out

* Misc Supplies for space and cash.

'''Open House Planning'''

Lead: 1Ben Reed, Valerie

Time: <del>15</del> 8 min

* Valerie's got a rough outline of what's happening so she can post the event. We need to confirm who's doing what demos, what we're doing for refreshments,selling for fundraising, donation box, buying supplies ect..

'''Meta reguarding official/unofficial meetings, appropriate times, places, and group sizes'''

Lead (solo): weetabix

Time: 3 min

*Overview of official vs unofficial. What is a "meeting" anyway?
*Concensus, cross sections, and consultation. Concensus Democracy!
*Why I (personally) will be becoming a huge cranky fsck over this subject.

'''Aquaponics Rules and Regulations'''

Lead: Donna

Time: 2 min

*Discussion of what can and cannot be done in Protospace when developing aquaponic and hydroponic projects;
*Overview of CPAA activities and how our projects can impact on their facilities.

'''IT'''

Lead: weetabix

Time: 3 min

*1010101001010101101010111111100100010001000001001010101001001001000011100100101010010010
*ADFC3299573F7CB33D300ACD3648730BCD

'''Spacial Reorganization'''

Lead: 2Ben Reed

Time: 3 min

* We've recognized that our space is being used inadequately, we want to fix that
* Numerous ideas have been tossed around with the new layout in mind, they must be discussed quickly
* Pick a date for the reorg

'''Robotics Workshops'''

Lead: 3Ben Reed

Time: 3 min

* Outline the benefits of having Thursday night robotics workshops
* Discuss the potential involvement of the WCRS
'''What is the purpose of this discussion topic? If anyone is opposed to a robotics workshop on Thursday nights, please post here. Otherwise, this is a topic that can be discussed amongst those who want to put on these workshops.'''

'''Pick 'n' Place'''

Lead: 4Ben Reed

Time: 2 min

* Supposedly this is not yet a unanimous decision, it must be talked through

<del> '''Workshop Mobilization'''</del>

<del> Lead: 5Ben Reed</del>

<del> Time: 2 min </del>

<del> Quick brainstorm about workshops and how focused we are in making them happen </del>

'''Projects and Kits'''

Lead: Andrew Funk

Time: 3 min

* Need to come up with plans for kit's / projects that Protospace can use to market itself/make a little cash?

<subject>

Lead: <name>

Time: <#> min

<Note of consideration>

<Note of consideration>

Meeting Agenda Feb 2012

2012-01-31T04:01:46Z

Ouroborosyyc:

'''''Calgary Protospace Ltd. Meeting of the Members'''''

== Meeting Agenda ==

February 4, 2012 2:00 pm

'''The maximum amount of time for any talking point is three minutes of talking and five minutes of discussion.'''

The maximum number of topics one person can table per meeting is three topics.

PROXIES ARE NOT SOLICITED FOR REGULAR MEETINGS OF THE MEMBERS

'''General House keeping'''

Lead: Kan

Time: 3 min

* Cleaning up, moving your stuff when you are done & what happens to things left out

* Misc Supplies for space and cash.

'''Open House Planning'''

Lead: 1Ben Reed, Valerie

Time: <del>15</del> 8 min

* Valerie's got a rough outline of what's happening so she can post the event. We need to confirm who's doing what demos, what we're doing for refreshments,selling for fundraising, donation box, buying supplies ect..

'''Meta reguarding official/unofficial meetings, appropriate times, places, and group sizes'''

Lead (solo): weetabix

Time: 3 min

*Overview of official vs unofficial. What is a "meeting" anyway?
*Concensus, cross sections, and consultation. Concensus Democracy!
*Why I (personally) will be becoming a huge cranky fsck over this subject.

'''Aquaponics Rules and Regulations'''

Lead: Donna

Time: 2 min

*Discussion of what can and cannot be done in Protospace when developing aquaponic and hydroponic projects;
*Overview of CPAA activities and how our projects can impact on their facilities.

'''IT'''

Lead: weetabix

Time: 3 min

*1010101001010101101010111111100100010001000001001010101001001001000011100100101010010010
*ADFC3299573F7CB33D300ACD3648730BCD

'''Spacial Reorganization'''

Lead: 2Ben Reed

Time: 3 min

* We've recognized that our space is being used inadequately, we want to fix that
* Numerous ideas have been tossed around with the new layout in mind, they must be discussed quickly
* Pick a date for the reorg

'''Robotics Workshops'''

Lead: 3Ben Reed

Time: 3 min

* Outline the benefits of having Thursday night robotics workshops
* Discuss the potential involvement of the WCRS
'''What is the purpose of this discussion topic? If anyone is opposed to a robotics workshop on Thursday nights, please post here. Otherwise, this is a topic that can be discussed amongst those who want to put on these workshops.'''

'''Pick 'n' Place'''

Lead: 4Ben Reed

Time: 2 min

* Supposedly this is not yet a unanimous decision, it must be talked through

<del> '''Workshop Mobilization'''</del>

<del> Lead: 5Ben Reed</del>

<del> Time: 2 min </del>

<del> Quick brainstorm about workshops and how focused we are in making them happen </del>

'''Projects and Kits'''

Lead: Andrew Funk?

Time: 3 min

* Need to come up with plans for kit's / projects that Protospace can use to market itself/make a little cash?

<subject>

Lead: <name>

Time: <#> min

<Note of consideration>

<Note of consideration>

Meeting Agenda Feb 2012

2012-01-31T03:59:25Z

Ouroborosyyc:

'''''Calgary Protospace Ltd. Meeting of the Members'''''

== Meeting Agenda ==

February 4, 2012 2:00 pm

'''The maximum amount of time for any talking point is three minutes of talking and five minutes of discussion.'''

The maximum number of topics one person can table per meeting is three topics.

PROXIES ARE NOT SOLICITED FOR REGULAR MEETINGS OF THE MEMBERS

'''General House keeping''' - 3 min

Lead: Kan

* Cleaning up, moving your stuff when you are done & what happens to things left out

* Misc Supplies for space and cash.

'''Open House Planning'''

Lead: 1Ben Reed, Valerie

Time: <del>15</del> 8 min

* Valerie's got a rough outline of what's happening so she can post the event. We need to confirm who's doing what demos, what we're doing for refreshments,selling for fundraising, donation box, buying supplies ect..

'''Meta reguarding official/unofficial meetings, appropriate times, places, and group sizes'''

Solo: weetabix 3 minutes.

*Overview of official vs unofficial. What is a "meeting" anyway?
*Concensus, cross sections, and consultation. Concensus Democracy!
*Why I (personally) will be becoming a huge cranky fsck over this subject.

'''Aquaponics Rules and Regulations'''

Lead: Donna

Time: 2 min

*Discussion of what can and cannot be done in Protospace when developing aquaponic and hydroponic projects;
*Overview of CPAA activities and how our projects can impact on their facilities.

'''IT'''

Lead: weetabix

Time: 3 min

*1010101001010101101010111111100100010001000001001010101001001001000011100100101010010010
*ADFC3299573F7CB33D300ACD3648730BCD

'''Spacial Reorganization'''

Lead: 2Ben Reed

Time: 3 min

* We've recognized that our space is being used inadequately, we want to fix that
* Numerous ideas have been tossed around with the new layout in mind, they must be discussed quickly
* Pick a date for the reorg

'''Robotics Workshops'''

Lead: 3Ben Reed

Time: 3 min

* Outline the benefits of having Thursday night robotics workshops
* Discuss the potential involvement of the WCRS
'''What is the purpose of this discussion topic? If anyone is opposed to a robotics workshop on Thursday nights, please post here. Otherwise, this is a topic that can be discussed amongst those who want to put on these workshops.'''

'''Pick 'n' Place'''

Lead: 4Ben Reed

Time: 2 min

* Supposedly this is not yet a unanimous decision, it must be talked through

<del> '''Workshop Mobilization'''</del>

<del> Lead: 5Ben Reed</del>

<del> Time: 2 min </del>

<del> Quick brainstorm about workshops and how focused we are in making them happen </del>

'''Projects and Kits'''

Lead: Andrew Funk?

Time: 3 min

* Need to come up with plans for kit's / projects that Protospace can use to market itself/make a little cash?

<subject> - <0> min

Lead: <name>

<Note of consideration>

<Note of consideration>

Meeting Agenda Feb 2012

2012-01-25T02:51:56Z

Ouroborosyyc: /* Meeting Agenda */

'''''Calgary Protospace Ltd. Meeting of the Members'''''

'''
== Meeting Agenda ==

February 4, 2012 2:00 pm

'''The maximum amount of time for any talking point is three minutes of talking and five minutes of discussion.'''

The maximum number of topics one person can table per meeting is three topics.

PROXIES ARE NOT SOLICITED FOR REGULAR MEETINGS OF THE MEMBERS

'''Aquaponics Rules and Regulations'''

Lead: Donna time: 2 min

*Discussion of what can and cannot be done in Protospace when developing aquaponic and hydroponic projects;
*Overview of CPAA activities and how our projects can impact on their facilities.

'''IT'''

Lead: weetabix time: 3 min

Meeting Agenda Feb 2012

2012-01-25T02:49:34Z

Ouroborosyyc: /* Meeting Agenda */

Meeting Agenda Feb 2012

2012-01-25T02:40:41Z

Ouroborosyyc: /* Meeting Agenda */

'''''Calgary Protospace Ltd. Meeting of the Members'''''

'''
== Meeting Agenda ==

February 4, 2012 2:00 pm

'''The maximum amount of time for any talking point is three minutes of talking and five minutes of discussion.'''

The maximum number of topics one person can table per meeting is three topics.

PROXIES ARE NOT SOLICITED FOR REGULAR MEETINGS OF THE MEMBERS

'''Aquaponics Rules and Regulations'''

Lead: Donna

*Discussion of what can and cannot be done in Protospace when developing aquaponic and hydroponic projects;
*Overview of CPAA activities and how our projects can impact on their facilities.

Meeting Agenda Feb 2012

2012-01-25T02:40:06Z

Ouroborosyyc:

'''''Calgary Protospace Ltd. Meeting of the Members'''''

'''
== Meeting Agenda ==

February 4, 2012 2:00 pm

'''The maximum amount of time for any talking point is three minutes of talking and five minutes of discussion.'''

'''The maximum number of topics one person can table per meeting is three topics.'''

'''PROXIES ARE NOT SOLICITED FOR REGULAR MEETINGS OF THE MEMBERS'''

'''Aquaponics Rules and Regulations'''

Lead: Donna

*Discussion of what can and cannot be done in Protospace when developing aquaponic and hydroponic projects;
*Overview of CPAA activities and how our projects can impact on their facilities.

Monthly Meetings

2012-01-25T02:39:10Z

Ouroborosyyc:

Meeting Agenda Feb 2012

2012-01-25T02:37:55Z

Ouroborosyyc: Created page with "'''''Calgary Protospace Ltd. Special Meeting of the Members''''' ''' == Meeting Agenda == February 4, 2012 2:00 pm '''The maximum amount of time for any talking point is thre..."

'''''Calgary Protospace Ltd. Special Meeting of the Members'''''

'''
== Meeting Agenda ==

February 4, 2012 2:00 pm

'''The maximum amount of time for any talking point is three minutes of talking and five minutes of discussion.

The maximum number of topics one person can table per meeting is three topics.'''

'''Aquaponics Rules and Regulations'''

Lead: Donna

*Discussion of what can and cannot be done in Protospace when developing aquaponic and hydroponic projects;
*Overview of CPAA activities and how our projects can impact on their facilities.

Meeting Agenda Jan 2012

2012-01-13T04:55:32Z

Ouroborosyyc:

'''''Calgary Protospace Ltd. Special Meeting of the Members

----
==
Meeting Agenda ==

January 14, 2012 2:00 pm

'''Our IT and the like - 5-8 min'''

Lead: Weetabix

Inhouse IT vs outhouse IT

All the crap that is built, on the server, and available, or could be, now that we have a space.

'''Sources of Funding - 5 min'''

Lead: Donna

Grant application submitted in December;

Community Relations funding opportunities from oil companies

'''Make Fashion - 10 min'''

Lead: Donna

Update on the Make Fashion undertaking with Endeavor Arts/Shannon

Potential other organizations involved

Scope of Protospace’s involvement

'''<subject> - <0> min'''

Lead: <name>

<Note of consideration>

<Note of consideration>

'''Lost and Found - 5 min'''

Lead: Kirk

Items in Bins and where they are/how it works

Items in the final bin to be thrown away/donated