Protospace Wiki - User contributions [en]

CNC router, benchtop (SIENCI LongMill) ID:143

2025-01-09T20:37:50Z

Pat.spencer: /* Update: (10/21/2022) */ Added OpenBuilds Control to the text. Also, removed reference to the previous Raspberry PI

{{Equipment page
| toolname = LongMill Wood CNC
| model = Industrial
| serial = N/A
| owner = Protospace
| loanstatus = Current
| arrived = Oct 28th, 2021
| location = Wood Shop
| status = Waiting for training material
| permission = Members & Friends Only
| certification = Must complete [[CNC-LongMill Certification]]
| photo = LongMill-on-Shelf-01.png
| id = 143
}} 

==Update: (10/21/2022)==
The LongMill has been installed on the shelf in the "Large Projects" area, along side of the MiniCNC.
===Machine Overview===
This is a SIENCI (pronounced "CNC") Labs LongMill ( See https://sienci.com/product/longmill/ ) with the short rails. The web page says it is 12"x12" but in fact it is more like 10"x13".

The controller is an Arduino running GRBL.

There is a ton of valuable reference material on their "Resources" website. See -> https://resources.sienci.com/view/lm-welcome/

For technical Details see https://resources.sienci.com/view/lm-longboard-documentation/

'''Bed size''': 250mm x 340mm (10"x 13"). The Z travel is 105mm. The clearance below the gantry is also about 105mm so this is the thickest material that could be mounted, although the router can be adjusted higher if the material has the right shape to clear the gantry. There is about a 60mm offset from the gantry to the router bit (in the Y axis) that could be used for taller pieces.

'''Spindle''': Makita Trim Router Model RT0701C ( https://www.makitatools.com/products/details/RT0701C). The Makita Router has a 1/4" collet, and a also a 1/8" collet insert. Manually controlled, this router has variable speed spindle from 10,000 to 30,000 RPM. It is manually controlled (Not controlled in software). There is a collection of bits in the red toolbox under the CNC.

Currently, the Spindle power is not controlled by the CNC Controller and must be turned On/Off manually. This is on the list of improvements.

'''Machine Control:''' GRBL on a SIENCI Milling Labs LONGBOARD Controller.

'''User Interface:''' The PC that is being used is a "nanoPC" (model nT-A3800) connected to the Controller via USB. It has [https://resources.sienci.com/view/gs-installation/ GSender], [https://winder.github.io/ugs_website/ Universal G-Code Sender (UGCS)]as well as [https://github.com/vlachoudis/bCNC bCNC] and [https://software.openbuilds.com/ OpenBuilds Control] installed. If this is intimidating our you have your own software, feel free to supply your one laptop if you wish.

'''PC Login''': The Debian logon on is automatic on startup, so you do not need to log on. But if you need it for any reason, it is protospace/protospace.

'''Hold down method''': Screws, nails, clamps(must make these).

Note that the base plate mounting board is MDF but '''IS NOT A SACRIFICIAL BOARD'''. The mounting board has threaded inserts on a 10cm x 10cm grid. You can supply your own hold down board with whatever system you wish. Simply drill holes in your board so that you can mount it to these threaded inserts. The threaded inserts are 10x24. There are a sample supply of different length screws for you to use.

'''Dust collection?''': Yes, requires a ShopVac.

'''Probing''': plate style. Plate is 15mm thick as well as X and Y 10mm offset.

'''Suitable stock materials''': Wood, plastics, foams, other.

'''Unsuitable stock materials''': Zero metal, metal alloy, or metal composites are to be cut on this. If the CNC machine was on the rolling cart, it possibly could be moved outside to do some aluminum milling, but for now don't do it.

===Instructions and Training===
<hr>
====How to turn on the machine====
The main power is turned on by turning on the common power bar for the shelf. This also turns on the lights as well as power for the MiniCNC

. [[File:143 PowerBar-01.png|200px|Main Power Bar Switch]] [[File:143-Powerbar-02.png|200px|LongMill power bar]]

There are 2 power switches to be turned on (not counting the monitor).

*The nanoPC has it's own power supply plugged into the power bar. There is a power switch on the front of the PC.
*The SCENCI Longboard has a power switch.
*And finally, when you want to start the Router, you also need to turn on the switch on the router. (Note: that this may be put on a more convenient switch and even maybe software control in the future. )

[[File:143-Longmill-Power-Controller.png|250px|LongMill Controller power]] [[File:143-LongMill-Pi-Power.jpg|150px|RaspberryPi Power]] [[File:143-LongMill-Makita-Router-Switches.png|200px|Makita Router Switches]]

*

Once the power is turned on, you will see the Debian Desktop. You now need to launch one of the programs that will talk to the Controller.

*UGCS Platform (Universal G-Code Sender Platform), ( https://all3dp.com/2/universal-gcode-sender/ )
*bCNC ( https://github.com/vlachoudis/bCNC#readme )

UGCS is written in Java, and bCNC is a Python program. I refer bCNC and will document that here.

'''How to Jog and position the Router:'''

The LongMill does not have travel switches. ( https://resources.sienci.com/view/lm-adding-limit-switches/ ) Instead, you manually jog the router to a position that you wish to use as a starting point, and then zero the XYZ references.

There is also a touch plate to assist in getting precise Z (as well as X and Y) references for you particular material.

====Fusion 360 Notes and Tweaks====
The SIENCI LongMill is not currently listed in the machine library of Fusion 360. You can however import a definition using a file created by one of the members of a LongMill facebook page.

Follow these instructions:

*Download the file from the [https://www.facebook.com/groups/mill.one/permalink/1053271605144170/ LongMill and Mill One User Facebook Group] ( [https://drive.google.com/drive/folders/1yXLyauomSxSWQKmn3VWCcp_SljIMtC6D Longmill3030.cps] )
*Following the instructions to install this file from [https://knowledge.autodesk.com/support/fusion-360/learn-explore/caas/sfdcarticles/sfdcarticles/How-to-add-a-Post-Processor-to-your-Personal-Posts-in-Fusion-360.html AutoDesk] on how to import a CPS file
*

[[File:143 Add-Longmill-Postprocess.png|400px|Screen shot of Fusion 360 Post Processor defined]]

Also, one note on Fusion 360 on their Resources website:

<nowiki>**</nowiki>To avoid potential issues with Fusion 360, we also recommend you make the following checks to your post-processor:

*'''G28 Safe Retracts''' set as “Clearance Height”
*'''Output M6''' set as “No”
*'''Output Tool Number''' set as “No”

====Reference links====

*[https://www.youtube.com/watch?v=lQ-MYnyxh7M CNC Basics - What You Need To Get Started -> https://www.youtube.com/watch?v=lQ-MYnyxh7M] (Has a LongMill in the demo)

*[https://www.youtube.com/watch?v=_Rt5sC9DrEQ&t=297s CNC Basics - Make Your First Cut -> https://www.youtube.com/watch?v=_Rt5sC9DrEQ&t=297s]
*[https://iliketomakestuff.com/how-to-use-easel/ CNC Basics - How to use Easel (free CNC software) -> https://iliketomakestuff.com/how-to-use-easel/]
*[https://www.youtube.com/watch?v=iqnvzxuXFTQ Fusion 360 CAM tutorial for CNC beginners - Making "Kevin" -> https://www.youtube.com/watch?v=iqnvzxuXFTQ]
*[https://www.youtube.com/channel/UCQffithtlX96uayLQ4fQlFg Bucky's Customs YouTube Channel (Lots of LongMill how to video's) --> https://www.youtube.com/channel/UCQffithtlX96uayLQ4fQlFg]
*
<hr>
===Planned Updates===

*Add Power Switch for Router Power
*Add E-Stop switch
*Add e-relay for Router Power (Power control in G-Code)
*Add Travel Switches.

<hr>
===Tool history===
[[File:143_LongMill-01.gif|200px|thumb|right|Original CNC when donated]]The LongMill CNC was donated by Peter Carless. He built the stand as well as the shelf and power bars for the electronics.

The first training session has yet to be held at the date of writing

Educational resources

2025-01-04T05:01:53Z

Pat.spencer: /* CNC */

Links and information for learning new skills

 
=Laser=
This is a placeholder for when people post anything that would be relevant

==Thunder==
This is a placeholder for any information (links?) for anything relevant to the Thunder laser

==Trotec==
This is the place for any information (links?) for anything relevant to the Trotec laser

*[[https://www.pcworld.com/article/394991/how-to-install-fonts-in-windows-10.html how-to-install-fonts-in-windows-10]] This is a placeholder on how to install fonts. We need to figure out a ProtoSpace procedure that allows for installing "for all users".

'''Ruby'''. Did you know that Trotec is phasing out the Printer Driver Job Control and replacing it with Ruby?
*[https://www.troteclaser.com/en-ca/laser-machines/laser-software}
Protospace has licensed Ruby and encourages you learn and use it. The Login to use Ruby is simple. It is documented on the computer that you use to operate the laser.

=Woodworking=
Surely there must be something that someone can post that will fill this space?
<hr>

=Metal Working=

*[https://www.youtube.com/watch?v=H6Dnmd3lDzA&list=PLY67-4BrEae9Ad91LPRIhcLJM9fO-HJyN Blondiehacks lathe skills] An excellent entry level youtube playlist intro to lathe cutting, measurement and operation theory.
*[https://www.youtube.com/watch?v=FyuG-B95PQs&list=PLY67-4BrEae9m8v20LNARIRl9Pd9bdFRZ Blondiehacks mill skills] Similar to lathe skills...but for the mill.
*[https://www.youtube.com/channel/UC5NO8MgTQKHAWXp6z8Xl7yQ This Old Tony] General metalworking. Some welding, some CNC conversion, milling, grinding and assorted random projects, heavy on the dad jokes.
<hr>

=Electronics=

*[https://www.youtube.com/watch?v=HyznrdDSSGM&list=PLowKtXNTBypGqImE405J2565dvjafglHU Building an 8bit breadboard computer] An excellent deep dive into low level digital computing.
*[https://www.youtube.com/c/KeysightLabs/videos Keysight Labs] Keysight promo channel, lots of great information on bench testing techniques and information. Heavy on the fancy Keysight equipment, but excellent knowledge regardless.
*Course slides for [https://docs.google.com/presentation/d/1iAPdGmbTygNw7zV11OguMSzwtghWeT-mW738NVz9tnE/edit?usp=sharing "learn to solder++"]
*
<hr>

=CAD/CAM=

*[https://www.youtube.com/watch?v=wsCmJSt-_Bo&list=PL1uBWVo4mhkBJdZwAalGIXH6hwycvmKtc What is CNC?] A high level introduction to CNC tools, workflow and introduction to feeds and speeds
*[[Learn Fusion in 30 days]] - Tutorials Series
*[https://apps.autodesk.com/FUSION/en/Detail/Index?id=7634902334100976871&os=Win64&appLang=en DXF Addon for Fusion 360]. By adjusting your geometry for the width of the laser cut you have full control over how tightly your parts fit together. By using this add-in with a small (or even negative) value for your kerf you can make loose fitting parts for a child's puzzle perhaps, or you can make parts that need to be gently pounded together for no-glue assembly
<hr>

=CNC=

*[https://www.youtube.com/watch?v=Do_C_NLH5sw Fusion 360 CAM Tutorial for Beginners! FF102]
*[https://www.youtube.com/watch?v=Y-OU0yaD62w Get started in Fusion 360 for CAM & CNC - Complete Beginners Tutorial]
*[https://www.youtube.com/watch?v=iqnvzxuXFTQ Making a Kevin] An easy to follow tutorial on how to make a simple CNC project called Kevin
*[https://www.youtube.com/watch?v=XDja1lJ9iDI&t=103s How to CNC a Tray with Fusion 360 the EASY way!]
*[https://www.youtube.com/watch?v=YpffFDzFyLQ CNC Woodworking with Fusion 360 for Absolute Beginners - How-to VCarve Einstein's Field Equation]
<hr>

=Cosplay/Crafting=

*[https://www.youtube.com/user/punishedprops/featured Punished Props Academy] Lots of tutorials on foam work, painting and weathering, vacuforming, mold making and casting.
<hr>

Educational resources

2025-01-04T04:58:37Z

Pat.spencer: /* CNC */

Links and information for learning new skills

 
=Laser=
This is a placeholder for when people post anything that would be relevant

==Thunder==
This is a placeholder for any information (links?) for anything relevant to the Thunder laser

==Trotec==
This is the place for any information (links?) for anything relevant to the Trotec laser

*[[https://www.pcworld.com/article/394991/how-to-install-fonts-in-windows-10.html how-to-install-fonts-in-windows-10]] This is a placeholder on how to install fonts. We need to figure out a ProtoSpace procedure that allows for installing "for all users".

'''Ruby'''. Did you know that Trotec is phasing out the Printer Driver Job Control and replacing it with Ruby?
*[https://www.troteclaser.com/en-ca/laser-machines/laser-software}
Protospace has licensed Ruby and encourages you learn and use it. The Login to use Ruby is simple. It is documented on the computer that you use to operate the laser.

=Woodworking=
Surely there must be something that someone can post that will fill this space?
<hr>

=Metal Working=

*[https://www.youtube.com/watch?v=H6Dnmd3lDzA&list=PLY67-4BrEae9Ad91LPRIhcLJM9fO-HJyN Blondiehacks lathe skills] An excellent entry level youtube playlist intro to lathe cutting, measurement and operation theory.
*[https://www.youtube.com/watch?v=FyuG-B95PQs&list=PLY67-4BrEae9m8v20LNARIRl9Pd9bdFRZ Blondiehacks mill skills] Similar to lathe skills...but for the mill.
*[https://www.youtube.com/channel/UC5NO8MgTQKHAWXp6z8Xl7yQ This Old Tony] General metalworking. Some welding, some CNC conversion, milling, grinding and assorted random projects, heavy on the dad jokes.
<hr>

=Electronics=

*[https://www.youtube.com/watch?v=HyznrdDSSGM&list=PLowKtXNTBypGqImE405J2565dvjafglHU Building an 8bit breadboard computer] An excellent deep dive into low level digital computing.
*[https://www.youtube.com/c/KeysightLabs/videos Keysight Labs] Keysight promo channel, lots of great information on bench testing techniques and information. Heavy on the fancy Keysight equipment, but excellent knowledge regardless.
*Course slides for [https://docs.google.com/presentation/d/1iAPdGmbTygNw7zV11OguMSzwtghWeT-mW738NVz9tnE/edit?usp=sharing "learn to solder++"]
*
<hr>

=CAD/CAM=

*[https://www.youtube.com/watch?v=wsCmJSt-_Bo&list=PL1uBWVo4mhkBJdZwAalGIXH6hwycvmKtc What is CNC?] A high level introduction to CNC tools, workflow and introduction to feeds and speeds
*[[Learn Fusion in 30 days]] - Tutorials Series
*[https://apps.autodesk.com/FUSION/en/Detail/Index?id=7634902334100976871&os=Win64&appLang=en DXF Addon for Fusion 360]. By adjusting your geometry for the width of the laser cut you have full control over how tightly your parts fit together. By using this add-in with a small (or even negative) value for your kerf you can make loose fitting parts for a child's puzzle perhaps, or you can make parts that need to be gently pounded together for no-glue assembly
<hr>

=CNC=

*[https://www.youtube.com/watch?v=Do_C_NLH5sw Fusion 360 CAM Tutorial for Beginners! FF102]
*[https://www.youtube.com/watch?v=Y-OU0yaD62w Get started in Fusion 360 for CAM & CNC - Complete Beginners Tutorial]
*[https://www.youtube.com/watch?v=iqnvzxuXFTQ Making a Kevin] An easy to follow tutorial on how to make a simple CNC project called Kevin
*[https://www.youtube.com/watch?v=XDja1lJ9iDI&t=103s How to CNC a Tray with Fusion 360 the EASY way!]
<hr>

=Cosplay/Crafting=

*[https://www.youtube.com/user/punishedprops/featured Punished Props Academy] Lots of tutorials on foam work, painting and weathering, vacuforming, mold making and casting.
<hr>

Educational resources

2024-12-27T22:29:25Z

Pat.spencer: /* Trotec */ Minor syntax update to the Ruby section

Links and information for learning new skills

 
=Laser=
This is a placeholder for when people post anything that would be relevant

==Thunder==
This is a placeholder for any information (links?) for anything relevant to the Thunder laser

==Trotec==
This is the place for any information (links?) for anything relevant to the Trotec laser

*[[https://www.pcworld.com/article/394991/how-to-install-fonts-in-windows-10.html how-to-install-fonts-in-windows-10]] This is a placeholder on how to install fonts. We need to figure out a ProtoSpace procedure that allows for installing "for all users".

'''Ruby'''. Did you know that Trotec is phasing out the Printer Driver Job Control and replacing it with Ruby?
*[https://www.troteclaser.com/en-ca/laser-machines/laser-software}
Protospace has licensed Ruby and encourages you learn and use it. The Login to use Ruby is simple. It is documented on the computer that you use to operate the laser.

=Woodworking=
Surely there must be something that someone can post that will fill this space?
<hr>

=Metal Working=

*[https://www.youtube.com/watch?v=H6Dnmd3lDzA&list=PLY67-4BrEae9Ad91LPRIhcLJM9fO-HJyN Blondiehacks lathe skills] An excellent entry level youtube playlist intro to lathe cutting, measurement and operation theory.
*[https://www.youtube.com/watch?v=FyuG-B95PQs&list=PLY67-4BrEae9m8v20LNARIRl9Pd9bdFRZ Blondiehacks mill skills] Similar to lathe skills...but for the mill.
*[https://www.youtube.com/channel/UC5NO8MgTQKHAWXp6z8Xl7yQ This Old Tony] General metalworking. Some welding, some CNC conversion, milling, grinding and assorted random projects, heavy on the dad jokes.
<hr>

=Electronics=

*[https://www.youtube.com/watch?v=HyznrdDSSGM&list=PLowKtXNTBypGqImE405J2565dvjafglHU Building an 8bit breadboard computer] An excellent deep dive into low level digital computing.
*[https://www.youtube.com/c/KeysightLabs/videos Keysight Labs] Keysight promo channel, lots of great information on bench testing techniques and information. Heavy on the fancy Keysight equipment, but excellent knowledge regardless.
*Course slides for [https://docs.google.com/presentation/d/1iAPdGmbTygNw7zV11OguMSzwtghWeT-mW738NVz9tnE/edit?usp=sharing "learn to solder++"]
*
<hr>

=CAD/CAM=

*[https://www.youtube.com/watch?v=wsCmJSt-_Bo&list=PL1uBWVo4mhkBJdZwAalGIXH6hwycvmKtc What is CNC?] A high level introduction to CNC tools, workflow and introduction to feeds and speeds
*[[Learn Fusion in 30 days]] - Tutorials Series
*[https://apps.autodesk.com/FUSION/en/Detail/Index?id=7634902334100976871&os=Win64&appLang=en DXF Addon for Fusion 360]. By adjusting your geometry for the width of the laser cut you have full control over how tightly your parts fit together. By using this add-in with a small (or even negative) value for your kerf you can make loose fitting parts for a child's puzzle perhaps, or you can make parts that need to be gently pounded together for no-glue assembly
<hr>

=CNC=

*[https://www.youtube.com/watch?v=Do_C_NLH5sw Fusion 360 CAM Tutorial for Beginners! FF102]
*[https://www.youtube.com/watch?v=Y-OU0yaD62w Get started in Fusion 360 for CAM & CNC - Complete Beginners Tutorial]
*[https://www.youtube.com/watch?v=iqnvzxuXFTQ Making a Kevin] An easy to follow tutorial on how to make a simple CNC project called Kevin
<hr>

=Cosplay/Crafting=

*[https://www.youtube.com/user/punishedprops/featured Punished Props Academy] Lots of tutorials on foam work, painting and weathering, vacuforming, mold making and casting.
<hr>

Educational resources

2024-12-27T22:28:15Z

Pat.spencer: /* Trotec */ Updated with information about Ruby.

Links and information for learning new skills

 
=Laser=
This is a placeholder for when people post anything that would be relevant

==Thunder==
This is a placeholder for any information (links?) for anything relevant to the Thunder laser

==Trotec==
This is the place for any information (links?) for anything relevant to the Trotec laser

*[[https://www.pcworld.com/article/394991/how-to-install-fonts-in-windows-10.html how-to-install-fonts-in-windows-10]] This is a placeholder on how to install fonts. We need to figure out a ProtoSpace procedure that allows for installing "for all users".

'''Ruby'''. Did you know that Trotec is phasing out the Printer Driver and replacing it with Ruby.
*[https://www.troteclaser.com/en-ca/laser-machines/laser-software}
Protospace has licensed Ruby and encourages you learn and use it. The Login to use Ruby is simple. It is documented on the computer that you use to operate the laser.

=Woodworking=
Surely there must be something that someone can post that will fill this space?
<hr>

=Metal Working=

*[https://www.youtube.com/watch?v=H6Dnmd3lDzA&list=PLY67-4BrEae9Ad91LPRIhcLJM9fO-HJyN Blondiehacks lathe skills] An excellent entry level youtube playlist intro to lathe cutting, measurement and operation theory.
*[https://www.youtube.com/watch?v=FyuG-B95PQs&list=PLY67-4BrEae9m8v20LNARIRl9Pd9bdFRZ Blondiehacks mill skills] Similar to lathe skills...but for the mill.
*[https://www.youtube.com/channel/UC5NO8MgTQKHAWXp6z8Xl7yQ This Old Tony] General metalworking. Some welding, some CNC conversion, milling, grinding and assorted random projects, heavy on the dad jokes.
<hr>

=Electronics=

*[https://www.youtube.com/watch?v=HyznrdDSSGM&list=PLowKtXNTBypGqImE405J2565dvjafglHU Building an 8bit breadboard computer] An excellent deep dive into low level digital computing.
*[https://www.youtube.com/c/KeysightLabs/videos Keysight Labs] Keysight promo channel, lots of great information on bench testing techniques and information. Heavy on the fancy Keysight equipment, but excellent knowledge regardless.
*Course slides for [https://docs.google.com/presentation/d/1iAPdGmbTygNw7zV11OguMSzwtghWeT-mW738NVz9tnE/edit?usp=sharing "learn to solder++"]
*
<hr>

=CAD/CAM=

*[https://www.youtube.com/watch?v=wsCmJSt-_Bo&list=PL1uBWVo4mhkBJdZwAalGIXH6hwycvmKtc What is CNC?] A high level introduction to CNC tools, workflow and introduction to feeds and speeds
*[[Learn Fusion in 30 days]] - Tutorials Series
*[https://apps.autodesk.com/FUSION/en/Detail/Index?id=7634902334100976871&os=Win64&appLang=en DXF Addon for Fusion 360]. By adjusting your geometry for the width of the laser cut you have full control over how tightly your parts fit together. By using this add-in with a small (or even negative) value for your kerf you can make loose fitting parts for a child's puzzle perhaps, or you can make parts that need to be gently pounded together for no-glue assembly
<hr>

=CNC=

*[https://www.youtube.com/watch?v=Do_C_NLH5sw Fusion 360 CAM Tutorial for Beginners! FF102]
*[https://www.youtube.com/watch?v=Y-OU0yaD62w Get started in Fusion 360 for CAM & CNC - Complete Beginners Tutorial]
*[https://www.youtube.com/watch?v=iqnvzxuXFTQ Making a Kevin] An easy to follow tutorial on how to make a simple CNC project called Kevin
<hr>

=Cosplay/Crafting=

*[https://www.youtube.com/user/punishedprops/featured Punished Props Academy] Lots of tutorials on foam work, painting and weathering, vacuforming, mold making and casting.
<hr>

Educational resources

2024-12-27T22:13:57Z

Pat.spencer: Changed Rabbit to Thunder

Links and information for learning new skills

 
===Laser===
This is a placeholder for when people post anything that would be relevant
====Thunder====
This is a placeholder for any information (links?) for anything relevant to the Thunder laser

====Trotec====
This is a placeholder for any information (links?) for anything relevant to the Trotec laser

* [[https://www.pcworld.com/article/394991/how-to-install-fonts-in-windows-10.html how-to-install-fonts-in-windows-10]] This is a placeholder on how to install fonts. We need to figure out a ProtoSpace procedure that allows for installing "for all users".
<hr>

===Woodworking===
Surely there must be something that someone can post that will fill this space?
<hr>

===Metal Working===

*[https://www.youtube.com/watch?v=H6Dnmd3lDzA&list=PLY67-4BrEae9Ad91LPRIhcLJM9fO-HJyN Blondiehacks lathe skills] An excellent entry level youtube playlist intro to lathe cutting, measurement and operation theory.
*[https://www.youtube.com/watch?v=FyuG-B95PQs&list=PLY67-4BrEae9m8v20LNARIRl9Pd9bdFRZ Blondiehacks mill skills] Similar to lathe skills...but for the mill.
*[https://www.youtube.com/channel/UC5NO8MgTQKHAWXp6z8Xl7yQ This Old Tony] General metalworking. Some welding, some CNC conversion, milling, grinding and assorted random projects, heavy on the dad jokes.
<hr>

===Electronics===

*[https://www.youtube.com/watch?v=HyznrdDSSGM&list=PLowKtXNTBypGqImE405J2565dvjafglHU Building an 8bit breadboard computer] An excellent deep dive into low level digital computing.
*[https://www.youtube.com/c/KeysightLabs/videos Keysight Labs] Keysight promo channel, lots of great information on bench testing techniques and information. Heavy on the fancy Keysight equipment, but excellent knowledge regardless.
*Course slides for [https://docs.google.com/presentation/d/1iAPdGmbTygNw7zV11OguMSzwtghWeT-mW738NVz9tnE/edit?usp=sharing "learn to solder++"]
*
<hr>

===CAD/CAM===

*[https://www.youtube.com/watch?v=wsCmJSt-_Bo&list=PL1uBWVo4mhkBJdZwAalGIXH6hwycvmKtc What is CNC?] A high level introduction to CNC tools, workflow and introduction to feeds and speeds
*[[Learn Fusion in 30 days]] - Tutorials Series
*[https://apps.autodesk.com/FUSION/en/Detail/Index?id=7634902334100976871&os=Win64&appLang=en DXF Addon for Fusion 360]. By adjusting your geometry for the width of the laser cut you have full control over how tightly your parts fit together. By using this add-in with a small (or even negative) value for your kerf you can make loose fitting parts for a child's puzzle perhaps, or you can make parts that need to be gently pounded together for no-glue assembly
<hr>

===CNC===

*[https://www.youtube.com/watch?v=Do_C_NLH5sw Fusion 360 CAM Tutorial for Beginners! FF102]
*[https://www.youtube.com/watch?v=Y-OU0yaD62w Get started in Fusion 360 for CAM & CNC - Complete Beginners Tutorial]
*[https://www.youtube.com/watch?v=iqnvzxuXFTQ Making a Kevin] An easy to follow tutorial on how to make a simple CNC project called Kevin
<hr>

===Cosplay/Crafting===

*[https://www.youtube.com/user/punishedprops/featured Punished Props Academy] Lots of tutorials on foam work, painting and weathering, vacuforming, mold making and casting.
<hr>

Educational resources

2024-11-14T22:30:48Z

Pat.spencer: /* CAD/CAM */ Added link to DXF Addin for Fusion.

Links and information for learning new skills

 
===Laser===
This is a placeholder for when people post anything that would be relevant
====Rabbit====
This is a placeholder for any information (links?) for anything relevant to the Rabbit laser
====Trotec====
This is a placeholder for any information (links?) for anything relevant to the Trotec laser

* [[https://www.pcworld.com/article/394991/how-to-install-fonts-in-windows-10.html how-to-install-fonts-in-windows-10]] This is a placeholder on how to install fonts. We need to figure out a ProtoSpace procedure that allows for installing "for all users".
<hr>

===Woodworking===
Surely there must be something that someone can post that will fill this space?
<hr>

===Metal Working===

*[https://www.youtube.com/watch?v=H6Dnmd3lDzA&list=PLY67-4BrEae9Ad91LPRIhcLJM9fO-HJyN Blondiehacks lathe skills] An excellent entry level youtube playlist intro to lathe cutting, measurement and operation theory.
*[https://www.youtube.com/watch?v=FyuG-B95PQs&list=PLY67-4BrEae9m8v20LNARIRl9Pd9bdFRZ Blondiehacks mill skills] Similar to lathe skills...but for the mill.
*[https://www.youtube.com/channel/UC5NO8MgTQKHAWXp6z8Xl7yQ This Old Tony] General metalworking. Some welding, some CNC conversion, milling, grinding and assorted random projects, heavy on the dad jokes.
<hr>

===Electronics===

*[https://www.youtube.com/watch?v=HyznrdDSSGM&list=PLowKtXNTBypGqImE405J2565dvjafglHU Building an 8bit breadboard computer] An excellent deep dive into low level digital computing.
*[https://www.youtube.com/c/KeysightLabs/videos Keysight Labs] Keysight promo channel, lots of great information on bench testing techniques and information. Heavy on the fancy Keysight equipment, but excellent knowledge regardless.
*Course slides for [https://docs.google.com/presentation/d/1iAPdGmbTygNw7zV11OguMSzwtghWeT-mW738NVz9tnE/edit?usp=sharing "learn to solder++"]
*
<hr>

===CAD/CAM===

*[https://www.youtube.com/watch?v=wsCmJSt-_Bo&list=PL1uBWVo4mhkBJdZwAalGIXH6hwycvmKtc What is CNC?] A high level introduction to CNC tools, workflow and introduction to feeds and speeds
*[[Learn Fusion in 30 days]] - Tutorials Series
*[https://apps.autodesk.com/FUSION/en/Detail/Index?id=7634902334100976871&os=Win64&appLang=en DXF Addon for Fusion 360]. By adjusting your geometry for the width of the laser cut you have full control over how tightly your parts fit together. By using this add-in with a small (or even negative) value for your kerf you can make loose fitting parts for a child's puzzle perhaps, or you can make parts that need to be gently pounded together for no-glue assembly
<hr>

===CNC===

*[https://www.youtube.com/watch?v=Do_C_NLH5sw Fusion 360 CAM Tutorial for Beginners! FF102]
*[https://www.youtube.com/watch?v=Y-OU0yaD62w Get started in Fusion 360 for CAM & CNC - Complete Beginners Tutorial]
*[https://www.youtube.com/watch?v=iqnvzxuXFTQ Making a Kevin] An easy to follow tutorial on how to make a simple CNC project called Kevin
<hr>

===Cosplay/Crafting===

*[https://www.youtube.com/user/punishedprops/featured Punished Props Academy] Lots of tutorials on foam work, painting and weathering, vacuforming, mold making and casting.
<hr>

Learn Fusion in 30 days

2024-11-13T01:39:03Z

Pat.spencer:

This is list of the videos used in the Protospace Fusion Fridays. These are an EXCELLENT source of training on Fusion 360.

*[https://www.youtube.com/playlist?list=PLrZ2zKOtC_-C4rWfapgngoe9o2-ng8ZBr Fusion 360 Tutorials YouTube Channel]
*[https://www.yout-ube.com/watch?v=d3qGQ2utl2A Day 1 of Learn Fusion 360 in 30 Days for Complete Beginners! - 2023 EDITION]The instructor guides viewers through creating a simple toy block, covering essential tools like sketching, extruding, and patterning. They also demonstrate how to make the block hollow and add fillets for a more polished look.
*[https://www.yout-ube.com/watch?v=DfAfxae8aRc Day 2 of Learn Fusion 360 in 30 Days for Complete Beginners! - 2023 EDITION]The instructor guides viewers through creating a glass soda bottle, covering techniques like inserting a reference image, using the Revolve tool, and applying a glass appearance. The video emphasizes the importance of designing to scale and using parametric modeling to edit previous actions.
*[https://www.yout-ube.com/watch?v=ZReXmjT42DM Day 3 of Learn Fusion 360 in 30 Days for Complete Beginners! - 2023 EDITION]This video teaches beginners how to use the Sweep feature in Fusion 360 to create a paperclip. You'll learn to draw a path for the paperclip, create tangent arcs, and turn sketches into construction lines. The video also covers how to create a profile sketch and use the Sweep command to create a 3D model.
*[https://www.yout-ube.com/watch?v=9Y-3W-Pr64U Day 4 of Learn Fusion 360 in 30 Days for Complete Beginners! - 2023 EDITION]This video teaches viewers how to create a complex glass bottle in Fusion 360 using the Loft command. The lesson covers creating offset construction planes, intersecting geometry, and adding guide rails to refine the shape. By the end of the video, viewers will have a detailed understanding of how to use the Loft command to create intricate 3D models.
*[https://www.yout-ube.com/watch?v=zN44hW9zX1I Day 5 of Learn Fusion 360 in 30 Days for Complete Beginners! - 2023 EDITION]
*...

Educational resources

2024-11-13T01:34:25Z

Pat.spencer: /* CAD/CAM */

Links and information for learning new skills

 
===Laser===
This is a placeholder for when people post anything that would be relevant
====Rabbit====
This is a placeholder for any information (links?) for anything relevant to the Rabbit laser
====Trotec====
This is a placeholder for any information (links?) for anything relevant to the Trotec laser

* [[https://www.pcworld.com/article/394991/how-to-install-fonts-in-windows-10.html how-to-install-fonts-in-windows-10]] This is a placeholder on how to install fonts. We need to figure out a ProtoSpace procedure that allows for installing "for all users".
<hr>

===Woodworking===
Surely there must be something that someone can post that will fill this space?
<hr>

===Metal Working===

*[https://www.youtube.com/watch?v=H6Dnmd3lDzA&list=PLY67-4BrEae9Ad91LPRIhcLJM9fO-HJyN Blondiehacks lathe skills] An excellent entry level youtube playlist intro to lathe cutting, measurement and operation theory.
*[https://www.youtube.com/watch?v=FyuG-B95PQs&list=PLY67-4BrEae9m8v20LNARIRl9Pd9bdFRZ Blondiehacks mill skills] Similar to lathe skills...but for the mill.
*[https://www.youtube.com/channel/UC5NO8MgTQKHAWXp6z8Xl7yQ This Old Tony] General metalworking. Some welding, some CNC conversion, milling, grinding and assorted random projects, heavy on the dad jokes.
<hr>

===Electronics===

*[https://www.youtube.com/watch?v=HyznrdDSSGM&list=PLowKtXNTBypGqImE405J2565dvjafglHU Building an 8bit breadboard computer] An excellent deep dive into low level digital computing.
*[https://www.youtube.com/c/KeysightLabs/videos Keysight Labs] Keysight promo channel, lots of great information on bench testing techniques and information. Heavy on the fancy Keysight equipment, but excellent knowledge regardless.
*Course slides for [https://docs.google.com/presentation/d/1iAPdGmbTygNw7zV11OguMSzwtghWeT-mW738NVz9tnE/edit?usp=sharing "learn to solder++"]
*
<hr>

===CAD/CAM===

*[https://www.youtube.com/watch?v=wsCmJSt-_Bo&list=PL1uBWVo4mhkBJdZwAalGIXH6hwycvmKtc What is CNC?] A high level introduction to CNC tools, workflow and introduction to feeds and speeds
*[[Learn Fusion in 30 days]] - Tutorials Series
<hr>

===CNC===

*[https://www.youtube.com/watch?v=Do_C_NLH5sw Fusion 360 CAM Tutorial for Beginners! FF102]
*[https://www.youtube.com/watch?v=Y-OU0yaD62w Get started in Fusion 360 for CAM & CNC - Complete Beginners Tutorial]
*[https://www.youtube.com/watch?v=iqnvzxuXFTQ Making a Kevin] An easy to follow tutorial on how to make a simple CNC project called Kevin
<hr>

===Cosplay/Crafting===

*[https://www.youtube.com/user/punishedprops/featured Punished Props Academy] Lots of tutorials on foam work, painting and weathering, vacuforming, mold making and casting.
<hr>

Educational resources

2024-11-13T01:33:54Z

Pat.spencer: /* CNC */

Links and information for learning new skills

 
===Laser===
This is a placeholder for when people post anything that would be relevant
====Rabbit====
This is a placeholder for any information (links?) for anything relevant to the Rabbit laser
====Trotec====
This is a placeholder for any information (links?) for anything relevant to the Trotec laser

* [[https://www.pcworld.com/article/394991/how-to-install-fonts-in-windows-10.html how-to-install-fonts-in-windows-10]] This is a placeholder on how to install fonts. We need to figure out a ProtoSpace procedure that allows for installing "for all users".
<hr>

===Woodworking===
Surely there must be something that someone can post that will fill this space?
<hr>

===Metal Working===

*[https://www.youtube.com/watch?v=H6Dnmd3lDzA&list=PLY67-4BrEae9Ad91LPRIhcLJM9fO-HJyN Blondiehacks lathe skills] An excellent entry level youtube playlist intro to lathe cutting, measurement and operation theory.
*[https://www.youtube.com/watch?v=FyuG-B95PQs&list=PLY67-4BrEae9m8v20LNARIRl9Pd9bdFRZ Blondiehacks mill skills] Similar to lathe skills...but for the mill.
*[https://www.youtube.com/channel/UC5NO8MgTQKHAWXp6z8Xl7yQ This Old Tony] General metalworking. Some welding, some CNC conversion, milling, grinding and assorted random projects, heavy on the dad jokes.
<hr>

===Electronics===

*[https://www.youtube.com/watch?v=HyznrdDSSGM&list=PLowKtXNTBypGqImE405J2565dvjafglHU Building an 8bit breadboard computer] An excellent deep dive into low level digital computing.
*[https://www.youtube.com/c/KeysightLabs/videos Keysight Labs] Keysight promo channel, lots of great information on bench testing techniques and information. Heavy on the fancy Keysight equipment, but excellent knowledge regardless.
*Course slides for [https://docs.google.com/presentation/d/1iAPdGmbTygNw7zV11OguMSzwtghWeT-mW738NVz9tnE/edit?usp=sharing "learn to solder++"]
*
<hr>

===CAD/CAM===

*[https://www.youtube.com/watch?v=wsCmJSt-_Bo&list=PL1uBWVo4mhkBJdZwAalGIXH6hwycvmKtc What is CNC?] A high level introduction to CNC tools, workflow and introduction to feeds and speeds
*[[Learn Fusion in 30 days]] - Tutorials
<hr>

===CNC===

*[https://www.youtube.com/watch?v=Do_C_NLH5sw Fusion 360 CAM Tutorial for Beginners! FF102]
*[https://www.youtube.com/watch?v=Y-OU0yaD62w Get started in Fusion 360 for CAM & CNC - Complete Beginners Tutorial]
*[https://www.youtube.com/watch?v=iqnvzxuXFTQ Making a Kevin] An easy to follow tutorial on how to make a simple CNC project called Kevin
<hr>

===Cosplay/Crafting===

*[https://www.youtube.com/user/punishedprops/featured Punished Props Academy] Lots of tutorials on foam work, painting and weathering, vacuforming, mold making and casting.
<hr>

Learn Fusion in 30 days

2024-11-12T02:27:24Z

Pat.spencer: Added description to first few entries

This is list of the videos used in the Protospace Fusion Fridays. These are an EXCELLENT source of training on Fusion 360.

*[https://www.youtube.com/playlist?list=PLrZ2zKOtC_-C4rWfapgngoe9o2-ng8ZBr Fusion 360 Tutorials YouTube Channel]
*[https://youtu.be/d3qGQ2utl2A Day 1 of Learn Fusion 360 in 30 Days for Complete Beginners! - 2023 EDITION]The instructor guides viewers through creating a simple toy block, covering essential tools like sketching, extruding, and patterning. They also demonstrate how to make the block hollow and add fillets for a more polished look.
*[https://youtu.be/DfAfxae8aRc Day 2 of Learn Fusion 360 in 30 Days for Complete Beginners! - 2023 EDITION]The instructor guides viewers through creating a glass soda bottle, covering techniques like inserting a reference image, using the Revolve tool, and applying a glass appearance. The video emphasizes the importance of designing to scale and using parametric modeling to edit previous actions.
*[https://youtu.be/ZReXmjT42DM Day 3 of Learn Fusion 360 in 30 Days for Complete Beginners! - 2023 EDITION]This video teaches beginners how to use the Sweep feature in Fusion 360 to create a paperclip. You'll learn to draw a path for the paperclip, create tangent arcs, and turn sketches into construction lines. The video also covers how to create a profile sketch and use the Sweep command to create a 3D model.
*[https://youtu.be/9Y-3W-Pr64U Day 4 of Learn Fusion 360 in 30 Days for Complete Beginners! - 2023 EDITION]This video teaches viewers how to create a complex glass bottle in Fusion 360 using the Loft command. The lesson covers creating offset construction planes, intersecting geometry, and adding guide rails to refine the shape. By the end of the video, viewers will have a detailed understanding of how to use the Loft command to create intricate 3D models.
*[https://www.yout-ube.com/watch?v=zN44hW9zX1I Day 5 of Learn Fusion 360 in 30 Days for Complete Beginners! - 2023 EDITION]
*...

Learn Fusion in 30 days

2024-11-12T02:25:16Z

Pat.spencer:

This is list of the videos used in the Protospace Fusion Fridays. These are an EXCELLENT source of training on Fusion 360.

*[https://www.youtube.com/playlist?list=PLrZ2zKOtC_-C4rWfapgngoe9o2-ng8ZBr Fusion 360 Tutorials YouTube Channel]
*[https://youtu.be/d3qGQ2utl2A Day 1 of Learn Fusion 360 in 30 Days for Complete Beginners! - 2023 EDITION]The instructor guides viewers through creating a simple toy block, covering essential tools like sketching, extruding, and patterning. They also demonstrate how to make the block hollow and add fillets for a more polished look.
*[https://youtu.be/DfAfxae8aRc Day 2 of Learn Fusion 360 in 30 Days for Complete Beginners! - 2023 EDITION]The instructor guides viewers through creating a glass soda bottle, covering techniques like inserting a reference image, using the Revolve tool, and applying a glass appearance. The video emphasizes the importance of designing to scale and using parametric modeling to edit previous actions.
*[https://youtu.be/ZReXmjT42DM Day 3 of Learn Fusion 360 in 30 Days for Complete Beginners! - 2023 EDITION]This video teaches beginners how to use the Sweep feature in Fusion 360 to create a paperclip. You'll learn to draw a path for the paperclip, create tangent arcs, and turn sketches into construction lines. The video also covers how to create a profile sketch and use the Sweep command to create a 3D model.
*[https://youtu.be/9Y-3W-Pr64U Day 4 of Learn Fusion 360 in 30 Days for Complete Beginners! - 2023 EDITION]
*[https://www.yout-ube.com/watch?v=zN44hW9zX1I Day 5 of Learn Fusion 360 in 30 Days for Complete Beginners! - 2023 EDITION]
*...

Learn Fusion in 30 days

2024-11-12T02:20:09Z

Pat.spencer:

Learn Fusion in 30 days

2024-11-12T02:17:39Z

Pat.spencer:

Learn Fusion in 30 days

2024-11-12T02:11:25Z

Pat.spencer:

Learn Fusion in 30 days

2024-11-12T02:11:01Z

Pat.spencer:

Learn Fusion in 30 days

2024-11-12T02:08:17Z

Pat.spencer:

Learn Fusion in 30 days

2024-11-11T21:33:56Z

Pat.spencer:

Learn Fusion in 30 days

2024-11-11T21:25:46Z

Pat.spencer:

This is list of the videos used in the Protospace Fusion Fridays. These are an EXCELLENT source of training on Fusion 360.

*[https://www.youtube.com/watch?v=d3qGQ2utl2A Day 1 of Learn Fusion 360 in 30 Days for Complete Beginners! - 2023 EDITION]
*[https://www.youtube.com/watch?v=DfAfxae8aRc&t=81s Day 1 of Learn Fusion 360 in 30 Days for Complete Beginners! - 2023 EDITION]

Learn Fusion in 30 days

2024-11-11T21:23:37Z

Pat.spencer:

Learn Fusion in 30 days

2024-11-11T21:22:24Z

Pat.spencer: Added links to Fusion 360 playlist videos used in Fusion Friday's

This is list of the videos used in the Protospace Fusion Fridays. These are an EXCELLENT source of training on Fusion 360.

*https://www.youtube.com/watch?v=d3qGQ2utl2A Day 1 of Learn Fusion 360 in 30 Days for Complete Beginners! - 2023 EDITION

Educational resources

2024-11-11T21:08:35Z

Pat.spencer: /* CAD/CAM */ Added link to new page with links to the Fusion 360 Training videos

Links and information for learning new skills

 
===Laser===
This is a placeholder for when people post anything that would be relevant
====Rabbit====
This is a placeholder for any information (links?) for anything relevant to the Rabbit laser
====Trotec====
This is a placeholder for any information (links?) for anything relevant to the Trotec laser

* [[https://www.pcworld.com/article/394991/how-to-install-fonts-in-windows-10.html how-to-install-fonts-in-windows-10]] This is a placeholder on how to install fonts. We need to figure out a ProtoSpace procedure that allows for installing "for all users".
<hr>

===Woodworking===
Surely there must be something that someone can post that will fill this space?
<hr>

===Metal Working===

*[https://www.youtube.com/watch?v=H6Dnmd3lDzA&list=PLY67-4BrEae9Ad91LPRIhcLJM9fO-HJyN Blondiehacks lathe skills] An excellent entry level youtube playlist intro to lathe cutting, measurement and operation theory.
*[https://www.youtube.com/watch?v=FyuG-B95PQs&list=PLY67-4BrEae9m8v20LNARIRl9Pd9bdFRZ Blondiehacks mill skills] Similar to lathe skills...but for the mill.
*[https://www.youtube.com/channel/UC5NO8MgTQKHAWXp6z8Xl7yQ This Old Tony] General metalworking. Some welding, some CNC conversion, milling, grinding and assorted random projects, heavy on the dad jokes.
<hr>

===Electronics===

*[https://www.youtube.com/watch?v=HyznrdDSSGM&list=PLowKtXNTBypGqImE405J2565dvjafglHU Building an 8bit breadboard computer] An excellent deep dive into low level digital computing.
*[https://www.youtube.com/c/KeysightLabs/videos Keysight Labs] Keysight promo channel, lots of great information on bench testing techniques and information. Heavy on the fancy Keysight equipment, but excellent knowledge regardless.
*Course slides for [https://docs.google.com/presentation/d/1iAPdGmbTygNw7zV11OguMSzwtghWeT-mW738NVz9tnE/edit?usp=sharing "learn to solder++"]
*
<hr>

===CAD/CAM===

*[https://www.youtube.com/watch?v=wsCmJSt-_Bo&list=PL1uBWVo4mhkBJdZwAalGIXH6hwycvmKtc What is CNC?] A high level introduction to CNC tools, workflow and introduction to feeds and speeds
*[[Learn Fusion in 30 days]] - Tutorials
<hr>

===CNC===

*[https://www.youtube.com/watch?v=Do_C_NLH5sw Fusion 360 CAM Tutorial for Beginners!]
*[https://www.youtube.com/watch?v=Y-OU0yaD62w Get started in Fusion 360 for CAM & CNC - Complete Beginners Tutorial]
*[https://www.youtube.com/watch?v=iqnvzxuXFTQ Making a Kevin] An easy to follow tutorial on how to make a simple CNC project called Kevin
<hr>

===Cosplay/Crafting===

*[https://www.youtube.com/user/punishedprops/featured Punished Props Academy] Lots of tutorials on foam work, painting and weathering, vacuforming, mold making and casting.
<hr>

CNC router, benchtop (SIENCI LongMill) ID:143

2024-10-06T04:35:54Z

Pat.spencer: /* Update: (10/21/2022) */ Added link to Longboard Documentation on Scenci's site.

{{Equipment page
| toolname = LongMill Wood CNC
| model = Industrial
| serial = N/A
| owner = Protospace
| loanstatus = Current
| arrived = Oct 28th, 2021
| location = Wood Shop
| status = Waiting for training material
| permission = Members & Friends Only
| certification = Must complete [[CNC-LongMill Certification]]
| photo = LongMill-on-Shelf-01.png
| id = 143
}} 

==Update: (10/21/2022)==
The LongMill has been installed on the shelf in the "Large Projects" area, along side of the MiniCNC.
===Machine Overview===
This is a SIENCI (pronounced "CNC") Labs LongMill ( See https://sienci.com/product/longmill/ ) with the short rails. The web page says it is 12"x12" but in fact it is more like 10"x13".

The controller is an Arduino running GRBL. There is a ton of valuable reference material on their "Resources" website. See -> https://resources.sienci.com/view/lm-welcome/

For technical Details see https://resources.sienci.com/view/lm-longboard-documentation/

'''Bed size''': 250mm x 340mm (10"x 13"). The Z travel is 105mm. The clearance below the gantry is also about 105mm so this is the thickest material that could be mounted, although the router can be adjusted higher if the material has the right shape to clear the gantry. There is about a 60mm offset from the gantry to the router bit (in the Y axis) that could be used for taller pieces.

'''Spindle''': Makita Trim Router Model RT0701C ( https://www.makitatools.com/products/details/RT0701C). The Makita Router has a 1/4" collet, and a also a 1/8" collet insert. Manually controlled, this router has variable speed spindle from 10,000 to 30,000 RPM. It is manually controlled (Not controlled in software). There is a collection of bits in the red toolbox under the CNC.

Currently, the Spindle power is not controlled by the CNC Controller and must be turned On/Off manually. This is on the list of improvements.

'''Machine Control:''' GRBL on a SIENCI Milling Labs LONGBOARD Controller.

'''User Interface:''' The Raspberry PI that was originally installed has been replaced with a faster and more robust "nanoPC" (model nT-A3800) connected to the Controller via USB. It has [https://resources.sienci.com/view/gs-installation/ GSender], [https://winder.github.io/ugs_website/ Universal G-Code Sender (UGCS)]as well as [https://github.com/vlachoudis/bCNC bCNC] installed.

'''PC Login''': The Debian logon on is automatic on startup, so you do not need to log on. But if you need it for any reason, it is protospace/protospace.

'''Hold down method''': Screws, nails, clamps(must make these).

Note that the base plate mounting board is MDF but '''IS NOT A SACRIFICIAL BOARD'''. The mounting board has threaded inserts on a 10cm x 10cm grid. You can supply your own hold down board with whatever system you wish. Simply drill holes in your board so that you can mount it to these threaded inserts. The threaded inserts are 10x24. There are a sample supply of different length screws for you to use.

'''Dust collection?''': Yes, requires a ShopVac.

'''Probing''': plate style. Plate is 15mm thick as well as X and Y 10mm offset.

'''Suitable stock materials''': Wood, plastics, foams, other.

'''Unsuitable stock materials''': Zero metal, metal alloy, or metal composites are to be cut on this. If the CNC machine was on the rolling cart, it possibly could be moved outside to do some aluminum milling, but for now don't do it.

===Instructions and Training===
<hr>
====How to turn on the machine====
The main power is turned on by turning on the common power bar for the shelf. This also turns on the lights as well as power for the MiniCNC

. [[File:143 PowerBar-01.png|200px|Main Power Bar Switch]] [[File:143-Powerbar-02.png|200px|LongMill power bar]]

There are 2 power switches to be turned on (not counting the monitor).

*The nanoPC has it's own power supply plugged into the power bar. There is a power switch on the front of the PC.
*The SCENCI Longboard has a power switch.
*And finally, when you want to start the Router, you also need to turn on the switch on the router. (Note: that this may be put on a more convenient switch and even maybe software control in the future. )

[[File:143-Longmill-Power-Controller.png|250px|LongMill Controller power]] [[File:143-LongMill-Pi-Power.jpg|150px|RaspberryPi Power]] [[File:143-LongMill-Makita-Router-Switches.png|200px|Makita Router Switches]]

*

Once the power is turned on, you will see the Debian Desktop. You now need to launch one of the programs that will talk to the Controller.

*UGCS Platform (Universal G-Code Sender Platform), ( https://all3dp.com/2/universal-gcode-sender/ )
*bCNC ( https://github.com/vlachoudis/bCNC#readme )

UGCS is written in Java, and bCNC is a Python program. I refer bCNC and will document that here.

'''How to Jog and position the Router:'''

The LongMill does not have travel switches. ( https://resources.sienci.com/view/lm-adding-limit-switches/ ) Instead, you manually jog the router to a position that you wish to use as a starting point, and then zero the XYZ references.

There is also a touch plate to assist in getting precise Z (as well as X and Y) references for you particular material.

====Fusion 360 Notes and Tweaks====
The SIENCI LongMill is not currently listed in the machine library of Fusion 360. You can however import a definition using a file created by one of the members of a LongMill facebook page.

Follow these instructions:

*Download the file from the [https://www.facebook.com/groups/mill.one/permalink/1053271605144170/ LongMill and Mill One User Facebook Group] ( [https://drive.google.com/drive/folders/1yXLyauomSxSWQKmn3VWCcp_SljIMtC6D Longmill3030.cps] )
*Following the instructions to install this file from [https://knowledge.autodesk.com/support/fusion-360/learn-explore/caas/sfdcarticles/sfdcarticles/How-to-add-a-Post-Processor-to-your-Personal-Posts-in-Fusion-360.html AutoDesk] on how to import a CPS file
*

[[File:143 Add-Longmill-Postprocess.png|400px|Screen shot of Fusion 360 Post Processor defined]]

Also, one note on Fusion 360 on their Resources website:

<nowiki>**</nowiki>To avoid potential issues with Fusion 360, we also recommend you make the following checks to your post-processor:

*'''G28 Safe Retracts''' set as “Clearance Height”
*'''Output M6''' set as “No”
*'''Output Tool Number''' set as “No”

====Reference links====

*[https://www.youtube.com/watch?v=lQ-MYnyxh7M CNC Basics - What You Need To Get Started -> https://www.youtube.com/watch?v=lQ-MYnyxh7M] (Has a LongMill in the demo)

*[https://www.youtube.com/watch?v=_Rt5sC9DrEQ&t=297s CNC Basics - Make Your First Cut -> https://www.youtube.com/watch?v=_Rt5sC9DrEQ&t=297s]
*[https://iliketomakestuff.com/how-to-use-easel/ CNC Basics - How to use Easel (free CNC software) -> https://iliketomakestuff.com/how-to-use-easel/]
*[https://www.youtube.com/watch?v=iqnvzxuXFTQ Fusion 360 CAM tutorial for CNC beginners - Making "Kevin" -> https://www.youtube.com/watch?v=iqnvzxuXFTQ]
*[https://www.youtube.com/channel/UCQffithtlX96uayLQ4fQlFg Bucky's Customs YouTube Channel (Lots of LongMill how to video's) --> https://www.youtube.com/channel/UCQffithtlX96uayLQ4fQlFg]
*
<hr>
===Planned Updates===

*Add Power Switch for Router Power
*Add E-Stop switch
*Add e-relay for Router Power (Power control in G-Code)
*Add Travel Switches.

<hr>
===Tool history===
[[File:143_LongMill-01.gif|200px|thumb|right|Original CNC when donated]]The LongMill CNC was donated by Peter Carless. He built the stand as well as the shelf and power bars for the electronics.

The first training session has yet to be held at the date of writing

Tools we have

2024-08-09T06:13:02Z

Pat.spencer: /* Metalworking tools */

Want to '''add a new tool'''? Follow [[Protospace Wiki:Adding new tools|this procedure]]!

We can always use new tools. Your best bet on figuring out if we want something is simply asking on our [https://forum.protospace.ca forum]. Please feel free to [[contact information|contact Protospace]] to arrange a tool donation.

We also have [[:Category:Tools|an alphabetically ordered and categorized tool catalog]].

__TOC__

==Rapid prototyping tools==

{{hatnote|Comparisons: [[our 3D printers]], [[our laser cutters]]}}

<gallery mode="nolines" widths="160" heights="160" class="mw-collapsible">
File:182.jpg|link=182|[[3D Printer, FFF (Bambu Lab P1S) ID:182]]
File:2.jpg|link=2|[[3D printer, FFF (ORD Bot Hadron) ID:2]]
File:159.jpg|link=159|[[3D printer, resin (Anycubic Photon 5.5) ID:159]]
File:170.jpg|link=170|[[3D_printer, resin (ELEGOO Saturn) ID:170]]
File:160.jpg|link=160|[[Curing station (Anycubic Wash and Cure Machine) ID:160]]
File:Thunder-51-01.jpg|link=178|[[Thunder Nova 51 Laser ID:178]]
File:107.jpg|link=107|[[Laser cutter (Trotec Speedy 300) ID:107]]
File:141.jpg|link=141|[[CNC router, mini (TD 3040) ID:141]]
File:Precix-CNC-001.jpg|link=153|[[CNC router, wood (Precix) ID:153]]
File:LongMill-on-Shelf-01.png|link=143|[[CNC router, benchtop (SIENCI LongMill) ID:143]]
</gallery>

==Automotive tools==

<gallery mode="nolines" widths="160" heights="160" class="mw-collapsible">
File:8.jpg|[[Floor jack, blue ID:8]]
File:9.jpg|[[Trolley jack and axle stand kit (Certified) ID:9]]
File:11.jpg|[[Socket set ID:11]]
File:162.jpeg|link=162|[[Bike stand (Feedback Sport) ID:162]]
File:181.jpeg|link=181|[[Blind hole bearings removal slide hammer ID:181]]
</gallery>

==Chemistry==

<gallery mode="nolines" widths="160" heights="160" class="mw-collapsible">
File:12.jpg|[[Oxygen concentrator (OGSI OG-15) ID:12]]
</gallery>

==Electronics equipment==

<gallery mode="nolines" widths="160" heights="160" class="mw-collapsible">
File:15.jpg|[[Decade box, capacitance (Servomex Controls Decade Capacitor Type B) ID:15]]
File:16.jpg|[[Function generator (John's) ID:16]]
File:18.jpg|[[Heat gun (Powerfist) ID:18]]
File:20.jpg|[[Multimeter, digital (Pro.Point 8344665) ID:20]]
File:167.jpg|[[Oscilloscope (Siglent SDS1104X-E) ID:167]]
File:23.jpg|[[Oscilloscope (Tektronix 2225) ID:23]]
File:25.jpg|[[Oscilloscope, PC (Syscomp DSO-101) ID:25]]
File:26.jpg|[[Power supply, bench (GQ Electronics GQ-A305D) ID:26]]
File:27.jpg|[[Power supply, bench, 500 V (Heathkit PS-3) ID:27]]
File:28.jpg|[[Power supply, bench, 2-channel (TENMA 72-7245) ID:28]]
File:30.jpg|[[Hot-air rework station (GQ Electronics 5200) ID:30]]
File:31.jpg|[[Solder fume extractor (Metcal) ID:31]]
File:33.jpg|[[Waveform generator (Syscomp WGM-101) ID:33]]
File:34.jpg|[[Waveform monitor (Tektronix 1730) ID:34]]
File:145-Welcome-Monitor.png|[[Welcome Room Monitor ID:145]]
</gallery>

==Metalworking tools==

<gallery mode="nolines" widths="160" heights="160" class="mw-collapsible">
File:35.jpg|[[Angle grinder (DeWalt) ID:35]]
File:37.jpg|[[Bandsaw, metal, horizontal ID:37]]
File:165.jpg|[[Bandsaw, metal, horizontal (Westward UE-712) ID:165]]
File:39.jpg|[[Bench grinder (Powerfist) ID:39]]
File:40.jpg|[[Bench grinder (Trademaster PR14210) ID:40]]
File:42.jpg|[[Drill press (Mastercraft) ID:42]]
File:45.jpg|[[Foundry, propane ID:45]]
File:121.jpg|[[Hydraulic press, 50-ton, electric ID:121]]
File:46.jpg|[[Lathe, metal (Challenger 1660G) ID:46]]
File:47.jpg|[[Lathe, miniature (Taig Microlathe II) ID:47]]
File:53.jpg|[[Metal shear (Magnum) ID:53]]
File:48.jpg|[[Milling machine (ACRA AM4V) ID:48]]
File:49.jpg|[[Milling machine, CNC (Tormach PCNC 1100) ID:49]]
File:173.png|[[Plasma Cutter (Hypertherm, Powermax85) ID:173]]
File:51.jpg|[[Plasma cutter, huge (Powercut 1500) ID:51]]
File:52.jpg|[[Plasma cutter, small (Miller Spectrum 375) ID:52]]
File:54.jpg|[[Vise, giant ID:54]]
File:56.jpg|[[Welding magnets ID:56]]
File:Metalworking pattern maker's vise.jpg|[[Metalworking pattern maker's vise]]
File:Metal drill press.jpg|[[HD gear driven drill press/mill]]
File:163.jpg|[[Pipe bender (Power Fist 12 ton hydraulic) ID:163]]
File:180.jpg|link=180|[[Metal Shear Brake Roll - (New Magnum 52) ID:180]]
</gallery>

==Woodworking and plasticworking tools==

<gallery mode="nolines" widths="160" heights="160" class="mw-collapsible">
File:171-Wood-Lathe-Jet.jpg|[[Wood Lathe, JET JWL-1236 ID:171]]
File:57.jpg|[[Bandsaw, green ID:57]]
File:61.jpg|[[Drill, hand, corded, black (Jobmate) ID:61]]
File:62.jpg|[[Drill, hand, corded, dark blue (Ryobi) ID:62]]
File:68.jpg|[[Drill, hand, corded (Makita DP3720) ID:68]]
File:69.jpg|[[Drill press, 8" (Jobmate) ID:69]]
File:70.jpg|[[Jigsaw, corded (Black & Decker) ID:70]]
File:72.jpg|[[Jigsaw (Skil) ID:72]]
File:75.jpg|[[Nailer, pneumatic, 2-in-1 ID:75]]
File:76.jpg|[[Plate joiner (Porter Cable 557) ID:76]]
File:140.jpg|[[Pocket hole jig (Kreg K3) ID:140]]
File:78.jpg|[[Rotary tool, corded (Mastercraft) ID:78]]
File:79.jpg|[[Rotary tool, cordless (Dremel) ID:79]]
File:124.jpg|[[Router table (Jeff's) ID:124]]
File:83.jpg|[[Sander, belt (Makita 9402) ID:83]]
File:85.jpg|[[Sander, detail (Ryobi) ID:85]]
File:106.jpg|[[Sander, drum (General International 15-250 M1) ID:106]]
File:138.jpg|[[Sander, random orbital (Ridgid R2601) ID:138]]
File:139.jpg|[[Sander, random orbital (Ridgid R2601) ID:139]]
File:88.jpg|[[Sander, straight-line/orbital (Black & Decker Deluxe) ID:88]]
File:89.jpg|[[Scroll saw (Dremel) ID:89]]
File:92.jpg|[[Thickness planer (Ryobi AP1301) ID:92]]
File:93.jpg|[[Vacuum, sawdust (Craftex CX404) ID:93]]
File:NoImage.png|[[Vise, wood ID:94]]
File:95.jpg|[[Vise, wood (Travis's) ID:95]]
File:Makita cordless jigsaw.jpg|cordless Makita jig saw
File:Ridgid random orbital sander (1 of 2, unknown which one).jpg|Ridgid random orbital sander (2 of these)
File:6" jointer.jpg|[[Jointer, 6-Inch ID:185]]
File:DeWalt sliding compound miter saw.jpg|[[Miter saw, compound, sliding (DeWalt) ID:186]]
File:Wood tools sharpening station.jpg|A sharpening station with a plethora of tool sharpening grinders-jigs-etc
File:149.jpg|[[Drill press, floor mounted, variable speed ID:149]]
File:164.jpg|[[Handheld metal detector ID:164]]
File:168.jpg|[[Planer, 16" Auto Planer]]
File:172.jpg|[[Table saw (SawStop) ID:172]]
File:174.jpg|[[drying rack (coyle-made) ID:174]]
</gallery>

==Textile, Leather, Vinyl, and Media tools==

<gallery mode="nolines" widths="160" heights="160" class="mw-collapsible">
File:120.jpg|[[Sewing machine, domestic (Singer 1802) ID:120]]
File:183.png|[[Sewing Machine, Industrial Cylinder Arm Walking Foot, (Techsew TS-2750) ID:183]]
File:184.jpg|[[Skiving Machine, Bell Knife, (Techsew SK-4) ID:184]]
File:Singer 211G155.jpg|[[Sewing machine, industrial (Singer 211G155) ID:147]]
File:144.jpg|[[Embroidery machine, CNC (Tajima TEJT II-C NEO 1501) ID:144]]
File:150.jpg|[[Sewing/embroidery machine, computer controlled (Singer Futura CE-250) ID:150]]
File:156.jpg|[[Sewing machine, domestic (Janome HD-1000) ID:156]]
File:157.jpg|[[Serger, 4 thread (Singer 14U34B) ID:157]]
File:158.jpg|[[Serger, 4 thread, (Janome MyLock 634D) ID:158]]
File:148.jpg|[[Vinyl cutter, big (Graphtec FC8000-75) ID:148]]
File:NoImage.png|Vinyl cutter, small (Silhouette Cameo), on loan from Jamie Frost
File:154.jpg|[[Heat press, digital (Geo Knight and Co Inc K20S) ID:154]]
File:155.jpg|[[Heat press, auto release (Insta Graphic Systems 158) ID:155]]
File:166.jpg|[[Printer, 44" Large Format (HP DesignJet T1200), ID:166]]
</gallery>

==Measuring and inspection tools==

{{hatnote|See also: the [[#Electronics equipment|electronics equipment section on this page]] for electrical and electronic measurement and test equipment.}}

<gallery mode="nolines" widths="160" heights="160" class="mw-collapsible">
File:97.jpg|[[Inspection mirror, 18" gooseneck ID:97]]
File:98.jpg|[[Magnifier lamp, large, with lid ID:98]]
File:99.jpg|[[Magnifier lamp, large, without lid ID:99]]
File:100.jpg|[[Magnifier lamp, small, with lid ID:100]]
File:101.jpg|[[Measuring tapes ID:101]]
File:102.jpg|[[Rulers ID:102]]
File:103.jpg|[[Squares ID:103]]
File:104.jpg|[[Thermometer, infrared (H64) ID:104]]
</gallery>

==Miscellaneous tools==

<gallery mode="nolines" widths="160" heights="160" class="mw-collapsible">
File:111.jpg|link=111|[[Air compressor, 80-gallon (MAXair Premium) ID:111]]
File:112.jpg|link=112|[[Air compressor, silent ID:112]]
File:115.jpg|link=115|[[Engraver ID:115]]
File:116.jpg|link=116|[[Hand truck, red ID:116]]
File:117.jpg|link=117|[[Hot-wire foam cutter, handheld, 4.5"×5.5" (Woodland Scenics) ID:117]]
File:118.jpg|link=118|[[Hot-wire foam cutter, tabletop, 14"×12" ID:118]]
File:127.jpg|link=127|[[Oil can, blue ID:127]]
File:128.jpg|link=128|[[Painting tools ID:128]]
File:129.jpg|link=129|[[Pinball machine (Williams Road Kings) ID:129]]
File:130.jpg|link=130|[[Sandblasting cabinet, floor, blue (Powerfist) ID:130]]
File:131.jpg|link=131|[[Screwdriver magnetizer/demagnetizer (Wiha 40010) ID:131]]
File:132.jpg|link=132|[[Shop vacuum, orange ID:132]]
File:133.jpg|link=133|[[Staple gun (Arrow T-18) ID:133]]
File:122.jpg|link=122|[[Tile work surfaces ID:122]]
File:123.jpg|link=123|[[Tile work surfaces ID:123]]
File:134.jpg|link=134|[[Vacuum cart ID:134]]
File:136.jpg|link=136|[[Vacuum cleaner, portable ID:136]]
File:137.jpg|link=137|[[Vacuum pump (Edwards SpeediVac ED200) ID:137]]
File:161.jpg|link=161|[[Laminator (Scotch TL902) ID:161]]
File:166.jpg|link=166|[[Printer, 44" Large Format (HP DesignJet T1200), ID:166]]
File:169.png|link=169|[[ADS-B Base Station, FlightAware, ID:169]]
File:176.jpg|link=176|[[Vending machine, pop (Vendo 576) ID:176]]
File:177.jpg|link=177|[[Vending machine, snacks (Crane 173) ID:177]]
</gallery>

==Removed equipment==

In case they are brought back, or, so people who could have sworn we had a tool know it was removed.

<gallery style="background: darksalmon" mode="nolines" class="mw-collapsible mw-collapsed">
File:91.jpg|[[Table saw (Craftex CX201) ID:91]]
File:6.jpg|[[Laser cutter, large (Rabbit Laser RL-80-1290) ID:6]]
File:3DP RapMan.jpg|[[3D printer (3D Systems RapMan)]]
File:3D printer, Come3D!.jpg|[[3D printer (Come3D!)]]
File:3DP Cupcake.jpg|[[3D printer (MakerBot Cupcake)]]
File:1.jpg|[[3D printer, FFF (IIIP) ID:1]]
File:3D printer, Nathan Ward's RepRap.jpg|[[3D printer, FFF (RepRap)]]
File:3D printer, Yin's Wanhao.jpg|[[3D printer, FFF (Wanhao Duplicator i3)]]
File:InVision si2.jpg|[[3D printer, MJM (3D Systems InVision si2)]]
File:NoImage.png|[[3D printer, SLA (mUVe 1) ID:5]]
File:Compressor Dewalt.jpg|[[Air compressor, 4-gallon (DeWalt)]]
File:Compressor Big.jpg|[[Air compressor, 17-gallon]]
File:110.jpg|[[Air compressor, 60-gallon (Campbell Hausfeld) ID:110]]
File:Reciprocating compressor.jpg|[[Air compressor, 80-gallon (Ingersoll Rand T30)]]
File:113.jpg|[[Air pump, foot-operated (Bell FootPumper) ID:113]]
File:Angle Grinder.jpg|[[Angle grinder (Kawasaki)]]
File:Anvil 75lb.jpg|[[Anvil]]
File:Bandsaw Horizontal.jpg|[[Bandsaw, metal, horizontal (Craftex B013N)]]
File:Bending Brake.jpg|[[Bending brake, 30" (Powerfist)]]
File:114.jpg|[[Bicycle tire jig ID:114]]
File:Buffer Benchtop.jpg|[[Buffer (Clarke 2H 5AB)]]
File:13.jpg|[[Counter (Fluke 1910A Multi-Counter) ID:13]]
File:Dewars.jpg|[[Dewars, 50-litre]]
File:Drill Dewalt.jpg|[[Drill, corded (DeWalt)]]
File:Pick N Place.jpg|[[Electronics assembly pick and place machine (Multitronics 2000LX)]]
File:Forge Propane 2.jpg|[[Forge, propane (Jim's)]]
File:43.jpg|[[Forge (Travis's) ID:43]]
File:NoImage.png|[[Forge, propane, pass-through ID:44]]
File:17.jpg|[[Function generator (Krohn–Hite 5100A) ID:17]]
File:Impact Driver.jpg|[[Impact driver (DeWalt)]]
File:7.jpg|[[Laser cutter, small ID:7]]
File:Lathe, Torrent T.72-42.jpg|[[Lathe, metal (Torrent T.72-42)]]
File:Lathe Mill.jpg|[[Lathe–mill combination (Craftex B2229)]]
File:Lathe Wood Mini.jpg|[[Lathe, wood (Haussmann)]]
File:MaxNC10.jpg|[[Milling machine, CNC, mini (MAXNC 10)]]
File:Audio mixing board.jpg|[[PA system (Dan Damron's)]]
File:22.jpg|[[Oscilloscope (Kikusui COS 5060) ID:22]]
File:50.jpg|[[Oxyacetylene torch, large ID:50]]
File:Parts washer, Powerfist 3.5 L.jpg|[[Parts washer, 3.5 L (Powerfist)]]
File:Plasma cutter.thumbnail.jpg|[[Plasma cutter, CNC (Kyle Paavola's)]]
File:Router Plunge Makita.jpg|[[Router, plunge (Makita 3612BR)]]
File:10.jpg|[[Press (Powerfist) ID:10]]
File:NoImage.png|[[Router table, wooden ID:81]]
File:87.jpg|[[87|Sander, random orbital (Skil 7492) ID:87]]
File:Chop Saw.jpg|[[Saw, compound mitre (Ryobi)]]
File:Chopsaw Metal.jpg|[[Saw, compound mitre, metal (Ryobi)]]
File:Reciprocating Saw.jpg|[[Saw, sabre (Mastercraft)]]
File:Skil Saw BD.jpg|[[Saw, handheld circular, 7 1/4" (Black & Decker)]]
File:Skil Saw Red.jpg|[[Saw, handheld circular (Skil)]]
File:90.jpg|[[Scroll saw (Mastercraft 55-6714-6) ID:90]]
File:119.jpg|[[Sewing machine, industrial (Relsew) ID:119]]
File:Shaper, metal.jpg|[[Shaper, 7"]]
File:Taps Grey.jpg|[[Tap & die set (Mastercraft)]]
File:OxyAce Mini.jpg|[[Torch, oxygen–acetylene, mini]]
File:32.jpg|[[UV photomasker (Dan's) ID:32]]
File:135.jpg|[[Vacuum pump ID:135]]
File:Vice Medium.jpg|[[Vise, medium (Irwin)]]
File:Welder MIG.jpg|[[Welder, MIG (Lincoln Weld-Pak 100)]]
File:55.jpg|[[Welder, stick, orange (Acklands 225 AC Sizzler) ID:55]]
File:109.jpg|[[Welder, Stick, AC/DC (Miller Thunderbolt XL) ID:109]]
File:74.jpg|[[Miter saw, compound, sliding (Hitachi) ID:74]]
File:142.jpg|[[Brake, shear, roller, 52" (Magnum) ID:142]]
File:146.jpg|[[Garment graphic printer, direct inject (Brother GT-361) ID:146]]
</gallery>

Laser cutter (Trotec Speedy 300) ID:107

2024-07-31T06:01:19Z

Pat.spencer: /* Maintenance */ Added text and pictures referring to Dust Collector cleaning

{{Equipment page
| toolname = Trotec
| model = [https://www.troteclaser.com/en-ca/laser-machines/laser-engravers-speedy-series/ Speedy 300]
| serial = S3-4699
| owner = Protospace
| loanstatus = Owned by Protospace
| arrived = December 2016
| location = Bay 108, near the door to the front rooms
| status = Working
| permission = Members & Friends Only
| certification = Must complete [[Laser Certification]] and [[Trotec Certification]]
| id = 107
}}

==Quick Specs==

*'''Working bed size:''' 730mm x 430mm (28 3/4" x 17" ish)
*'''Engraving resolution:''' 1000DPI
*'''Kerf:''' 0.1mm
*'''Supported file formats:''' Anything that can be "printed" to [https://www.troteclaser.com/en-ca/laser-machines/jobcontrol JobControl] with the appropriate vectors, fills and line formatting. Trotec's [https://www.youtube.com/c/TrotecLaserCanada/videos excellent tutorials] and our [https://docs.google.com/presentation/d/1_RdW1xh5ltwHSCs7e7BQaaY60jo0sO8frpAQ2GgcG5w/edit?usp=sharing training courses] are done in [https://www.coreldraw.com/en/ CorelDRAW], so the computer attached to our laser provides a licensed copy. Other popular software includes [https://inkscape.org/ Inkscape], [https://www.autodesk.ca/en/products/autocad/overview Autodesk AutoCAD] and [https://www.adobe.com/ca/products/illustrator.html Adobe Illustrator], generating files such as DXF, CDR, SVG, AI, PDF, etc.
*'''Maximum material thickness:''' generally 1/2", with thicker materials possible using multiple passes, resulting in poor edge finish due to kerf.

 
==Usage and Billing Policies==
{{Money|This tool is not free.}}
All members [https://my.protospace.ca/courses/321 certified] on the Trotec receive six hours per month of free laser use. Additional time is billed at $0.50 per minute. This is "laser on" or tube time, as tracked by the tablet mounted on the wall above the Trotec. Users are responsible for monitoring their own usage and making payment accordingly.

This section is under development. If you have concerns regarding commercial or "excessive" use, reach out to laser trainers, forums, directors, etc.

Agreement is under review but included for reference.

*[https://drive.google.com/file/d/0By-vvp6fxFekUF9WZG9jaFdwMHc/view?resourcekey=0-GxIydSgSjerHfn-1onI0gw Trotec Laser Account Agreement]

Additionally, users must perform the necessary maintenance, including inspecting the lens and mirror, and cleaning if necessary 
==Documentation==

{{Warning|It is imperative to complete a [[chlorine test]] on materials before working with them in any laser cutter.}}
{{Warning|Per training and usage agreement, the lens and mirror must be checked and cleaned:
* before use
* hourly during continuous use
* when used with unfamiliar material
* after use.}}
[[File:Power Control through Color Selection Table.png|thumb|Power Control through Color Selection Table from the JobControl 11.2 Manual]]

======References======
[https://docs.google.com/presentation/d/1_RdW1xh5ltwHSCs7e7BQaaY60jo0sO8frpAQ2GgcG5w/edit?usp=sharing Trotec Training]

[https://drive.google.com/drive/folders/0B4igHgxabriCeGI1OWlTOV90dWs?resourcekey=0-BmjyVLbDcki46YPtgD4tFw&usp=sharing Google Drive: Trotec documentation resources]

[https://www.youtube.com/c/TrotecLaserCanada/videos YouTube: Trotec Laser Canada]

[https://wiki.protospace.ca/images/e/ef/Speedy-300-Manual-EN.pdf Speedy 300 Product Manual]

[https://wiki.protospace.ca/images/a/a4/JobControl-11-2-operation-manual-EN.pdf JobControl 11.2 Operation Manual]

======Tips and tricks======
Engraving can be done with image files (PNG et al) including photo engraves, or with vector fills, including masking with white.

Please try any new, strange, or unknown materials in the Rabbit first, and closely watch them for flame or dense black smoke.
The lens is very exposed on the Trotec and thick smokey materials, like woods full of resin or glue, rubber, or some plastics, can very quickly damage the machine and potentially the lungs of everyone in the space.
Start with low power tests and work your way up.

 

======Power and speed settings======
[[File:Speedy300-80W-MarkSolid.pdf|thumb|Trotec Speedy 300 Material Parameters]]
 

======Permissions on TROTEC PC to install software/fonts======
Occasionally we get requests from a member who wants to do something on the Trotec PC which requires elevated privileges. 
The normal permissions are that users do not have Local Admin rights so that we can limit the rogue changes to the system. We HAVE put in place a procedure that someone can request to be elevated temporarily so that a knowledgable user can perform installs etc. 
The procedure is to contact one of the Network/System Administrators and request that you be added to the "Laser-Trotec-Admins" group. 
Until we come up with an improved the procedure, please send a message to @pat.spencr on SpacePort, or email me directly @protospace.ca

==Troubleshooting==

======Laser won't move side to side or up and down======
Lid must be closed on startup to allow the platform to home to the base.

======"Logon method is not allowed on this computer" when trying to sign in to the computer with your Protospace username and password======
Your account is not authorized/enabled to use this machine, have you taken the training? Did you pay for, attend on time and pass/participate in the training? Were you vetted at the time that you took your training? Did the instructor mark you as Attended? Please verify your training records on Spaceport and check in on the forums to update your account.

======CorelDRAW won't launch (shows logo and immediately quits, doesn't get to login screen)======
In Windows, navigate to C:\Users\Your.Username\AppData\Roaming\ (replace "Your.Username" with the name used to logon to the machine; note that the "AppData" folder is hidden, and will need to be manually typed into the address bar). Rename the "Corel" folder to "Corel.bak" and attempt to launch CorelDRAW. This process will displace your tool presets, window positions, recent files list, palettes, etc.

======CorelDRAW login shows "Error: Unknown Error", or is otherwise corrupt or drawn weird======
The profile reset process above for "CorelDRAW won't launch" seemed to fix the error. If the login window isn't rendering properly, the Tab key on the keyboard can be used to navigate between fields and off-screen buttons...

======Lines are not picked up by JobControl======
See color chart on this page, verify your palette. Check line thickness, it should be "hairline" or very small, 0.2px seemed to work in Inkscape.

Ensure alpha/transparency is set to full opaqueness, be that 0% or 100% in the software of your choosing - especially Inkscape.

In your material settings, is the chosen color assigned to a function such as cut, engrave, position, etc??

======JobControl shows a 0:00 estimate, even with valid lines/colors======
With short cuts (<15sec?), sometimes the estimated time shown will be 0:00 after updating job time. If the color is being picked up by JobControl and the lines appear correct in preview, just try it - scrap material is helpful here.

======Printing to JobControl shows a blank job======
Fix page size in editor's Page Setup and/or Trotec Engraver printer preferences Job Size. Try moving work to another part of the page; check Print Preview and CorelDRAW's Preflight tab.

======Error "No jobs for transmission found"======
Right click the job and press reset.

======JobControl says that "job will not fit on plate"======
When printing, venture into the Trotec Engraver printer settings, under the "Preferences" button and ensure that both "Take from application" and "Minimize to jobsize" are enabled. If these options are not showing, enable them under the "General" tab and change the view to "Expert". Then, ensure that your job actually fits onto a page that'll fit on the Trotec bed. Watch for stragglers, points of vectors, errant pastes or lines. Check the Print Preview and CorelDRAW's Preflight tab. Move your work to another part of the page. If all else fails, return to the Trotec Engraver printer settings and manually set the jobsize to equal the Trotec bed size.

======Job appears to print successfully, but doesn't show in JobControl's queue======

*Disable DPI filter below list on the right in JobControl
*Open the [https://www.techsupportall.com/solved-how-to-clean-printer-spool-queue-clean-print-spool-fixit/ Windows printer queue] by double clicking the printer icon on the right side of the task bar, then right click on each job and Cancel. (Reference: [https://forum.protospace.ca/t/trotec-cant-talk-to-computer/3205/28?u=gregm Trotec "printer" permissions have been updated] and this should now work for all users)
*Restart the computer

======"No response from engraver" or other COM port issue======
Someone may have left themselves logged in, try restarting the machine to release the port.

======Trotec Rotary Not Working / Connection======
The fix was replacing a fuse in the fuse box, but the cause of the blown fuse is less obvious

The molex connector wasn’t connected properly on the rotary’s end. One of the pins was wedged up toward the top. I think the fuse blew when I tried to use it. I had to tweeze the connector back to proper shape.

Extra replacement fuses are in the drawer, but it’s going good now.

This is as good a place as any to say be VERY careful when plugging in the molex connector, the machine has to be '''''off''''' and if it fights you at all it is in the wrong way. Inspect the cable and see which side the little clippy thing has broken off, and line it up to the little clippy thing on the port.

Also, when carrying the rotary out of the classroom (carpet) be sure you are only touching the metal parts, not the inexplicably-exposed pcb at the bottom, as ESD is common for that reason per the technician.

======Unable to add a new materials group======
Scroll all the way to bottom and right-click the whitespace below Zac's name. Then select "Create group".

======Anything else======
https://forum.protospace.ca/c/areas/laser-beams/13

[mailto:REMOVE_laser_FURSPAM@protospace.ca Email contact instructions]

[[File:320px-HelloIT.jpg|alt=]]

 

==Maintenance==
Major problems are best reported by [mailto:REMOVE_laser_FURSPAM@protospace.ca Email contact instructions] and left to TroCare warranty by local technician, but preventative maintenance is our responsibility, per tech:

As needed: Clean lens and first mirror. Inspect both after every hour of laser-on time, and clean any visible residue

Monthly: Clean linear rails for x and y axis, using 3M silicone lubricant and a clean cotton rag or soft paper towel. Move the carriage gently by hand to clean underneath it.

Yearly? - Clean dust collection chamber and vacuum hose. See pictures of dust. [[:File:107-Trotec-20240730.jpg]] and [[:File:107-Trotec-20240730-2.jpg]]

[https://www.youtube.com/watch?v=Fguib-8X1RI Trotec Laser Canada - How to Properly Clean and Maintain Your Trotec Speedy 300 Laser Cutting Machine]

==History==
July-2024 - Another fire occurred ([https://forum.protospace.ca/t/fire-while-using-the-trotec/7130 forum post]). This time due to combustible build up in a (seemingly) hard to reach area

June 2023 - material caught fire in the Trotec ([https://forum.protospace.ca/t/trotec-out-of-order/4126 forum post]). Trotec completed all necessary repairs (energy chain and air assist, x axis belt, dust protection belt, top cover/lid, x axis limit switch, laser pointer). The work bed was also replaced at this time (unrelated to the fire). Trotec tech tested laser output (91.1W).

Feb 2023 - [[Trotec-PC-Disk-Upgrade|Trotec PC Disk Drive upgrade]]. The Trotec PC started exhibiting OS Stability issues, primarily the Print Spooler crashing. The disk was nearly full.

Sept 2022 - [https://forum.protospace.ca/t/trotec-problems/2051 second replacement and repair of Y motor] by Trotec technician, [https://forum.protospace.ca/t/late-entry-motion-trotec-repair-budget/2402 purchase of TroCare warranty]

Aug/Sept 2020 - [https://groups.google.com/u/2/g/protospace-administration/c/hnP4H-rPB2Y/m/Lk8UM0QUAgAJ replacement and repair of Y motor]

June 30th 2019 - [https://groups.google.com/u/2/g/protospace-discuss/c/BKWTS6N_0a0/m/mjBBmakQAwAJ first aftermarket replacement lens installed]

June 12th 2019 - [https://groups.google.com/u/2/g/protospace-discuss/c/aHkjj7tKWTw/m/FstksObLAQAJ eggcrate DIY worktable installed]

December 2016 - purchased, new

 
[[Category:Showcase tools]]
[[Category:Plasticworking tools]]
[[Category:Woodworking tools]]
[[Category:Textileworking tools]]
[[Category:Computer-controlled tools]]

File:107-Trotec-20240730-2.jpg

2024-07-31T05:57:14Z

Pat.spencer: Inside of dust collection chamber after a cleaning with air (Vacuum and air blower)

== Summary ==
Inside of dust collection chamber after a cleaning with air (Vacuum and air blower)

File:107-Trotec-20240730.jpg

2024-07-31T05:55:30Z

Pat.spencer: Dust Collector at Hose fitting before any cleanup.

== Summary ==
Dust Collector at Hose fitting before any cleanup.

Tools we have

2024-07-01T17:41:15Z

Pat.spencer: /* Rapid prototyping tools */

Want to '''add a new tool'''? Follow [[Protospace Wiki:Adding new tools|this procedure]]!

We can always use new tools. Please feel free to [[contact information|contact Protospace]] to donate, arrange for pickup, or drop them off in person.

If you are interested in knowing what kind of tools we are looking for, we also have a member-managed [[Tools we want|tool wish list]], but your best bet on figuring out if we want something is simply asking on our [https://forum.protospace.ca forum].

We also have [[:Category:Tools|an alphabetically ordered and categorized tool catalog]].

__TOC__

==Rapid prototyping tools==

{{hatnote|Comparisons: [[our 3D printers]], [[our laser cutters]]}}

<gallery mode="nolines" widths="160" heights="160">
File:182.jpg|link=182|[[3D Printer, FFF (Bambu Lab P1S) ID:182]]
File:2.jpg|link=2|[[3D printer, FFF (ORD Bot Hadron) ID:2]]
File:159.jpg|link=159|[[3D printer, resin (Anycubic Photon 5.5) ID:159]]
File:170.jpg|link=170|[[3D_printer, resin (ELEGOO Saturn) ID:170]]
File:160.jpg|link=160|[[Curing station (Anycubic Wash and Cure Machine) ID:160]]
File:Thunder-51-01.jpg|link=178|[[Thunder Nova 51 Laser ID:178]]
File:107.jpg|link=107|[[Laser cutter (Trotec Speedy 300) ID:107]]
File:141.jpg|link=141|[[CNC router, mini (TD 3040) ID:141]]
File:Precix-CNC-001.jpg|link=153|[[CNC router, wood (Precix) ID:153]]
File:LongMill-on-Shelf-01.png|link=143|[[CNC router, benchtop (SIENCI LongMill) ID:143]]
</gallery>

==Automotive tools==

<gallery mode="nolines" widths="160" heights="160">
File:8.jpg|[[Floor jack, blue ID:8]]
File:9.jpg|[[Trolley jack and axle stand kit (Certified) ID:9]]
File:11.jpg|[[Socket set ID:11]]
File:162.jpeg|link=162|[[Bike stand (Feedback Sport) ID:162]]
File:181.jpeg|link=181|[[Blind hole bearings removal slide hammer ID:181]]
</gallery>

==Chemistry==

<gallery mode="nolines" widths="160" heights="160">
File:12.jpg|[[Oxygen concentrator (OGSI OG-15) ID:12]]
</gallery>

==Electronics equipment==

<gallery mode="nolines" widths="160" heights="160">
File:14.jpg|[[Counter (Lafayette 54517) ID:14]]
File:15.jpg|[[Decade box, capacitance (Servomex Controls Decade Capacitor Type B) ID:15]]
File:16.jpg|[[Function generator (John's) ID:16]]
File:18.jpg|[[Heat gun (Powerfist) ID:18]]
File:19.jpg|[[Logic analyzer (HP 1631D) ID:19]]
File:20.jpg|[[Multimeter, digital (Pro.Point 8344665) ID:20]]
File:167.jpg|[[Oscilloscope (Siglent SDS1104X-E) ID:167]]
File:23.jpg|[[Oscilloscope (Tektronix 2225) ID:23]]
File:24.jpg|[[Oscilloscope (Tektronix 2465A) ID:24]]
File:25.jpg|[[Oscilloscope, PC (Syscomp DSO-101) ID:25]]
File:26.jpg|[[Power supply, bench (GQ Electronics GQ-A305D) ID:26]]
File:27.jpg|[[Power supply, bench, 500 V (Heathkit PS-3) ID:27]]
File:28.jpg|[[Power supply, bench, 2-channel (TENMA 72-7245) ID:28]]
File:30.jpg|[[Hot-air rework station (GQ Electronics 5200) ID:30]]
File:31.jpg|[[Solder fume extractor (Metcal) ID:31]]
File:33.jpg|[[Waveform generator (Syscomp WGM-101) ID:33]]
File:34.jpg|[[Waveform monitor (Tektronix 1730) ID:34]]
File:145-Welcome-Monitor.png|[[Welcome Room Monitor ID:145]]
</gallery>

==Metalworking tools==

<gallery mode="nolines" widths="160" heights="160">
File:35.jpg|[[Angle grinder (DeWalt) ID:35]]
File:37.jpg|[[Bandsaw, metal, horizontal ID:37]]
File:165.jpg|[[Bandsaw, metal, horizontal (Westward UE-712) ID:165]]
File:39.jpg|[[Bench grinder (Powerfist) ID:39]]
File:40.jpg|[[Bench grinder (Trademaster PR14210) ID:40]]
File:151.jpg|[[Brake, box and pan, 24" (Magnum) ID:151]]
File:42.jpg|[[Drill press (Mastercraft) ID:42]]
File:45.jpg|[[Foundry, propane ID:45]]
File:121.jpg|[[Hydraulic press, 50-ton, electric ID:121]]
File:46.jpg|[[Lathe, metal (Challenger 1660G) ID:46]]
File:47.jpg|[[Lathe, miniature (Taig Microlathe II) ID:47]]
File:53.jpg|[[Metal shear (Magnum) ID:53]]
File:48.jpg|[[Milling machine (ACRA AM4V) ID:48]]
File:49.jpg|[[Milling machine, CNC (Tormach PCNC 1100) ID:49]]
File:173.png|[[Plasma Cutter (Hypertherm, Powermax85) ID:173]]
File:51.jpg|[[Plasma cutter, huge (Powercut 1500) ID:51]]
File:52.jpg|[[Plasma cutter, small (Miller Spectrum 375) ID:52]]
File:54.jpg|[[Vise, giant ID:54]]
File:56.jpg|[[Welding magnets ID:56]]
File:Metalworking pattern maker's vise.jpg|[[Metalworking pattern maker's vise]]
File:Metal drill press.jpg|[[HD gear driven drill press/mill]]
File:163.jpg|[[Pipe bender (Power Fist 12 ton hydraulic) ID:163]]
File:180.jpg|[[Metal Shear Brake Roll - (New Magnum 52) ID:180]]
</gallery>

==Woodworking and plasticworking tools==

<gallery mode="nolines" widths="160" heights="160">
File:171-Wood-Lathe-Jet.jpg|[[Wood Lathe, JET JWL-1236 ID:171]]
File:57.jpg|[[Bandsaw, green ID:57]]
File:61.jpg|[[Drill, hand, corded, black (Jobmate) ID:61]]
File:62.jpg|[[Drill, hand, corded, dark blue (Ryobi) ID:62]]
File:68.jpg|[[Drill, hand, corded (Makita DP3720) ID:68]]
File:69.jpg|[[Drill press, 8" (Jobmate) ID:69]]
File:70.jpg|[[Jigsaw, corded (Black & Decker) ID:70]]
File:72.jpg|[[Jigsaw (Skil) ID:72]]
File:75.jpg|[[Nailer, pneumatic, 2-in-1 ID:75]]
File:76.jpg|[[Plate joiner (Porter Cable 557) ID:76]]
File:140.jpg|[[Pocket hole jig (Kreg K3) ID:140]]
File:78.jpg|[[Rotary tool, corded (Mastercraft) ID:78]]
File:79.jpg|[[Rotary tool, cordless (Dremel) ID:79]]
File:124.jpg|[[Router table (Jeff's) ID:124]]
File:83.jpg|[[Sander, belt (Makita 9402) ID:83]]
File:85.jpg|[[Sander, detail (Ryobi) ID:85]]
File:106.jpg|[[Sander, drum (General International 15-250 M1) ID:106]]
File:138.jpg|[[Sander, random orbital (Ridgid R2601) ID:138]]
File:139.jpg|[[Sander, random orbital (Ridgid R2601) ID:139]]
File:88.jpg|[[Sander, straight-line/orbital (Black & Decker Deluxe) ID:88]]
File:89.jpg|[[Scroll saw (Dremel) ID:89]]
File:91.jpg|[[Table saw (Craftex CX201) ID:91]]
File:92.jpg|[[Thickness planer (Ryobi AP1301) ID:92]]
File:93.jpg|[[Vacuum, sawdust (Craftex CX404) ID:93]]
File:NoImage.png|[[Vise, wood ID:94]]
File:95.jpg|[[Vise, wood (Travis's) ID:95]]
File:Makita cordless jigsaw.jpg|cordless Makita jig saw
File:Ridgid random orbital sander (1 of 2, unknown which one).jpg|Ridgid random orbital sander (2 of these)
File:6" jointer.jpg|6" jointer
File:DeWalt sliding compound miter saw.jpg|12" Dewalt sliding compound miter saw
File:Wood tools sharpening station.jpg|A sharpening station with a plethora of tool sharpening grinders-jigs-etc
File:149.jpg|[[Drill press, floor mounted, variable speed ID:149]]
File:164.jpg|[[Handheld metal detector ID:164]]
File:168.jpg|[[Planer, 16" Auto Planer]]
File:172.jpg|[[Table saw (SawStop) ID:172]]
File:174.jpg|[[drying rack (coyle-made) ID:174]]
</gallery>

==Textile, Leather, Vinyl, and Media tools==

<gallery mode="nolines" widths="160" heights="160">
File:120.jpg|[[Sewing machine, domestic (Singer 1802) ID:120]]
File:183.png|[[Sewing Machine, Industrial Cylinder Arm Walking Foot, (Techsew TS-2750) ID:183]]
File:184.jpg|[[Skiving Machine, Bell Knife, (Techsew SK-4) ID:184]]
File:Singer 211G155.jpg|[[Sewing machine, industrial (Singer 211G155) ID:147]]
File:144.jpg|[[Embroidery machine, CNC (Tajima TEJT II-C NEO 1501) ID:144]]
File:150.jpg|[[Sewing/embroidery machine, computer controlled (Singer Futura CE-250) ID:150]]
File:156.jpg|[[Sewing machine, domestic (Janome HD-1000) ID:156]]
File:157.jpg|[[Serger, 4 thread (Singer 14U34B) ID:157]]
File:158.jpg|[[Serger, 4 thread, (Janome MyLock 634D) ID:158]]
File:148.jpg|[[Vinyl cutter, big (Graphtec FC8000-75) ID:148]]
File:NoImage.png|Vinyl cutter, small (Silhouette Cameo), on loan from Jamie Frost
File:154.jpg|[[Heat press, digital (Geo Knight and Co Inc K20S) ID:154]]
File:155.jpg|[[Heat press, auto release (Insta Graphic Systems 158) ID:155]]
File:166.jpg|[[Printer, 44" Large Format (HP DesignJet T1200), ID:166]]
</gallery>

==Measuring and inspection tools==

{{hatnote|See also: the [[#Electronics equipment|electronics equipment section on this page]] for electrical and electronic measurement and test equipment.}}

<gallery mode="nolines" widths="160" heights="160">
File:97.jpg|[[Inspection mirror, 18" gooseneck ID:97]]
File:98.jpg|[[Magnifier lamp, large, with lid ID:98]]
File:99.jpg|[[Magnifier lamp, large, without lid ID:99]]
File:100.jpg|[[Magnifier lamp, small, with lid ID:100]]
File:101.jpg|[[Measuring tapes ID:101]]
File:102.jpg|[[Rulers ID:102]]
File:103.jpg|[[Squares ID:103]]
File:104.jpg|[[Thermometer, infrared (H64) ID:104]]
</gallery>

==Miscellaneous tools==

<gallery mode="nolines" widths="160" heights="160">
File:111.jpg|link=111|[[Air compressor, 80-gallon (MAXair Premium) ID:111]]
File:112.jpg|link=112|[[Air compressor, silent ID:112]]
File:115.jpg|link=115|[[Engraver ID:115]]
File:116.jpg|link=116|[[Hand truck, red ID:116]]
File:117.jpg|link=117|[[Hot-wire foam cutter, handheld, 4.5"×5.5" (Woodland Scenics) ID:117]]
File:118.jpg|link=118|[[Hot-wire foam cutter, tabletop, 14"×12" ID:118]]
File:127.jpg|link=127|[[Oil can, blue ID:127]]
File:128.jpg|link=128|[[Painting tools ID:128]]
File:129.jpg|link=129|[[Pinball machine (Williams Road Kings) ID:129]]
File:130.jpg|link=130|[[Sandblasting cabinet, floor, blue (Powerfist) ID:130]]
File:131.jpg|link=131|[[Screwdriver magnetizer/demagnetizer (Wiha 40010) ID:131]]
File:132.jpg|link=132|[[Shop vacuum, orange ID:132]]
File:133.jpg|link=133|[[Staple gun (Arrow T-18) ID:133]]
File:122.jpg|link=122|[[Tile work surfaces ID:122]]
File:123.jpg|link=123|[[Tile work surfaces ID:123]]
File:134.jpg|link=134|[[Vacuum cart ID:134]]
File:136.jpg|link=136|[[Vacuum cleaner, portable ID:136]]
File:137.jpg|link=137|[[Vacuum pump (Edwards SpeediVac ED200) ID:137]]
File:161.jpg|link=161|[[Laminator (Scotch TL902) ID:161]]
File:166.jpg|link=166|[[Printer, 44" Large Format (HP DesignJet T1200), ID:166]]
File:169.png|link=169|[[ADS-B Base Station, FlightAware, ID:169]]
File:176.jpg|link=176|[[Vending machine, pop (Vendo 576) ID:176]]
File:177.jpg|link=177|[[Vending machine, snacks (Crane 173) ID:177]]
</gallery>

==Removed equipment==

In case they are brought back, or, so people who could have sworn we had a tool know it was removed.

<gallery style="background: darksalmon" mode="nolines">
File:6.jpg|[[Laser cutter, large (Rabbit Laser RL-80-1290) ID:6]]
File:3DP RapMan.jpg|[[3D printer (3D Systems RapMan)]]
File:3D printer, Come3D!.jpg|[[3D printer (Come3D!)]]
File:3DP Cupcake.jpg|[[3D printer (MakerBot Cupcake)]]
File:1.jpg|[[3D printer, FFF (IIIP) ID:1]]
File:3D printer, Nathan Ward's RepRap.jpg|[[3D printer, FFF (RepRap)]]
File:3D printer, Yin's Wanhao.jpg|[[3D printer, FFF (Wanhao Duplicator i3)]]
File:InVision si2.jpg|[[3D printer, MJM (3D Systems InVision si2)]]
File:NoImage.png|[[3D printer, SLA (mUVe 1) ID:5]]
File:Compressor Dewalt.jpg|[[Air compressor, 4-gallon (DeWalt)]]
File:Compressor Big.jpg|[[Air compressor, 17-gallon]]
File:110.jpg|[[Air compressor, 60-gallon (Campbell Hausfeld) ID:110]]
File:Reciprocating compressor.jpg|[[Air compressor, 80-gallon (Ingersoll Rand T30)]]
File:113.jpg|[[Air pump, foot-operated (Bell FootPumper) ID:113]]
File:Angle Grinder.jpg|[[Angle grinder (Kawasaki)]]
File:Anvil 75lb.jpg|[[Anvil]]
File:Bandsaw Horizontal.jpg|[[Bandsaw, metal, horizontal (Craftex B013N)]]
File:Bending Brake.jpg|[[Bending brake, 30" (Powerfist)]]
File:114.jpg|[[Bicycle tire jig ID:114]]
File:Buffer Benchtop.jpg|[[Buffer (Clarke 2H 5AB)]]
File:13.jpg|[[Counter (Fluke 1910A Multi-Counter) ID:13]]
File:Dewars.jpg|[[Dewars, 50-litre]]
File:Drill Dewalt.jpg|[[Drill, corded (DeWalt)]]
File:Pick N Place.jpg|[[Electronics assembly pick and place machine (Multitronics 2000LX)]]
File:Forge Propane 2.jpg|[[Forge, propane (Jim's)]]
File:43.jpg|[[Forge (Travis's) ID:43]]
File:NoImage.png|[[Forge, propane, pass-through ID:44]]
File:17.jpg|[[Function generator (Krohn–Hite 5100A) ID:17]]
File:Impact Driver.jpg|[[Impact driver (DeWalt)]]
File:7.jpg|[[Laser cutter, small ID:7]]
File:Lathe, Torrent T.72-42.jpg|[[Lathe, metal (Torrent T.72-42)]]
File:Lathe Mill.jpg|[[Lathe–mill combination (Craftex B2229)]]
File:Lathe Wood Mini.jpg|[[Lathe, wood (Haussmann)]]
File:MaxNC10.jpg|[[Milling machine, CNC, mini (MAXNC 10)]]
File:Audio mixing board.jpg|[[PA system (Dan Damron's)]]
File:22.jpg|[[Oscilloscope (Kikusui COS 5060) ID:22]]
File:50.jpg|[[Oxyacetylene torch, large ID:50]]
File:Parts washer, Powerfist 3.5 L.jpg|[[Parts washer, 3.5 L (Powerfist)]]
File:Plasma cutter.thumbnail.jpg|[[Plasma cutter, CNC (Kyle Paavola's)]]
File:Router Plunge Makita.jpg|[[Router, plunge (Makita 3612BR)]]
File:10.jpg|[[Press (Powerfist) ID:10]]
File:NoImage.png|[[Router table, wooden ID:81]]
File:87.jpg|[[87|Sander, random orbital (Skil 7492) ID:87]]
File:Chop Saw.jpg|[[Saw, compound mitre (Ryobi)]]
File:Chopsaw Metal.jpg|[[Saw, compound mitre, metal (Ryobi)]]
File:Reciprocating Saw.jpg|[[Saw, sabre (Mastercraft)]]
File:Skil Saw BD.jpg|[[Saw, handheld circular, 7 1/4" (Black & Decker)]]
File:Skil Saw Red.jpg|[[Saw, handheld circular (Skil)]]
File:90.jpg|[[Scroll saw (Mastercraft 55-6714-6) ID:90]]
File:119.jpg|[[Sewing machine, industrial (Relsew) ID:119]]
File:Shaper, metal.jpg|[[Shaper, 7"]]
File:Taps Grey.jpg|[[Tap & die set (Mastercraft)]]
File:OxyAce Mini.jpg|[[Torch, oxygen–acetylene, mini]]
File:32.jpg|[[UV photomasker (Dan's) ID:32]]
File:135.jpg|[[Vacuum pump ID:135]]
File:Vice Medium.jpg|[[Vise, medium (Irwin)]]
File:Welder MIG.jpg|[[Welder, MIG (Lincoln Weld-Pak 100)]]
File:55.jpg|[[Welder, stick, orange (Acklands 225 AC Sizzler) ID:55]]
File:109.jpg|[[Welder, Stick, AC/DC (Miller Thunderbolt XL) ID:109]]
File:74.jpg|[[Miter saw, compound, sliding (Hitachi) ID:74]]
File:142.jpg|[[Brake, shear, roller, 52" (Magnum) ID:142]]
File:146.jpg|[[Garment graphic printer, direct inject (Brother GT-361) ID:146]]
</gallery>

Tools we have

2024-07-01T17:40:21Z

Pat.spencer: /* Rapid prototyping tools */

Want to '''add a new tool'''? Follow [[Protospace Wiki:Adding new tools|this procedure]]!

We can always use new tools. Please feel free to [[contact information|contact Protospace]] to donate, arrange for pickup, or drop them off in person.

If you are interested in knowing what kind of tools we are looking for, we also have a member-managed [[Tools we want|tool wish list]], but your best bet on figuring out if we want something is simply asking on our [https://forum.protospace.ca forum].

We also have [[:Category:Tools|an alphabetically ordered and categorized tool catalog]].

__TOC__

==Rapid prototyping tools==

{{hatnote|Comparisons: [[our 3D printers]], [[our laser cutters]]}}

<gallery mode="nolines" widths="160" heights="160">
File:182.jpg|[[3D Printer, FFF (Bambu Lab P1S) ID:182]]
File:2.jpg|link=2|[[3D printer, FFF (ORD Bot Hadron) ID:2]]
File:159.jpg|link=159|[[3D printer, resin (Anycubic Photon 5.5) ID:159]]
File:170.jpg|link=170|[[3D_printer, resin (ELEGOO Saturn) ID:170]]
File:160.jpg|link=160|[[Curing station (Anycubic Wash and Cure Machine) ID:160]]
File:Thunder-51-01.jpg|link=178|[[Thunder Nova 51 Laser ID:178]]
File:107.jpg|link=107|[[Laser cutter (Trotec Speedy 300) ID:107]]
File:141.jpg|link=141|[[CNC router, mini (TD 3040) ID:141]]
File:Precix-CNC-001.jpg|[[CNC router, wood (Precix) ID:153]]
File:LongMill-on-Shelf-01.png|[[CNC router, benchtop (SIENCI LongMill) ID:143]]
</gallery>

==Automotive tools==

<gallery mode="nolines" widths="160" heights="160">
File:8.jpg|[[Floor jack, blue ID:8]]
File:9.jpg|[[Trolley jack and axle stand kit (Certified) ID:9]]
File:11.jpg|[[Socket set ID:11]]
File:162.jpeg|link=162|[[Bike stand (Feedback Sport) ID:162]]
File:181.jpeg|link=181|[[Blind hole bearings removal slide hammer ID:181]]
</gallery>

==Chemistry==

<gallery mode="nolines" widths="160" heights="160">
File:12.jpg|[[Oxygen concentrator (OGSI OG-15) ID:12]]
</gallery>

==Electronics equipment==

<gallery mode="nolines" widths="160" heights="160">
File:14.jpg|[[Counter (Lafayette 54517) ID:14]]
File:15.jpg|[[Decade box, capacitance (Servomex Controls Decade Capacitor Type B) ID:15]]
File:16.jpg|[[Function generator (John's) ID:16]]
File:18.jpg|[[Heat gun (Powerfist) ID:18]]
File:19.jpg|[[Logic analyzer (HP 1631D) ID:19]]
File:20.jpg|[[Multimeter, digital (Pro.Point 8344665) ID:20]]
File:167.jpg|[[Oscilloscope (Siglent SDS1104X-E) ID:167]]
File:23.jpg|[[Oscilloscope (Tektronix 2225) ID:23]]
File:24.jpg|[[Oscilloscope (Tektronix 2465A) ID:24]]
File:25.jpg|[[Oscilloscope, PC (Syscomp DSO-101) ID:25]]
File:26.jpg|[[Power supply, bench (GQ Electronics GQ-A305D) ID:26]]
File:27.jpg|[[Power supply, bench, 500 V (Heathkit PS-3) ID:27]]
File:28.jpg|[[Power supply, bench, 2-channel (TENMA 72-7245) ID:28]]
File:30.jpg|[[Hot-air rework station (GQ Electronics 5200) ID:30]]
File:31.jpg|[[Solder fume extractor (Metcal) ID:31]]
File:33.jpg|[[Waveform generator (Syscomp WGM-101) ID:33]]
File:34.jpg|[[Waveform monitor (Tektronix 1730) ID:34]]
File:145-Welcome-Monitor.png|[[Welcome Room Monitor ID:145]]
</gallery>

==Metalworking tools==

<gallery mode="nolines" widths="160" heights="160">
File:35.jpg|[[Angle grinder (DeWalt) ID:35]]
File:37.jpg|[[Bandsaw, metal, horizontal ID:37]]
File:165.jpg|[[Bandsaw, metal, horizontal (Westward UE-712) ID:165]]
File:39.jpg|[[Bench grinder (Powerfist) ID:39]]
File:40.jpg|[[Bench grinder (Trademaster PR14210) ID:40]]
File:151.jpg|[[Brake, box and pan, 24" (Magnum) ID:151]]
File:42.jpg|[[Drill press (Mastercraft) ID:42]]
File:45.jpg|[[Foundry, propane ID:45]]
File:121.jpg|[[Hydraulic press, 50-ton, electric ID:121]]
File:46.jpg|[[Lathe, metal (Challenger 1660G) ID:46]]
File:47.jpg|[[Lathe, miniature (Taig Microlathe II) ID:47]]
File:53.jpg|[[Metal shear (Magnum) ID:53]]
File:48.jpg|[[Milling machine (ACRA AM4V) ID:48]]
File:49.jpg|[[Milling machine, CNC (Tormach PCNC 1100) ID:49]]
File:173.png|[[Plasma Cutter (Hypertherm, Powermax85) ID:173]]
File:51.jpg|[[Plasma cutter, huge (Powercut 1500) ID:51]]
File:52.jpg|[[Plasma cutter, small (Miller Spectrum 375) ID:52]]
File:54.jpg|[[Vise, giant ID:54]]
File:56.jpg|[[Welding magnets ID:56]]
File:Metalworking pattern maker's vise.jpg|[[Metalworking pattern maker's vise]]
File:Metal drill press.jpg|[[HD gear driven drill press/mill]]
File:163.jpg|[[Pipe bender (Power Fist 12 ton hydraulic) ID:163]]
File:180.jpg|[[Metal Shear Brake Roll - (New Magnum 52) ID:180]]
</gallery>

==Woodworking and plasticworking tools==

<gallery mode="nolines" widths="160" heights="160">
File:171-Wood-Lathe-Jet.jpg|[[Wood Lathe, JET JWL-1236 ID:171]]
File:57.jpg|[[Bandsaw, green ID:57]]
File:61.jpg|[[Drill, hand, corded, black (Jobmate) ID:61]]
File:62.jpg|[[Drill, hand, corded, dark blue (Ryobi) ID:62]]
File:68.jpg|[[Drill, hand, corded (Makita DP3720) ID:68]]
File:69.jpg|[[Drill press, 8" (Jobmate) ID:69]]
File:70.jpg|[[Jigsaw, corded (Black & Decker) ID:70]]
File:72.jpg|[[Jigsaw (Skil) ID:72]]
File:75.jpg|[[Nailer, pneumatic, 2-in-1 ID:75]]
File:76.jpg|[[Plate joiner (Porter Cable 557) ID:76]]
File:140.jpg|[[Pocket hole jig (Kreg K3) ID:140]]
File:78.jpg|[[Rotary tool, corded (Mastercraft) ID:78]]
File:79.jpg|[[Rotary tool, cordless (Dremel) ID:79]]
File:124.jpg|[[Router table (Jeff's) ID:124]]
File:83.jpg|[[Sander, belt (Makita 9402) ID:83]]
File:85.jpg|[[Sander, detail (Ryobi) ID:85]]
File:106.jpg|[[Sander, drum (General International 15-250 M1) ID:106]]
File:138.jpg|[[Sander, random orbital (Ridgid R2601) ID:138]]
File:139.jpg|[[Sander, random orbital (Ridgid R2601) ID:139]]
File:88.jpg|[[Sander, straight-line/orbital (Black & Decker Deluxe) ID:88]]
File:89.jpg|[[Scroll saw (Dremel) ID:89]]
File:91.jpg|[[Table saw (Craftex CX201) ID:91]]
File:92.jpg|[[Thickness planer (Ryobi AP1301) ID:92]]
File:93.jpg|[[Vacuum, sawdust (Craftex CX404) ID:93]]
File:NoImage.png|[[Vise, wood ID:94]]
File:95.jpg|[[Vise, wood (Travis's) ID:95]]
File:Makita cordless jigsaw.jpg|cordless Makita jig saw
File:Ridgid random orbital sander (1 of 2, unknown which one).jpg|Ridgid random orbital sander (2 of these)
File:6" jointer.jpg|6" jointer
File:DeWalt sliding compound miter saw.jpg|12" Dewalt sliding compound miter saw
File:Wood tools sharpening station.jpg|A sharpening station with a plethora of tool sharpening grinders-jigs-etc
File:149.jpg|[[Drill press, floor mounted, variable speed ID:149]]
File:164.jpg|[[Handheld metal detector ID:164]]
File:168.jpg|[[Planer, 16" Auto Planer]]
File:172.jpg|[[Table saw (SawStop) ID:172]]
File:174.jpg|[[drying rack (coyle-made) ID:174]]
</gallery>

==Textile, Leather, Vinyl, and Media tools==

<gallery mode="nolines" widths="160" heights="160">
File:120.jpg|[[Sewing machine, domestic (Singer 1802) ID:120]]
File:183.png|[[Sewing Machine, Industrial Cylinder Arm Walking Foot, (Techsew TS-2750) ID:183]]
File:184.jpg|[[Skiving Machine, Bell Knife, (Techsew SK-4) ID:184]]
File:Singer 211G155.jpg|[[Sewing machine, industrial (Singer 211G155) ID:147]]
File:144.jpg|[[Embroidery machine, CNC (Tajima TEJT II-C NEO 1501) ID:144]]
File:150.jpg|[[Sewing/embroidery machine, computer controlled (Singer Futura CE-250) ID:150]]
File:156.jpg|[[Sewing machine, domestic (Janome HD-1000) ID:156]]
File:157.jpg|[[Serger, 4 thread (Singer 14U34B) ID:157]]
File:158.jpg|[[Serger, 4 thread, (Janome MyLock 634D) ID:158]]
File:148.jpg|[[Vinyl cutter, big (Graphtec FC8000-75) ID:148]]
File:NoImage.png|Vinyl cutter, small (Silhouette Cameo), on loan from Jamie Frost
File:154.jpg|[[Heat press, digital (Geo Knight and Co Inc K20S) ID:154]]
File:155.jpg|[[Heat press, auto release (Insta Graphic Systems 158) ID:155]]
File:166.jpg|[[Printer, 44" Large Format (HP DesignJet T1200), ID:166]]
</gallery>

==Measuring and inspection tools==

{{hatnote|See also: the [[#Electronics equipment|electronics equipment section on this page]] for electrical and electronic measurement and test equipment.}}

<gallery mode="nolines" widths="160" heights="160">
File:97.jpg|[[Inspection mirror, 18" gooseneck ID:97]]
File:98.jpg|[[Magnifier lamp, large, with lid ID:98]]
File:99.jpg|[[Magnifier lamp, large, without lid ID:99]]
File:100.jpg|[[Magnifier lamp, small, with lid ID:100]]
File:101.jpg|[[Measuring tapes ID:101]]
File:102.jpg|[[Rulers ID:102]]
File:103.jpg|[[Squares ID:103]]
File:104.jpg|[[Thermometer, infrared (H64) ID:104]]
</gallery>

==Miscellaneous tools==

<gallery mode="nolines" widths="160" heights="160">
File:111.jpg|link=111|[[Air compressor, 80-gallon (MAXair Premium) ID:111]]
File:112.jpg|link=112|[[Air compressor, silent ID:112]]
File:115.jpg|link=115|[[Engraver ID:115]]
File:116.jpg|link=116|[[Hand truck, red ID:116]]
File:117.jpg|link=117|[[Hot-wire foam cutter, handheld, 4.5"×5.5" (Woodland Scenics) ID:117]]
File:118.jpg|link=118|[[Hot-wire foam cutter, tabletop, 14"×12" ID:118]]
File:127.jpg|link=127|[[Oil can, blue ID:127]]
File:128.jpg|link=128|[[Painting tools ID:128]]
File:129.jpg|link=129|[[Pinball machine (Williams Road Kings) ID:129]]
File:130.jpg|link=130|[[Sandblasting cabinet, floor, blue (Powerfist) ID:130]]
File:131.jpg|link=131|[[Screwdriver magnetizer/demagnetizer (Wiha 40010) ID:131]]
File:132.jpg|link=132|[[Shop vacuum, orange ID:132]]
File:133.jpg|link=133|[[Staple gun (Arrow T-18) ID:133]]
File:122.jpg|link=122|[[Tile work surfaces ID:122]]
File:123.jpg|link=123|[[Tile work surfaces ID:123]]
File:134.jpg|link=134|[[Vacuum cart ID:134]]
File:136.jpg|link=136|[[Vacuum cleaner, portable ID:136]]
File:137.jpg|link=137|[[Vacuum pump (Edwards SpeediVac ED200) ID:137]]
File:161.jpg|link=161|[[Laminator (Scotch TL902) ID:161]]
File:166.jpg|link=166|[[Printer, 44" Large Format (HP DesignJet T1200), ID:166]]
File:169.png|link=169|[[ADS-B Base Station, FlightAware, ID:169]]
File:176.jpg|link=176|[[Vending machine, pop (Vendo 576) ID:176]]
File:177.jpg|link=177|[[Vending machine, snacks (Crane 173) ID:177]]
</gallery>

==Removed equipment==

In case they are brought back, or, so people who could have sworn we had a tool know it was removed.

<gallery style="background: darksalmon" mode="nolines">
File:6.jpg|[[Laser cutter, large (Rabbit Laser RL-80-1290) ID:6]]
File:3DP RapMan.jpg|[[3D printer (3D Systems RapMan)]]
File:3D printer, Come3D!.jpg|[[3D printer (Come3D!)]]
File:3DP Cupcake.jpg|[[3D printer (MakerBot Cupcake)]]
File:1.jpg|[[3D printer, FFF (IIIP) ID:1]]
File:3D printer, Nathan Ward's RepRap.jpg|[[3D printer, FFF (RepRap)]]
File:3D printer, Yin's Wanhao.jpg|[[3D printer, FFF (Wanhao Duplicator i3)]]
File:InVision si2.jpg|[[3D printer, MJM (3D Systems InVision si2)]]
File:NoImage.png|[[3D printer, SLA (mUVe 1) ID:5]]
File:Compressor Dewalt.jpg|[[Air compressor, 4-gallon (DeWalt)]]
File:Compressor Big.jpg|[[Air compressor, 17-gallon]]
File:110.jpg|[[Air compressor, 60-gallon (Campbell Hausfeld) ID:110]]
File:Reciprocating compressor.jpg|[[Air compressor, 80-gallon (Ingersoll Rand T30)]]
File:113.jpg|[[Air pump, foot-operated (Bell FootPumper) ID:113]]
File:Angle Grinder.jpg|[[Angle grinder (Kawasaki)]]
File:Anvil 75lb.jpg|[[Anvil]]
File:Bandsaw Horizontal.jpg|[[Bandsaw, metal, horizontal (Craftex B013N)]]
File:Bending Brake.jpg|[[Bending brake, 30" (Powerfist)]]
File:114.jpg|[[Bicycle tire jig ID:114]]
File:Buffer Benchtop.jpg|[[Buffer (Clarke 2H 5AB)]]
File:13.jpg|[[Counter (Fluke 1910A Multi-Counter) ID:13]]
File:Dewars.jpg|[[Dewars, 50-litre]]
File:Drill Dewalt.jpg|[[Drill, corded (DeWalt)]]
File:Pick N Place.jpg|[[Electronics assembly pick and place machine (Multitronics 2000LX)]]
File:Forge Propane 2.jpg|[[Forge, propane (Jim's)]]
File:43.jpg|[[Forge (Travis's) ID:43]]
File:NoImage.png|[[Forge, propane, pass-through ID:44]]
File:17.jpg|[[Function generator (Krohn–Hite 5100A) ID:17]]
File:Impact Driver.jpg|[[Impact driver (DeWalt)]]
File:7.jpg|[[Laser cutter, small ID:7]]
File:Lathe, Torrent T.72-42.jpg|[[Lathe, metal (Torrent T.72-42)]]
File:Lathe Mill.jpg|[[Lathe–mill combination (Craftex B2229)]]
File:Lathe Wood Mini.jpg|[[Lathe, wood (Haussmann)]]
File:MaxNC10.jpg|[[Milling machine, CNC, mini (MAXNC 10)]]
File:Audio mixing board.jpg|[[PA system (Dan Damron's)]]
File:22.jpg|[[Oscilloscope (Kikusui COS 5060) ID:22]]
File:50.jpg|[[Oxyacetylene torch, large ID:50]]
File:Parts washer, Powerfist 3.5 L.jpg|[[Parts washer, 3.5 L (Powerfist)]]
File:Plasma cutter.thumbnail.jpg|[[Plasma cutter, CNC (Kyle Paavola's)]]
File:Router Plunge Makita.jpg|[[Router, plunge (Makita 3612BR)]]
File:10.jpg|[[Press (Powerfist) ID:10]]
File:NoImage.png|[[Router table, wooden ID:81]]
File:87.jpg|[[87|Sander, random orbital (Skil 7492) ID:87]]
File:Chop Saw.jpg|[[Saw, compound mitre (Ryobi)]]
File:Chopsaw Metal.jpg|[[Saw, compound mitre, metal (Ryobi)]]
File:Reciprocating Saw.jpg|[[Saw, sabre (Mastercraft)]]
File:Skil Saw BD.jpg|[[Saw, handheld circular, 7 1/4" (Black & Decker)]]
File:Skil Saw Red.jpg|[[Saw, handheld circular (Skil)]]
File:90.jpg|[[Scroll saw (Mastercraft 55-6714-6) ID:90]]
File:119.jpg|[[Sewing machine, industrial (Relsew) ID:119]]
File:Shaper, metal.jpg|[[Shaper, 7"]]
File:Taps Grey.jpg|[[Tap & die set (Mastercraft)]]
File:OxyAce Mini.jpg|[[Torch, oxygen–acetylene, mini]]
File:32.jpg|[[UV photomasker (Dan's) ID:32]]
File:135.jpg|[[Vacuum pump ID:135]]
File:Vice Medium.jpg|[[Vise, medium (Irwin)]]
File:Welder MIG.jpg|[[Welder, MIG (Lincoln Weld-Pak 100)]]
File:55.jpg|[[Welder, stick, orange (Acklands 225 AC Sizzler) ID:55]]
File:109.jpg|[[Welder, Stick, AC/DC (Miller Thunderbolt XL) ID:109]]
File:74.jpg|[[Miter saw, compound, sliding (Hitachi) ID:74]]
File:142.jpg|[[Brake, shear, roller, 52" (Magnum) ID:142]]
File:146.jpg|[[Garment graphic printer, direct inject (Brother GT-361) ID:146]]
</gallery>

Tools we have

2024-07-01T17:39:18Z

Pat.spencer: /* Rapid prototyping tools */ Added "link=##|"

Want to '''add a new tool'''? Follow [[Protospace Wiki:Adding new tools|this procedure]]!

We can always use new tools. Please feel free to [[contact information|contact Protospace]] to donate, arrange for pickup, or drop them off in person.

If you are interested in knowing what kind of tools we are looking for, we also have a member-managed [[Tools we want|tool wish list]], but your best bet on figuring out if we want something is simply asking on our [https://forum.protospace.ca forum].

We also have [[:Category:Tools|an alphabetically ordered and categorized tool catalog]].

__TOC__

==Rapid prototyping tools==

{{hatnote|Comparisons: [[our 3D printers]], [[our laser cutters]]}}

<gallery mode="nolines" widths="160" heights="160">
File:182.jpg|[[3D Printer, FFF (Bambu Lab P1S) ID:182]]
File:2.jpg|link=2|[[3D printer, FFF (ORD Bot Hadron) ID:2]]
File:159.jpg|link=159|[[3D printer, resin (Anycubic Photon 5.5) ID:159]]
File:170.jpg|link=170|[[3D_printer, resin (ELEGOO Saturn) ID:170]]
File:160.jpg|link=160|[[Curing station (Anycubic Wash and Cure Machine) ID:160]]
File:Thunder-51-01.jpg|[[Thunder Nova 51 Laser ID:178]]
File:107.jpg|link=107|[[Laser cutter (Trotec Speedy 300) ID:107]]
File:141.jpg|link=141|[[CNC router, mini (TD 3040) ID:141]]
File:Precix-CNC-001.jpg|[[CNC router, wood (Precix) ID:153]]
File:LongMill-on-Shelf-01.png|[[CNC router, benchtop (SIENCI LongMill) ID:143]]
</gallery>

==Automotive tools==

<gallery mode="nolines" widths="160" heights="160">
File:8.jpg|[[Floor jack, blue ID:8]]
File:9.jpg|[[Trolley jack and axle stand kit (Certified) ID:9]]
File:11.jpg|[[Socket set ID:11]]
File:162.jpeg|link=162|[[Bike stand (Feedback Sport) ID:162]]
File:181.jpeg|link=181|[[Blind hole bearings removal slide hammer ID:181]]
</gallery>

==Chemistry==

<gallery mode="nolines" widths="160" heights="160">
File:12.jpg|[[Oxygen concentrator (OGSI OG-15) ID:12]]
</gallery>

==Electronics equipment==

<gallery mode="nolines" widths="160" heights="160">
File:14.jpg|[[Counter (Lafayette 54517) ID:14]]
File:15.jpg|[[Decade box, capacitance (Servomex Controls Decade Capacitor Type B) ID:15]]
File:16.jpg|[[Function generator (John's) ID:16]]
File:18.jpg|[[Heat gun (Powerfist) ID:18]]
File:19.jpg|[[Logic analyzer (HP 1631D) ID:19]]
File:20.jpg|[[Multimeter, digital (Pro.Point 8344665) ID:20]]
File:167.jpg|[[Oscilloscope (Siglent SDS1104X-E) ID:167]]
File:23.jpg|[[Oscilloscope (Tektronix 2225) ID:23]]
File:24.jpg|[[Oscilloscope (Tektronix 2465A) ID:24]]
File:25.jpg|[[Oscilloscope, PC (Syscomp DSO-101) ID:25]]
File:26.jpg|[[Power supply, bench (GQ Electronics GQ-A305D) ID:26]]
File:27.jpg|[[Power supply, bench, 500 V (Heathkit PS-3) ID:27]]
File:28.jpg|[[Power supply, bench, 2-channel (TENMA 72-7245) ID:28]]
File:30.jpg|[[Hot-air rework station (GQ Electronics 5200) ID:30]]
File:31.jpg|[[Solder fume extractor (Metcal) ID:31]]
File:33.jpg|[[Waveform generator (Syscomp WGM-101) ID:33]]
File:34.jpg|[[Waveform monitor (Tektronix 1730) ID:34]]
File:145-Welcome-Monitor.png|[[Welcome Room Monitor ID:145]]
</gallery>

==Metalworking tools==

<gallery mode="nolines" widths="160" heights="160">
File:35.jpg|[[Angle grinder (DeWalt) ID:35]]
File:37.jpg|[[Bandsaw, metal, horizontal ID:37]]
File:165.jpg|[[Bandsaw, metal, horizontal (Westward UE-712) ID:165]]
File:39.jpg|[[Bench grinder (Powerfist) ID:39]]
File:40.jpg|[[Bench grinder (Trademaster PR14210) ID:40]]
File:151.jpg|[[Brake, box and pan, 24" (Magnum) ID:151]]
File:42.jpg|[[Drill press (Mastercraft) ID:42]]
File:45.jpg|[[Foundry, propane ID:45]]
File:121.jpg|[[Hydraulic press, 50-ton, electric ID:121]]
File:46.jpg|[[Lathe, metal (Challenger 1660G) ID:46]]
File:47.jpg|[[Lathe, miniature (Taig Microlathe II) ID:47]]
File:53.jpg|[[Metal shear (Magnum) ID:53]]
File:48.jpg|[[Milling machine (ACRA AM4V) ID:48]]
File:49.jpg|[[Milling machine, CNC (Tormach PCNC 1100) ID:49]]
File:173.png|[[Plasma Cutter (Hypertherm, Powermax85) ID:173]]
File:51.jpg|[[Plasma cutter, huge (Powercut 1500) ID:51]]
File:52.jpg|[[Plasma cutter, small (Miller Spectrum 375) ID:52]]
File:54.jpg|[[Vise, giant ID:54]]
File:56.jpg|[[Welding magnets ID:56]]
File:Metalworking pattern maker's vise.jpg|[[Metalworking pattern maker's vise]]
File:Metal drill press.jpg|[[HD gear driven drill press/mill]]
File:163.jpg|[[Pipe bender (Power Fist 12 ton hydraulic) ID:163]]
File:180.jpg|[[Metal Shear Brake Roll - (New Magnum 52) ID:180]]
</gallery>

==Woodworking and plasticworking tools==

<gallery mode="nolines" widths="160" heights="160">
File:171-Wood-Lathe-Jet.jpg|[[Wood Lathe, JET JWL-1236 ID:171]]
File:57.jpg|[[Bandsaw, green ID:57]]
File:61.jpg|[[Drill, hand, corded, black (Jobmate) ID:61]]
File:62.jpg|[[Drill, hand, corded, dark blue (Ryobi) ID:62]]
File:68.jpg|[[Drill, hand, corded (Makita DP3720) ID:68]]
File:69.jpg|[[Drill press, 8" (Jobmate) ID:69]]
File:70.jpg|[[Jigsaw, corded (Black & Decker) ID:70]]
File:72.jpg|[[Jigsaw (Skil) ID:72]]
File:75.jpg|[[Nailer, pneumatic, 2-in-1 ID:75]]
File:76.jpg|[[Plate joiner (Porter Cable 557) ID:76]]
File:140.jpg|[[Pocket hole jig (Kreg K3) ID:140]]
File:78.jpg|[[Rotary tool, corded (Mastercraft) ID:78]]
File:79.jpg|[[Rotary tool, cordless (Dremel) ID:79]]
File:124.jpg|[[Router table (Jeff's) ID:124]]
File:83.jpg|[[Sander, belt (Makita 9402) ID:83]]
File:85.jpg|[[Sander, detail (Ryobi) ID:85]]
File:106.jpg|[[Sander, drum (General International 15-250 M1) ID:106]]
File:138.jpg|[[Sander, random orbital (Ridgid R2601) ID:138]]
File:139.jpg|[[Sander, random orbital (Ridgid R2601) ID:139]]
File:88.jpg|[[Sander, straight-line/orbital (Black & Decker Deluxe) ID:88]]
File:89.jpg|[[Scroll saw (Dremel) ID:89]]
File:91.jpg|[[Table saw (Craftex CX201) ID:91]]
File:92.jpg|[[Thickness planer (Ryobi AP1301) ID:92]]
File:93.jpg|[[Vacuum, sawdust (Craftex CX404) ID:93]]
File:NoImage.png|[[Vise, wood ID:94]]
File:95.jpg|[[Vise, wood (Travis's) ID:95]]
File:Makita cordless jigsaw.jpg|cordless Makita jig saw
File:Ridgid random orbital sander (1 of 2, unknown which one).jpg|Ridgid random orbital sander (2 of these)
File:6" jointer.jpg|6" jointer
File:DeWalt sliding compound miter saw.jpg|12" Dewalt sliding compound miter saw
File:Wood tools sharpening station.jpg|A sharpening station with a plethora of tool sharpening grinders-jigs-etc
File:149.jpg|[[Drill press, floor mounted, variable speed ID:149]]
File:164.jpg|[[Handheld metal detector ID:164]]
File:168.jpg|[[Planer, 16" Auto Planer]]
File:172.jpg|[[Table saw (SawStop) ID:172]]
File:174.jpg|[[drying rack (coyle-made) ID:174]]
</gallery>

==Textile, Leather, Vinyl, and Media tools==

<gallery mode="nolines" widths="160" heights="160">
File:120.jpg|[[Sewing machine, domestic (Singer 1802) ID:120]]
File:183.png|[[Sewing Machine, Industrial Cylinder Arm Walking Foot, (Techsew TS-2750) ID:183]]
File:184.jpg|[[Skiving Machine, Bell Knife, (Techsew SK-4) ID:184]]
File:Singer 211G155.jpg|[[Sewing machine, industrial (Singer 211G155) ID:147]]
File:144.jpg|[[Embroidery machine, CNC (Tajima TEJT II-C NEO 1501) ID:144]]
File:150.jpg|[[Sewing/embroidery machine, computer controlled (Singer Futura CE-250) ID:150]]
File:156.jpg|[[Sewing machine, domestic (Janome HD-1000) ID:156]]
File:157.jpg|[[Serger, 4 thread (Singer 14U34B) ID:157]]
File:158.jpg|[[Serger, 4 thread, (Janome MyLock 634D) ID:158]]
File:148.jpg|[[Vinyl cutter, big (Graphtec FC8000-75) ID:148]]
File:NoImage.png|Vinyl cutter, small (Silhouette Cameo), on loan from Jamie Frost
File:154.jpg|[[Heat press, digital (Geo Knight and Co Inc K20S) ID:154]]
File:155.jpg|[[Heat press, auto release (Insta Graphic Systems 158) ID:155]]
File:166.jpg|[[Printer, 44" Large Format (HP DesignJet T1200), ID:166]]
</gallery>

==Measuring and inspection tools==

{{hatnote|See also: the [[#Electronics equipment|electronics equipment section on this page]] for electrical and electronic measurement and test equipment.}}

<gallery mode="nolines" widths="160" heights="160">
File:97.jpg|[[Inspection mirror, 18" gooseneck ID:97]]
File:98.jpg|[[Magnifier lamp, large, with lid ID:98]]
File:99.jpg|[[Magnifier lamp, large, without lid ID:99]]
File:100.jpg|[[Magnifier lamp, small, with lid ID:100]]
File:101.jpg|[[Measuring tapes ID:101]]
File:102.jpg|[[Rulers ID:102]]
File:103.jpg|[[Squares ID:103]]
File:104.jpg|[[Thermometer, infrared (H64) ID:104]]
</gallery>

==Miscellaneous tools==

<gallery mode="nolines" widths="160" heights="160">
File:111.jpg|link=111|[[Air compressor, 80-gallon (MAXair Premium) ID:111]]
File:112.jpg|link=112|[[Air compressor, silent ID:112]]
File:115.jpg|link=115|[[Engraver ID:115]]
File:116.jpg|link=116|[[Hand truck, red ID:116]]
File:117.jpg|link=117|[[Hot-wire foam cutter, handheld, 4.5"×5.5" (Woodland Scenics) ID:117]]
File:118.jpg|link=118|[[Hot-wire foam cutter, tabletop, 14"×12" ID:118]]
File:127.jpg|link=127|[[Oil can, blue ID:127]]
File:128.jpg|link=128|[[Painting tools ID:128]]
File:129.jpg|link=129|[[Pinball machine (Williams Road Kings) ID:129]]
File:130.jpg|link=130|[[Sandblasting cabinet, floor, blue (Powerfist) ID:130]]
File:131.jpg|link=131|[[Screwdriver magnetizer/demagnetizer (Wiha 40010) ID:131]]
File:132.jpg|link=132|[[Shop vacuum, orange ID:132]]
File:133.jpg|link=133|[[Staple gun (Arrow T-18) ID:133]]
File:122.jpg|link=122|[[Tile work surfaces ID:122]]
File:123.jpg|link=123|[[Tile work surfaces ID:123]]
File:134.jpg|link=134|[[Vacuum cart ID:134]]
File:136.jpg|link=136|[[Vacuum cleaner, portable ID:136]]
File:137.jpg|link=137|[[Vacuum pump (Edwards SpeediVac ED200) ID:137]]
File:161.jpg|link=161|[[Laminator (Scotch TL902) ID:161]]
File:166.jpg|link=166|[[Printer, 44" Large Format (HP DesignJet T1200), ID:166]]
File:169.png|link=169|[[ADS-B Base Station, FlightAware, ID:169]]
File:176.jpg|link=176|[[Vending machine, pop (Vendo 576) ID:176]]
File:177.jpg|link=177|[[Vending machine, snacks (Crane 173) ID:177]]
</gallery>

==Removed equipment==

In case they are brought back, or, so people who could have sworn we had a tool know it was removed.

<gallery style="background: darksalmon" mode="nolines">
File:6.jpg|[[Laser cutter, large (Rabbit Laser RL-80-1290) ID:6]]
File:3DP RapMan.jpg|[[3D printer (3D Systems RapMan)]]
File:3D printer, Come3D!.jpg|[[3D printer (Come3D!)]]
File:3DP Cupcake.jpg|[[3D printer (MakerBot Cupcake)]]
File:1.jpg|[[3D printer, FFF (IIIP) ID:1]]
File:3D printer, Nathan Ward's RepRap.jpg|[[3D printer, FFF (RepRap)]]
File:3D printer, Yin's Wanhao.jpg|[[3D printer, FFF (Wanhao Duplicator i3)]]
File:InVision si2.jpg|[[3D printer, MJM (3D Systems InVision si2)]]
File:NoImage.png|[[3D printer, SLA (mUVe 1) ID:5]]
File:Compressor Dewalt.jpg|[[Air compressor, 4-gallon (DeWalt)]]
File:Compressor Big.jpg|[[Air compressor, 17-gallon]]
File:110.jpg|[[Air compressor, 60-gallon (Campbell Hausfeld) ID:110]]
File:Reciprocating compressor.jpg|[[Air compressor, 80-gallon (Ingersoll Rand T30)]]
File:113.jpg|[[Air pump, foot-operated (Bell FootPumper) ID:113]]
File:Angle Grinder.jpg|[[Angle grinder (Kawasaki)]]
File:Anvil 75lb.jpg|[[Anvil]]
File:Bandsaw Horizontal.jpg|[[Bandsaw, metal, horizontal (Craftex B013N)]]
File:Bending Brake.jpg|[[Bending brake, 30" (Powerfist)]]
File:114.jpg|[[Bicycle tire jig ID:114]]
File:Buffer Benchtop.jpg|[[Buffer (Clarke 2H 5AB)]]
File:13.jpg|[[Counter (Fluke 1910A Multi-Counter) ID:13]]
File:Dewars.jpg|[[Dewars, 50-litre]]
File:Drill Dewalt.jpg|[[Drill, corded (DeWalt)]]
File:Pick N Place.jpg|[[Electronics assembly pick and place machine (Multitronics 2000LX)]]
File:Forge Propane 2.jpg|[[Forge, propane (Jim's)]]
File:43.jpg|[[Forge (Travis's) ID:43]]
File:NoImage.png|[[Forge, propane, pass-through ID:44]]
File:17.jpg|[[Function generator (Krohn–Hite 5100A) ID:17]]
File:Impact Driver.jpg|[[Impact driver (DeWalt)]]
File:7.jpg|[[Laser cutter, small ID:7]]
File:Lathe, Torrent T.72-42.jpg|[[Lathe, metal (Torrent T.72-42)]]
File:Lathe Mill.jpg|[[Lathe–mill combination (Craftex B2229)]]
File:Lathe Wood Mini.jpg|[[Lathe, wood (Haussmann)]]
File:MaxNC10.jpg|[[Milling machine, CNC, mini (MAXNC 10)]]
File:Audio mixing board.jpg|[[PA system (Dan Damron's)]]
File:22.jpg|[[Oscilloscope (Kikusui COS 5060) ID:22]]
File:50.jpg|[[Oxyacetylene torch, large ID:50]]
File:Parts washer, Powerfist 3.5 L.jpg|[[Parts washer, 3.5 L (Powerfist)]]
File:Plasma cutter.thumbnail.jpg|[[Plasma cutter, CNC (Kyle Paavola's)]]
File:Router Plunge Makita.jpg|[[Router, plunge (Makita 3612BR)]]
File:10.jpg|[[Press (Powerfist) ID:10]]
File:NoImage.png|[[Router table, wooden ID:81]]
File:87.jpg|[[87|Sander, random orbital (Skil 7492) ID:87]]
File:Chop Saw.jpg|[[Saw, compound mitre (Ryobi)]]
File:Chopsaw Metal.jpg|[[Saw, compound mitre, metal (Ryobi)]]
File:Reciprocating Saw.jpg|[[Saw, sabre (Mastercraft)]]
File:Skil Saw BD.jpg|[[Saw, handheld circular, 7 1/4" (Black & Decker)]]
File:Skil Saw Red.jpg|[[Saw, handheld circular (Skil)]]
File:90.jpg|[[Scroll saw (Mastercraft 55-6714-6) ID:90]]
File:119.jpg|[[Sewing machine, industrial (Relsew) ID:119]]
File:Shaper, metal.jpg|[[Shaper, 7"]]
File:Taps Grey.jpg|[[Tap & die set (Mastercraft)]]
File:OxyAce Mini.jpg|[[Torch, oxygen–acetylene, mini]]
File:32.jpg|[[UV photomasker (Dan's) ID:32]]
File:135.jpg|[[Vacuum pump ID:135]]
File:Vice Medium.jpg|[[Vise, medium (Irwin)]]
File:Welder MIG.jpg|[[Welder, MIG (Lincoln Weld-Pak 100)]]
File:55.jpg|[[Welder, stick, orange (Acklands 225 AC Sizzler) ID:55]]
File:109.jpg|[[Welder, Stick, AC/DC (Miller Thunderbolt XL) ID:109]]
File:74.jpg|[[Miter saw, compound, sliding (Hitachi) ID:74]]
File:142.jpg|[[Brake, shear, roller, 52" (Magnum) ID:142]]
File:146.jpg|[[Garment graphic printer, direct inject (Brother GT-361) ID:146]]
</gallery>

Tools we have

2024-03-20T04:59:06Z

Pat.spencer: /* Miscellaneous tools */ Add links=###

Want to '''add a new tool'''? Follow [[Protospace Wiki:Adding new tools|this procedure]]!

We can always use new tools. Please feel free to [[contact information|contact Protospace]] to donate, arrange for pickup, or drop them off in person.

If you are interested in knowing what kind of tools we are looking for, we also have a member-managed [[Tools we want|tool wish list]], but your best bet on figuring out if we want something is simply asking on our [https://forum.protospace.ca forum].

We also have [[:Category:Tools|an alphabetically ordered and categorized tool catalog]].

__TOC__

==Rapid prototyping tools==

{{hatnote|Comparisons: [[our 3D printers]], [[our laser cutters]]}}

<gallery mode="nolines" widths="160" heights="160">
File:2.jpg|link=2|[[3D printer, FFF (ORD Bot Hadron) ID:2]]
File:3.jpg|link=3|[[3D printer, FFF (PrusaMD) ID:3]]
File:159.jpg|link=159|[[3D printer, resin (Anycubic Photon 5.5) ID:159]]
File:170.jpg|link=170|[[3D_printer, resin (ELEGOO Saturn) ID:170]]
File:160.jpg|link=160|[[Curing station (Anycubic Wash and Cure Machine) ID:160]]
File:Thunder-51-01.jpg|link=178|[[Thunder Nova 51 Laser ID:178]]
File:107.jpg|link=107|[[Laser cutter (Trotec Speedy 300) ID:107]]
File:141.jpg|link=141|[[CNC router, mini (TD 3040) ID:141]]
File:Precix-CNC-001.jpg|link=153|[[CNC router, wood (Precix) ID:153]]
File:LongMill-on-Shelf-01.png|link=143|[[CNC router, benchtop (SIENCI LongMill) ID:143]]
</gallery>

==Automotive tools==

<gallery mode="nolines" widths="160" heights="160">
File:8.jpg|[[Floor jack, blue ID:8]]
File:9.jpg|[[Trolley jack and axle stand kit (Certified) ID:9]]
File:11.jpg|[[Socket set ID:11]]
File:162.jpeg|link=162|[[Bike stand (Feedback Sport) ID:162]]
</gallery>

==Chemistry==

<gallery mode="nolines" widths="160" heights="160">
File:12.jpg|[[Oxygen concentrator (OGSI OG-15) ID:12]]
</gallery>

==Electronics equipment==

<gallery mode="nolines" widths="160" heights="160">
File:14.jpg|[[Counter (Lafayette 54517) ID:14]]
File:15.jpg|[[Decade box, capacitance (Servomex Controls Decade Capacitor Type B) ID:15]]
File:16.jpg|[[Function generator (John's) ID:16]]
File:18.jpg|[[Heat gun (Powerfist) ID:18]]
File:19.jpg|[[Logic analyzer (HP 1631D) ID:19]]
File:20.jpg|[[Multimeter, digital (Pro.Point 8344665) ID:20]]
File:167.jpg|[[Oscilloscope (Siglent SDS1104X-E) ID:167]]
File:23.jpg|[[Oscilloscope (Tektronix 2225) ID:23]]
File:24.jpg|[[Oscilloscope (Tektronix 2465A) ID:24]]
File:25.jpg|[[Oscilloscope, PC (Syscomp DSO-101) ID:25]]
File:26.jpg|[[Power supply, bench (GQ Electronics GQ-A305D) ID:26]]
File:27.jpg|[[Power supply, bench, 500 V (Heathkit PS-3) ID:27]]
File:28.jpg|[[Power supply, bench, 2-channel (TENMA 72-7245) ID:28]]
File:30.jpg|[[Hot-air rework station (GQ Electronics 5200) ID:30]]
File:31.jpg|[[Solder fume extractor (Metcal) ID:31]]
File:33.jpg|[[Waveform generator (Syscomp WGM-101) ID:33]]
File:34.jpg|[[Waveform monitor (Tektronix 1730) ID:34]]
File:145-Welcome-Monitor.png|[[Welcome Room Monitor ID:145]]
</gallery>

==Metalworking tools==

<gallery mode="nolines" widths="160" heights="160">
File:35.jpg|[[Angle grinder (DeWalt) ID:35]]
File:37.jpg|[[Bandsaw, metal, horizontal ID:37]]
File:165.jpg|[[Bandsaw, metal, horizontal (Westward UE-712) ID:165]]
File:39.jpg|[[Bench grinder (Powerfist) ID:39]]
File:40.jpg|[[Bench grinder (Trademaster PR14210) ID:40]]
File:151.jpg|[[Brake, box and pan, 24" (Magnum) ID:151]]
File:42.jpg|[[Drill press (Mastercraft) ID:42]]
File:45.jpg|[[Foundry, propane ID:45]]
File:121.jpg|[[Hydraulic press, 50-ton, electric ID:121]]
File:46.jpg|[[Lathe, metal (Challenger 1660G) ID:46]]
File:47.jpg|[[Lathe, miniature (Taig Microlathe II) ID:47]]
File:53.jpg|[[Metal shear (Magnum) ID:53]]
File:48.jpg|[[Milling machine (ACRA AM4V) ID:48]]
File:49.jpg|[[Milling machine, CNC (Tormach PCNC 1100) ID:49]]
File:173.png|[[Plasma Cutter (Hypertherm, Powermax85) ID:173]]
File:51.jpg|[[Plasma cutter, huge (Powercut 1500) ID:51]]
File:52.jpg|[[Plasma cutter, small (Miller Spectrum 375) ID:52]]
File:54.jpg|[[Vise, giant ID:54]]
File:56.jpg|[[Welding magnets ID:56]]
File:Metalworking pattern maker's vise.jpg|[[Metalworking pattern maker's vise]]
File:Metal drill press.jpg|[[HD gear driven drill press/mill]]
File:163.jpg|[[Pipe bender (Power Fist 12 ton hydraulic) ID:163]]
</gallery>

==Woodworking and plasticworking tools==

<gallery mode="nolines" widths="160" heights="160">
File:171-Wood-Lathe-Jet.jpg|[[Wood Lathe, JET JWL-1236 ID:171]]
File:57.jpg|[[Bandsaw, green ID:57]]
File:59.jpg|[[Clamps ID:59]]
File:61.jpg|[[Drill, hand, corded, black (Jobmate) ID:61]]
File:62.jpg|[[Drill, hand, corded, dark blue (Ryobi) ID:62]]
File:67.jpg|[[Drill, hand, cordless (DeWalt) ID:67]]
File:68.jpg|[[Drill, hand, corded (Makita DP3720) ID:68]]
File:69.jpg|[[Drill press, 8" (Jobmate) ID:69]]
File:70.jpg|[[Jigsaw, corded (Black & Decker) ID:70]]
File:72.jpg|[[Jigsaw (Skil) ID:72]]
File:75.jpg|[[Nailer, pneumatic, 2-in-1 ID:75]]
File:108.jpg|[[Planer (Jet JPM-13CS) ID:108]]
File:76.jpg|[[Plate joiner (Porter Cable 557) ID:76]]
File:140.jpg|[[Pocket hole jig (Kreg K3) ID:140]]
File:78.jpg|[[Rotary tool, corded (Mastercraft) ID:78]]
File:79.jpg|[[Rotary tool, cordless (Dremel) ID:79]]
File:124.jpg|[[Router table (Jeff's) ID:124]]
File:83.jpg|[[Sander, belt (Makita 9402) ID:83]]
File:84.jpg|[[Sander, belt/disc (Dremel 730) ID:84]]
File:85.jpg|[[Sander, detail (Ryobi) ID:85]]
File:106.jpg|[[Sander, drum (General International 15-250 M1) ID:106]]
File:138.jpg|[[Sander, random orbital (Ridgid R2601) ID:138]]
File:139.jpg|[[Sander, random orbital (Ridgid R2601) ID:139]]
File:88.jpg|[[Sander, straight-line/orbital (Black & Decker Deluxe) ID:88]]
File:89.jpg|[[Scroll saw (Dremel) ID:89]]
File:91.jpg|[[Table saw (Craftex CX201) ID:91]]
File:92.jpg|[[Thickness planer (Ryobi AP1301) ID:92]]
File:93.jpg|[[Vacuum, sawdust (Craftex CX404) ID:93]]
File:NoImage.png|[[Vise, wood ID:94]]
File:95.jpg|[[Vise, wood (Travis's) ID:95]]
File:Makita cordless jigsaw.jpg|cordless Makita jig saw
File:Ridgid random orbital sander (1 of 2, unknown which one).jpg|Ridgid random orbital sander (2 of these)
File:6" jointer.jpg|6" jointer
File:DeWalt sliding compound miter saw.jpg|12" Dewalt sliding compound miter saw
File:Wood tools sharpening station.jpg|A sharpening station with a plethora of tool sharpening grinders-jigs-etc
File:149.jpg|[[Drill press, floor mounted, variable speed ID:149]]
File:164.jpg|[[Handheld metal detector ID:164]]
File:168.jpg|[[Planer, 16" Auto Planer]]
File:172.jpg|[[Table saw (SawStop) ID:172]]
File:174.jpg|[[drying rack (coyle-made) ID:174]]
</gallery>

==Textile, Vinyl, and Media tools==

<gallery mode="nolines" widths="160" heights="160">
File:120.jpg|[[Sewing machine, domestic (Singer 1802) ID:120]]
File:Singer 211G155.jpg|[[Sewing machine, industrial (Singer 211G155) ID:147]]
File:144.jpg|[[Embroidery machine, CNC (Tajima TEJT II-C NEO 1501) ID:144]]
File:150.jpg|[[Sewing/embroidery machine, computer controlled (Singer Futura CE-250) ID:150]]
File:156.jpg|[[Sewing machine, domestic (Janome HD-1000) ID:156]]
File:157.jpg|[[Serger, 4 thread (Singer 14U34B) ID:157]]
File:158.jpg|[[Serger, 4 thread, (Janome MyLock 634D) ID:158]]
File:148.jpg|[[Vinyl cutter, big (Graphtec FC8000-75) ID:148]]
File:NoImage.png|Vinyl cutter, small (Silhouette Cameo), on loan from Jamie Frost
File:154.jpg|[[Heat press, digital (Geo Knight & Co, Inc. K20S) ID:154]]
File:155.jpg|[[Heat press, auto release (Insta Graphic Systems 158) ID:155]]
File:166.jpg|[[Printer, 44" Large Format (HP DesignJet T1200), ID:166]]
</gallery>

==Measuring and inspection tools==

{{hatnote|See also: the [[#Electronics equipment|electronics equipment section on this page]] for electrical and electronic measurement and test equipment.}}

<gallery mode="nolines" widths="160" heights="160">
File:97.jpg|[[Inspection mirror, 18" gooseneck ID:97]]
File:98.jpg|[[Magnifier lamp, large, with lid ID:98]]
File:99.jpg|[[Magnifier lamp, large, without lid ID:99]]
File:100.jpg|[[Magnifier lamp, small, with lid ID:100]]
File:101.jpg|[[Measuring tapes ID:101]]
File:102.jpg|[[Rulers ID:102]]
File:103.jpg|[[Squares ID:103]]
File:104.jpg|[[Thermometer, infrared (H64) ID:104]]
</gallery>

==Miscellaneous tools==

<gallery mode="nolines" widths="160" heights="160">
File:111.jpg|link=111|[[Air compressor, 80-gallon (MAXair Premium) ID:111]]
File:112.jpg|link=112|[[Air compressor, silent ID:112]]
File:115.jpg|link=115|[[Engraver ID:115]]
File:116.jpg|link=116|[[Hand truck, red ID:116]]
File:117.jpg|link=117|[[Hot-wire foam cutter, handheld, 4.5"×5.5" (Woodland Scenics) ID:117]]
File:118.jpg|link=118|[[Hot-wire foam cutter, tabletop, 14"×12" ID:118]]
File:127.jpg|link=127|[[Oil can, blue ID:127]]
File:128.jpg|link=128|[[Painting tools ID:128]]
File:129.jpg|link=129|[[Pinball machine (Williams Road Kings) ID:129]]
File:130.jpg|link=130|[[Sandblasting cabinet, floor, blue (Powerfist) ID:130]]
File:131.jpg|link=131|[[Screwdriver magnetizer/demagnetizer (Wiha 40010) ID:131]]
File:132.jpg|link=132|[[Shop vacuum, orange ID:132]]
File:133.jpg|link=133|[[Staple gun (Arrow T-18) ID:133]]
File:122.jpg|link=122|[[Tile work surfaces ID:122]]
File:123.jpg|link=123|[[Tile work surfaces ID:123]]
File:134.jpg|link=134|[[Vacuum cart ID:134]]
File:136.jpg|link=136|[[Vacuum cleaner, portable ID:136]]
File:137.jpg|link=137|[[Vacuum pump (Edwards SpeediVac ED200) ID:137]]
File:161.jpg|link=161|[[Laminator (Scotch TL902) ID:161]]
File:166.jpg|link=166|[[Printer, 44" Large Format (HP DesignJet T1200), ID:166]]
File:169.png|link=169|[[ADS-B Base Station, FlightAware, ID:169]]
File:176.jpg|link=176|[[Vending machine, pop (Vendo 576) ID:176]]
File:177.jpg|link=177|[[Vending machine, snacks (Crane 173) ID:177]]
</gallery>

==Removed equipment==

In case they are brought back, or, so people who could have sworn we had a tool know it was removed.

<gallery style="background: darksalmon" mode="nolines">
File:6.jpg|[[Laser cutter, large (Rabbit Laser RL-80-1290) ID:6]]
File:3DP RapMan.jpg|[[3D printer (3D Systems RapMan)]]
File:3D printer, Come3D!.jpg|[[3D printer (Come3D!)]]
File:3DP Cupcake.jpg|[[3D printer (MakerBot Cupcake)]]
File:1.jpg|[[3D printer, FFF (IIIP) ID:1]]
File:3D printer, Nathan Ward's RepRap.jpg|[[3D printer, FFF (RepRap)]]
File:3D printer, Yin's Wanhao.jpg|[[3D printer, FFF (Wanhao Duplicator i3)]]
File:InVision si2.jpg|[[3D printer, MJM (3D Systems InVision si2)]]
File:NoImage.png|[[3D printer, SLA (mUVe 1) ID:5]]
File:Compressor Dewalt.jpg|[[Air compressor, 4-gallon (DeWalt)]]
File:Compressor Big.jpg|[[Air compressor, 17-gallon]]
File:110.jpg|[[Air compressor, 60-gallon (Campbell Hausfeld) ID:110]]
File:Reciprocating compressor.jpg|[[Air compressor, 80-gallon (Ingersoll Rand T30)]]
File:113.jpg|[[Air pump, foot-operated (Bell FootPumper) ID:113]]
File:Angle Grinder.jpg|[[Angle grinder (Kawasaki)]]
File:Anvil 75lb.jpg|[[Anvil]]
File:Bandsaw Horizontal.jpg|[[Bandsaw, metal, horizontal (Craftex B013N)]]
File:Bending Brake.jpg|[[Bending brake, 30" (Powerfist)]]
File:114.jpg|[[Bicycle tire jig ID:114]]
File:Buffer Benchtop.jpg|[[Buffer (Clarke 2H 5AB)]]
File:13.jpg|[[Counter (Fluke 1910A Multi-Counter) ID:13]]
File:Dewars.jpg|[[Dewars, 50-litre]]
File:Drill Dewalt.jpg|[[Drill, corded (DeWalt)]]
File:Pick N Place.jpg|[[Electronics assembly pick and place machine (Multitronics 2000LX)]]
File:Forge Propane 2.jpg|[[Forge, propane (Jim's)]]
File:43.jpg|[[Forge (Travis's) ID:43]]
File:NoImage.png|[[Forge, propane, pass-through ID:44]]
File:17.jpg|[[Function generator (Krohn–Hite 5100A) ID:17]]
File:Impact Driver.jpg|[[Impact driver (DeWalt)]]
File:7.jpg|[[Laser cutter, small ID:7]]
File:Lathe, Torrent T.72-42.jpg|[[Lathe, metal (Torrent T.72-42)]]
File:Lathe Mill.jpg|[[Lathe–mill combination (Craftex B2229)]]
File:Lathe Wood Mini.jpg|[[Lathe, wood (Haussmann)]]
File:MaxNC10.jpg|[[Milling machine, CNC, mini (MAXNC 10)]]
File:Audio mixing board.jpg|[[PA system (Dan Damron's)]]
File:22.jpg|[[Oscilloscope (Kikusui COS 5060) ID:22]]
File:50.jpg|[[Oxyacetylene torch, large ID:50]]
File:Parts washer, Powerfist 3.5 L.jpg|[[Parts washer, 3.5 L (Powerfist)]]
File:Plasma cutter.thumbnail.jpg|[[Plasma cutter, CNC (Kyle Paavola's)]]
File:Router Plunge Makita.jpg|[[Router, plunge (Makita 3612BR)]]
File:10.jpg|[[Press (Powerfist) ID:10]]
File:NoImage.png|[[Router table, wooden ID:81]]
File:87.jpg|[[87|Sander, random orbital (Skil 7492) ID:87]]
File:Chop Saw.jpg|[[Saw, compound mitre (Ryobi)]]
File:Chopsaw Metal.jpg|[[Saw, compound mitre, metal (Ryobi)]]
File:Reciprocating Saw.jpg|[[Saw, sabre (Mastercraft)]]
File:Skil Saw BD.jpg|[[Saw, handheld circular, 7 1/4" (Black & Decker)]]
File:Skil Saw Red.jpg|[[Saw, handheld circular (Skil)]]
File:90.jpg|[[Scroll saw (Mastercraft 55-6714-6) ID:90]]
File:119.jpg|[[Sewing machine, industrial (Relsew) ID:119]]
File:Shaper, metal.jpg|[[Shaper, 7"]]
File:Taps Grey.jpg|[[Tap & die set (Mastercraft)]]
File:OxyAce Mini.jpg|[[Torch, oxygen–acetylene, mini]]
File:32.jpg|[[UV photomasker (Dan's) ID:32]]
File:135.jpg|[[Vacuum pump ID:135]]
File:Vice Medium.jpg|[[Vise, medium (Irwin)]]
File:Welder MIG.jpg|[[Welder, MIG (Lincoln Weld-Pak 100)]]
File:55.jpg|[[Welder, stick, orange (Acklands 225 AC Sizzler) ID:55]]
File:109.jpg|[[Welder, Stick, AC/DC (Miller Thunderbolt XL) ID:109]]
File:74.jpg|[[Miter saw, compound, sliding (Hitachi) ID:74]]
File:142.jpg|[[Brake, shear, roller, 52" (Magnum) ID:142]]
File:146.jpg|[[Garment graphic printer, direct inject (Brother GT-361) ID:146]]
</gallery>

Laser Cutter, Thunder Nova 51 ID:178

2024-03-13T22:21:41Z

Pat.spencer: /* Documentation */ Corrected syntax for external URL link.

{{Equipment page
| toolname = Thunder Nova 51 Laser
| model = Nova 51
| serial = ?
| owner = ProtoSpace
| loanstatus = Owned
| arrived = Tuesday March 5, 2024
| location = ?
| status = Operational
| permission = ?
| certification = Laser I Course
| photo = Thunder-51-01.jpg
| caption =
| id =
}}

==Specs==
TBD

==Usage==

=== Using the Auto-Focus Feature ===

*[[/www.thunderlaser.com/video/how-to-use-auto-focus/|How to use laser autofocus - THUNDER LASER]]

===Setting Focus Height===
[[File:Thunder-Laser-Focus.jpeg]] 

===Suggested Material Settings===

*[[/www.thunderlaser.com/laser-cutter-settings-for-different-materials/|Laser Cutter Settings For Different Materials | Thunder Laser]] (note: ensure you select 130W from the top menu)

==Troubleshooting==
TBD

==Documentation==

*Official User Manual: [https://www.thunderlaser.ca/wp-content/uploads/down/Nova_Series_Unified_User's_Manual.pdf Nova_Series_Unified_User's_Manual.pdf (thunderlaser.ca)]

Tools we have

2024-03-13T22:13:52Z

Pat.spencer: Testing a GUI edit to see if it strips the link= tag.

Want to '''add a new tool'''? Follow [[Protospace Wiki:Adding new tools|this procedure]]!

We can always use new tools. Please feel free to [[contact information|contact Protospace]] to donate, arrange for pickup, or drop them off in person.

If you are interested in knowing what kind of tools we are looking for, we also have a member-managed [[Tools we want|tool wish list]], but your best bet on figuring out if we want something is simply asking on our [https://forum.protospace.ca forum].

We also have [[:Category:Tools|an alphabetically ordered and categorized tool catalog]].

__TOC__

==Rapid prototyping tools==

{{hatnote|Comparisons: [[our 3D printers]], [[our laser cutters]]}}

<gallery mode="nolines" widths="160" heights="160">
File:2.jpg|link=2|[[3D printer, FFF (ORD Bot Hadron) ID:2]]
File:3.jpg|link=3|[[3D printer, FFF (PrusaMD) ID:3]]
File:159.jpg|link=159|[[3D printer, resin (Anycubic Photon 5.5) ID:159]]
File:170.jpg|link=170|[[3D_printer, resin (ELEGOO Saturn) ID:170]]
File:160.jpg|link=160|[[Curing station (Anycubic Wash and Cure Machine) ID:160]]
File:Thunder-51-01.jpg|link=178|[[Thunder Nova 51 Laser ID:178]]
File:107.jpg|link=107|[[Laser cutter (Trotec Speedy 300) ID:107]]
File:141.jpg|link=141|[[CNC router, mini (TD 3040) ID:141]]
File:Precix-CNC-001.jpg|link=153|[[CNC router, wood (Precix) ID:153]]
File:LongMill-on-Shelf-01.png|link=143|[[CNC router, benchtop (SIENCI LongMill) ID:143]]
</gallery>

==Automotive tools==

<gallery mode="nolines" widths="160" heights="160">
File:8.jpg|[[Floor jack, blue ID:8]]
File:9.jpg|[[Trolley jack and axle stand kit (Certified) ID:9]]
File:11.jpg|[[Socket set ID:11]]
File:162.jpeg|link=162|[[Bike stand (Feedback Sport) ID:162]]
</gallery>

==Chemistry==

<gallery mode="nolines" widths="160" heights="160">
File:12.jpg|[[Oxygen concentrator (OGSI OG-15) ID:12]]
</gallery>

==Electronics equipment==

<gallery mode="nolines" widths="160" heights="160">
File:14.jpg|[[Counter (Lafayette 54517) ID:14]]
File:15.jpg|[[Decade box, capacitance (Servomex Controls Decade Capacitor Type B) ID:15]]
File:16.jpg|[[Function generator (John's) ID:16]]
File:18.jpg|[[Heat gun (Powerfist) ID:18]]
File:19.jpg|[[Logic analyzer (HP 1631D) ID:19]]
File:20.jpg|[[Multimeter, digital (Pro.Point 8344665) ID:20]]
File:167.jpg|[[Oscilloscope (Siglent SDS1104X-E) ID:167]]
File:23.jpg|[[Oscilloscope (Tektronix 2225) ID:23]]
File:24.jpg|[[Oscilloscope (Tektronix 2465A) ID:24]]
File:25.jpg|[[Oscilloscope, PC (Syscomp DSO-101) ID:25]]
File:26.jpg|[[Power supply, bench (GQ Electronics GQ-A305D) ID:26]]
File:27.jpg|[[Power supply, bench, 500 V (Heathkit PS-3) ID:27]]
File:28.jpg|[[Power supply, bench, 2-channel (TENMA 72-7245) ID:28]]
File:30.jpg|[[Hot-air rework station (GQ Electronics 5200) ID:30]]
File:31.jpg|[[Solder fume extractor (Metcal) ID:31]]
File:33.jpg|[[Waveform generator (Syscomp WGM-101) ID:33]]
File:34.jpg|[[Waveform monitor (Tektronix 1730) ID:34]]
File:145-Welcome-Monitor.png|[[Welcome Room Monitor ID:145]]
</gallery>

==Metalworking tools==

<gallery mode="nolines" widths="160" heights="160">
File:35.jpg|[[Angle grinder (DeWalt) ID:35]]
File:37.jpg|[[Bandsaw, metal, horizontal ID:37]]
File:165.jpg|[[Bandsaw, metal, horizontal (Westward UE-712) ID:165]]
File:39.jpg|[[Bench grinder (Powerfist) ID:39]]
File:40.jpg|[[Bench grinder (Trademaster PR14210) ID:40]]
File:151.jpg|[[Brake, box and pan, 24" (Magnum) ID:151]]
File:42.jpg|[[Drill press (Mastercraft) ID:42]]
File:45.jpg|[[Foundry, propane ID:45]]
File:121.jpg|[[Hydraulic press, 50-ton, electric ID:121]]
File:46.jpg|[[Lathe, metal (Challenger 1660G) ID:46]]
File:47.jpg|[[Lathe, miniature (Taig Microlathe II) ID:47]]
File:53.jpg|[[Metal shear (Magnum) ID:53]]
File:48.jpg|[[Milling machine (ACRA AM4V) ID:48]]
File:49.jpg|[[Milling machine, CNC (Tormach PCNC 1100) ID:49]]
File:173.png|[[Plasma Cutter (Hypertherm, Powermax85) ID:173]]
File:51.jpg|[[Plasma cutter, huge (Powercut 1500) ID:51]]
File:52.jpg|[[Plasma cutter, small (Miller Spectrum 375) ID:52]]
File:54.jpg|[[Vise, giant ID:54]]
File:56.jpg|[[Welding magnets ID:56]]
File:Metalworking pattern maker's vise.jpg|[[Metalworking pattern maker's vise]]
File:Metal drill press.jpg|[[HD gear driven drill press/mill]]
File:163.jpg|[[Pipe bender (Power Fist 12 ton hydraulic) ID:163]]
</gallery>

==Woodworking and plasticworking tools==

<gallery mode="nolines" widths="160" heights="160">
File:171-Wood-Lathe-Jet.jpg|[[Wood Lathe, JET JWL-1236 ID:171]]
File:57.jpg|[[Bandsaw, green ID:57]]
File:59.jpg|[[Clamps ID:59]]
File:61.jpg|[[Drill, hand, corded, black (Jobmate) ID:61]]
File:62.jpg|[[Drill, hand, corded, dark blue (Ryobi) ID:62]]
File:67.jpg|[[Drill, hand, cordless (DeWalt) ID:67]]
File:68.jpg|[[Drill, hand, corded (Makita DP3720) ID:68]]
File:69.jpg|[[Drill press, 8" (Jobmate) ID:69]]
File:70.jpg|[[Jigsaw, corded (Black & Decker) ID:70]]
File:72.jpg|[[Jigsaw (Skil) ID:72]]
File:75.jpg|[[Nailer, pneumatic, 2-in-1 ID:75]]
File:108.jpg|[[Planer (Jet JPM-13CS) ID:108]]
File:76.jpg|[[Plate joiner (Porter Cable 557) ID:76]]
File:140.jpg|[[Pocket hole jig (Kreg K3) ID:140]]
File:78.jpg|[[Rotary tool, corded (Mastercraft) ID:78]]
File:79.jpg|[[Rotary tool, cordless (Dremel) ID:79]]
File:124.jpg|[[Router table (Jeff's) ID:124]]
File:83.jpg|[[Sander, belt (Makita 9402) ID:83]]
File:84.jpg|[[Sander, belt/disc (Dremel 730) ID:84]]
File:85.jpg|[[Sander, detail (Ryobi) ID:85]]
File:106.jpg|[[Sander, drum (General International 15-250 M1) ID:106]]
File:138.jpg|[[Sander, random orbital (Ridgid R2601) ID:138]]
File:139.jpg|[[Sander, random orbital (Ridgid R2601) ID:139]]
File:88.jpg|[[Sander, straight-line/orbital (Black & Decker Deluxe) ID:88]]
File:89.jpg|[[Scroll saw (Dremel) ID:89]]
File:91.jpg|[[Table saw (Craftex CX201) ID:91]]
File:92.jpg|[[Thickness planer (Ryobi AP1301) ID:92]]
File:93.jpg|[[Vacuum, sawdust (Craftex CX404) ID:93]]
File:NoImage.png|[[Vise, wood ID:94]]
File:95.jpg|[[Vise, wood (Travis's) ID:95]]
File:Makita cordless jigsaw.jpg|cordless Makita jig saw
File:Ridgid random orbital sander (1 of 2, unknown which one).jpg|Ridgid random orbital sander (2 of these)
File:6" jointer.jpg|6" jointer
File:DeWalt sliding compound miter saw.jpg|12" Dewalt sliding compound miter saw
File:Wood tools sharpening station.jpg|A sharpening station with a plethora of tool sharpening grinders-jigs-etc
File:149.jpg|[[Drill press, floor mounted, variable speed ID:149]]
File:164.jpg|[[Handheld metal detector ID:164]]
File:168.jpg|[[Planer, 16" Auto Planer]]
File:172.jpg|[[Table saw (SawStop) ID:172]]
File:174.jpg|[[drying rack (coyle-made) ID:174]]
</gallery>

==Textile, Vinyl, and Media tools==

<gallery mode="nolines" widths="160" heights="160">
File:120.jpg|[[Sewing machine, domestic (Singer 1802) ID:120]]
File:Singer 211G155.jpg|[[Sewing machine, industrial (Singer 211G155) ID:147]]
File:144.jpg|[[Embroidery machine, CNC (Tajima TEJT II-C NEO 1501) ID:144]]
File:150.jpg|[[Sewing/embroidery machine, computer controlled (Singer Futura CE-250) ID:150]]
File:156.jpg|[[Sewing machine, domestic (Janome HD-1000) ID:156]]
File:157.jpg|[[Serger, 4 thread (Singer 14U34B) ID:157]]
File:158.jpg|[[Serger, 4 thread, (Janome MyLock 634D) ID:158]]
File:148.jpg|[[Vinyl cutter, big (Graphtec FC8000-75) ID:148]]
File:NoImage.png|Vinyl cutter, small (Silhouette Cameo), on loan from Jamie Frost
File:154.jpg|[[Heat press, digital (Geo Knight & Co, Inc. K20S) ID:154]]
File:155.jpg|[[Heat press, auto release (Insta Graphic Systems 158) ID:155]]
File:166.jpg|[[Printer, 44" Large Format (HP DesignJet T1200), ID:166]]
</gallery>

==Measuring and inspection tools==

{{hatnote|See also: the [[#Electronics equipment|electronics equipment section on this page]] for electrical and electronic measurement and test equipment.}}

<gallery mode="nolines" widths="160" heights="160">
File:97.jpg|[[Inspection mirror, 18" gooseneck ID:97]]
File:98.jpg|[[Magnifier lamp, large, with lid ID:98]]
File:99.jpg|[[Magnifier lamp, large, without lid ID:99]]
File:100.jpg|[[Magnifier lamp, small, with lid ID:100]]
File:101.jpg|[[Measuring tapes ID:101]]
File:102.jpg|[[Rulers ID:102]]
File:103.jpg|[[Squares ID:103]]
File:104.jpg|[[Thermometer, infrared (H64) ID:104]]
</gallery>

==Miscellaneous tools==

<gallery mode="nolines" widths="160" heights="160">
File:111.jpg|[[Air compressor, 80-gallon (MAXair Premium) ID:111]]
File:112.jpg|[[Air compressor, silent ID:112]]
File:115.jpg|[[Engraver ID:115]]
File:116.jpg|[[Hand truck, red ID:116]]
File:117.jpg|[[Hot-wire foam cutter, handheld, 4.5"×5.5" (Woodland Scenics) ID:117]]
File:118.jpg|[[Hot-wire foam cutter, tabletop, 14"×12" ID:118]]
File:127.jpg|[[Oil can, blue ID:127]]
File:128.jpg|[[Painting tools ID:128]]
File:129.jpg|[[Pinball machine (Williams Road Kings) ID:129]]
File:130.jpg|[[Sandblasting cabinet, floor, blue (Powerfist) ID:130]]
File:131.jpg|[[Screwdriver magnetizer/demagnetizer (Wiha 40010) ID:131]]
File:132.jpg|[[Shop vacuum, orange ID:132]]
File:133.jpg|[[Staple gun (Arrow T-18) ID:133]]
File:122.jpg|[[Tile work surfaces ID:122]]
File:123.jpg|[[Tile work surfaces ID:123]]
File:134.jpg|[[Vacuum cart ID:134]]
File:136.jpg|[[Vacuum cleaner, portable ID:136]]
File:137.jpg|[[Vacuum pump (Edwards SpeediVac ED200) ID:137]]
File:161.jpg|[[Laminator (Scotch TL902) ID:161]]
File:166.jpg|[[Printer, 44" Large Format (HP DesignJet T1200), ID:166]]
File:169.png|[[ADS-B Base Station, FlightAware, ID:169]]
File:176.jpg|[[Vending machine, pop (Vendo 576) ID:176]]
File:177.jpg|[[Vending machine, snacks (Crane 173) ID:177]]
</gallery>

==Removed equipment==

In case they are brought back, or, so people who could have sworn we had a tool know it was removed.

<gallery style="background: darksalmon" mode="nolines">
File:6.jpg|[[Laser cutter, large (Rabbit Laser RL-80-1290) ID:6]]
File:3DP RapMan.jpg|[[3D printer (3D Systems RapMan)]]
File:3D printer, Come3D!.jpg|[[3D printer (Come3D!)]]
File:3DP Cupcake.jpg|[[3D printer (MakerBot Cupcake)]]
File:1.jpg|[[3D printer, FFF (IIIP) ID:1]]
File:3D printer, Nathan Ward's RepRap.jpg|[[3D printer, FFF (RepRap)]]
File:3D printer, Yin's Wanhao.jpg|[[3D printer, FFF (Wanhao Duplicator i3)]]
File:InVision si2.jpg|[[3D printer, MJM (3D Systems InVision si2)]]
File:NoImage.png|[[3D printer, SLA (mUVe 1) ID:5]]
File:Compressor Dewalt.jpg|[[Air compressor, 4-gallon (DeWalt)]]
File:Compressor Big.jpg|[[Air compressor, 17-gallon]]
File:110.jpg|[[Air compressor, 60-gallon (Campbell Hausfeld) ID:110]]
File:Reciprocating compressor.jpg|[[Air compressor, 80-gallon (Ingersoll Rand T30)]]
File:113.jpg|[[Air pump, foot-operated (Bell FootPumper) ID:113]]
File:Angle Grinder.jpg|[[Angle grinder (Kawasaki)]]
File:Anvil 75lb.jpg|[[Anvil]]
File:Bandsaw Horizontal.jpg|[[Bandsaw, metal, horizontal (Craftex B013N)]]
File:Bending Brake.jpg|[[Bending brake, 30" (Powerfist)]]
File:114.jpg|[[Bicycle tire jig ID:114]]
File:Buffer Benchtop.jpg|[[Buffer (Clarke 2H 5AB)]]
File:13.jpg|[[Counter (Fluke 1910A Multi-Counter) ID:13]]
File:Dewars.jpg|[[Dewars, 50-litre]]
File:Drill Dewalt.jpg|[[Drill, corded (DeWalt)]]
File:Pick N Place.jpg|[[Electronics assembly pick and place machine (Multitronics 2000LX)]]
File:Forge Propane 2.jpg|[[Forge, propane (Jim's)]]
File:43.jpg|[[Forge (Travis's) ID:43]]
File:NoImage.png|[[Forge, propane, pass-through ID:44]]
File:17.jpg|[[Function generator (Krohn–Hite 5100A) ID:17]]
File:Impact Driver.jpg|[[Impact driver (DeWalt)]]
File:7.jpg|[[Laser cutter, small ID:7]]
File:Lathe, Torrent T.72-42.jpg|[[Lathe, metal (Torrent T.72-42)]]
File:Lathe Mill.jpg|[[Lathe–mill combination (Craftex B2229)]]
File:Lathe Wood Mini.jpg|[[Lathe, wood (Haussmann)]]
File:MaxNC10.jpg|[[Milling machine, CNC, mini (MAXNC 10)]]
File:Audio mixing board.jpg|[[PA system (Dan Damron's)]]
File:22.jpg|[[Oscilloscope (Kikusui COS 5060) ID:22]]
File:50.jpg|[[Oxyacetylene torch, large ID:50]]
File:Parts washer, Powerfist 3.5 L.jpg|[[Parts washer, 3.5 L (Powerfist)]]
File:Plasma cutter.thumbnail.jpg|[[Plasma cutter, CNC (Kyle Paavola's)]]
File:Router Plunge Makita.jpg|[[Router, plunge (Makita 3612BR)]]
File:10.jpg|[[Press (Powerfist) ID:10]]
File:NoImage.png|[[Router table, wooden ID:81]]
File:87.jpg|[[87|Sander, random orbital (Skil 7492) ID:87]]
File:Chop Saw.jpg|[[Saw, compound mitre (Ryobi)]]
File:Chopsaw Metal.jpg|[[Saw, compound mitre, metal (Ryobi)]]
File:Reciprocating Saw.jpg|[[Saw, sabre (Mastercraft)]]
File:Skil Saw BD.jpg|[[Saw, handheld circular, 7 1/4" (Black & Decker)]]
File:Skil Saw Red.jpg|[[Saw, handheld circular (Skil)]]
File:90.jpg|[[Scroll saw (Mastercraft 55-6714-6) ID:90]]
File:119.jpg|[[Sewing machine, industrial (Relsew) ID:119]]
File:Shaper, metal.jpg|[[Shaper, 7"]]
File:Taps Grey.jpg|[[Tap & die set (Mastercraft)]]
File:OxyAce Mini.jpg|[[Torch, oxygen–acetylene, mini]]
File:32.jpg|[[UV photomasker (Dan's) ID:32]]
File:135.jpg|[[Vacuum pump ID:135]]
File:Vice Medium.jpg|[[Vise, medium (Irwin)]]
File:Welder MIG.jpg|[[Welder, MIG (Lincoln Weld-Pak 100)]]
File:55.jpg|[[Welder, stick, orange (Acklands 225 AC Sizzler) ID:55]]
File:109.jpg|[[Welder, Stick, AC/DC (Miller Thunderbolt XL) ID:109]]
File:74.jpg|[[Miter saw, compound, sliding (Hitachi) ID:74]]
File:142.jpg|[[Brake, shear, roller, 52" (Magnum) ID:142]]
File:146.jpg|[[Garment graphic printer, direct inject (Brother GT-361) ID:146]]
</gallery>

Tools we have

2024-03-13T22:10:49Z

Pat.spencer: /* Automotive tools */

Want to '''add a new tool'''? Follow [[Protospace Wiki:Adding new tools|this procedure]]!

We can always use new tools. Please feel free to [[contact information|contact Protospace]] to donate, arrange for pickup, or drop them off in person.

If you are interested in knowing what kind of tools we are looking for, we also have a member-managed [[Tools we want|tool wishlist]], but your best bet on figuring out if we want something is simply asking on our [https://forum.protospace.ca forum].

We also have [[:Category:Tools|an alphabetically ordered and categorized tool catalog]].

__TOC__

==Rapid prototyping tools==

{{hatnote|Comparisons: [[our 3D printers]], [[our laser cutters]]}}

<gallery mode="nolines" widths="160" heights="160">
File:2.jpg|link=2|[[3D printer, FFF (ORD Bot Hadron) ID:2]]
File:3.jpg|link=3|[[3D printer, FFF (PrusaMD) ID:3]]
File:159.jpg|link=159|[[3D printer, resin (Anycubic Photon 5.5) ID:159]]
File:170.jpg|link=170|[[3D_printer, resin (ELEGOO Saturn) ID:170]]
File:160.jpg|link=160|[[Curing station (Anycubic Wash and Cure Machine) ID:160]]
File:Thunder-51-01.jpg|link=178|[[Thunder Nova 51 Laser ID:178]]
File:107.jpg|link=107|[[Laser cutter (Trotec Speedy 300) ID:107]]
File:141.jpg|link=141|[[CNC router, mini (TD 3040) ID:141]]
File:Precix-CNC-001.jpg|link=153|[[CNC router, wood (Precix) ID:153]]
File:LongMill-on-Shelf-01.png|link=143|[[CNC router, benchtop (SIENCI LongMill) ID:143]]
</gallery>

==Automotive tools==

<gallery mode="nolines" widths="160" heights="160">
File:8.jpg|[[Floor jack, blue ID:8]]
File:9.jpg|[[Trolley jack and axle stand kit (Certified) ID:9]]
File:11.jpg|[[Socket set ID:11]]
File:162.jpeg|link=162|[[Bike stand (Feedback Sport) ID:162]]
</gallery>

==Chemistry==

<gallery mode="nolines" widths="160" heights="160">
File:12.jpg|[[Oxygen concentrator (OGSI OG-15) ID:12]]
</gallery>

==Electronics equipment==

<gallery mode="nolines" widths="160" heights="160">
File:14.jpg|[[Counter (Lafayette 54517) ID:14]]
File:15.jpg|[[Decade box, capacitance (Servomex Controls Decade Capacitor Type B) ID:15]]
File:16.jpg|[[Function generator (John's) ID:16]]
File:18.jpg|[[Heat gun (Powerfist) ID:18]]
File:19.jpg|[[Logic analyzer (HP 1631D) ID:19]]
File:20.jpg|[[Multimeter, digital (Pro.Point 8344665) ID:20]]
File:167.jpg|[[Oscilloscope (Siglent SDS1104X-E) ID:167]]
File:23.jpg|[[Oscilloscope (Tektronix 2225) ID:23]]
File:24.jpg|[[Oscilloscope (Tektronix 2465A) ID:24]]
File:25.jpg|[[Oscilloscope, PC (Syscomp DSO-101) ID:25]]
File:26.jpg|[[Power supply, bench (GQ Electronics GQ-A305D) ID:26]]
File:27.jpg|[[Power supply, bench, 500 V (Heathkit PS-3) ID:27]]
File:28.jpg|[[Power supply, bench, 2-channel (TENMA 72-7245) ID:28]]
File:30.jpg|[[Hot-air rework station (GQ Electronics 5200) ID:30]]
File:31.jpg|[[Solder fume extractor (Metcal) ID:31]]
File:33.jpg|[[Waveform generator (Syscomp WGM-101) ID:33]]
File:34.jpg|[[Waveform monitor (Tektronix 1730) ID:34]]
File:145-Welcome-Monitor.png|[[Welcome Room Monitor ID:145]]
</gallery>

==Metalworking tools==

<gallery mode="nolines" widths="160" heights="160">
File:35.jpg|[[Angle grinder (DeWalt) ID:35]]
File:37.jpg|[[Bandsaw, metal, horizontal ID:37]]
File:165.jpg|[[Bandsaw, metal, horizontal (Westward UE-712) ID:165]]
File:39.jpg|[[Bench grinder (Powerfist) ID:39]]
File:40.jpg|[[Bench grinder (Trademaster PR14210) ID:40]]
File:151.jpg|[[Brake, box and pan, 24" (Magnum) ID:151]]
File:42.jpg|[[Drill press (Mastercraft) ID:42]]
File:45.jpg|[[Foundry, propane ID:45]]
File:121.jpg|[[Hydraulic press, 50-ton, electric ID:121]]
File:46.jpg|[[Lathe, metal (Challenger 1660G) ID:46]]
File:47.jpg|[[Lathe, miniature (Taig Microlathe II) ID:47]]
File:53.jpg|[[Metal shear (Magnum) ID:53]]
File:48.jpg|[[Milling machine (ACRA AM4V) ID:48]]
File:49.jpg|[[Milling machine, CNC (Tormach PCNC 1100) ID:49]]
File:173.png|[[Plasma Cutter (Hypertherm, Powermax85) ID:173]]
File:51.jpg|[[Plasma cutter, huge (Powercut 1500) ID:51]]
File:52.jpg|[[Plasma cutter, small (Miller Spectrum 375) ID:52]]
File:54.jpg|[[Vise, giant ID:54]]
File:56.jpg|[[Welding magnets ID:56]]
File:Metalworking pattern maker's vise.jpg|[[Metalworking pattern maker's vise]]
File:Metal drill press.jpg|[[HD gear driven drill press/mill]]
File:163.jpg|[[Pipe bender (Power Fist 12 ton hydraulic) ID:163]]
</gallery>

==Woodworking and plasticworking tools==

<gallery mode="nolines" widths="160" heights="160">
File:171-Wood-Lathe-Jet.jpg|[[Wood Lathe, JET JWL-1236 ID:171]]
File:57.jpg|[[Bandsaw, green ID:57]]
File:59.jpg|[[Clamps ID:59]]
File:61.jpg|[[Drill, hand, corded, black (Jobmate) ID:61]]
File:62.jpg|[[Drill, hand, corded, dark blue (Ryobi) ID:62]]
File:67.jpg|[[Drill, hand, cordless (DeWalt) ID:67]]
File:68.jpg|[[Drill, hand, corded (Makita DP3720) ID:68]]
File:69.jpg|[[Drill press, 8" (Jobmate) ID:69]]
File:70.jpg|[[Jigsaw, corded (Black & Decker) ID:70]]
File:72.jpg|[[Jigsaw (Skil) ID:72]]
File:75.jpg|[[Nailer, pneumatic, 2-in-1 ID:75]]
File:108.jpg|[[Planer (Jet JPM-13CS) ID:108]]
File:76.jpg|[[Plate joiner (Porter Cable 557) ID:76]]
File:140.jpg|[[Pocket hole jig (Kreg K3) ID:140]]
File:78.jpg|[[Rotary tool, corded (Mastercraft) ID:78]]
File:79.jpg|[[Rotary tool, cordless (Dremel) ID:79]]
File:124.jpg|[[Router table (Jeff's) ID:124]]
File:83.jpg|[[Sander, belt (Makita 9402) ID:83]]
File:84.jpg|[[Sander, belt/disc (Dremel 730) ID:84]]
File:85.jpg|[[Sander, detail (Ryobi) ID:85]]
File:106.jpg|[[Sander, drum (General International 15-250 M1) ID:106]]
File:138.jpg|[[Sander, random orbital (Ridgid R2601) ID:138]]
File:139.jpg|[[Sander, random orbital (Ridgid R2601) ID:139]]
File:88.jpg|[[Sander, straight-line/orbital (Black & Decker Deluxe) ID:88]]
File:89.jpg|[[Scroll saw (Dremel) ID:89]]
File:91.jpg|[[Table saw (Craftex CX201) ID:91]]
File:92.jpg|[[Thickness planer (Ryobi AP1301) ID:92]]
File:93.jpg|[[Vacuum, sawdust (Craftex CX404) ID:93]]
File:NoImage.png|[[Vise, wood ID:94]]
File:95.jpg|[[Vise, wood (Travis's) ID:95]]
File:Makita cordless jigsaw.jpg|cordless Makita jig saw
File:Ridgid random orbital sander (1 of 2, unknown which one).jpg|Ridgid random orbital sander (2 of these)
File:6" jointer.jpg|6" jointer
File:DeWalt sliding compound miter saw.jpg|12" Dewalt sliding compound miter saw
File:Wood tools sharpening station.jpg|A sharpening station with a plethora of tool sharpening grinders-jigs-etc
File:149.jpg|[[Drill press, floor mounted, variable speed ID:149]]
File:164.jpg|[[Handheld metal detector ID:164]]
File:168.jpg|[[Planer, 16" Auto Planer]]
File:172.jpg|[[Table saw (SawStop) ID:172]]
File:174.jpg|[[drying rack (coyle-made) ID:174]]
</gallery>

==Textile, Vinyl, and Media tools==

<gallery mode="nolines" widths="160" heights="160">
File:120.jpg|[[Sewing machine, domestic (Singer 1802) ID:120]]
File:Singer 211G155.jpg|[[Sewing machine, industrial (Singer 211G155) ID:147]]
File:144.jpg|[[Embroidery machine, CNC (Tajima TEJT II-C NEO 1501) ID:144]]
File:150.jpg|[[Sewing/embroidery machine, computer controlled (Singer Futura CE-250) ID:150]]
File:156.jpg|[[Sewing machine, domestic (Janome HD-1000) ID:156]]
File:157.jpg|[[Serger, 4 thread (Singer 14U34B) ID:157]]
File:158.jpg|[[Serger, 4 thread, (Janome MyLock 634D) ID:158]]
File:148.jpg|[[Vinyl cutter, big (Graphtec FC8000-75) ID:148]]
File:NoImage.png|Vinyl cutter, small (Silhouette Cameo), on loan from Jamie Frost
File:154.jpg|[[Heat press, digital (Geo Knight & Co, Inc. K20S) ID:154]]
File:155.jpg|[[Heat press, auto release (Insta Graphic Systems 158) ID:155]]
File:166.jpg|[[Printer, 44" Large Format (HP DesignJet T1200), ID:166]]
</gallery>

==Measuring and inspection tools==

{{hatnote|See also: the [[#Electronics equipment|electronics equipment section on this page]] for electrical and electronic measurement and test equipment.}}

<gallery mode="nolines" widths="160" heights="160">
File:97.jpg|[[Inspection mirror, 18" gooseneck ID:97]]
File:98.jpg|[[Magnifier lamp, large, with lid ID:98]]
File:99.jpg|[[Magnifier lamp, large, without lid ID:99]]
File:100.jpg|[[Magnifier lamp, small, with lid ID:100]]
File:101.jpg|[[Measuring tapes ID:101]]
File:102.jpg|[[Rulers ID:102]]
File:103.jpg|[[Squares ID:103]]
File:104.jpg|[[Thermometer, infrared (H64) ID:104]]
</gallery>

==Miscellaneous tools==

<gallery mode="nolines" widths="160" heights="160">
File:111.jpg|[[Air compressor, 80-gallon (MAXair Premium) ID:111]]
File:112.jpg|[[Air compressor, silent ID:112]]
File:115.jpg|[[Engraver ID:115]]
File:116.jpg|[[Hand truck, red ID:116]]
File:117.jpg|[[Hot-wire foam cutter, handheld, 4.5"×5.5" (Woodland Scenics) ID:117]]
File:118.jpg|[[Hot-wire foam cutter, tabletop, 14"×12" ID:118]]
File:127.jpg|[[Oil can, blue ID:127]]
File:128.jpg|[[Painting tools ID:128]]
File:129.jpg|[[Pinball machine (Williams Road Kings) ID:129]]
File:130.jpg|[[Sandblasting cabinet, floor, blue (Powerfist) ID:130]]
File:131.jpg|[[Screwdriver magnetizer/demagnetizer (Wiha 40010) ID:131]]
File:132.jpg|[[Shop vacuum, orange ID:132]]
File:133.jpg|[[Staple gun (Arrow T-18) ID:133]]
File:122.jpg|[[Tile work surfaces ID:122]]
File:123.jpg|[[Tile work surfaces ID:123]]
File:134.jpg|[[Vacuum cart ID:134]]
File:136.jpg|[[Vacuum cleaner, portable ID:136]]
File:137.jpg|[[Vacuum pump (Edwards SpeediVac ED200) ID:137]]
File:161.jpg|[[Laminator (Scotch TL902) ID:161]]
File:166.jpg|[[Printer, 44" Large Format (HP DesignJet T1200), ID:166]]
File:169.png|[[ADS-B Base Station, FlightAware, ID:169]]
File:176.jpg|[[Vending machine, pop (Vendo 576) ID:176]]
File:177.jpg|[[Vending machine, snacks (Crane 173) ID:177]]
</gallery>

==Removed equipment==

In case they are brought back, or, so people who could have sworn we had a tool know it was removed.

<gallery style="background: darksalmon" mode="nolines">
File:6.jpg|[[Laser cutter, large (Rabbit Laser RL-80-1290) ID:6]]
File:3DP RapMan.jpg|[[3D printer (3D Systems RapMan)]]
File:3D printer, Come3D!.jpg|[[3D printer (Come3D!)]]
File:3DP Cupcake.jpg|[[3D printer (MakerBot Cupcake)]]
File:1.jpg|[[3D printer, FFF (IIIP) ID:1]]
File:3D printer, Nathan Ward's RepRap.jpg|[[3D printer, FFF (RepRap)]]
File:3D printer, Yin's Wanhao.jpg|[[3D printer, FFF (Wanhao Duplicator i3)]]
File:InVision si2.jpg|[[3D printer, MJM (3D Systems InVision si2)]]
File:NoImage.png|[[3D printer, SLA (mUVe 1) ID:5]]
File:Compressor Dewalt.jpg|[[Air compressor, 4-gallon (DeWalt)]]
File:Compressor Big.jpg|[[Air compressor, 17-gallon]]
File:110.jpg|[[Air compressor, 60-gallon (Campbell Hausfeld) ID:110]]
File:Reciprocating compressor.jpg|[[Air compressor, 80-gallon (Ingersoll Rand T30)]]
File:113.jpg|[[Air pump, foot-operated (Bell FootPumper) ID:113]]
File:Angle Grinder.jpg|[[Angle grinder (Kawasaki)]]
File:Anvil 75lb.jpg|[[Anvil]]
File:Bandsaw Horizontal.jpg|[[Bandsaw, metal, horizontal (Craftex B013N)]]
File:Bending Brake.jpg|[[Bending brake, 30" (Powerfist)]]
File:114.jpg|[[Bicycle tire jig ID:114]]
File:Buffer Benchtop.jpg|[[Buffer (Clarke 2H 5AB)]]
File:13.jpg|[[Counter (Fluke 1910A Multi-Counter) ID:13]]
File:Dewars.jpg|[[Dewars, 50-litre]]
File:Drill Dewalt.jpg|[[Drill, corded (DeWalt)]]
File:Pick N Place.jpg|[[Electronics assembly pick and place machine (Multitronics 2000LX)]]
File:Forge Propane 2.jpg|[[Forge, propane (Jim's)]]
File:43.jpg|[[Forge (Travis's) ID:43]]
File:NoImage.png|[[Forge, propane, pass-through ID:44]]
File:17.jpg|[[Function generator (Krohn–Hite 5100A) ID:17]]
File:Impact Driver.jpg|[[Impact driver (DeWalt)]]
File:7.jpg|[[Laser cutter, small ID:7]]
File:Lathe, Torrent T.72-42.jpg|[[Lathe, metal (Torrent T.72-42)]]
File:Lathe Mill.jpg|[[Lathe–mill combination (Craftex B2229)]]
File:Lathe Wood Mini.jpg|[[Lathe, wood (Haussmann)]]
File:MaxNC10.jpg|[[Milling machine, CNC, mini (MAXNC 10)]]
File:Audio mixing board.jpg|[[PA system (Dan Damron's)]]
File:22.jpg|[[Oscilloscope (Kikusui COS 5060) ID:22]]
File:50.jpg|[[Oxyacetylene torch, large ID:50]]
File:Parts washer, Powerfist 3.5 L.jpg|[[Parts washer, 3.5 L (Powerfist)]]
File:Plasma cutter.thumbnail.jpg|[[Plasma cutter, CNC (Kyle Paavola's)]]
File:Router Plunge Makita.jpg|[[Router, plunge (Makita 3612BR)]]
File:10.jpg|[[Press (Powerfist) ID:10]]
File:NoImage.png|[[Router table, wooden ID:81]]
File:87.jpg|[[87|Sander, random orbital (Skil 7492) ID:87]]
File:Chop Saw.jpg|[[Saw, compound mitre (Ryobi)]]
File:Chopsaw Metal.jpg|[[Saw, compound mitre, metal (Ryobi)]]
File:Reciprocating Saw.jpg|[[Saw, sabre (Mastercraft)]]
File:Skil Saw BD.jpg|[[Saw, handheld circular, 7 1/4" (Black & Decker)]]
File:Skil Saw Red.jpg|[[Saw, handheld circular (Skil)]]
File:90.jpg|[[Scroll saw (Mastercraft 55-6714-6) ID:90]]
File:119.jpg|[[Sewing machine, industrial (Relsew) ID:119]]
File:Shaper, metal.jpg|[[Shaper, 7"]]
File:Taps Grey.jpg|[[Tap & die set (Mastercraft)]]
File:OxyAce Mini.jpg|[[Torch, oxygen–acetylene, mini]]
File:32.jpg|[[UV photomasker (Dan's) ID:32]]
File:135.jpg|[[Vacuum pump ID:135]]
File:Vice Medium.jpg|[[Vise, medium (Irwin)]]
File:Welder MIG.jpg|[[Welder, MIG (Lincoln Weld-Pak 100)]]
File:55.jpg|[[Welder, stick, orange (Acklands 225 AC Sizzler) ID:55]]
File:109.jpg|[[Welder, Stick, AC/DC (Miller Thunderbolt XL) ID:109]]
File:74.jpg|[[Miter saw, compound, sliding (Hitachi) ID:74]]
File:142.jpg|[[Brake, shear, roller, 52" (Magnum) ID:142]]
File:146.jpg|[[Garment graphic printer, direct inject (Brother GT-361) ID:146]]
</gallery>

Tools we have

2024-03-11T02:42:48Z

Pat.spencer: /* Rapid prototyping tools */

Want to '''add a new tool'''? Follow [[Protospace Wiki:Adding new tools|this procedure]]!

We can always use new tools. Please feel free to [[contact information|contact Protospace]] to donate, arrange for pickup, or drop them off in person.

If you are interested in knowing what kind of tools we are looking for, we also have a member-managed [[Tools we want|tool wishlist]], but your best bet on figuring out if we want something is simply asking on our [https://forum.protospace.ca forum].

We also have [[:Category:Tools|an alphabetically ordered and categorized tool catalog]].

__TOC__

==Rapid prototyping tools==

{{hatnote|Comparisons: [[our 3D printers]], [[our laser cutters]]}}

<gallery mode="nolines" widths="160" heights="160">
File:2.jpg|link=2|[[3D printer, FFF (ORD Bot Hadron) ID:2]]
File:3.jpg|link=3|[[3D printer, FFF (PrusaMD) ID:3]]
File:159.jpg|link=159|[[3D printer, resin (Anycubic Photon 5.5) ID:159]]
File:170.jpg|link=170|[[3D_printer, resin (ELEGOO Saturn) ID:170]]
File:160.jpg|link=160|[[Curing station (Anycubic Wash and Cure Machine) ID:160]]
File:Thunder-51-01.jpg|link=178|[[Thunder Nova 51 Laser ID:178]]
File:107.jpg|link=107|[[Laser cutter (Trotec Speedy 300) ID:107]]
File:141.jpg|link=141|[[CNC router, mini (TD 3040) ID:141]]
File:Precix-CNC-001.jpg|link=153|[[CNC router, wood (Precix) ID:153]]
File:LongMill-on-Shelf-01.png|link=143|[[CNC router, benchtop (SIENCI LongMill) ID:143]]
</gallery>

==Automotive tools==

<gallery mode="nolines" widths="160" heights="160">
File:8.jpg|[[Floor jack, blue ID:8]]
File:9.jpg|[[Trolley jack and axle stand kit (Certified) ID:9]]
File:11.jpg|[[Socket set ID:11]]
File:162.jpeg|[[Bike stand (Feedback Sport) ID:162]]
</gallery>

==Chemistry==

<gallery mode="nolines" widths="160" heights="160">
File:12.jpg|[[Oxygen concentrator (OGSI OG-15) ID:12]]
</gallery>

==Electronics equipment==

<gallery mode="nolines" widths="160" heights="160">
File:14.jpg|[[Counter (Lafayette 54517) ID:14]]
File:15.jpg|[[Decade box, capacitance (Servomex Controls Decade Capacitor Type B) ID:15]]
File:16.jpg|[[Function generator (John's) ID:16]]
File:18.jpg|[[Heat gun (Powerfist) ID:18]]
File:19.jpg|[[Logic analyzer (HP 1631D) ID:19]]
File:20.jpg|[[Multimeter, digital (Pro.Point 8344665) ID:20]]
File:167.jpg|[[Oscilloscope (Siglent SDS1104X-E) ID:167]]
File:23.jpg|[[Oscilloscope (Tektronix 2225) ID:23]]
File:24.jpg|[[Oscilloscope (Tektronix 2465A) ID:24]]
File:25.jpg|[[Oscilloscope, PC (Syscomp DSO-101) ID:25]]
File:26.jpg|[[Power supply, bench (GQ Electronics GQ-A305D) ID:26]]
File:27.jpg|[[Power supply, bench, 500 V (Heathkit PS-3) ID:27]]
File:28.jpg|[[Power supply, bench, 2-channel (TENMA 72-7245) ID:28]]
File:30.jpg|[[Hot-air rework station (GQ Electronics 5200) ID:30]]
File:31.jpg|[[Solder fume extractor (Metcal) ID:31]]
File:33.jpg|[[Waveform generator (Syscomp WGM-101) ID:33]]
File:34.jpg|[[Waveform monitor (Tektronix 1730) ID:34]]
File:145-Welcome-Monitor.png|[[Welcome Room Monitor ID:145]]
</gallery>

==Metalworking tools==

<gallery mode="nolines" widths="160" heights="160">
File:35.jpg|[[Angle grinder (DeWalt) ID:35]]
File:37.jpg|[[Bandsaw, metal, horizontal ID:37]]
File:165.jpg|[[Bandsaw, metal, horizontal (Westward UE-712) ID:165]]
File:39.jpg|[[Bench grinder (Powerfist) ID:39]]
File:40.jpg|[[Bench grinder (Trademaster PR14210) ID:40]]
File:151.jpg|[[Brake, box and pan, 24" (Magnum) ID:151]]
File:42.jpg|[[Drill press (Mastercraft) ID:42]]
File:45.jpg|[[Foundry, propane ID:45]]
File:121.jpg|[[Hydraulic press, 50-ton, electric ID:121]]
File:46.jpg|[[Lathe, metal (Challenger 1660G) ID:46]]
File:47.jpg|[[Lathe, miniature (Taig Microlathe II) ID:47]]
File:53.jpg|[[Metal shear (Magnum) ID:53]]
File:48.jpg|[[Milling machine (ACRA AM4V) ID:48]]
File:49.jpg|[[Milling machine, CNC (Tormach PCNC 1100) ID:49]]
File:173.png|[[Plasma Cutter (Hypertherm, Powermax85) ID:173]]
File:51.jpg|[[Plasma cutter, huge (Powercut 1500) ID:51]]
File:52.jpg|[[Plasma cutter, small (Miller Spectrum 375) ID:52]]
File:54.jpg|[[Vise, giant ID:54]]
File:56.jpg|[[Welding magnets ID:56]]
File:Metalworking pattern maker's vise.jpg|[[Metalworking pattern maker's vise]]
File:Metal drill press.jpg|[[HD gear driven drill press/mill]]
File:163.jpg|[[Pipe bender (Power Fist 12 ton hydraulic) ID:163]]
</gallery>

==Woodworking and plasticworking tools==

<gallery mode="nolines" widths="160" heights="160">
File:171-Wood-Lathe-Jet.jpg|[[Wood Lathe, JET JWL-1236 ID:171]]
File:57.jpg|[[Bandsaw, green ID:57]]
File:59.jpg|[[Clamps ID:59]]
File:61.jpg|[[Drill, hand, corded, black (Jobmate) ID:61]]
File:62.jpg|[[Drill, hand, corded, dark blue (Ryobi) ID:62]]
File:67.jpg|[[Drill, hand, cordless (DeWalt) ID:67]]
File:68.jpg|[[Drill, hand, corded (Makita DP3720) ID:68]]
File:69.jpg|[[Drill press, 8" (Jobmate) ID:69]]
File:70.jpg|[[Jigsaw, corded (Black & Decker) ID:70]]
File:72.jpg|[[Jigsaw (Skil) ID:72]]
File:75.jpg|[[Nailer, pneumatic, 2-in-1 ID:75]]
File:108.jpg|[[Planer (Jet JPM-13CS) ID:108]]
File:76.jpg|[[Plate joiner (Porter Cable 557) ID:76]]
File:140.jpg|[[Pocket hole jig (Kreg K3) ID:140]]
File:78.jpg|[[Rotary tool, corded (Mastercraft) ID:78]]
File:79.jpg|[[Rotary tool, cordless (Dremel) ID:79]]
File:124.jpg|[[Router table (Jeff's) ID:124]]
File:83.jpg|[[Sander, belt (Makita 9402) ID:83]]
File:84.jpg|[[Sander, belt/disc (Dremel 730) ID:84]]
File:85.jpg|[[Sander, detail (Ryobi) ID:85]]
File:106.jpg|[[Sander, drum (General International 15-250 M1) ID:106]]
File:138.jpg|[[Sander, random orbital (Ridgid R2601) ID:138]]
File:139.jpg|[[Sander, random orbital (Ridgid R2601) ID:139]]
File:88.jpg|[[Sander, straight-line/orbital (Black & Decker Deluxe) ID:88]]
File:89.jpg|[[Scroll saw (Dremel) ID:89]]
File:91.jpg|[[Table saw (Craftex CX201) ID:91]]
File:92.jpg|[[Thickness planer (Ryobi AP1301) ID:92]]
File:93.jpg|[[Vacuum, sawdust (Craftex CX404) ID:93]]
File:NoImage.png|[[Vise, wood ID:94]]
File:95.jpg|[[Vise, wood (Travis's) ID:95]]
File:Makita cordless jigsaw.jpg|cordless Makita jig saw
File:Ridgid random orbital sander (1 of 2, unknown which one).jpg|Ridgid random orbital sander (2 of these)
File:6" jointer.jpg|6" jointer
File:DeWalt sliding compound miter saw.jpg|12" Dewalt sliding compound miter saw
File:Wood tools sharpening station.jpg|A sharpening station with a plethora of tool sharpening grinders-jigs-etc
File:149.jpg|[[Drill press, floor mounted, variable speed ID:149]]
File:164.jpg|[[Handheld metal detector ID:164]]
File:168.jpg|[[Planer, 16" Auto Planer]]
File:172.jpg|[[Table saw (SawStop) ID:172]]
File:174.jpg|[[drying rack (coyle-made) ID:174]]
</gallery>

==Textile, Vinyl, and Media tools==

<gallery mode="nolines" widths="160" heights="160">
File:120.jpg|[[Sewing machine, domestic (Singer 1802) ID:120]]
File:Singer 211G155.jpg|[[Sewing machine, industrial (Singer 211G155) ID:147]]
File:144.jpg|[[Embroidery machine, CNC (Tajima TEJT II-C NEO 1501) ID:144]]
File:150.jpg|[[Sewing/embroidery machine, computer controlled (Singer Futura CE-250) ID:150]]
File:156.jpg|[[Sewing machine, domestic (Janome HD-1000) ID:156]]
File:157.jpg|[[Serger, 4 thread (Singer 14U34B) ID:157]]
File:158.jpg|[[Serger, 4 thread, (Janome MyLock 634D) ID:158]]
File:148.jpg|[[Vinyl cutter, big (Graphtec FC8000-75) ID:148]]
File:NoImage.png|Vinyl cutter, small (Silhouette Cameo), on loan from Jamie Frost
File:154.jpg|[[Heat press, digital (Geo Knight & Co, Inc. K20S) ID:154]]
File:155.jpg|[[Heat press, auto release (Insta Graphic Systems 158) ID:155]]
File:166.jpg|[[Printer, 44" Large Format (HP DesignJet T1200), ID:166]]
</gallery>

==Measuring and inspection tools==

{{hatnote|See also: the [[#Electronics equipment|electronics equipment section on this page]] for electrical and electronic measurement and test equipment.}}

<gallery mode="nolines" widths="160" heights="160">
File:97.jpg|[[Inspection mirror, 18" gooseneck ID:97]]
File:98.jpg|[[Magnifier lamp, large, with lid ID:98]]
File:99.jpg|[[Magnifier lamp, large, without lid ID:99]]
File:100.jpg|[[Magnifier lamp, small, with lid ID:100]]
File:101.jpg|[[Measuring tapes ID:101]]
File:102.jpg|[[Rulers ID:102]]
File:103.jpg|[[Squares ID:103]]
File:104.jpg|[[Thermometer, infrared (H64) ID:104]]
</gallery>

==Miscellaneous tools==

<gallery mode="nolines" widths="160" heights="160">
File:111.jpg|[[Air compressor, 80-gallon (MAXair Premium) ID:111]]
File:112.jpg|[[Air compressor, silent ID:112]]
File:115.jpg|[[Engraver ID:115]]
File:116.jpg|[[Hand truck, red ID:116]]
File:117.jpg|[[Hot-wire foam cutter, handheld, 4.5"×5.5" (Woodland Scenics) ID:117]]
File:118.jpg|[[Hot-wire foam cutter, tabletop, 14"×12" ID:118]]
File:127.jpg|[[Oil can, blue ID:127]]
File:128.jpg|[[Painting tools ID:128]]
File:129.jpg|[[Pinball machine (Williams Road Kings) ID:129]]
File:130.jpg|[[Sandblasting cabinet, floor, blue (Powerfist) ID:130]]
File:131.jpg|[[Screwdriver magnetizer/demagnetizer (Wiha 40010) ID:131]]
File:132.jpg|[[Shop vacuum, orange ID:132]]
File:133.jpg|[[Staple gun (Arrow T-18) ID:133]]
File:122.jpg|[[Tile work surfaces ID:122]]
File:123.jpg|[[Tile work surfaces ID:123]]
File:134.jpg|[[Vacuum cart ID:134]]
File:136.jpg|[[Vacuum cleaner, portable ID:136]]
File:137.jpg|[[Vacuum pump (Edwards SpeediVac ED200) ID:137]]
File:161.jpg|[[Laminator (Scotch TL902) ID:161]]
File:166.jpg|[[Printer, 44" Large Format (HP DesignJet T1200), ID:166]]
File:169.png|[[ADS-B Base Station, FlightAware, ID:169]]
File:176.jpg|[[Vending machine, pop (Vendo 576) ID:176]]
File:177.jpg|[[Vending machine, snacks (Crane 173) ID:177]]
</gallery>

==Removed equipment==

In case they are brought back, or, so people who could have sworn we had a tool know it was removed.

<gallery style="background: darksalmon" mode="nolines">
File:6.jpg|[[Laser cutter, large (Rabbit Laser RL-80-1290) ID:6]]
File:3DP RapMan.jpg|[[3D printer (3D Systems RapMan)]]
File:3D printer, Come3D!.jpg|[[3D printer (Come3D!)]]
File:3DP Cupcake.jpg|[[3D printer (MakerBot Cupcake)]]
File:1.jpg|[[3D printer, FFF (IIIP) ID:1]]
File:3D printer, Nathan Ward's RepRap.jpg|[[3D printer, FFF (RepRap)]]
File:3D printer, Yin's Wanhao.jpg|[[3D printer, FFF (Wanhao Duplicator i3)]]
File:InVision si2.jpg|[[3D printer, MJM (3D Systems InVision si2)]]
File:NoImage.png|[[3D printer, SLA (mUVe 1) ID:5]]
File:Compressor Dewalt.jpg|[[Air compressor, 4-gallon (DeWalt)]]
File:Compressor Big.jpg|[[Air compressor, 17-gallon]]
File:110.jpg|[[Air compressor, 60-gallon (Campbell Hausfeld) ID:110]]
File:Reciprocating compressor.jpg|[[Air compressor, 80-gallon (Ingersoll Rand T30)]]
File:113.jpg|[[Air pump, foot-operated (Bell FootPumper) ID:113]]
File:Angle Grinder.jpg|[[Angle grinder (Kawasaki)]]
File:Anvil 75lb.jpg|[[Anvil]]
File:Bandsaw Horizontal.jpg|[[Bandsaw, metal, horizontal (Craftex B013N)]]
File:Bending Brake.jpg|[[Bending brake, 30" (Powerfist)]]
File:114.jpg|[[Bicycle tire jig ID:114]]
File:Buffer Benchtop.jpg|[[Buffer (Clarke 2H 5AB)]]
File:13.jpg|[[Counter (Fluke 1910A Multi-Counter) ID:13]]
File:Dewars.jpg|[[Dewars, 50-litre]]
File:Drill Dewalt.jpg|[[Drill, corded (DeWalt)]]
File:Pick N Place.jpg|[[Electronics assembly pick and place machine (Multitronics 2000LX)]]
File:Forge Propane 2.jpg|[[Forge, propane (Jim's)]]
File:43.jpg|[[Forge (Travis's) ID:43]]
File:NoImage.png|[[Forge, propane, pass-through ID:44]]
File:17.jpg|[[Function generator (Krohn–Hite 5100A) ID:17]]
File:Impact Driver.jpg|[[Impact driver (DeWalt)]]
File:7.jpg|[[Laser cutter, small ID:7]]
File:Lathe, Torrent T.72-42.jpg|[[Lathe, metal (Torrent T.72-42)]]
File:Lathe Mill.jpg|[[Lathe–mill combination (Craftex B2229)]]
File:Lathe Wood Mini.jpg|[[Lathe, wood (Haussmann)]]
File:MaxNC10.jpg|[[Milling machine, CNC, mini (MAXNC 10)]]
File:Audio mixing board.jpg|[[PA system (Dan Damron's)]]
File:22.jpg|[[Oscilloscope (Kikusui COS 5060) ID:22]]
File:50.jpg|[[Oxyacetylene torch, large ID:50]]
File:Parts washer, Powerfist 3.5 L.jpg|[[Parts washer, 3.5 L (Powerfist)]]
File:Plasma cutter.thumbnail.jpg|[[Plasma cutter, CNC (Kyle Paavola's)]]
File:Router Plunge Makita.jpg|[[Router, plunge (Makita 3612BR)]]
File:10.jpg|[[Press (Powerfist) ID:10]]
File:NoImage.png|[[Router table, wooden ID:81]]
File:87.jpg|[[87|Sander, random orbital (Skil 7492) ID:87]]
File:Chop Saw.jpg|[[Saw, compound mitre (Ryobi)]]
File:Chopsaw Metal.jpg|[[Saw, compound mitre, metal (Ryobi)]]
File:Reciprocating Saw.jpg|[[Saw, sabre (Mastercraft)]]
File:Skil Saw BD.jpg|[[Saw, handheld circular, 7 1/4" (Black & Decker)]]
File:Skil Saw Red.jpg|[[Saw, handheld circular (Skil)]]
File:90.jpg|[[Scroll saw (Mastercraft 55-6714-6) ID:90]]
File:119.jpg|[[Sewing machine, industrial (Relsew) ID:119]]
File:Shaper, metal.jpg|[[Shaper, 7"]]
File:Taps Grey.jpg|[[Tap & die set (Mastercraft)]]
File:OxyAce Mini.jpg|[[Torch, oxygen–acetylene, mini]]
File:32.jpg|[[UV photomasker (Dan's) ID:32]]
File:135.jpg|[[Vacuum pump ID:135]]
File:Vice Medium.jpg|[[Vise, medium (Irwin)]]
File:Welder MIG.jpg|[[Welder, MIG (Lincoln Weld-Pak 100)]]
File:55.jpg|[[Welder, stick, orange (Acklands 225 AC Sizzler) ID:55]]
File:109.jpg|[[Welder, Stick, AC/DC (Miller Thunderbolt XL) ID:109]]
File:74.jpg|[[Miter saw, compound, sliding (Hitachi) ID:74]]
File:142.jpg|[[Brake, shear, roller, 52" (Magnum) ID:142]]
File:146.jpg|[[Garment graphic printer, direct inject (Brother GT-361) ID:146]]
</gallery>

Tools we have

2024-03-11T02:42:19Z

Pat.spencer: /* Rapid prototyping tools */

Want to '''add a new tool'''? Follow [[Protospace Wiki:Adding new tools|this procedure]]!

We can always use new tools. Please feel free to [[contact information|contact Protospace]] to donate, arrange for pickup, or drop them off in person.

If you are interested in knowing what kind of tools we are looking for, we also have a member-managed [[Tools we want|tool wishlist]], but your best bet on figuring out if we want something is simply asking on our [https://forum.protospace.ca forum].

We also have [[:Category:Tools|an alphabetically ordered and categorized tool catalog]].

__TOC__

==Rapid prototyping tools==

{{hatnote|Comparisons: [[our 3D printers]], [[our laser cutters]]}}

<gallery mode="nolines" widths="160" heights="160">
File:2.jpg|link=2|[[3D printer, FFF (ORD Bot Hadron) ID:2]]
File:3.jpg|link=3|[[3D printer, FFF (PrusaMD) ID:3]]
File:159.jpg|link=159|[[3D printer, resin (Anycubic Photon 5.5) ID:159]]
File:170.jpg|link=170|[[3D_printer, resin (ELEGOO Saturn) ID:170]]
File:160.jpg|link=160|[[Curing station (Anycubic Wash and Cure Machine) ID:160]]
File:Thunder-51-01.jpg|link=178|[[Thunder Nova 51 Laser ID:178]]
File:107.jpg|link=107|[[Laser cutter (Trotec Speedy 300) ID:107]]
File:141.jpg|link=141|[[CNC router, mini (TD 3040) ID:141]]
File:Precix-CNC-001.jpg|[[CNC router, wood (Precix) ID:153]]
File:LongMill-on-Shelf-01.png|link=143|[[CNC router, benchtop (SIENCI LongMill) ID:143]]
</gallery>

==Automotive tools==

<gallery mode="nolines" widths="160" heights="160">
File:8.jpg|[[Floor jack, blue ID:8]]
File:9.jpg|[[Trolley jack and axle stand kit (Certified) ID:9]]
File:11.jpg|[[Socket set ID:11]]
File:162.jpeg|[[Bike stand (Feedback Sport) ID:162]]
</gallery>

==Chemistry==

<gallery mode="nolines" widths="160" heights="160">
File:12.jpg|[[Oxygen concentrator (OGSI OG-15) ID:12]]
</gallery>

==Electronics equipment==

<gallery mode="nolines" widths="160" heights="160">
File:14.jpg|[[Counter (Lafayette 54517) ID:14]]
File:15.jpg|[[Decade box, capacitance (Servomex Controls Decade Capacitor Type B) ID:15]]
File:16.jpg|[[Function generator (John's) ID:16]]
File:18.jpg|[[Heat gun (Powerfist) ID:18]]
File:19.jpg|[[Logic analyzer (HP 1631D) ID:19]]
File:20.jpg|[[Multimeter, digital (Pro.Point 8344665) ID:20]]
File:167.jpg|[[Oscilloscope (Siglent SDS1104X-E) ID:167]]
File:23.jpg|[[Oscilloscope (Tektronix 2225) ID:23]]
File:24.jpg|[[Oscilloscope (Tektronix 2465A) ID:24]]
File:25.jpg|[[Oscilloscope, PC (Syscomp DSO-101) ID:25]]
File:26.jpg|[[Power supply, bench (GQ Electronics GQ-A305D) ID:26]]
File:27.jpg|[[Power supply, bench, 500 V (Heathkit PS-3) ID:27]]
File:28.jpg|[[Power supply, bench, 2-channel (TENMA 72-7245) ID:28]]
File:30.jpg|[[Hot-air rework station (GQ Electronics 5200) ID:30]]
File:31.jpg|[[Solder fume extractor (Metcal) ID:31]]
File:33.jpg|[[Waveform generator (Syscomp WGM-101) ID:33]]
File:34.jpg|[[Waveform monitor (Tektronix 1730) ID:34]]
File:145-Welcome-Monitor.png|[[Welcome Room Monitor ID:145]]
</gallery>

==Metalworking tools==

<gallery mode="nolines" widths="160" heights="160">
File:35.jpg|[[Angle grinder (DeWalt) ID:35]]
File:37.jpg|[[Bandsaw, metal, horizontal ID:37]]
File:165.jpg|[[Bandsaw, metal, horizontal (Westward UE-712) ID:165]]
File:39.jpg|[[Bench grinder (Powerfist) ID:39]]
File:40.jpg|[[Bench grinder (Trademaster PR14210) ID:40]]
File:151.jpg|[[Brake, box and pan, 24" (Magnum) ID:151]]
File:42.jpg|[[Drill press (Mastercraft) ID:42]]
File:45.jpg|[[Foundry, propane ID:45]]
File:121.jpg|[[Hydraulic press, 50-ton, electric ID:121]]
File:46.jpg|[[Lathe, metal (Challenger 1660G) ID:46]]
File:47.jpg|[[Lathe, miniature (Taig Microlathe II) ID:47]]
File:53.jpg|[[Metal shear (Magnum) ID:53]]
File:48.jpg|[[Milling machine (ACRA AM4V) ID:48]]
File:49.jpg|[[Milling machine, CNC (Tormach PCNC 1100) ID:49]]
File:173.png|[[Plasma Cutter (Hypertherm, Powermax85) ID:173]]
File:51.jpg|[[Plasma cutter, huge (Powercut 1500) ID:51]]
File:52.jpg|[[Plasma cutter, small (Miller Spectrum 375) ID:52]]
File:54.jpg|[[Vise, giant ID:54]]
File:56.jpg|[[Welding magnets ID:56]]
File:Metalworking pattern maker's vise.jpg|[[Metalworking pattern maker's vise]]
File:Metal drill press.jpg|[[HD gear driven drill press/mill]]
File:163.jpg|[[Pipe bender (Power Fist 12 ton hydraulic) ID:163]]
</gallery>

==Woodworking and plasticworking tools==

<gallery mode="nolines" widths="160" heights="160">
File:171-Wood-Lathe-Jet.jpg|[[Wood Lathe, JET JWL-1236 ID:171]]
File:57.jpg|[[Bandsaw, green ID:57]]
File:59.jpg|[[Clamps ID:59]]
File:61.jpg|[[Drill, hand, corded, black (Jobmate) ID:61]]
File:62.jpg|[[Drill, hand, corded, dark blue (Ryobi) ID:62]]
File:67.jpg|[[Drill, hand, cordless (DeWalt) ID:67]]
File:68.jpg|[[Drill, hand, corded (Makita DP3720) ID:68]]
File:69.jpg|[[Drill press, 8" (Jobmate) ID:69]]
File:70.jpg|[[Jigsaw, corded (Black & Decker) ID:70]]
File:72.jpg|[[Jigsaw (Skil) ID:72]]
File:75.jpg|[[Nailer, pneumatic, 2-in-1 ID:75]]
File:108.jpg|[[Planer (Jet JPM-13CS) ID:108]]
File:76.jpg|[[Plate joiner (Porter Cable 557) ID:76]]
File:140.jpg|[[Pocket hole jig (Kreg K3) ID:140]]
File:78.jpg|[[Rotary tool, corded (Mastercraft) ID:78]]
File:79.jpg|[[Rotary tool, cordless (Dremel) ID:79]]
File:124.jpg|[[Router table (Jeff's) ID:124]]
File:83.jpg|[[Sander, belt (Makita 9402) ID:83]]
File:84.jpg|[[Sander, belt/disc (Dremel 730) ID:84]]
File:85.jpg|[[Sander, detail (Ryobi) ID:85]]
File:106.jpg|[[Sander, drum (General International 15-250 M1) ID:106]]
File:138.jpg|[[Sander, random orbital (Ridgid R2601) ID:138]]
File:139.jpg|[[Sander, random orbital (Ridgid R2601) ID:139]]
File:88.jpg|[[Sander, straight-line/orbital (Black & Decker Deluxe) ID:88]]
File:89.jpg|[[Scroll saw (Dremel) ID:89]]
File:91.jpg|[[Table saw (Craftex CX201) ID:91]]
File:92.jpg|[[Thickness planer (Ryobi AP1301) ID:92]]
File:93.jpg|[[Vacuum, sawdust (Craftex CX404) ID:93]]
File:NoImage.png|[[Vise, wood ID:94]]
File:95.jpg|[[Vise, wood (Travis's) ID:95]]
File:Makita cordless jigsaw.jpg|cordless Makita jig saw
File:Ridgid random orbital sander (1 of 2, unknown which one).jpg|Ridgid random orbital sander (2 of these)
File:6" jointer.jpg|6" jointer
File:DeWalt sliding compound miter saw.jpg|12" Dewalt sliding compound miter saw
File:Wood tools sharpening station.jpg|A sharpening station with a plethora of tool sharpening grinders-jigs-etc
File:149.jpg|[[Drill press, floor mounted, variable speed ID:149]]
File:164.jpg|[[Handheld metal detector ID:164]]
File:168.jpg|[[Planer, 16" Auto Planer]]
File:172.jpg|[[Table saw (SawStop) ID:172]]
File:174.jpg|[[drying rack (coyle-made) ID:174]]
</gallery>

==Textile, Vinyl, and Media tools==

<gallery mode="nolines" widths="160" heights="160">
File:120.jpg|[[Sewing machine, domestic (Singer 1802) ID:120]]
File:Singer 211G155.jpg|[[Sewing machine, industrial (Singer 211G155) ID:147]]
File:144.jpg|[[Embroidery machine, CNC (Tajima TEJT II-C NEO 1501) ID:144]]
File:150.jpg|[[Sewing/embroidery machine, computer controlled (Singer Futura CE-250) ID:150]]
File:156.jpg|[[Sewing machine, domestic (Janome HD-1000) ID:156]]
File:157.jpg|[[Serger, 4 thread (Singer 14U34B) ID:157]]
File:158.jpg|[[Serger, 4 thread, (Janome MyLock 634D) ID:158]]
File:148.jpg|[[Vinyl cutter, big (Graphtec FC8000-75) ID:148]]
File:NoImage.png|Vinyl cutter, small (Silhouette Cameo), on loan from Jamie Frost
File:154.jpg|[[Heat press, digital (Geo Knight & Co, Inc. K20S) ID:154]]
File:155.jpg|[[Heat press, auto release (Insta Graphic Systems 158) ID:155]]
File:166.jpg|[[Printer, 44" Large Format (HP DesignJet T1200), ID:166]]
</gallery>

==Measuring and inspection tools==

{{hatnote|See also: the [[#Electronics equipment|electronics equipment section on this page]] for electrical and electronic measurement and test equipment.}}

<gallery mode="nolines" widths="160" heights="160">
File:97.jpg|[[Inspection mirror, 18" gooseneck ID:97]]
File:98.jpg|[[Magnifier lamp, large, with lid ID:98]]
File:99.jpg|[[Magnifier lamp, large, without lid ID:99]]
File:100.jpg|[[Magnifier lamp, small, with lid ID:100]]
File:101.jpg|[[Measuring tapes ID:101]]
File:102.jpg|[[Rulers ID:102]]
File:103.jpg|[[Squares ID:103]]
File:104.jpg|[[Thermometer, infrared (H64) ID:104]]
</gallery>

==Miscellaneous tools==

<gallery mode="nolines" widths="160" heights="160">
File:111.jpg|[[Air compressor, 80-gallon (MAXair Premium) ID:111]]
File:112.jpg|[[Air compressor, silent ID:112]]
File:115.jpg|[[Engraver ID:115]]
File:116.jpg|[[Hand truck, red ID:116]]
File:117.jpg|[[Hot-wire foam cutter, handheld, 4.5"×5.5" (Woodland Scenics) ID:117]]
File:118.jpg|[[Hot-wire foam cutter, tabletop, 14"×12" ID:118]]
File:127.jpg|[[Oil can, blue ID:127]]
File:128.jpg|[[Painting tools ID:128]]
File:129.jpg|[[Pinball machine (Williams Road Kings) ID:129]]
File:130.jpg|[[Sandblasting cabinet, floor, blue (Powerfist) ID:130]]
File:131.jpg|[[Screwdriver magnetizer/demagnetizer (Wiha 40010) ID:131]]
File:132.jpg|[[Shop vacuum, orange ID:132]]
File:133.jpg|[[Staple gun (Arrow T-18) ID:133]]
File:122.jpg|[[Tile work surfaces ID:122]]
File:123.jpg|[[Tile work surfaces ID:123]]
File:134.jpg|[[Vacuum cart ID:134]]
File:136.jpg|[[Vacuum cleaner, portable ID:136]]
File:137.jpg|[[Vacuum pump (Edwards SpeediVac ED200) ID:137]]
File:161.jpg|[[Laminator (Scotch TL902) ID:161]]
File:166.jpg|[[Printer, 44" Large Format (HP DesignJet T1200), ID:166]]
File:169.png|[[ADS-B Base Station, FlightAware, ID:169]]
File:176.jpg|[[Vending machine, pop (Vendo 576) ID:176]]
File:177.jpg|[[Vending machine, snacks (Crane 173) ID:177]]
</gallery>

==Removed equipment==

In case they are brought back, or, so people who could have sworn we had a tool know it was removed.

<gallery style="background: darksalmon" mode="nolines">
File:6.jpg|[[Laser cutter, large (Rabbit Laser RL-80-1290) ID:6]]
File:3DP RapMan.jpg|[[3D printer (3D Systems RapMan)]]
File:3D printer, Come3D!.jpg|[[3D printer (Come3D!)]]
File:3DP Cupcake.jpg|[[3D printer (MakerBot Cupcake)]]
File:1.jpg|[[3D printer, FFF (IIIP) ID:1]]
File:3D printer, Nathan Ward's RepRap.jpg|[[3D printer, FFF (RepRap)]]
File:3D printer, Yin's Wanhao.jpg|[[3D printer, FFF (Wanhao Duplicator i3)]]
File:InVision si2.jpg|[[3D printer, MJM (3D Systems InVision si2)]]
File:NoImage.png|[[3D printer, SLA (mUVe 1) ID:5]]
File:Compressor Dewalt.jpg|[[Air compressor, 4-gallon (DeWalt)]]
File:Compressor Big.jpg|[[Air compressor, 17-gallon]]
File:110.jpg|[[Air compressor, 60-gallon (Campbell Hausfeld) ID:110]]
File:Reciprocating compressor.jpg|[[Air compressor, 80-gallon (Ingersoll Rand T30)]]
File:113.jpg|[[Air pump, foot-operated (Bell FootPumper) ID:113]]
File:Angle Grinder.jpg|[[Angle grinder (Kawasaki)]]
File:Anvil 75lb.jpg|[[Anvil]]
File:Bandsaw Horizontal.jpg|[[Bandsaw, metal, horizontal (Craftex B013N)]]
File:Bending Brake.jpg|[[Bending brake, 30" (Powerfist)]]
File:114.jpg|[[Bicycle tire jig ID:114]]
File:Buffer Benchtop.jpg|[[Buffer (Clarke 2H 5AB)]]
File:13.jpg|[[Counter (Fluke 1910A Multi-Counter) ID:13]]
File:Dewars.jpg|[[Dewars, 50-litre]]
File:Drill Dewalt.jpg|[[Drill, corded (DeWalt)]]
File:Pick N Place.jpg|[[Electronics assembly pick and place machine (Multitronics 2000LX)]]
File:Forge Propane 2.jpg|[[Forge, propane (Jim's)]]
File:43.jpg|[[Forge (Travis's) ID:43]]
File:NoImage.png|[[Forge, propane, pass-through ID:44]]
File:17.jpg|[[Function generator (Krohn–Hite 5100A) ID:17]]
File:Impact Driver.jpg|[[Impact driver (DeWalt)]]
File:7.jpg|[[Laser cutter, small ID:7]]
File:Lathe, Torrent T.72-42.jpg|[[Lathe, metal (Torrent T.72-42)]]
File:Lathe Mill.jpg|[[Lathe–mill combination (Craftex B2229)]]
File:Lathe Wood Mini.jpg|[[Lathe, wood (Haussmann)]]
File:MaxNC10.jpg|[[Milling machine, CNC, mini (MAXNC 10)]]
File:Audio mixing board.jpg|[[PA system (Dan Damron's)]]
File:22.jpg|[[Oscilloscope (Kikusui COS 5060) ID:22]]
File:50.jpg|[[Oxyacetylene torch, large ID:50]]
File:Parts washer, Powerfist 3.5 L.jpg|[[Parts washer, 3.5 L (Powerfist)]]
File:Plasma cutter.thumbnail.jpg|[[Plasma cutter, CNC (Kyle Paavola's)]]
File:Router Plunge Makita.jpg|[[Router, plunge (Makita 3612BR)]]
File:10.jpg|[[Press (Powerfist) ID:10]]
File:NoImage.png|[[Router table, wooden ID:81]]
File:87.jpg|[[87|Sander, random orbital (Skil 7492) ID:87]]
File:Chop Saw.jpg|[[Saw, compound mitre (Ryobi)]]
File:Chopsaw Metal.jpg|[[Saw, compound mitre, metal (Ryobi)]]
File:Reciprocating Saw.jpg|[[Saw, sabre (Mastercraft)]]
File:Skil Saw BD.jpg|[[Saw, handheld circular, 7 1/4" (Black & Decker)]]
File:Skil Saw Red.jpg|[[Saw, handheld circular (Skil)]]
File:90.jpg|[[Scroll saw (Mastercraft 55-6714-6) ID:90]]
File:119.jpg|[[Sewing machine, industrial (Relsew) ID:119]]
File:Shaper, metal.jpg|[[Shaper, 7"]]
File:Taps Grey.jpg|[[Tap & die set (Mastercraft)]]
File:OxyAce Mini.jpg|[[Torch, oxygen–acetylene, mini]]
File:32.jpg|[[UV photomasker (Dan's) ID:32]]
File:135.jpg|[[Vacuum pump ID:135]]
File:Vice Medium.jpg|[[Vise, medium (Irwin)]]
File:Welder MIG.jpg|[[Welder, MIG (Lincoln Weld-Pak 100)]]
File:55.jpg|[[Welder, stick, orange (Acklands 225 AC Sizzler) ID:55]]
File:109.jpg|[[Welder, Stick, AC/DC (Miller Thunderbolt XL) ID:109]]
File:74.jpg|[[Miter saw, compound, sliding (Hitachi) ID:74]]
File:142.jpg|[[Brake, shear, roller, 52" (Magnum) ID:142]]
File:146.jpg|[[Garment graphic printer, direct inject (Brother GT-361) ID:146]]
</gallery>

Tools we have

2024-03-11T02:29:59Z

Pat.spencer: added "link=##|" back in to some entries. I have confirmed that these get stripped if you edit and save using the visual edit instead of "Edit Source".

Want to '''add a new tool'''? Follow [[Protospace Wiki:Adding new tools|this procedure]]!

We can always use new tools. Please feel free to [[contact information|contact Protospace]] to donate, arrange for pickup, or drop them off in person.

If you are interested in knowing what kind of tools we are looking for, we also have a member-managed [[Tools we want|tool wishlist]], but your best bet on figuring out if we want something is simply asking on our [https://forum.protospace.ca forum].

We also have [[:Category:Tools|an alphabetically ordered and categorized tool catalog]].

__TOC__

==Rapid prototyping tools==

{{hatnote|Comparisons: [[our 3D printers]], [[our laser cutters]]}}

<gallery mode="nolines" widths="160" heights="160">
File:2.jpg|link=2|[[3D printer, FFF (ORD Bot Hadron) ID:2]]
File:3.jpg|link=3|[[3D printer, FFF (PrusaMD) ID:3]]
File:159.jpg|link=159|[[3D printer, resin (Anycubic Photon 5.5) ID:159]]
File:170.jpg|link=170|[[3D_printer, resin (ELEGOO Saturn) ID:170]]
File:160.jpg|link=160|[[Curing station (Anycubic Wash and Cure Machine) ID:160]]
File:Thunder-51-01.jpg|link=178|[[Thunder Nova 51 Laser ID:178]]
File:107.jpg|link=107|[[Laser cutter (Trotec Speedy 300) ID:107]]
File:141.jpg|link=141|[[CNC router, mini (TD 3040) ID:141]]
File:Precix-CNC-001.jpg|[[CNC router, wood (Precix) ID:153]]
File:LongMill-on-Shelf-01.png|[[CNC router, benchtop (SIENCI LongMill) ID:143]]
</gallery>

==Automotive tools==

<gallery mode="nolines" widths="160" heights="160">
File:8.jpg|[[Floor jack, blue ID:8]]
File:9.jpg|[[Trolley jack and axle stand kit (Certified) ID:9]]
File:11.jpg|[[Socket set ID:11]]
File:162.jpeg|[[Bike stand (Feedback Sport) ID:162]]
</gallery>

==Chemistry==

<gallery mode="nolines" widths="160" heights="160">
File:12.jpg|[[Oxygen concentrator (OGSI OG-15) ID:12]]
</gallery>

==Electronics equipment==

<gallery mode="nolines" widths="160" heights="160">
File:14.jpg|[[Counter (Lafayette 54517) ID:14]]
File:15.jpg|[[Decade box, capacitance (Servomex Controls Decade Capacitor Type B) ID:15]]
File:16.jpg|[[Function generator (John's) ID:16]]
File:18.jpg|[[Heat gun (Powerfist) ID:18]]
File:19.jpg|[[Logic analyzer (HP 1631D) ID:19]]
File:20.jpg|[[Multimeter, digital (Pro.Point 8344665) ID:20]]
File:167.jpg|[[Oscilloscope (Siglent SDS1104X-E) ID:167]]
File:23.jpg|[[Oscilloscope (Tektronix 2225) ID:23]]
File:24.jpg|[[Oscilloscope (Tektronix 2465A) ID:24]]
File:25.jpg|[[Oscilloscope, PC (Syscomp DSO-101) ID:25]]
File:26.jpg|[[Power supply, bench (GQ Electronics GQ-A305D) ID:26]]
File:27.jpg|[[Power supply, bench, 500 V (Heathkit PS-3) ID:27]]
File:28.jpg|[[Power supply, bench, 2-channel (TENMA 72-7245) ID:28]]
File:30.jpg|[[Hot-air rework station (GQ Electronics 5200) ID:30]]
File:31.jpg|[[Solder fume extractor (Metcal) ID:31]]
File:33.jpg|[[Waveform generator (Syscomp WGM-101) ID:33]]
File:34.jpg|[[Waveform monitor (Tektronix 1730) ID:34]]
File:145-Welcome-Monitor.png|[[Welcome Room Monitor ID:145]]
</gallery>

==Metalworking tools==

<gallery mode="nolines" widths="160" heights="160">
File:35.jpg|[[Angle grinder (DeWalt) ID:35]]
File:37.jpg|[[Bandsaw, metal, horizontal ID:37]]
File:165.jpg|[[Bandsaw, metal, horizontal (Westward UE-712) ID:165]]
File:39.jpg|[[Bench grinder (Powerfist) ID:39]]
File:40.jpg|[[Bench grinder (Trademaster PR14210) ID:40]]
File:151.jpg|[[Brake, box and pan, 24" (Magnum) ID:151]]
File:42.jpg|[[Drill press (Mastercraft) ID:42]]
File:45.jpg|[[Foundry, propane ID:45]]
File:121.jpg|[[Hydraulic press, 50-ton, electric ID:121]]
File:46.jpg|[[Lathe, metal (Challenger 1660G) ID:46]]
File:47.jpg|[[Lathe, miniature (Taig Microlathe II) ID:47]]
File:53.jpg|[[Metal shear (Magnum) ID:53]]
File:48.jpg|[[Milling machine (ACRA AM4V) ID:48]]
File:49.jpg|[[Milling machine, CNC (Tormach PCNC 1100) ID:49]]
File:173.png|[[Plasma Cutter (Hypertherm, Powermax85) ID:173]]
File:51.jpg|[[Plasma cutter, huge (Powercut 1500) ID:51]]
File:52.jpg|[[Plasma cutter, small (Miller Spectrum 375) ID:52]]
File:54.jpg|[[Vise, giant ID:54]]
File:56.jpg|[[Welding magnets ID:56]]
File:Metalworking pattern maker's vise.jpg|[[Metalworking pattern maker's vise]]
File:Metal drill press.jpg|[[HD gear driven drill press/mill]]
File:163.jpg|[[Pipe bender (Power Fist 12 ton hydraulic) ID:163]]
</gallery>

==Woodworking and plasticworking tools==

<gallery mode="nolines" widths="160" heights="160">
File:171-Wood-Lathe-Jet.jpg|[[Wood Lathe, JET JWL-1236 ID:171]]
File:57.jpg|[[Bandsaw, green ID:57]]
File:59.jpg|[[Clamps ID:59]]
File:61.jpg|[[Drill, hand, corded, black (Jobmate) ID:61]]
File:62.jpg|[[Drill, hand, corded, dark blue (Ryobi) ID:62]]
File:67.jpg|[[Drill, hand, cordless (DeWalt) ID:67]]
File:68.jpg|[[Drill, hand, corded (Makita DP3720) ID:68]]
File:69.jpg|[[Drill press, 8" (Jobmate) ID:69]]
File:70.jpg|[[Jigsaw, corded (Black & Decker) ID:70]]
File:72.jpg|[[Jigsaw (Skil) ID:72]]
File:75.jpg|[[Nailer, pneumatic, 2-in-1 ID:75]]
File:108.jpg|[[Planer (Jet JPM-13CS) ID:108]]
File:76.jpg|[[Plate joiner (Porter Cable 557) ID:76]]
File:140.jpg|[[Pocket hole jig (Kreg K3) ID:140]]
File:78.jpg|[[Rotary tool, corded (Mastercraft) ID:78]]
File:79.jpg|[[Rotary tool, cordless (Dremel) ID:79]]
File:124.jpg|[[Router table (Jeff's) ID:124]]
File:83.jpg|[[Sander, belt (Makita 9402) ID:83]]
File:84.jpg|[[Sander, belt/disc (Dremel 730) ID:84]]
File:85.jpg|[[Sander, detail (Ryobi) ID:85]]
File:106.jpg|[[Sander, drum (General International 15-250 M1) ID:106]]
File:138.jpg|[[Sander, random orbital (Ridgid R2601) ID:138]]
File:139.jpg|[[Sander, random orbital (Ridgid R2601) ID:139]]
File:88.jpg|[[Sander, straight-line/orbital (Black & Decker Deluxe) ID:88]]
File:89.jpg|[[Scroll saw (Dremel) ID:89]]
File:91.jpg|[[Table saw (Craftex CX201) ID:91]]
File:92.jpg|[[Thickness planer (Ryobi AP1301) ID:92]]
File:93.jpg|[[Vacuum, sawdust (Craftex CX404) ID:93]]
File:NoImage.png|[[Vise, wood ID:94]]
File:95.jpg|[[Vise, wood (Travis's) ID:95]]
File:Makita cordless jigsaw.jpg|cordless Makita jig saw
File:Ridgid random orbital sander (1 of 2, unknown which one).jpg|Ridgid random orbital sander (2 of these)
File:6" jointer.jpg|6" jointer
File:DeWalt sliding compound miter saw.jpg|12" Dewalt sliding compound miter saw
File:Wood tools sharpening station.jpg|A sharpening station with a plethora of tool sharpening grinders-jigs-etc
File:149.jpg|[[Drill press, floor mounted, variable speed ID:149]]
File:164.jpg|[[Handheld metal detector ID:164]]
File:168.jpg|[[Planer, 16" Auto Planer]]
File:172.jpg|[[Table saw (SawStop) ID:172]]
File:174.jpg|[[drying rack (coyle-made) ID:174]]
</gallery>

==Textile, Vinyl, and Media tools==

<gallery mode="nolines" widths="160" heights="160">
File:120.jpg|[[Sewing machine, domestic (Singer 1802) ID:120]]
File:Singer 211G155.jpg|[[Sewing machine, industrial (Singer 211G155) ID:147]]
File:144.jpg|[[Embroidery machine, CNC (Tajima TEJT II-C NEO 1501) ID:144]]
File:150.jpg|[[Sewing/embroidery machine, computer controlled (Singer Futura CE-250) ID:150]]
File:156.jpg|[[Sewing machine, domestic (Janome HD-1000) ID:156]]
File:157.jpg|[[Serger, 4 thread (Singer 14U34B) ID:157]]
File:158.jpg|[[Serger, 4 thread, (Janome MyLock 634D) ID:158]]
File:148.jpg|[[Vinyl cutter, big (Graphtec FC8000-75) ID:148]]
File:NoImage.png|Vinyl cutter, small (Silhouette Cameo), on loan from Jamie Frost
File:154.jpg|[[Heat press, digital (Geo Knight & Co, Inc. K20S) ID:154]]
File:155.jpg|[[Heat press, auto release (Insta Graphic Systems 158) ID:155]]
File:166.jpg|[[Printer, 44" Large Format (HP DesignJet T1200), ID:166]]
</gallery>

==Measuring and inspection tools==

{{hatnote|See also: the [[#Electronics equipment|electronics equipment section on this page]] for electrical and electronic measurement and test equipment.}}

<gallery mode="nolines" widths="160" heights="160">
File:97.jpg|[[Inspection mirror, 18" gooseneck ID:97]]
File:98.jpg|[[Magnifier lamp, large, with lid ID:98]]
File:99.jpg|[[Magnifier lamp, large, without lid ID:99]]
File:100.jpg|[[Magnifier lamp, small, with lid ID:100]]
File:101.jpg|[[Measuring tapes ID:101]]
File:102.jpg|[[Rulers ID:102]]
File:103.jpg|[[Squares ID:103]]
File:104.jpg|[[Thermometer, infrared (H64) ID:104]]
</gallery>

==Miscellaneous tools==

<gallery mode="nolines" widths="160" heights="160">
File:111.jpg|[[Air compressor, 80-gallon (MAXair Premium) ID:111]]
File:112.jpg|[[Air compressor, silent ID:112]]
File:115.jpg|[[Engraver ID:115]]
File:116.jpg|[[Hand truck, red ID:116]]
File:117.jpg|[[Hot-wire foam cutter, handheld, 4.5"×5.5" (Woodland Scenics) ID:117]]
File:118.jpg|[[Hot-wire foam cutter, tabletop, 14"×12" ID:118]]
File:127.jpg|[[Oil can, blue ID:127]]
File:128.jpg|[[Painting tools ID:128]]
File:129.jpg|[[Pinball machine (Williams Road Kings) ID:129]]
File:130.jpg|[[Sandblasting cabinet, floor, blue (Powerfist) ID:130]]
File:131.jpg|[[Screwdriver magnetizer/demagnetizer (Wiha 40010) ID:131]]
File:132.jpg|[[Shop vacuum, orange ID:132]]
File:133.jpg|[[Staple gun (Arrow T-18) ID:133]]
File:122.jpg|[[Tile work surfaces ID:122]]
File:123.jpg|[[Tile work surfaces ID:123]]
File:134.jpg|[[Vacuum cart ID:134]]
File:136.jpg|[[Vacuum cleaner, portable ID:136]]
File:137.jpg|[[Vacuum pump (Edwards SpeediVac ED200) ID:137]]
File:161.jpg|[[Laminator (Scotch TL902) ID:161]]
File:166.jpg|[[Printer, 44" Large Format (HP DesignJet T1200), ID:166]]
File:169.png|[[ADS-B Base Station, FlightAware, ID:169]]
File:176.jpg|[[Vending machine, pop (Vendo 576) ID:176]]
File:177.jpg|[[Vending machine, snacks (Crane 173) ID:177]]
</gallery>

==Removed equipment==

In case they are brought back, or, so people who could have sworn we had a tool know it was removed.

<gallery style="background: darksalmon" mode="nolines">
File:6.jpg|[[Laser cutter, large (Rabbit Laser RL-80-1290) ID:6]]
File:3DP RapMan.jpg|[[3D printer (3D Systems RapMan)]]
File:3D printer, Come3D!.jpg|[[3D printer (Come3D!)]]
File:3DP Cupcake.jpg|[[3D printer (MakerBot Cupcake)]]
File:1.jpg|[[3D printer, FFF (IIIP) ID:1]]
File:3D printer, Nathan Ward's RepRap.jpg|[[3D printer, FFF (RepRap)]]
File:3D printer, Yin's Wanhao.jpg|[[3D printer, FFF (Wanhao Duplicator i3)]]
File:InVision si2.jpg|[[3D printer, MJM (3D Systems InVision si2)]]
File:NoImage.png|[[3D printer, SLA (mUVe 1) ID:5]]
File:Compressor Dewalt.jpg|[[Air compressor, 4-gallon (DeWalt)]]
File:Compressor Big.jpg|[[Air compressor, 17-gallon]]
File:110.jpg|[[Air compressor, 60-gallon (Campbell Hausfeld) ID:110]]
File:Reciprocating compressor.jpg|[[Air compressor, 80-gallon (Ingersoll Rand T30)]]
File:113.jpg|[[Air pump, foot-operated (Bell FootPumper) ID:113]]
File:Angle Grinder.jpg|[[Angle grinder (Kawasaki)]]
File:Anvil 75lb.jpg|[[Anvil]]
File:Bandsaw Horizontal.jpg|[[Bandsaw, metal, horizontal (Craftex B013N)]]
File:Bending Brake.jpg|[[Bending brake, 30" (Powerfist)]]
File:114.jpg|[[Bicycle tire jig ID:114]]
File:Buffer Benchtop.jpg|[[Buffer (Clarke 2H 5AB)]]
File:13.jpg|[[Counter (Fluke 1910A Multi-Counter) ID:13]]
File:Dewars.jpg|[[Dewars, 50-litre]]
File:Drill Dewalt.jpg|[[Drill, corded (DeWalt)]]
File:Pick N Place.jpg|[[Electronics assembly pick and place machine (Multitronics 2000LX)]]
File:Forge Propane 2.jpg|[[Forge, propane (Jim's)]]
File:43.jpg|[[Forge (Travis's) ID:43]]
File:NoImage.png|[[Forge, propane, pass-through ID:44]]
File:17.jpg|[[Function generator (Krohn–Hite 5100A) ID:17]]
File:Impact Driver.jpg|[[Impact driver (DeWalt)]]
File:7.jpg|[[Laser cutter, small ID:7]]
File:Lathe, Torrent T.72-42.jpg|[[Lathe, metal (Torrent T.72-42)]]
File:Lathe Mill.jpg|[[Lathe–mill combination (Craftex B2229)]]
File:Lathe Wood Mini.jpg|[[Lathe, wood (Haussmann)]]
File:MaxNC10.jpg|[[Milling machine, CNC, mini (MAXNC 10)]]
File:Audio mixing board.jpg|[[PA system (Dan Damron's)]]
File:22.jpg|[[Oscilloscope (Kikusui COS 5060) ID:22]]
File:50.jpg|[[Oxyacetylene torch, large ID:50]]
File:Parts washer, Powerfist 3.5 L.jpg|[[Parts washer, 3.5 L (Powerfist)]]
File:Plasma cutter.thumbnail.jpg|[[Plasma cutter, CNC (Kyle Paavola's)]]
File:Router Plunge Makita.jpg|[[Router, plunge (Makita 3612BR)]]
File:10.jpg|[[Press (Powerfist) ID:10]]
File:NoImage.png|[[Router table, wooden ID:81]]
File:87.jpg|[[87|Sander, random orbital (Skil 7492) ID:87]]
File:Chop Saw.jpg|[[Saw, compound mitre (Ryobi)]]
File:Chopsaw Metal.jpg|[[Saw, compound mitre, metal (Ryobi)]]
File:Reciprocating Saw.jpg|[[Saw, sabre (Mastercraft)]]
File:Skil Saw BD.jpg|[[Saw, handheld circular, 7 1/4" (Black & Decker)]]
File:Skil Saw Red.jpg|[[Saw, handheld circular (Skil)]]
File:90.jpg|[[Scroll saw (Mastercraft 55-6714-6) ID:90]]
File:119.jpg|[[Sewing machine, industrial (Relsew) ID:119]]
File:Shaper, metal.jpg|[[Shaper, 7"]]
File:Taps Grey.jpg|[[Tap & die set (Mastercraft)]]
File:OxyAce Mini.jpg|[[Torch, oxygen–acetylene, mini]]
File:32.jpg|[[UV photomasker (Dan's) ID:32]]
File:135.jpg|[[Vacuum pump ID:135]]
File:Vice Medium.jpg|[[Vise, medium (Irwin)]]
File:Welder MIG.jpg|[[Welder, MIG (Lincoln Weld-Pak 100)]]
File:55.jpg|[[Welder, stick, orange (Acklands 225 AC Sizzler) ID:55]]
File:109.jpg|[[Welder, Stick, AC/DC (Miller Thunderbolt XL) ID:109]]
File:74.jpg|[[Miter saw, compound, sliding (Hitachi) ID:74]]
File:142.jpg|[[Brake, shear, roller, 52" (Magnum) ID:142]]
File:146.jpg|[[Garment graphic printer, direct inject (Brother GT-361) ID:146]]
</gallery>

Tools we have

2024-03-11T02:24:17Z

Pat.spencer: Undo revision 6738 by Pat.spencer (talk)

Want to '''add a new tool'''? Follow [[Protospace Wiki:Adding new tools|this procedure]]!

We can always use new tools. Please feel free to [[contact information|contact Protospace]] to donate, arrange for pickup, or drop them off in person.

If you are interested in knowing what kind of tools we are looking for, we also have a member-managed [[Tools we want|tool wishlist]], but your best bet on figuring out if we want something is simply asking on our [https://forum.protospace.ca forum].

We also have [[:Category:Tools|an alphabetically ordered and categorized tool catalog]].

__TOC__

==Rapid prototyping tools==

{{hatnote|Comparisons: [[our 3D printers]], [[our laser cutters]]}}

<gallery mode="nolines" widths="160" heights="160">
File:2.jpg|link=2|[[3D printer, FFF (ORD Bot Hadron) ID:2]]
File:3.jpg|[[3D printer, FFF (PrusaMD) ID:3]]
File:159.jpg|[[3D printer, resin (Anycubic Photon 5.5) ID:159]]
File:170.jpg|[[3D_printer, resin (ELEGOO Saturn) ID:170]]
File:160.jpg|[[Curing station (Anycubic Wash and Cure Machine) ID:160]]
File:Thunder-51-01.jpg|link=178|[[Thunder Nova 51 Laser ID:178]]
File:107.jpg|[[Laser cutter (Trotec Speedy 300) ID:107]]
File:141.jpg|[[CNC router, mini (TD 3040) ID:141]]
File:Precix-CNC-001.jpg|[[CNC router, wood (Precix) ID:153]]
File:LongMill-on-Shelf-01.png|[[CNC router, benchtop (SIENCI LongMill) ID:143]]
</gallery>

==Automotive tools==

<gallery mode="nolines" widths="160" heights="160">
File:8.jpg|[[Floor jack, blue ID:8]]
File:9.jpg|[[Trolley jack and axle stand kit (Certified) ID:9]]
File:11.jpg|[[Socket set ID:11]]
File:162.jpeg|[[Bike stand (Feedback Sport) ID:162]]
</gallery>

==Chemistry==

<gallery mode="nolines" widths="160" heights="160">
File:12.jpg|[[Oxygen concentrator (OGSI OG-15) ID:12]]
</gallery>

==Electronics equipment==

<gallery mode="nolines" widths="160" heights="160">
File:14.jpg|[[Counter (Lafayette 54517) ID:14]]
File:15.jpg|[[Decade box, capacitance (Servomex Controls Decade Capacitor Type B) ID:15]]
File:16.jpg|[[Function generator (John's) ID:16]]
File:18.jpg|[[Heat gun (Powerfist) ID:18]]
File:19.jpg|[[Logic analyzer (HP 1631D) ID:19]]
File:20.jpg|[[Multimeter, digital (Pro.Point 8344665) ID:20]]
File:167.jpg|[[Oscilloscope (Siglent SDS1104X-E) ID:167]]
File:23.jpg|[[Oscilloscope (Tektronix 2225) ID:23]]
File:24.jpg|[[Oscilloscope (Tektronix 2465A) ID:24]]
File:25.jpg|[[Oscilloscope, PC (Syscomp DSO-101) ID:25]]
File:26.jpg|[[Power supply, bench (GQ Electronics GQ-A305D) ID:26]]
File:27.jpg|[[Power supply, bench, 500 V (Heathkit PS-3) ID:27]]
File:28.jpg|[[Power supply, bench, 2-channel (TENMA 72-7245) ID:28]]
File:30.jpg|[[Hot-air rework station (GQ Electronics 5200) ID:30]]
File:31.jpg|[[Solder fume extractor (Metcal) ID:31]]
File:33.jpg|[[Waveform generator (Syscomp WGM-101) ID:33]]
File:34.jpg|[[Waveform monitor (Tektronix 1730) ID:34]]
File:145-Welcome-Monitor.png|[[Welcome Room Monitor ID:145]]
</gallery>

==Metalworking tools==

<gallery mode="nolines" widths="160" heights="160">
File:35.jpg|[[Angle grinder (DeWalt) ID:35]]
File:37.jpg|[[Bandsaw, metal, horizontal ID:37]]
File:165.jpg|[[Bandsaw, metal, horizontal (Westward UE-712) ID:165]]
File:39.jpg|[[Bench grinder (Powerfist) ID:39]]
File:40.jpg|[[Bench grinder (Trademaster PR14210) ID:40]]
File:151.jpg|[[Brake, box and pan, 24" (Magnum) ID:151]]
File:42.jpg|[[Drill press (Mastercraft) ID:42]]
File:45.jpg|[[Foundry, propane ID:45]]
File:121.jpg|[[Hydraulic press, 50-ton, electric ID:121]]
File:46.jpg|[[Lathe, metal (Challenger 1660G) ID:46]]
File:47.jpg|[[Lathe, miniature (Taig Microlathe II) ID:47]]
File:53.jpg|[[Metal shear (Magnum) ID:53]]
File:48.jpg|[[Milling machine (ACRA AM4V) ID:48]]
File:49.jpg|[[Milling machine, CNC (Tormach PCNC 1100) ID:49]]
File:173.png|[[Plasma Cutter (Hypertherm, Powermax85) ID:173]]
File:51.jpg|[[Plasma cutter, huge (Powercut 1500) ID:51]]
File:52.jpg|[[Plasma cutter, small (Miller Spectrum 375) ID:52]]
File:54.jpg|[[Vise, giant ID:54]]
File:56.jpg|[[Welding magnets ID:56]]
File:Metalworking pattern maker's vise.jpg|[[Metalworking pattern maker's vise]]
File:Metal drill press.jpg|[[HD gear driven drill press/mill]]
File:163.jpg|[[Pipe bender (Power Fist 12 ton hydraulic) ID:163]]
</gallery>

==Woodworking and plasticworking tools==

<gallery mode="nolines" widths="160" heights="160">
File:171-Wood-Lathe-Jet.jpg|[[Wood Lathe, JET JWL-1236 ID:171]]
File:57.jpg|[[Bandsaw, green ID:57]]
File:59.jpg|[[Clamps ID:59]]
File:61.jpg|[[Drill, hand, corded, black (Jobmate) ID:61]]
File:62.jpg|[[Drill, hand, corded, dark blue (Ryobi) ID:62]]
File:67.jpg|[[Drill, hand, cordless (DeWalt) ID:67]]
File:68.jpg|[[Drill, hand, corded (Makita DP3720) ID:68]]
File:69.jpg|[[Drill press, 8" (Jobmate) ID:69]]
File:70.jpg|[[Jigsaw, corded (Black & Decker) ID:70]]
File:72.jpg|[[Jigsaw (Skil) ID:72]]
File:75.jpg|[[Nailer, pneumatic, 2-in-1 ID:75]]
File:108.jpg|[[Planer (Jet JPM-13CS) ID:108]]
File:76.jpg|[[Plate joiner (Porter Cable 557) ID:76]]
File:140.jpg|[[Pocket hole jig (Kreg K3) ID:140]]
File:78.jpg|[[Rotary tool, corded (Mastercraft) ID:78]]
File:79.jpg|[[Rotary tool, cordless (Dremel) ID:79]]
File:124.jpg|[[Router table (Jeff's) ID:124]]
File:83.jpg|[[Sander, belt (Makita 9402) ID:83]]
File:84.jpg|[[Sander, belt/disc (Dremel 730) ID:84]]
File:85.jpg|[[Sander, detail (Ryobi) ID:85]]
File:106.jpg|[[Sander, drum (General International 15-250 M1) ID:106]]
File:138.jpg|[[Sander, random orbital (Ridgid R2601) ID:138]]
File:139.jpg|[[Sander, random orbital (Ridgid R2601) ID:139]]
File:88.jpg|[[Sander, straight-line/orbital (Black & Decker Deluxe) ID:88]]
File:89.jpg|[[Scroll saw (Dremel) ID:89]]
File:91.jpg|[[Table saw (Craftex CX201) ID:91]]
File:92.jpg|[[Thickness planer (Ryobi AP1301) ID:92]]
File:93.jpg|[[Vacuum, sawdust (Craftex CX404) ID:93]]
File:NoImage.png|[[Vise, wood ID:94]]
File:95.jpg|[[Vise, wood (Travis's) ID:95]]
File:Makita cordless jigsaw.jpg|cordless Makita jig saw
File:Ridgid random orbital sander (1 of 2, unknown which one).jpg|Ridgid random orbital sander (2 of these)
File:6" jointer.jpg|6" jointer
File:DeWalt sliding compound miter saw.jpg|12" Dewalt sliding compound miter saw
File:Wood tools sharpening station.jpg|A sharpening station with a plethora of tool sharpening grinders-jigs-etc
File:149.jpg|[[Drill press, floor mounted, variable speed ID:149]]
File:164.jpg|[[Handheld metal detector ID:164]]
File:168.jpg|[[Planer, 16" Auto Planer]]
File:172.jpg|[[Table saw (SawStop) ID:172]]
File:174.jpg|[[drying rack (coyle-made) ID:174]]
</gallery>

==Textile, Vinyl, and Media tools==

<gallery mode="nolines" widths="160" heights="160">
File:120.jpg|[[Sewing machine, domestic (Singer 1802) ID:120]]
File:Singer 211G155.jpg|[[Sewing machine, industrial (Singer 211G155) ID:147]]
File:144.jpg|[[Embroidery machine, CNC (Tajima TEJT II-C NEO 1501) ID:144]]
File:150.jpg|[[Sewing/embroidery machine, computer controlled (Singer Futura CE-250) ID:150]]
File:156.jpg|[[Sewing machine, domestic (Janome HD-1000) ID:156]]
File:157.jpg|[[Serger, 4 thread (Singer 14U34B) ID:157]]
File:158.jpg|[[Serger, 4 thread, (Janome MyLock 634D) ID:158]]
File:148.jpg|[[Vinyl cutter, big (Graphtec FC8000-75) ID:148]]
File:NoImage.png|Vinyl cutter, small (Silhouette Cameo), on loan from Jamie Frost
File:154.jpg|[[Heat press, digital (Geo Knight & Co, Inc. K20S) ID:154]]
File:155.jpg|[[Heat press, auto release (Insta Graphic Systems 158) ID:155]]
File:166.jpg|[[Printer, 44" Large Format (HP DesignJet T1200), ID:166]]
</gallery>

==Measuring and inspection tools==

{{hatnote|See also: the [[#Electronics equipment|electronics equipment section on this page]] for electrical and electronic measurement and test equipment.}}

<gallery mode="nolines" widths="160" heights="160">
File:97.jpg|[[Inspection mirror, 18" gooseneck ID:97]]
File:98.jpg|[[Magnifier lamp, large, with lid ID:98]]
File:99.jpg|[[Magnifier lamp, large, without lid ID:99]]
File:100.jpg|[[Magnifier lamp, small, with lid ID:100]]
File:101.jpg|[[Measuring tapes ID:101]]
File:102.jpg|[[Rulers ID:102]]
File:103.jpg|[[Squares ID:103]]
File:104.jpg|[[Thermometer, infrared (H64) ID:104]]
</gallery>

==Miscellaneous tools==

<gallery mode="nolines" widths="160" heights="160">
File:111.jpg|[[Air compressor, 80-gallon (MAXair Premium) ID:111]]
File:112.jpg|[[Air compressor, silent ID:112]]
File:115.jpg|[[Engraver ID:115]]
File:116.jpg|[[Hand truck, red ID:116]]
File:117.jpg|[[Hot-wire foam cutter, handheld, 4.5"×5.5" (Woodland Scenics) ID:117]]
File:118.jpg|[[Hot-wire foam cutter, tabletop, 14"×12" ID:118]]
File:127.jpg|[[Oil can, blue ID:127]]
File:128.jpg|[[Painting tools ID:128]]
File:129.jpg|[[Pinball machine (Williams Road Kings) ID:129]]
File:130.jpg|[[Sandblasting cabinet, floor, blue (Powerfist) ID:130]]
File:131.jpg|[[Screwdriver magnetizer/demagnetizer (Wiha 40010) ID:131]]
File:132.jpg|[[Shop vacuum, orange ID:132]]
File:133.jpg|[[Staple gun (Arrow T-18) ID:133]]
File:122.jpg|[[Tile work surfaces ID:122]]
File:123.jpg|[[Tile work surfaces ID:123]]
File:134.jpg|[[Vacuum cart ID:134]]
File:136.jpg|[[Vacuum cleaner, portable ID:136]]
File:137.jpg|[[Vacuum pump (Edwards SpeediVac ED200) ID:137]]
File:161.jpg|[[Laminator (Scotch TL902) ID:161]]
File:166.jpg|[[Printer, 44" Large Format (HP DesignJet T1200), ID:166]]
File:169.png|[[ADS-B Base Station, FlightAware, ID:169]]
File:176.jpg|[[Vending machine, pop (Vendo 576) ID:176]]
File:177.jpg|[[Vending machine, snacks (Crane 173) ID:177]]
</gallery>

==Removed equipment==

In case they are brought back, or, so people who could have sworn we had a tool know it was removed.

<gallery style="background: darksalmon" mode="nolines">
File:6.jpg|[[Laser cutter, large (Rabbit Laser RL-80-1290) ID:6]]
File:3DP RapMan.jpg|[[3D printer (3D Systems RapMan)]]
File:3D printer, Come3D!.jpg|[[3D printer (Come3D!)]]
File:3DP Cupcake.jpg|[[3D printer (MakerBot Cupcake)]]
File:1.jpg|[[3D printer, FFF (IIIP) ID:1]]
File:3D printer, Nathan Ward's RepRap.jpg|[[3D printer, FFF (RepRap)]]
File:3D printer, Yin's Wanhao.jpg|[[3D printer, FFF (Wanhao Duplicator i3)]]
File:InVision si2.jpg|[[3D printer, MJM (3D Systems InVision si2)]]
File:NoImage.png|[[3D printer, SLA (mUVe 1) ID:5]]
File:Compressor Dewalt.jpg|[[Air compressor, 4-gallon (DeWalt)]]
File:Compressor Big.jpg|[[Air compressor, 17-gallon]]
File:110.jpg|[[Air compressor, 60-gallon (Campbell Hausfeld) ID:110]]
File:Reciprocating compressor.jpg|[[Air compressor, 80-gallon (Ingersoll Rand T30)]]
File:113.jpg|[[Air pump, foot-operated (Bell FootPumper) ID:113]]
File:Angle Grinder.jpg|[[Angle grinder (Kawasaki)]]
File:Anvil 75lb.jpg|[[Anvil]]
File:Bandsaw Horizontal.jpg|[[Bandsaw, metal, horizontal (Craftex B013N)]]
File:Bending Brake.jpg|[[Bending brake, 30" (Powerfist)]]
File:114.jpg|[[Bicycle tire jig ID:114]]
File:Buffer Benchtop.jpg|[[Buffer (Clarke 2H 5AB)]]
File:13.jpg|[[Counter (Fluke 1910A Multi-Counter) ID:13]]
File:Dewars.jpg|[[Dewars, 50-litre]]
File:Drill Dewalt.jpg|[[Drill, corded (DeWalt)]]
File:Pick N Place.jpg|[[Electronics assembly pick and place machine (Multitronics 2000LX)]]
File:Forge Propane 2.jpg|[[Forge, propane (Jim's)]]
File:43.jpg|[[Forge (Travis's) ID:43]]
File:NoImage.png|[[Forge, propane, pass-through ID:44]]
File:17.jpg|[[Function generator (Krohn–Hite 5100A) ID:17]]
File:Impact Driver.jpg|[[Impact driver (DeWalt)]]
File:7.jpg|[[Laser cutter, small ID:7]]
File:Lathe, Torrent T.72-42.jpg|[[Lathe, metal (Torrent T.72-42)]]
File:Lathe Mill.jpg|[[Lathe–mill combination (Craftex B2229)]]
File:Lathe Wood Mini.jpg|[[Lathe, wood (Haussmann)]]
File:MaxNC10.jpg|[[Milling machine, CNC, mini (MAXNC 10)]]
File:Audio mixing board.jpg|[[PA system (Dan Damron's)]]
File:22.jpg|[[Oscilloscope (Kikusui COS 5060) ID:22]]
File:50.jpg|[[Oxyacetylene torch, large ID:50]]
File:Parts washer, Powerfist 3.5 L.jpg|[[Parts washer, 3.5 L (Powerfist)]]
File:Plasma cutter.thumbnail.jpg|[[Plasma cutter, CNC (Kyle Paavola's)]]
File:Router Plunge Makita.jpg|[[Router, plunge (Makita 3612BR)]]
File:10.jpg|[[Press (Powerfist) ID:10]]
File:NoImage.png|[[Router table, wooden ID:81]]
File:87.jpg|[[87|Sander, random orbital (Skil 7492) ID:87]]
File:Chop Saw.jpg|[[Saw, compound mitre (Ryobi)]]
File:Chopsaw Metal.jpg|[[Saw, compound mitre, metal (Ryobi)]]
File:Reciprocating Saw.jpg|[[Saw, sabre (Mastercraft)]]
File:Skil Saw BD.jpg|[[Saw, handheld circular, 7 1/4" (Black & Decker)]]
File:Skil Saw Red.jpg|[[Saw, handheld circular (Skil)]]
File:90.jpg|[[Scroll saw (Mastercraft 55-6714-6) ID:90]]
File:119.jpg|[[Sewing machine, industrial (Relsew) ID:119]]
File:Shaper, metal.jpg|[[Shaper, 7"]]
File:Taps Grey.jpg|[[Tap & die set (Mastercraft)]]
File:OxyAce Mini.jpg|[[Torch, oxygen–acetylene, mini]]
File:32.jpg|[[UV photomasker (Dan's) ID:32]]
File:135.jpg|[[Vacuum pump ID:135]]
File:Vice Medium.jpg|[[Vise, medium (Irwin)]]
File:Welder MIG.jpg|[[Welder, MIG (Lincoln Weld-Pak 100)]]
File:55.jpg|[[Welder, stick, orange (Acklands 225 AC Sizzler) ID:55]]
File:109.jpg|[[Welder, Stick, AC/DC (Miller Thunderbolt XL) ID:109]]
File:74.jpg|[[Miter saw, compound, sliding (Hitachi) ID:74]]
File:142.jpg|[[Brake, shear, roller, 52" (Magnum) ID:142]]
File:146.jpg|[[Garment graphic printer, direct inject (Brother GT-361) ID:146]]
</gallery>

Tools we have

2024-03-11T02:22:35Z

Pat.spencer: /* Rapid prototyping tools */

Want to '''add a new tool'''? Follow [[Protospace Wiki:Adding new tools|this procedure]]!

We can always use new tools. Please feel free to [[contact information|contact Protospace]] to donate, arrange for pickup, or drop them off in person.

If you are interested in knowing what kind of tools we are looking for, we also have a member-managed [[Tools we want|tool wishlist]], but your best bet on figuring out if we want something is simply asking on our [https://forum.protospace.ca forum].

We also have [[:Category:Tools|an alphabetically ordered and categorized tool catalog]].

__TOC__

==Rapid prototyping tools==

{{hatnote|Comparisons: [[our 3D printers]], [[our laser cutters]]}}

<gallery mode="nolines" widths="160" heights="160">
File:2.jpg|[[3D printer, FFF (ORD Bot Hadron) ID:2]]
File:3.jpg|[[3D printer, FFF (PrusaMD) ID:3]]
File:159.jpg|[[3D printer, resin (Anycubic Photon 5.5) ID:159]]
File:170.jpg|[[3D_printer, resin (ELEGOO Saturn) ID:170]]
File:160.jpg|[[Curing station (Anycubic Wash and Cure Machine) ID:160]]
File:Thunder-51-01.jpg|[[Thunder Nova 51 Laser ID:178]]
File:107.jpg|[[Laser cutter (Trotec Speedy 300) ID:107]]
File:141.jpg|[[CNC router, mini (TD 3040) ID:141]]
File:Precix-CNC-001.jpg|[[CNC router, wood (Precix) ID:153]]
File:LongMill-on-Shelf-01.png|[[CNC router, benchtop (SIENCI LongMill) ID:143]]
</gallery>

==Automotive tools==

<gallery mode="nolines" widths="160" heights="160">
File:8.jpg|[[Floor jack, blue ID:8]]
File:9.jpg|[[Trolley jack and axle stand kit (Certified) ID:9]]
File:11.jpg|[[Socket set ID:11]]
File:162.jpeg|[[Bike stand (Feedback Sport) ID:162]]
</gallery>

==Chemistry==

<gallery mode="nolines" widths="160" heights="160">
File:12.jpg|[[Oxygen concentrator (OGSI OG-15) ID:12]]
</gallery>

==Electronics equipment==

<gallery mode="nolines" widths="160" heights="160">
File:14.jpg|[[Counter (Lafayette 54517) ID:14]]
File:15.jpg|[[Decade box, capacitance (Servomex Controls Decade Capacitor Type B) ID:15]]
File:16.jpg|[[Function generator (John's) ID:16]]
File:18.jpg|[[Heat gun (Powerfist) ID:18]]
File:19.jpg|[[Logic analyzer (HP 1631D) ID:19]]
File:20.jpg|[[Multimeter, digital (Pro.Point 8344665) ID:20]]
File:167.jpg|[[Oscilloscope (Siglent SDS1104X-E) ID:167]]
File:23.jpg|[[Oscilloscope (Tektronix 2225) ID:23]]
File:24.jpg|[[Oscilloscope (Tektronix 2465A) ID:24]]
File:25.jpg|[[Oscilloscope, PC (Syscomp DSO-101) ID:25]]
File:26.jpg|[[Power supply, bench (GQ Electronics GQ-A305D) ID:26]]
File:27.jpg|[[Power supply, bench, 500 V (Heathkit PS-3) ID:27]]
File:28.jpg|[[Power supply, bench, 2-channel (TENMA 72-7245) ID:28]]
File:30.jpg|[[Hot-air rework station (GQ Electronics 5200) ID:30]]
File:31.jpg|[[Solder fume extractor (Metcal) ID:31]]
File:33.jpg|[[Waveform generator (Syscomp WGM-101) ID:33]]
File:34.jpg|[[Waveform monitor (Tektronix 1730) ID:34]]
File:145-Welcome-Monitor.png|[[Welcome Room Monitor ID:145]]
</gallery>

==Metalworking tools==

<gallery mode="nolines" widths="160" heights="160">
File:35.jpg|[[Angle grinder (DeWalt) ID:35]]
File:37.jpg|[[Bandsaw, metal, horizontal ID:37]]
File:165.jpg|[[Bandsaw, metal, horizontal (Westward UE-712) ID:165]]
File:39.jpg|[[Bench grinder (Powerfist) ID:39]]
File:40.jpg|[[Bench grinder (Trademaster PR14210) ID:40]]
File:151.jpg|[[Brake, box and pan, 24" (Magnum) ID:151]]
File:42.jpg|[[Drill press (Mastercraft) ID:42]]
File:45.jpg|[[Foundry, propane ID:45]]
File:121.jpg|[[Hydraulic press, 50-ton, electric ID:121]]
File:46.jpg|[[Lathe, metal (Challenger 1660G) ID:46]]
File:47.jpg|[[Lathe, miniature (Taig Microlathe II) ID:47]]
File:53.jpg|[[Metal shear (Magnum) ID:53]]
File:48.jpg|[[Milling machine (ACRA AM4V) ID:48]]
File:49.jpg|[[Milling machine, CNC (Tormach PCNC 1100) ID:49]]
File:173.png|[[Plasma Cutter (Hypertherm, Powermax85) ID:173]]
File:51.jpg|[[Plasma cutter, huge (Powercut 1500) ID:51]]
File:52.jpg|[[Plasma cutter, small (Miller Spectrum 375) ID:52]]
File:54.jpg|[[Vise, giant ID:54]]
File:56.jpg|[[Welding magnets ID:56]]
File:Metalworking pattern maker's vise.jpg|[[Metalworking pattern maker's vise]]
File:Metal drill press.jpg|[[HD gear driven drill press/mill]]
File:163.jpg|[[Pipe bender (Power Fist 12 ton hydraulic) ID:163]]
</gallery>

==Woodworking and plasticworking tools==

<gallery mode="nolines" widths="160" heights="160">
File:171-Wood-Lathe-Jet.jpg|[[Wood Lathe, JET JWL-1236 ID:171]]
File:57.jpg|[[Bandsaw, green ID:57]]
File:59.jpg|[[Clamps ID:59]]
File:61.jpg|[[Drill, hand, corded, black (Jobmate) ID:61]]
File:62.jpg|[[Drill, hand, corded, dark blue (Ryobi) ID:62]]
File:67.jpg|[[Drill, hand, cordless (DeWalt) ID:67]]
File:68.jpg|[[Drill, hand, corded (Makita DP3720) ID:68]]
File:69.jpg|[[Drill press, 8" (Jobmate) ID:69]]
File:70.jpg|[[Jigsaw, corded (Black & Decker) ID:70]]
File:72.jpg|[[Jigsaw (Skil) ID:72]]
File:75.jpg|[[Nailer, pneumatic, 2-in-1 ID:75]]
File:108.jpg|[[Planer (Jet JPM-13CS) ID:108]]
File:76.jpg|[[Plate joiner (Porter Cable 557) ID:76]]
File:140.jpg|[[Pocket hole jig (Kreg K3) ID:140]]
File:78.jpg|[[Rotary tool, corded (Mastercraft) ID:78]]
File:79.jpg|[[Rotary tool, cordless (Dremel) ID:79]]
File:124.jpg|[[Router table (Jeff's) ID:124]]
File:83.jpg|[[Sander, belt (Makita 9402) ID:83]]
File:84.jpg|[[Sander, belt/disc (Dremel 730) ID:84]]
File:85.jpg|[[Sander, detail (Ryobi) ID:85]]
File:106.jpg|[[Sander, drum (General International 15-250 M1) ID:106]]
File:138.jpg|[[Sander, random orbital (Ridgid R2601) ID:138]]
File:139.jpg|[[Sander, random orbital (Ridgid R2601) ID:139]]
File:88.jpg|[[Sander, straight-line/orbital (Black & Decker Deluxe) ID:88]]
File:89.jpg|[[Scroll saw (Dremel) ID:89]]
File:91.jpg|[[Table saw (Craftex CX201) ID:91]]
File:92.jpg|[[Thickness planer (Ryobi AP1301) ID:92]]
File:93.jpg|[[Vacuum, sawdust (Craftex CX404) ID:93]]
File:NoImage.png|[[Vise, wood ID:94]]
File:95.jpg|[[Vise, wood (Travis's) ID:95]]
File:Makita cordless jigsaw.jpg|cordless Makita jig saw
File:Ridgid random orbital sander (1 of 2, unknown which one).jpg|Ridgid random orbital sander (2 of these)
File:6" jointer.jpg|6" jointer
File:DeWalt sliding compound miter saw.jpg|12" Dewalt sliding compound miter saw
File:Wood tools sharpening station.jpg|A sharpening station with a plethora of tool sharpening grinders-jigs-etc
File:149.jpg|[[Drill press, floor mounted, variable speed ID:149]]
File:164.jpg|[[Handheld metal detector ID:164]]
File:168.jpg|[[Planer, 16" Auto Planer]]
File:172.jpg|[[Table saw (SawStop) ID:172]]
File:174.jpg|[[drying rack (coyle-made) ID:174]]
</gallery>

==Textile, Vinyl, and Media tools==

<gallery mode="nolines" widths="160" heights="160">
File:120.jpg|[[Sewing machine, domestic (Singer 1802) ID:120]]
File:Singer 211G155.jpg|[[Sewing machine, industrial (Singer 211G155) ID:147]]
File:144.jpg|[[Embroidery machine, CNC (Tajima TEJT II-C NEO 1501) ID:144]]
File:150.jpg|[[Sewing/embroidery machine, computer controlled (Singer Futura CE-250) ID:150]]
File:156.jpg|[[Sewing machine, domestic (Janome HD-1000) ID:156]]
File:157.jpg|[[Serger, 4 thread (Singer 14U34B) ID:157]]
File:158.jpg|[[Serger, 4 thread, (Janome MyLock 634D) ID:158]]
File:148.jpg|[[Vinyl cutter, big (Graphtec FC8000-75) ID:148]]
File:NoImage.png|Vinyl cutter, small (Silhouette Cameo), on loan from Jamie Frost
File:154.jpg|[[Heat press, digital (Geo Knight & Co, Inc. K20S) ID:154]]
File:155.jpg|[[Heat press, auto release (Insta Graphic Systems 158) ID:155]]
File:166.jpg|[[Printer, 44" Large Format (HP DesignJet T1200), ID:166]]
</gallery>

==Measuring and inspection tools==

{{hatnote|See also: the [[#Electronics equipment|electronics equipment section on this page]] for electrical and electronic measurement and test equipment.}}

<gallery mode="nolines" widths="160" heights="160">
File:97.jpg|[[Inspection mirror, 18" gooseneck ID:97]]
File:98.jpg|[[Magnifier lamp, large, with lid ID:98]]
File:99.jpg|[[Magnifier lamp, large, without lid ID:99]]
File:100.jpg|[[Magnifier lamp, small, with lid ID:100]]
File:101.jpg|[[Measuring tapes ID:101]]
File:102.jpg|[[Rulers ID:102]]
File:103.jpg|[[Squares ID:103]]
File:104.jpg|[[Thermometer, infrared (H64) ID:104]]
</gallery>

==Miscellaneous tools==

<gallery mode="nolines" widths="160" heights="160">
File:111.jpg|[[Air compressor, 80-gallon (MAXair Premium) ID:111]]
File:112.jpg|[[Air compressor, silent ID:112]]
File:115.jpg|[[Engraver ID:115]]
File:116.jpg|[[Hand truck, red ID:116]]
File:117.jpg|[[Hot-wire foam cutter, handheld, 4.5"×5.5" (Woodland Scenics) ID:117]]
File:118.jpg|[[Hot-wire foam cutter, tabletop, 14"×12" ID:118]]
File:127.jpg|[[Oil can, blue ID:127]]
File:128.jpg|[[Painting tools ID:128]]
File:129.jpg|[[Pinball machine (Williams Road Kings) ID:129]]
File:130.jpg|[[Sandblasting cabinet, floor, blue (Powerfist) ID:130]]
File:131.jpg|[[Screwdriver magnetizer/demagnetizer (Wiha 40010) ID:131]]
File:132.jpg|[[Shop vacuum, orange ID:132]]
File:133.jpg|[[Staple gun (Arrow T-18) ID:133]]
File:122.jpg|[[Tile work surfaces ID:122]]
File:123.jpg|[[Tile work surfaces ID:123]]
File:134.jpg|[[Vacuum cart ID:134]]
File:136.jpg|[[Vacuum cleaner, portable ID:136]]
File:137.jpg|[[Vacuum pump (Edwards SpeediVac ED200) ID:137]]
File:161.jpg|[[Laminator (Scotch TL902) ID:161]]
File:166.jpg|[[Printer, 44" Large Format (HP DesignJet T1200), ID:166]]
File:169.png|[[ADS-B Base Station, FlightAware, ID:169]]
File:176.jpg|[[Vending machine, pop (Vendo 576) ID:176]]
File:177.jpg|[[Vending machine, snacks (Crane 173) ID:177]]
</gallery>

==Removed equipment==

In case they are brought back, or, so people who could have sworn we had a tool know it was removed.

<gallery style="background: darksalmon" mode="nolines">
File:6.jpg|[[Laser cutter, large (Rabbit Laser RL-80-1290) ID:6]]
File:3DP RapMan.jpg|[[3D printer (3D Systems RapMan)]]
File:3D printer, Come3D!.jpg|[[3D printer (Come3D!)]]
File:3DP Cupcake.jpg|[[3D printer (MakerBot Cupcake)]]
File:1.jpg|[[3D printer, FFF (IIIP) ID:1]]
File:3D printer, Nathan Ward's RepRap.jpg|[[3D printer, FFF (RepRap)]]
File:3D printer, Yin's Wanhao.jpg|[[3D printer, FFF (Wanhao Duplicator i3)]]
File:InVision si2.jpg|[[3D printer, MJM (3D Systems InVision si2)]]
File:NoImage.png|[[3D printer, SLA (mUVe 1) ID:5]]
File:Compressor Dewalt.jpg|[[Air compressor, 4-gallon (DeWalt)]]
File:Compressor Big.jpg|[[Air compressor, 17-gallon]]
File:110.jpg|[[Air compressor, 60-gallon (Campbell Hausfeld) ID:110]]
File:Reciprocating compressor.jpg|[[Air compressor, 80-gallon (Ingersoll Rand T30)]]
File:113.jpg|[[Air pump, foot-operated (Bell FootPumper) ID:113]]
File:Angle Grinder.jpg|[[Angle grinder (Kawasaki)]]
File:Anvil 75lb.jpg|[[Anvil]]
File:Bandsaw Horizontal.jpg|[[Bandsaw, metal, horizontal (Craftex B013N)]]
File:Bending Brake.jpg|[[Bending brake, 30" (Powerfist)]]
File:114.jpg|[[Bicycle tire jig ID:114]]
File:Buffer Benchtop.jpg|[[Buffer (Clarke 2H 5AB)]]
File:13.jpg|[[Counter (Fluke 1910A Multi-Counter) ID:13]]
File:Dewars.jpg|[[Dewars, 50-litre]]
File:Drill Dewalt.jpg|[[Drill, corded (DeWalt)]]
File:Pick N Place.jpg|[[Electronics assembly pick and place machine (Multitronics 2000LX)]]
File:Forge Propane 2.jpg|[[Forge, propane (Jim's)]]
File:43.jpg|[[Forge (Travis's) ID:43]]
File:NoImage.png|[[Forge, propane, pass-through ID:44]]
File:17.jpg|[[Function generator (Krohn–Hite 5100A) ID:17]]
File:Impact Driver.jpg|[[Impact driver (DeWalt)]]
File:7.jpg|[[Laser cutter, small ID:7]]
File:Lathe, Torrent T.72-42.jpg|[[Lathe, metal (Torrent T.72-42)]]
File:Lathe Mill.jpg|[[Lathe–mill combination (Craftex B2229)]]
File:Lathe Wood Mini.jpg|[[Lathe, wood (Haussmann)]]
File:MaxNC10.jpg|[[Milling machine, CNC, mini (MAXNC 10)]]
File:Audio mixing board.jpg|[[PA system (Dan Damron's)]]
File:22.jpg|[[Oscilloscope (Kikusui COS 5060) ID:22]]
File:50.jpg|[[Oxyacetylene torch, large ID:50]]
File:Parts washer, Powerfist 3.5 L.jpg|[[Parts washer, 3.5 L (Powerfist)]]
File:Plasma cutter.thumbnail.jpg|[[Plasma cutter, CNC (Kyle Paavola's)]]
File:Router Plunge Makita.jpg|[[Router, plunge (Makita 3612BR)]]
File:10.jpg|[[Press (Powerfist) ID:10]]
File:NoImage.png|[[Router table, wooden ID:81]]
File:87.jpg|[[87|Sander, random orbital (Skil 7492) ID:87]]
File:Chop Saw.jpg|[[Saw, compound mitre (Ryobi)]]
File:Chopsaw Metal.jpg|[[Saw, compound mitre, metal (Ryobi)]]
File:Reciprocating Saw.jpg|[[Saw, sabre (Mastercraft)]]
File:Skil Saw BD.jpg|[[Saw, handheld circular, 7 1/4" (Black & Decker)]]
File:Skil Saw Red.jpg|[[Saw, handheld circular (Skil)]]
File:90.jpg|[[Scroll saw (Mastercraft 55-6714-6) ID:90]]
File:119.jpg|[[Sewing machine, industrial (Relsew) ID:119]]
File:Shaper, metal.jpg|[[Shaper, 7"]]
File:Taps Grey.jpg|[[Tap & die set (Mastercraft)]]
File:OxyAce Mini.jpg|[[Torch, oxygen–acetylene, mini]]
File:32.jpg|[[UV photomasker (Dan's) ID:32]]
File:135.jpg|[[Vacuum pump ID:135]]
File:Vice Medium.jpg|[[Vise, medium (Irwin)]]
File:Welder MIG.jpg|[[Welder, MIG (Lincoln Weld-Pak 100)]]
File:55.jpg|[[Welder, stick, orange (Acklands 225 AC Sizzler) ID:55]]
File:109.jpg|[[Welder, Stick, AC/DC (Miller Thunderbolt XL) ID:109]]
File:74.jpg|[[Miter saw, compound, sliding (Hitachi) ID:74]]
File:142.jpg|[[Brake, shear, roller, 52" (Magnum) ID:142]]
File:146.jpg|[[Garment graphic printer, direct inject (Brother GT-361) ID:146]]
</gallery>

Laser Cutter, Thunder Nova 51 ID:178

2024-03-11T02:20:54Z

Pat.spencer: Added setting focus height

{{Equipment page
| toolname = Thunder Nova 51 Laser
| model = Nova 51
| serial = ?
| owner = ProtoSpace
| loanstatus = N/A
| arrived = ?
| location = ?
| status = ?
| permission = ?
| certification = ?
| photo = Thunder-51-01.jpg
| caption =
| id =
}}

==Specs==
TBD

==Usage==

=== Setting Focus Height ===
[[File:Thunder-Laser-Focus.jpeg]] 

==Troubleshooting==
TBD

==Documentation==
TBD

File:Thunder-Laser-Focus.jpeg

2024-03-11T02:17:31Z

Pat.spencer: Copied from Forum

== Summary ==
Copied from Forum

178

2024-03-09T19:22:14Z

Pat.spencer: Changed redirect target from Thunder Nova 51 Laser to Thunder Nova 51 Laser ID:178

#REDIRECT [[Thunder Nova 51 Laser ID:178]]{{id/after-redirect}}

Tools we have

2024-03-09T19:19:26Z

Pat.spencer: /* Rapid prototyping tools */

Want to '''add a new tool'''? Follow [[Protospace Wiki:Adding new tools|this procedure]]!

We can always use new tools. Please feel free to [[contact information|contact Protospace]] to donate, arrange for pickup, or drop them off in person.

If you are interested in knowing what kind of tools we are looking for, we also have a member-managed [[Tools we want|tool wishlist]], but your best bet on figuring out if we want something is simply asking on our [https://forum.protospace.ca forum].

We also have [[:Category:Tools|an alphabetically ordered and categorized tool catalog]].

__TOC__

==Rapid prototyping tools==

{{hatnote|Comparisons: [[our 3D printers]], [[our laser cutters]]}}

<gallery mode="nolines" widths="160" heights="160">
File:2.jpg|link=2|[[3D printer, FFF (ORD Bot Hadron) ID:2]]
File:3.jpg|[[3D printer, FFF (PrusaMD) ID:3]]
File:159.jpg|[[3D printer, resin (Anycubic Photon 5.5) ID:159]]
File:170.jpg|[[3D_printer, resin (ELEGOO Saturn) ID:170]]
File:160.jpg|[[Curing station (Anycubic Wash and Cure Machine) ID:160]]
File:Thunder-51-01.jpg|link=178|[[Thunder Nova 51 Laser ID:178]]
File:107.jpg|[[Laser cutter (Trotec Speedy 300) ID:107]]
File:141.jpg|[[CNC router, mini (TD 3040) ID:141]]
File:Precix-CNC-001.jpg|[[CNC router, wood (Precix) ID:153]]
File:LongMill-on-Shelf-01.png|[[CNC router, benchtop (SIENCI LongMill) ID:143]]
</gallery>

==Automotive tools==

<gallery mode="nolines" widths="160" heights="160">
File:8.jpg|[[Floor jack, blue ID:8]]
File:9.jpg|[[Trolley jack and axle stand kit (Certified) ID:9]]
File:11.jpg|[[Socket set ID:11]]
File:162.jpeg|[[Bike stand (Feedback Sport) ID:162]]
</gallery>

==Chemistry==

<gallery mode="nolines" widths="160" heights="160">
File:12.jpg|[[Oxygen concentrator (OGSI OG-15) ID:12]]
</gallery>

==Electronics equipment==

<gallery mode="nolines" widths="160" heights="160">
File:14.jpg|[[Counter (Lafayette 54517) ID:14]]
File:15.jpg|[[Decade box, capacitance (Servomex Controls Decade Capacitor Type B) ID:15]]
File:16.jpg|[[Function generator (John's) ID:16]]
File:18.jpg|[[Heat gun (Powerfist) ID:18]]
File:19.jpg|[[Logic analyzer (HP 1631D) ID:19]]
File:20.jpg|[[Multimeter, digital (Pro.Point 8344665) ID:20]]
File:167.jpg|[[Oscilloscope (Siglent SDS1104X-E) ID:167]]
File:23.jpg|[[Oscilloscope (Tektronix 2225) ID:23]]
File:24.jpg|[[Oscilloscope (Tektronix 2465A) ID:24]]
File:25.jpg|[[Oscilloscope, PC (Syscomp DSO-101) ID:25]]
File:26.jpg|[[Power supply, bench (GQ Electronics GQ-A305D) ID:26]]
File:27.jpg|[[Power supply, bench, 500 V (Heathkit PS-3) ID:27]]
File:28.jpg|[[Power supply, bench, 2-channel (TENMA 72-7245) ID:28]]
File:30.jpg|[[Hot-air rework station (GQ Electronics 5200) ID:30]]
File:31.jpg|[[Solder fume extractor (Metcal) ID:31]]
File:33.jpg|[[Waveform generator (Syscomp WGM-101) ID:33]]
File:34.jpg|[[Waveform monitor (Tektronix 1730) ID:34]]
File:145-Welcome-Monitor.png|[[Welcome Room Monitor ID:145]]
</gallery>

==Metalworking tools==

<gallery mode="nolines" widths="160" heights="160">
File:35.jpg|[[Angle grinder (DeWalt) ID:35]]
File:37.jpg|[[Bandsaw, metal, horizontal ID:37]]
File:165.jpg|[[Bandsaw, metal, horizontal (Westward UE-712) ID:165]]
File:39.jpg|[[Bench grinder (Powerfist) ID:39]]
File:40.jpg|[[Bench grinder (Trademaster PR14210) ID:40]]
File:151.jpg|[[Brake, box and pan, 24" (Magnum) ID:151]]
File:42.jpg|[[Drill press (Mastercraft) ID:42]]
File:45.jpg|[[Foundry, propane ID:45]]
File:121.jpg|[[Hydraulic press, 50-ton, electric ID:121]]
File:46.jpg|[[Lathe, metal (Challenger 1660G) ID:46]]
File:47.jpg|[[Lathe, miniature (Taig Microlathe II) ID:47]]
File:53.jpg|[[Metal shear (Magnum) ID:53]]
File:48.jpg|[[Milling machine (ACRA AM4V) ID:48]]
File:49.jpg|[[Milling machine, CNC (Tormach PCNC 1100) ID:49]]
File:173.png|[[Plasma Cutter (Hypertherm, Powermax85) ID:173]]
File:51.jpg|[[Plasma cutter, huge (Powercut 1500) ID:51]]
File:52.jpg|[[Plasma cutter, small (Miller Spectrum 375) ID:52]]
File:54.jpg|[[Vise, giant ID:54]]
File:56.jpg|[[Welding magnets ID:56]]
File:Metalworking pattern maker's vise.jpg|[[Metalworking pattern maker's vise]]
File:Metal drill press.jpg|[[HD gear driven drill press/mill]]
File:163.jpg|[[Pipe bender (Power Fist 12 ton hydraulic) ID:163]]
</gallery>

==Woodworking and plasticworking tools==

<gallery mode="nolines" widths="160" heights="160">
File:171-Wood-Lathe-Jet.jpg|[[Wood Lathe, JET JWL-1236 ID:171]]
File:57.jpg|[[Bandsaw, green ID:57]]
File:59.jpg|[[Clamps ID:59]]
File:61.jpg|[[Drill, hand, corded, black (Jobmate) ID:61]]
File:62.jpg|[[Drill, hand, corded, dark blue (Ryobi) ID:62]]
File:67.jpg|[[Drill, hand, cordless (DeWalt) ID:67]]
File:68.jpg|[[Drill, hand, corded (Makita DP3720) ID:68]]
File:69.jpg|[[Drill press, 8" (Jobmate) ID:69]]
File:70.jpg|[[Jigsaw, corded (Black & Decker) ID:70]]
File:72.jpg|[[Jigsaw (Skil) ID:72]]
File:75.jpg|[[Nailer, pneumatic, 2-in-1 ID:75]]
File:108.jpg|[[Planer (Jet JPM-13CS) ID:108]]
File:76.jpg|[[Plate joiner (Porter Cable 557) ID:76]]
File:140.jpg|[[Pocket hole jig (Kreg K3) ID:140]]
File:78.jpg|[[Rotary tool, corded (Mastercraft) ID:78]]
File:79.jpg|[[Rotary tool, cordless (Dremel) ID:79]]
File:124.jpg|[[Router table (Jeff's) ID:124]]
File:83.jpg|[[Sander, belt (Makita 9402) ID:83]]
File:84.jpg|[[Sander, belt/disc (Dremel 730) ID:84]]
File:85.jpg|[[Sander, detail (Ryobi) ID:85]]
File:106.jpg|[[Sander, drum (General International 15-250 M1) ID:106]]
File:138.jpg|[[Sander, random orbital (Ridgid R2601) ID:138]]
File:139.jpg|[[Sander, random orbital (Ridgid R2601) ID:139]]
File:88.jpg|[[Sander, straight-line/orbital (Black & Decker Deluxe) ID:88]]
File:89.jpg|[[Scroll saw (Dremel) ID:89]]
File:91.jpg|[[Table saw (Craftex CX201) ID:91]]
File:92.jpg|[[Thickness planer (Ryobi AP1301) ID:92]]
File:93.jpg|[[Vacuum, sawdust (Craftex CX404) ID:93]]
File:NoImage.png|[[Vise, wood ID:94]]
File:95.jpg|[[Vise, wood (Travis's) ID:95]]
File:Makita cordless jigsaw.jpg|cordless Makita jig saw
File:Ridgid random orbital sander (1 of 2, unknown which one).jpg|Ridgid random orbital sander (2 of these)
File:6" jointer.jpg|6" jointer
File:DeWalt sliding compound miter saw.jpg|12" Dewalt sliding compound miter saw
File:Wood tools sharpening station.jpg|A sharpening station with a plethora of tool sharpening grinders-jigs-etc
File:149.jpg|[[Drill press, floor mounted, variable speed ID:149]]
File:164.jpg|[[Handheld metal detector ID:164]]
File:168.jpg|[[Planer, 16" Auto Planer]]
File:172.jpg|[[Table saw (SawStop) ID:172]]
File:174.jpg|[[drying rack (coyle-made) ID:174]]
</gallery>

==Textile, Vinyl, and Media tools==

<gallery mode="nolines" widths="160" heights="160">
File:120.jpg|[[Sewing machine, domestic (Singer 1802) ID:120]]
File:Singer 211G155.jpg|[[Sewing machine, industrial (Singer 211G155) ID:147]]
File:144.jpg|[[Embroidery machine, CNC (Tajima TEJT II-C NEO 1501) ID:144]]
File:150.jpg|[[Sewing/embroidery machine, computer controlled (Singer Futura CE-250) ID:150]]
File:156.jpg|[[Sewing machine, domestic (Janome HD-1000) ID:156]]
File:157.jpg|[[Serger, 4 thread (Singer 14U34B) ID:157]]
File:158.jpg|[[Serger, 4 thread, (Janome MyLock 634D) ID:158]]
File:148.jpg|[[Vinyl cutter, big (Graphtec FC8000-75) ID:148]]
File:NoImage.png|Vinyl cutter, small (Silhouette Cameo), on loan from Jamie Frost
File:154.jpg|[[Heat press, digital (Geo Knight & Co, Inc. K20S) ID:154]]
File:155.jpg|[[Heat press, auto release (Insta Graphic Systems 158) ID:155]]
File:166.jpg|[[Printer, 44" Large Format (HP DesignJet T1200), ID:166]]
</gallery>

==Measuring and inspection tools==

{{hatnote|See also: the [[#Electronics equipment|electronics equipment section on this page]] for electrical and electronic measurement and test equipment.}}

<gallery mode="nolines" widths="160" heights="160">
File:97.jpg|[[Inspection mirror, 18" gooseneck ID:97]]
File:98.jpg|[[Magnifier lamp, large, with lid ID:98]]
File:99.jpg|[[Magnifier lamp, large, without lid ID:99]]
File:100.jpg|[[Magnifier lamp, small, with lid ID:100]]
File:101.jpg|[[Measuring tapes ID:101]]
File:102.jpg|[[Rulers ID:102]]
File:103.jpg|[[Squares ID:103]]
File:104.jpg|[[Thermometer, infrared (H64) ID:104]]
</gallery>

==Miscellaneous tools==

<gallery mode="nolines" widths="160" heights="160">
File:111.jpg|[[Air compressor, 80-gallon (MAXair Premium) ID:111]]
File:112.jpg|[[Air compressor, silent ID:112]]
File:115.jpg|[[Engraver ID:115]]
File:116.jpg|[[Hand truck, red ID:116]]
File:117.jpg|[[Hot-wire foam cutter, handheld, 4.5"×5.5" (Woodland Scenics) ID:117]]
File:118.jpg|[[Hot-wire foam cutter, tabletop, 14"×12" ID:118]]
File:127.jpg|[[Oil can, blue ID:127]]
File:128.jpg|[[Painting tools ID:128]]
File:129.jpg|[[Pinball machine (Williams Road Kings) ID:129]]
File:130.jpg|[[Sandblasting cabinet, floor, blue (Powerfist) ID:130]]
File:131.jpg|[[Screwdriver magnetizer/demagnetizer (Wiha 40010) ID:131]]
File:132.jpg|[[Shop vacuum, orange ID:132]]
File:133.jpg|[[Staple gun (Arrow T-18) ID:133]]
File:122.jpg|[[Tile work surfaces ID:122]]
File:123.jpg|[[Tile work surfaces ID:123]]
File:134.jpg|[[Vacuum cart ID:134]]
File:136.jpg|[[Vacuum cleaner, portable ID:136]]
File:137.jpg|[[Vacuum pump (Edwards SpeediVac ED200) ID:137]]
File:161.jpg|[[Laminator (Scotch TL902) ID:161]]
File:166.jpg|[[Printer, 44" Large Format (HP DesignJet T1200), ID:166]]
File:169.png|[[ADS-B Base Station, FlightAware, ID:169]]
File:176.jpg|[[Vending machine, pop (Vendo 576) ID:176]]
File:177.jpg|[[Vending machine, snacks (Crane 173) ID:177]]
</gallery>

==Removed equipment==

In case they are brought back, or, so people who could have sworn we had a tool know it was removed.

<gallery style="background: darksalmon" mode="nolines">
File:6.jpg|[[Laser cutter, large (Rabbit Laser RL-80-1290) ID:6]]
File:3DP RapMan.jpg|[[3D printer (3D Systems RapMan)]]
File:3D printer, Come3D!.jpg|[[3D printer (Come3D!)]]
File:3DP Cupcake.jpg|[[3D printer (MakerBot Cupcake)]]
File:1.jpg|[[3D printer, FFF (IIIP) ID:1]]
File:3D printer, Nathan Ward's RepRap.jpg|[[3D printer, FFF (RepRap)]]
File:3D printer, Yin's Wanhao.jpg|[[3D printer, FFF (Wanhao Duplicator i3)]]
File:InVision si2.jpg|[[3D printer, MJM (3D Systems InVision si2)]]
File:NoImage.png|[[3D printer, SLA (mUVe 1) ID:5]]
File:Compressor Dewalt.jpg|[[Air compressor, 4-gallon (DeWalt)]]
File:Compressor Big.jpg|[[Air compressor, 17-gallon]]
File:110.jpg|[[Air compressor, 60-gallon (Campbell Hausfeld) ID:110]]
File:Reciprocating compressor.jpg|[[Air compressor, 80-gallon (Ingersoll Rand T30)]]
File:113.jpg|[[Air pump, foot-operated (Bell FootPumper) ID:113]]
File:Angle Grinder.jpg|[[Angle grinder (Kawasaki)]]
File:Anvil 75lb.jpg|[[Anvil]]
File:Bandsaw Horizontal.jpg|[[Bandsaw, metal, horizontal (Craftex B013N)]]
File:Bending Brake.jpg|[[Bending brake, 30" (Powerfist)]]
File:114.jpg|[[Bicycle tire jig ID:114]]
File:Buffer Benchtop.jpg|[[Buffer (Clarke 2H 5AB)]]
File:13.jpg|[[Counter (Fluke 1910A Multi-Counter) ID:13]]
File:Dewars.jpg|[[Dewars, 50-litre]]
File:Drill Dewalt.jpg|[[Drill, corded (DeWalt)]]
File:Pick N Place.jpg|[[Electronics assembly pick and place machine (Multitronics 2000LX)]]
File:Forge Propane 2.jpg|[[Forge, propane (Jim's)]]
File:43.jpg|[[Forge (Travis's) ID:43]]
File:NoImage.png|[[Forge, propane, pass-through ID:44]]
File:17.jpg|[[Function generator (Krohn–Hite 5100A) ID:17]]
File:Impact Driver.jpg|[[Impact driver (DeWalt)]]
File:7.jpg|[[Laser cutter, small ID:7]]
File:Lathe, Torrent T.72-42.jpg|[[Lathe, metal (Torrent T.72-42)]]
File:Lathe Mill.jpg|[[Lathe–mill combination (Craftex B2229)]]
File:Lathe Wood Mini.jpg|[[Lathe, wood (Haussmann)]]
File:MaxNC10.jpg|[[Milling machine, CNC, mini (MAXNC 10)]]
File:Audio mixing board.jpg|[[PA system (Dan Damron's)]]
File:22.jpg|[[Oscilloscope (Kikusui COS 5060) ID:22]]
File:50.jpg|[[Oxyacetylene torch, large ID:50]]
File:Parts washer, Powerfist 3.5 L.jpg|[[Parts washer, 3.5 L (Powerfist)]]
File:Plasma cutter.thumbnail.jpg|[[Plasma cutter, CNC (Kyle Paavola's)]]
File:Router Plunge Makita.jpg|[[Router, plunge (Makita 3612BR)]]
File:10.jpg|[[Press (Powerfist) ID:10]]
File:NoImage.png|[[Router table, wooden ID:81]]
File:87.jpg|[[87|Sander, random orbital (Skil 7492) ID:87]]
File:Chop Saw.jpg|[[Saw, compound mitre (Ryobi)]]
File:Chopsaw Metal.jpg|[[Saw, compound mitre, metal (Ryobi)]]
File:Reciprocating Saw.jpg|[[Saw, sabre (Mastercraft)]]
File:Skil Saw BD.jpg|[[Saw, handheld circular, 7 1/4" (Black & Decker)]]
File:Skil Saw Red.jpg|[[Saw, handheld circular (Skil)]]
File:90.jpg|[[Scroll saw (Mastercraft 55-6714-6) ID:90]]
File:119.jpg|[[Sewing machine, industrial (Relsew) ID:119]]
File:Shaper, metal.jpg|[[Shaper, 7"]]
File:Taps Grey.jpg|[[Tap & die set (Mastercraft)]]
File:OxyAce Mini.jpg|[[Torch, oxygen–acetylene, mini]]
File:32.jpg|[[UV photomasker (Dan's) ID:32]]
File:135.jpg|[[Vacuum pump ID:135]]
File:Vice Medium.jpg|[[Vise, medium (Irwin)]]
File:Welder MIG.jpg|[[Welder, MIG (Lincoln Weld-Pak 100)]]
File:55.jpg|[[Welder, stick, orange (Acklands 225 AC Sizzler) ID:55]]
File:109.jpg|[[Welder, Stick, AC/DC (Miller Thunderbolt XL) ID:109]]
File:74.jpg|[[Miter saw, compound, sliding (Hitachi) ID:74]]
File:142.jpg|[[Brake, shear, roller, 52" (Magnum) ID:142]]
File:146.jpg|[[Garment graphic printer, direct inject (Brother GT-361) ID:146]]
</gallery>

Thunder Nova 51 Laser

2024-03-09T19:15:45Z

Pat.spencer: Pat.spencer moved page Thunder Nova 51 Laser to Thunder Nova 51 Laser ID:178: Added Number as per instructions

#REDIRECT [[Thunder Nova 51 Laser ID:178]]

Laser Cutter, Thunder Nova 51 ID:178

2024-03-09T19:15:45Z

Pat.spencer: Pat.spencer moved page Thunder Nova 51 Laser to Thunder Nova 51 Laser ID:178: Added Number as per instructions

{{Equipment page
| toolname = Thunder Nova 51 Laser
| model = Nova 51
| serial = ?
| owner = ProtoSpace
| loanstatus = N/A
| arrived = ?
| location = ?
| status = ?
| permission = ?
| certification = ?
| photo = Thunder-51-01.jpg
| caption =
| id =
}}

==Specs==
TBD

==Usage==
TBD

==Troubleshooting==
TBD

==Documentation==
TBD

Tools we have

2024-03-09T19:09:28Z

Pat.spencer: /* Rapid prototyping tools */

Want to '''add a new tool'''? Follow [[Protospace Wiki:Adding new tools|this procedure]]!

We can always use new tools. Please feel free to [[contact information|contact Protospace]] to donate, arrange for pickup, or drop them off in person.

If you are interested in knowing what kind of tools we are looking for, we also have a member-managed [[Tools we want|tool wishlist]], but your best bet on figuring out if we want something is simply asking on our [https://forum.protospace.ca forum].

We also have [[:Category:Tools|an alphabetically ordered and categorized tool catalog]].

__TOC__

==Rapid prototyping tools==

{{hatnote|Comparisons: [[our 3D printers]], [[our laser cutters]]}}

<gallery mode="nolines" widths="160" heights="160">
File:2.jpg|[[3D printer, FFF (ORD Bot Hadron) ID:2]]
File:3.jpg|[[3D printer, FFF (PrusaMD) ID:3]]
File:159.jpg|[[3D printer, resin (Anycubic Photon 5.5) ID:159]]
File:170.jpg|[[3D_printer, resin (ELEGOO Saturn) ID:170]]
File:160.jpg|[[Curing station (Anycubic Wash and Cure Machine) ID:160]]
File:Thunder-51-01.jpg|[[Thunder Nova 51 Laser ID:178]]
File:107.jpg|[[Laser cutter (Trotec Speedy 300) ID:107]]
File:141.jpg|[[CNC router, mini (TD 3040) ID:141]]
File:Precix-CNC-001.jpg|[[CNC router, wood (Precix) ID:153]]
File:LongMill-on-Shelf-01.png|[[CNC router, benchtop (SIENCI LongMill) ID:143]]
</gallery>

==Automotive tools==

<gallery mode="nolines" widths="160" heights="160">
File:8.jpg|[[Floor jack, blue ID:8]]
File:9.jpg|[[Trolley jack and axle stand kit (Certified) ID:9]]
File:11.jpg|[[Socket set ID:11]]
File:162.jpeg|[[Bike stand (Feedback Sport) ID:162]]
</gallery>

==Chemistry==

<gallery mode="nolines" widths="160" heights="160">
File:12.jpg|[[Oxygen concentrator (OGSI OG-15) ID:12]]
</gallery>

==Electronics equipment==

<gallery mode="nolines" widths="160" heights="160">
File:14.jpg|[[Counter (Lafayette 54517) ID:14]]
File:15.jpg|[[Decade box, capacitance (Servomex Controls Decade Capacitor Type B) ID:15]]
File:16.jpg|[[Function generator (John's) ID:16]]
File:18.jpg|[[Heat gun (Powerfist) ID:18]]
File:19.jpg|[[Logic analyzer (HP 1631D) ID:19]]
File:20.jpg|[[Multimeter, digital (Pro.Point 8344665) ID:20]]
File:167.jpg|[[Oscilloscope (Siglent SDS1104X-E) ID:167]]
File:23.jpg|[[Oscilloscope (Tektronix 2225) ID:23]]
File:24.jpg|[[Oscilloscope (Tektronix 2465A) ID:24]]
File:25.jpg|[[Oscilloscope, PC (Syscomp DSO-101) ID:25]]
File:26.jpg|[[Power supply, bench (GQ Electronics GQ-A305D) ID:26]]
File:27.jpg|[[Power supply, bench, 500 V (Heathkit PS-3) ID:27]]
File:28.jpg|[[Power supply, bench, 2-channel (TENMA 72-7245) ID:28]]
File:30.jpg|[[Hot-air rework station (GQ Electronics 5200) ID:30]]
File:31.jpg|[[Solder fume extractor (Metcal) ID:31]]
File:33.jpg|[[Waveform generator (Syscomp WGM-101) ID:33]]
File:34.jpg|[[Waveform monitor (Tektronix 1730) ID:34]]
File:145-Welcome-Monitor.png|[[Welcome Room Monitor ID:145]]
</gallery>

==Metalworking tools==

<gallery mode="nolines" widths="160" heights="160">
File:35.jpg|[[Angle grinder (DeWalt) ID:35]]
File:37.jpg|[[Bandsaw, metal, horizontal ID:37]]
File:165.jpg|[[Bandsaw, metal, horizontal (Westward UE-712) ID:165]]
File:39.jpg|[[Bench grinder (Powerfist) ID:39]]
File:40.jpg|[[Bench grinder (Trademaster PR14210) ID:40]]
File:151.jpg|[[Brake, box and pan, 24" (Magnum) ID:151]]
File:42.jpg|[[Drill press (Mastercraft) ID:42]]
File:45.jpg|[[Foundry, propane ID:45]]
File:121.jpg|[[Hydraulic press, 50-ton, electric ID:121]]
File:46.jpg|[[Lathe, metal (Challenger 1660G) ID:46]]
File:47.jpg|[[Lathe, miniature (Taig Microlathe II) ID:47]]
File:53.jpg|[[Metal shear (Magnum) ID:53]]
File:48.jpg|[[Milling machine (ACRA AM4V) ID:48]]
File:49.jpg|[[Milling machine, CNC (Tormach PCNC 1100) ID:49]]
File:173.png|[[Plasma Cutter (Hypertherm, Powermax85) ID:173]]
File:51.jpg|[[Plasma cutter, huge (Powercut 1500) ID:51]]
File:52.jpg|[[Plasma cutter, small (Miller Spectrum 375) ID:52]]
File:54.jpg|[[Vise, giant ID:54]]
File:56.jpg|[[Welding magnets ID:56]]
File:Metalworking pattern maker's vise.jpg|[[Metalworking pattern maker's vise]]
File:Metal drill press.jpg|[[HD gear driven drill press/mill]]
File:163.jpg|[[Pipe bender (Power Fist 12 ton hydraulic) ID:163]]
</gallery>

==Woodworking and plasticworking tools==

<gallery mode="nolines" widths="160" heights="160">
File:171-Wood-Lathe-Jet.jpg|[[Wood Lathe, JET JWL-1236 ID:171]]
File:57.jpg|[[Bandsaw, green ID:57]]
File:59.jpg|[[Clamps ID:59]]
File:61.jpg|[[Drill, hand, corded, black (Jobmate) ID:61]]
File:62.jpg|[[Drill, hand, corded, dark blue (Ryobi) ID:62]]
File:67.jpg|[[Drill, hand, cordless (DeWalt) ID:67]]
File:68.jpg|[[Drill, hand, corded (Makita DP3720) ID:68]]
File:69.jpg|[[Drill press, 8" (Jobmate) ID:69]]
File:70.jpg|[[Jigsaw, corded (Black & Decker) ID:70]]
File:72.jpg|[[Jigsaw (Skil) ID:72]]
File:75.jpg|[[Nailer, pneumatic, 2-in-1 ID:75]]
File:108.jpg|[[Planer (Jet JPM-13CS) ID:108]]
File:76.jpg|[[Plate joiner (Porter Cable 557) ID:76]]
File:140.jpg|[[Pocket hole jig (Kreg K3) ID:140]]
File:78.jpg|[[Rotary tool, corded (Mastercraft) ID:78]]
File:79.jpg|[[Rotary tool, cordless (Dremel) ID:79]]
File:124.jpg|[[Router table (Jeff's) ID:124]]
File:83.jpg|[[Sander, belt (Makita 9402) ID:83]]
File:84.jpg|[[Sander, belt/disc (Dremel 730) ID:84]]
File:85.jpg|[[Sander, detail (Ryobi) ID:85]]
File:106.jpg|[[Sander, drum (General International 15-250 M1) ID:106]]
File:138.jpg|[[Sander, random orbital (Ridgid R2601) ID:138]]
File:139.jpg|[[Sander, random orbital (Ridgid R2601) ID:139]]
File:88.jpg|[[Sander, straight-line/orbital (Black & Decker Deluxe) ID:88]]
File:89.jpg|[[Scroll saw (Dremel) ID:89]]
File:91.jpg|[[Table saw (Craftex CX201) ID:91]]
File:92.jpg|[[Thickness planer (Ryobi AP1301) ID:92]]
File:93.jpg|[[Vacuum, sawdust (Craftex CX404) ID:93]]
File:NoImage.png|[[Vise, wood ID:94]]
File:95.jpg|[[Vise, wood (Travis's) ID:95]]
File:Makita cordless jigsaw.jpg|cordless Makita jig saw
File:Ridgid random orbital sander (1 of 2, unknown which one).jpg|Ridgid random orbital sander (2 of these)
File:6" jointer.jpg|6" jointer
File:DeWalt sliding compound miter saw.jpg|12" Dewalt sliding compound miter saw
File:Wood tools sharpening station.jpg|A sharpening station with a plethora of tool sharpening grinders-jigs-etc
File:149.jpg|[[Drill press, floor mounted, variable speed ID:149]]
File:164.jpg|[[Handheld metal detector ID:164]]
File:168.jpg|[[Planer, 16" Auto Planer]]
File:172.jpg|[[Table saw (SawStop) ID:172]]
File:174.jpg|[[drying rack (coyle-made) ID:174]]
</gallery>

==Textile, Vinyl, and Media tools==

<gallery mode="nolines" widths="160" heights="160">
File:120.jpg|[[Sewing machine, domestic (Singer 1802) ID:120]]
File:Singer 211G155.jpg|[[Sewing machine, industrial (Singer 211G155) ID:147]]
File:144.jpg|[[Embroidery machine, CNC (Tajima TEJT II-C NEO 1501) ID:144]]
File:150.jpg|[[Sewing/embroidery machine, computer controlled (Singer Futura CE-250) ID:150]]
File:156.jpg|[[Sewing machine, domestic (Janome HD-1000) ID:156]]
File:157.jpg|[[Serger, 4 thread (Singer 14U34B) ID:157]]
File:158.jpg|[[Serger, 4 thread, (Janome MyLock 634D) ID:158]]
File:148.jpg|[[Vinyl cutter, big (Graphtec FC8000-75) ID:148]]
File:NoImage.png|Vinyl cutter, small (Silhouette Cameo), on loan from Jamie Frost
File:154.jpg|[[Heat press, digital (Geo Knight & Co, Inc. K20S) ID:154]]
File:155.jpg|[[Heat press, auto release (Insta Graphic Systems 158) ID:155]]
File:166.jpg|[[Printer, 44" Large Format (HP DesignJet T1200), ID:166]]
</gallery>

==Measuring and inspection tools==

{{hatnote|See also: the [[#Electronics equipment|electronics equipment section on this page]] for electrical and electronic measurement and test equipment.}}

<gallery mode="nolines" widths="160" heights="160">
File:97.jpg|[[Inspection mirror, 18" gooseneck ID:97]]
File:98.jpg|[[Magnifier lamp, large, with lid ID:98]]
File:99.jpg|[[Magnifier lamp, large, without lid ID:99]]
File:100.jpg|[[Magnifier lamp, small, with lid ID:100]]
File:101.jpg|[[Measuring tapes ID:101]]
File:102.jpg|[[Rulers ID:102]]
File:103.jpg|[[Squares ID:103]]
File:104.jpg|[[Thermometer, infrared (H64) ID:104]]
</gallery>

==Miscellaneous tools==

<gallery mode="nolines" widths="160" heights="160">
File:111.jpg|[[Air compressor, 80-gallon (MAXair Premium) ID:111]]
File:112.jpg|[[Air compressor, silent ID:112]]
File:115.jpg|[[Engraver ID:115]]
File:116.jpg|[[Hand truck, red ID:116]]
File:117.jpg|[[Hot-wire foam cutter, handheld, 4.5"×5.5" (Woodland Scenics) ID:117]]
File:118.jpg|[[Hot-wire foam cutter, tabletop, 14"×12" ID:118]]
File:127.jpg|[[Oil can, blue ID:127]]
File:128.jpg|[[Painting tools ID:128]]
File:129.jpg|[[Pinball machine (Williams Road Kings) ID:129]]
File:130.jpg|[[Sandblasting cabinet, floor, blue (Powerfist) ID:130]]
File:131.jpg|[[Screwdriver magnetizer/demagnetizer (Wiha 40010) ID:131]]
File:132.jpg|[[Shop vacuum, orange ID:132]]
File:133.jpg|[[Staple gun (Arrow T-18) ID:133]]
File:122.jpg|[[Tile work surfaces ID:122]]
File:123.jpg|[[Tile work surfaces ID:123]]
File:134.jpg|[[Vacuum cart ID:134]]
File:136.jpg|[[Vacuum cleaner, portable ID:136]]
File:137.jpg|[[Vacuum pump (Edwards SpeediVac ED200) ID:137]]
File:161.jpg|[[Laminator (Scotch TL902) ID:161]]
File:166.jpg|[[Printer, 44" Large Format (HP DesignJet T1200), ID:166]]
File:169.png|[[ADS-B Base Station, FlightAware, ID:169]]
File:176.jpg|[[Vending machine, pop (Vendo 576) ID:176]]
File:177.jpg|[[Vending machine, snacks (Crane 173) ID:177]]
</gallery>

==Removed equipment==

In case they are brought back, or, so people who could have sworn we had a tool know it was removed.

<gallery style="background: darksalmon" mode="nolines">
File:6.jpg|[[Laser cutter, large (Rabbit Laser RL-80-1290) ID:6]]
File:3DP RapMan.jpg|[[3D printer (3D Systems RapMan)]]
File:3D printer, Come3D!.jpg|[[3D printer (Come3D!)]]
File:3DP Cupcake.jpg|[[3D printer (MakerBot Cupcake)]]
File:1.jpg|[[3D printer, FFF (IIIP) ID:1]]
File:3D printer, Nathan Ward's RepRap.jpg|[[3D printer, FFF (RepRap)]]
File:3D printer, Yin's Wanhao.jpg|[[3D printer, FFF (Wanhao Duplicator i3)]]
File:InVision si2.jpg|[[3D printer, MJM (3D Systems InVision si2)]]
File:NoImage.png|[[3D printer, SLA (mUVe 1) ID:5]]
File:Compressor Dewalt.jpg|[[Air compressor, 4-gallon (DeWalt)]]
File:Compressor Big.jpg|[[Air compressor, 17-gallon]]
File:110.jpg|[[Air compressor, 60-gallon (Campbell Hausfeld) ID:110]]
File:Reciprocating compressor.jpg|[[Air compressor, 80-gallon (Ingersoll Rand T30)]]
File:113.jpg|[[Air pump, foot-operated (Bell FootPumper) ID:113]]
File:Angle Grinder.jpg|[[Angle grinder (Kawasaki)]]
File:Anvil 75lb.jpg|[[Anvil]]
File:Bandsaw Horizontal.jpg|[[Bandsaw, metal, horizontal (Craftex B013N)]]
File:Bending Brake.jpg|[[Bending brake, 30" (Powerfist)]]
File:114.jpg|[[Bicycle tire jig ID:114]]
File:Buffer Benchtop.jpg|[[Buffer (Clarke 2H 5AB)]]
File:13.jpg|[[Counter (Fluke 1910A Multi-Counter) ID:13]]
File:Dewars.jpg|[[Dewars, 50-litre]]
File:Drill Dewalt.jpg|[[Drill, corded (DeWalt)]]
File:Pick N Place.jpg|[[Electronics assembly pick and place machine (Multitronics 2000LX)]]
File:Forge Propane 2.jpg|[[Forge, propane (Jim's)]]
File:43.jpg|[[Forge (Travis's) ID:43]]
File:NoImage.png|[[Forge, propane, pass-through ID:44]]
File:17.jpg|[[Function generator (Krohn–Hite 5100A) ID:17]]
File:Impact Driver.jpg|[[Impact driver (DeWalt)]]
File:7.jpg|[[Laser cutter, small ID:7]]
File:Lathe, Torrent T.72-42.jpg|[[Lathe, metal (Torrent T.72-42)]]
File:Lathe Mill.jpg|[[Lathe–mill combination (Craftex B2229)]]
File:Lathe Wood Mini.jpg|[[Lathe, wood (Haussmann)]]
File:MaxNC10.jpg|[[Milling machine, CNC, mini (MAXNC 10)]]
File:Audio mixing board.jpg|[[PA system (Dan Damron's)]]
File:22.jpg|[[Oscilloscope (Kikusui COS 5060) ID:22]]
File:50.jpg|[[Oxyacetylene torch, large ID:50]]
File:Parts washer, Powerfist 3.5 L.jpg|[[Parts washer, 3.5 L (Powerfist)]]
File:Plasma cutter.thumbnail.jpg|[[Plasma cutter, CNC (Kyle Paavola's)]]
File:Router Plunge Makita.jpg|[[Router, plunge (Makita 3612BR)]]
File:10.jpg|[[Press (Powerfist) ID:10]]
File:NoImage.png|[[Router table, wooden ID:81]]
File:87.jpg|[[87|Sander, random orbital (Skil 7492) ID:87]]
File:Chop Saw.jpg|[[Saw, compound mitre (Ryobi)]]
File:Chopsaw Metal.jpg|[[Saw, compound mitre, metal (Ryobi)]]
File:Reciprocating Saw.jpg|[[Saw, sabre (Mastercraft)]]
File:Skil Saw BD.jpg|[[Saw, handheld circular, 7 1/4" (Black & Decker)]]
File:Skil Saw Red.jpg|[[Saw, handheld circular (Skil)]]
File:90.jpg|[[Scroll saw (Mastercraft 55-6714-6) ID:90]]
File:119.jpg|[[Sewing machine, industrial (Relsew) ID:119]]
File:Shaper, metal.jpg|[[Shaper, 7"]]
File:Taps Grey.jpg|[[Tap & die set (Mastercraft)]]
File:OxyAce Mini.jpg|[[Torch, oxygen–acetylene, mini]]
File:32.jpg|[[UV photomasker (Dan's) ID:32]]
File:135.jpg|[[Vacuum pump ID:135]]
File:Vice Medium.jpg|[[Vise, medium (Irwin)]]
File:Welder MIG.jpg|[[Welder, MIG (Lincoln Weld-Pak 100)]]
File:55.jpg|[[Welder, stick, orange (Acklands 225 AC Sizzler) ID:55]]
File:109.jpg|[[Welder, Stick, AC/DC (Miller Thunderbolt XL) ID:109]]
File:74.jpg|[[Miter saw, compound, sliding (Hitachi) ID:74]]
File:142.jpg|[[Brake, shear, roller, 52" (Magnum) ID:142]]
File:146.jpg|[[Garment graphic printer, direct inject (Brother GT-361) ID:146]]
</gallery>

Laser Cutter, Thunder Nova 51 ID:178

2024-03-09T19:07:06Z

Pat.spencer:

{{Equipment page
| toolname = Thunder Nova 51 Laser
| model = Nova 51
| serial = ?
| owner = ProtoSpace
| loanstatus = N/A
| arrived = ?
| location = ?
| status = ?
| permission = ?
| certification = ?
| photo = Thunder-51-01.jpg
| caption =
| id =
}}

==Specs==
TBD

==Usage==
TBD

==Troubleshooting==
TBD

==Documentation==
TBD

File:Thunder-51-01.jpg

2024-03-09T19:04:55Z

Pat.spencer:

178

2024-03-09T19:02:21Z

Pat.spencer: Created page with "{{subst:id|Thunder Nova 51 Laser}}"

#REDIRECT [[Thunder Nova 51 Laser]]{{id/after-redirect}}

Laser Cutter, Thunder Nova 51 ID:178

2024-03-09T18:53:28Z

Pat.spencer: Create Initial "Tools we Have" Page

{{Equipment page
| toolname = Thunder Nova 51 Laser
| model = Nova 51
| serial = ?
| owner = ProtoSpace
| loanstatus = N/A
| arrived = ?
| location = ?
| status = ?
| permission = ?
| certification = ?
| photo =
| caption =
| id =
}}

==Specs==
TBD

==Usage==
TBD

==Troubleshooting==
TBD

==Documentation==
TBD