Protospace Wiki - User contributions [en]

ADS-B Base Station, FlightAware, ID:169

2023-01-18T03:24:45Z

Peter.carless: add inside photo

{{Equipment page
| toolname = ADS-B Base Station, FlightAware
| model = PiAware
| serial =
| owner = Calgary Protospace
| loanstatus = Donated by Peter Carless
| arrived = 2019
| location = Classroom (south east corner)
| status = active
| permission = accessible to anyone attached to Protospace lan
| certification =
| photo = 169.png
| caption =
| id =
}}The tracker is built using the following:

Raspberry pi model 3B

Flightaware RTL-SDR USB software defined radio.

POE to 12 VDC adapter

Buck converter to convert 12 VDC to 5 VDC for Raspberry pi.

1090 MHZ high gain antenna.

<nowiki>https://flightaware.com/adsb/piaware/build</nowiki>

Obtaining current flight data of local aircraft is as simple as connecting to

The Protospace wifi network and pointing your browser to the IP address

Of the Raspberry Pi, and then clicking the “Go to Skyaware Map”.

The current current IP address is http://172.17.18.176.
<br />
[[File:Flightaware-base-station-internals.png|left|thumb]]
<br />

File:Flightaware-base-station-internals.png

2023-01-18T03:24:21Z

Peter.carless:

inside photo of flight aware

ADS-B Base Station, FlightAware, ID:169

2023-01-18T03:22:06Z

Peter.carless: add info

Tools we have

2023-01-18T03:20:27Z

Peter.carless: fix photo

{{Warning|Adding a new tool to the wiki? [[Protospace Wiki:Adding new tools|The procedure]] has been revamped! Please follow it as closely as you can, and report any problems on its talk page or the forum. [[0|The procedure for assigning wiki-ID numbers]] has been revamped too; please read it before giving anything a number!}}

We can always use new tools! Please feel free to [[contact information|contact Protospace]] to donate, arrange for pickup, or drop them off in person.

If you are interested in knowing what kind of tools we are looking for, we also have a member-managed [[Tools we want|tool wishlist]], but your best bet on figuring out if we want something is simply asking on our [https://forum.protospace.ca forum].

We also have [[:Category:Tools|an alphabetically ordered and categorized tool catalog]].

__TOC__

{{Warning|Treat the tools at Protospace with respect! Clean, functioning tools make for a happy crowd.}}

==Rapid prototyping tools==

{{hatnote|Comparisons: [[our 3D printers]], [[our laser cutters]]}}

<gallery>
File:2.jpg|link=2|[[3D printer, FFF (ORD Bot Hadron) ID:2]]
File:3.jpg|link=3|[[3D printer, FFF (PrusaMD) ID:3]]
File:159.jpg|link=159|[[3D printer, resin (Anycubic Photon 5.5) ID:159]]
File:160.jpg|link=160|[[Curing station (Anycubic Wash and Cure Machine) ID:160]]
File:6.jpg|link=6|[[Laser cutter, large (Rabbit Laser RL-80-1290) ID:6]]
File:107.jpg|link=107|[[Laser cutter (Trotec Speedy 300) ID:107]]
File:141.jpg|link=TD 3040 Mini CNC ID:141|[[TD 3040 Mini CNC ID:141]]
File:Precix-CNC-001.jpg|link=Precix-CNC ID:153|[[Precix-CNC ID:153]]
File:LongMill-on-Shelf-01.png|link=LongMill CNC ID:143|[[LongMill CNC ID:143]]
</gallery>

==Automotive tools==

<gallery>
File:8.jpg|link=Floor jack, blue ID:8|[[Floor jack, blue ID:8]]
File:9.jpg|link=Trolley jack and axle stand kit (Certified) ID:9|[[Trolley jack and axle stand kit (Certified) ID:9]]
File:11.jpg|link=Socket set ID:11|[[Socket set ID:11]]
File:162.jpeg|link=Bike stand (Feedback Sport) ID:162|[[Bike stand (Feedback Sport) ID:162]]
</gallery>

==Chemistry==

<gallery>
File:12.jpg|link=Oxygen concentrator (OGSI OG-15) ID:12|[[Oxygen concentrator (OGSI OG-15) ID:12]]
</gallery>

==Electronics equipment==

<gallery>
File:14.jpg|link=Counter (Lafayette 54517) ID:14|[[Counter (Lafayette 54517) ID:14]]
File:15.jpg|link=Decade box, capacitance (Servomex Controls Decade Capacitor Type B) ID:15|[[Decade box, capacitance (Servomex Controls Decade Capacitor Type B) ID:15]]
File:16.jpg|link=Function generator (John's) ID:16|[[Function generator (John's) ID:16]]
File:18.jpg|link=Heat gun (Powerfist) ID:18|[[Heat gun (Powerfist) ID:18]]
File:19.jpg|link=Logic analyzer (HP 1631D) ID:19|[[Logic analyzer (HP 1631D) ID:19]]
File:20.jpg|link=Multimeter, digital (Pro.Point 8344665) ID:20|[[Multimeter, digital (Pro.Point 8344665) ID:20]]
File:167.jpg|link=Oscilloscope (Siglent SDS1104X-E) ID:167|[[Oscilloscope (Siglent SDS1104X-E) ID:167]]
File:23.jpg|link=Oscilloscope (Tektronix 2225) ID:23|[[Oscilloscope (Tektronix 2225) ID:23]]
File:24.jpg|link=Oscilloscope (Tektronix 2465A) ID:24|[[Oscilloscope (Tektronix 2465A) ID:24]]
File:25.jpg|link=Oscilloscope, PC (Syscomp DSO-101) ID:25|[[Oscilloscope, PC (Syscomp DSO-101) ID:25]]
File:26.jpg|link=Power supply, bench (GQ Electronics GQ-A305D) ID:26|[[Power supply, bench (GQ Electronics GQ-A305D) ID:26]]
File:27.jpg|link=Power supply, bench, 500 V (Heathkit PS-3) ID:27|[[Power supply, bench, 500 V (Heathkit PS-3) ID:27]]
File:28.jpg|link=Power supply, bench, 2-channel (TENMA 72-7245) ID:28|[[Power supply, bench, 2-channel (TENMA 72-7245) ID:28]]
File:30.jpg|link=Hot-air rework station (GQ Electronics 5200) ID:30|[[Hot-air rework station (GQ Electronics 5200) ID:30]]
File:31.jpg|link=Solder fume extractor (Metcal) ID:31|[[Solder fume extractor (Metcal) ID:31]]
File:33.jpg|link=Waveform generator (Syscomp WGM-101) ID:33|[[Waveform generator (Syscomp WGM-101) ID:33]]
File:34.jpg|link=Waveform monitor (Tektronix 1730) ID:34|[[Waveform monitor (Tektronix 1730) ID:34]]
File:145-Welcome-Monitor.png|link=Welcome Room Monitor ID:145|[[Welcome Room Monitor ID:145]]
</gallery>

==Metalworking tools==

<gallery>
File:35.jpg|link=Angle grinder (DeWalt) ID:35|[[Angle grinder (DeWalt) ID:35]]
File:37.jpg|link=Bandsaw, metal, horizontal ID:37|[[Bandsaw, metal, horizontal ID:37]]
File:165.jpg|link=Bandsaw, metal, horizontal (Westward UE-712) ID:165|[[Bandsaw, metal, horizontal (Westward UE-712) ID:165]]
File:39.jpg|link=Bench grinder (Powerfist) ID:39|[[Bench grinder (Powerfist) ID:39]]
File:40.jpg|link=Bench grinder (Trademaster PR14210) ID:40|[[Bench grinder (Trademaster PR14210) ID:40]]
File:151.jpg|link=Brake, box and pan, 24" (Magnum) ID:151|[[Brake, box and pan, 24" (Magnum) ID:151]]
File:142.jpg|link=Brake, shear, roller, 52" (Magnum) ID:142|[[Brake, shear, roller, 52" (Magnum) ID:142]]
File:42.jpg|link=Drill press (Mastercraft) ID:42|[[Drill press (Mastercraft) ID:42]]
File:45.jpg|link=Foundry, propane ID:45|[[Foundry, propane ID:45]]
File:121.jpg|link=Hydraulic press, 50-ton, electric ID:121|[[Hydraulic press, 50-ton, electric ID:121]]
File:46.jpg|link=Lathe, metal (Challenger 1660G) ID:46|[[Lathe, metal (Challenger 1660G) ID:46]]
File:47.jpg|link=Lathe, miniature (Taig Microlathe II) ID:47|[[Lathe, miniature (Taig Microlathe II) ID:47]]
File:53.jpg|link=Metal shear (Magnum) ID:53|[[Metal shear (Magnum) ID:53]]
File:48.jpg|link=Milling machine (ACRA AM4V) ID:48|[[Milling machine (ACRA AM4V) ID:48]]
File:49.jpg|link=Milling machine, CNC (Tormach PCNC 1100) ID:49|[[Milling machine, CNC (Tormach PCNC 1100) ID:49]]
File:51.jpg|link=Plasma cutter, huge (Powercut 1500) ID:51|[[Plasma cutter, huge (Powercut 1500) ID:51]]
File:52.jpg|link=Plasma cutter, small (Miller Spectrum 375) ID:52|[[Plasma cutter, small (Miller Spectrum 375) ID:52]]
File:54.jpg|link=Vise, giant ID:54|[[Vise, giant ID:54]]
File:56.jpg|link=Welding magnets ID:56|[[Welding magnets ID:56]]
File:Metalworking pattern maker's vise.jpg|link=Metalworking pattern maker's vise|[[Metalworking pattern maker's vise]]
File:Metal drill press.jpg|link=HD gear driven drill press/mill|[[HD gear driven drill press/mill]]
File:163.jpg|link=Pipe bender (Power Fist 12 ton hydraulic) ID:163|[[Pipe bender (Power Fist 12 ton hydraulic) ID:163]]
</gallery>

==Woodworking and plasticworking tools==

<gallery>
File:57.jpg|link=57|[[Bandsaw, green ID:57]]
File:59.jpg|link=Clamps ID:59|[[Clamps ID:59]]
File:61.jpg|link=Drill, hand, corded, black (Jobmate) ID:61|[[Drill, hand, corded, black (Jobmate) ID:61]]
File:62.jpg|link=Drill, hand, corded, dark blue (Ryobi) ID:62|[[Drill, hand, corded, dark blue (Ryobi) ID:62]]
File:67.jpg|link=Drill, hand, cordless (DeWalt) ID:67|[[Drill, hand, cordless (DeWalt) ID:67]]
File:68.jpg|link=Drill, hand, corded (Makita DP3720) ID:68|[[Drill, hand, corded (Makita DP3720) ID:68]]
File:69.jpg|link=Drill press, 8" (Jobmate) ID:69|[[Drill press, 8" (Jobmate) ID:69]]
File:70.jpg|link=Jigsaw, corded (Black & Decker) ID:70|[[Jigsaw, corded (Black & Decker) ID:70]]
File:72.jpg|link=Jigsaw (Skil) ID:72|[[Jigsaw (Skil) ID:72]]
File:75.jpg|link=Nailer, pneumatic, 2-in-1 ID:75|[[Nailer, pneumatic, 2-in-1 ID:75]]
File:108.jpg|link=Planer (Jet JPM-13CS) ID:108|[[Planer (Jet JPM-13CS) ID:108]]
File:76.jpg|link=Plate joiner (Porter Cable 557) ID:76|[[Plate joiner (Porter Cable 557) ID:76]]
File:140.jpg|link=Pocket hole jig (Kreg K3) ID:140|[[Pocket hole jig (Kreg K3) ID:140]]
File:78.jpg|link=Rotary tool, corded (Mastercraft) ID:78|[[Rotary tool, corded (Mastercraft) ID:78]]
File:79.jpg|link=Rotary tool, cordless (Dremel) ID:79|[[Rotary tool, cordless (Dremel) ID:79]]
File:124.jpg|link=Router table (Jeff's) ID:124|[[Router table (Jeff's) ID:124]]
File:83.jpg|link=Sander, belt (Makita 9402) ID:83|[[Sander, belt (Makita 9402) ID:83]]
File:84.jpg|link=Sander, belt/disc (Dremel 730) ID:84|[[Sander, belt/disc (Dremel 730) ID:84]]
File:85.jpg|link=Sander, detail (Ryobi) ID:85|[[Sander, detail (Ryobi) ID:85]]
File:106.jpg|link=Sander, drum (General International 15-250 M1) ID:106|[[Sander, drum (General International 15-250 M1) ID:106]]
File:138.jpg|link=Sander, random orbital (Ridgid R2601) ID:138|[[Sander, random orbital (Ridgid R2601) ID:138]]
File:139.jpg|link=Sander, random orbital (Ridgid R2601) ID:139|[[Sander, random orbital (Ridgid R2601) ID:139]]
File:88.jpg|link=Sander, straight-line/orbital (Black & Decker Deluxe) ID:88|[[Sander, straight-line/orbital (Black & Decker Deluxe) ID:88]]
File:89.jpg|link=Scroll saw (Dremel) ID:89|[[Scroll saw (Dremel) ID:89]]
File:91.jpg|link=Table saw (Craftex CX201) ID:91|[[Table saw (Craftex CX201) ID:91]]
File:92.jpg|link=Thickness planer (Ryobi AP1301) ID:92|[[Thickness planer (Ryobi AP1301) ID:92]]
File:93.jpg|link=Vacuum, sawdust (Craftex CX404) ID:93|[[Vacuum, sawdust (Craftex CX404) ID:93]]
File:94.jpg|link=Vise, wood ID:94|[[Vise, wood ID:94]]
File:95.jpg|link=Vise, wood (Travis's) ID:95|[[Vise, wood (Travis's) ID:95]]
File:Makita cordless jigsaw.jpg|cordless Makita jig saw|cordless Makita jig saw
File:Ridgid random orbital sander (1 of 2, unknown which one).jpg|Ridgid random orbital sander (2 of these)
File:6" jointer.jpg|6" jointer
File:DeWalt sliding compound miter saw.jpg|12" Dewalt sliding compound miter saw
File:Wood tools sharpening station.jpg|A sharpening station with a plethora of tool sharpening grinders-jigs-etc
File:149.jpg|link=Drill press, floor mounted, variable speed ID:149|[[Drill press, floor mounted, variable speed ID:149]]
File:164.jpg|link=Handheld metal detector ID:164|[[Handheld metal detector ID:164]]
File:168.jpg|link=168|[[Planer, 16" Auto Planer]]
</gallery>

==Textile, Vinyl, and Media tools==

<gallery>
File:120.jpg|link=Sewing machine, domestic (Singer 1802) ID:120|[[Sewing machine, domestic (Singer 1802) ID:120]]
File:Singer 211G155.jpg|link=Sewing machine, industrial (Singer 211G155) ID:147|[[Sewing machine, industrial (Singer 211G155) ID:147]]
File:144.jpg|link=Embroidery machine, CNC (Tajima TEJT II-C NEO 1501) ID:144|[[Embroidery machine, CNC (Tajima TEJT II-C NEO 1501) ID:144]]
File:150.jpg|link=Sewing/embroidery machine, computer controlled (Singer Futura CE-250) ID:150|[[Sewing/embroidery machine, computer controlled (Singer Futura CE-250) ID:150]]
File:156.jpg|link=Sewing machine, domestic (Janome HD-1000) ID:156|[[Sewing machine, domestic (Janome HD-1000) ID:156]]
File:157.jpg|link=Serger, 4 thread (Singer 14U34B) ID:157|[[Serger, 4 thread (Singer 14U34B) ID:157]]
File:158.jpg|link=Serger, 4 thread, (Janome MyLock 634D) ID:158|[[Serger, 4 thread, (Janome MyLock 634D) ID:158]]
File:148.jpg|link=Vinyl cutter, big (Graphtec FC8000-75) ID:148|[[Vinyl cutter, big (Graphtec FC8000-75) ID:148]]
File:NoImage.png|Vinyl cutter, small (Silhouette Cameo), on loan from Jamie Frost
File:154.jpg|link=Heat press, digital (Geo Knight & Co, Inc. K20S) ID:154|[[Heat press, digital (Geo Knight & Co, Inc. K20S) ID:154]]
File:155.jpg|link=Heat press, auto release (Insta Graphic Systems 158) ID:155|[[Heat press, auto release (Insta Graphic Systems 158) ID:155]]
File:166.jpg|link=Printer, 44" Large Format (HP DesignJet T1200), ID:166|[[Printer, 44" Large Format (HP DesignJet T1200), ID:166]]
</gallery>

==Measuring and inspection tools==

{{hatnote|See also: the [[#Electronics equipment|electronics equipment section on this page]] for electrical and electronic measurement and test equipment.}}

<gallery>
File:97.jpg|link=Inspection mirror, 18" gooseneck ID:97|[[Inspection mirror, 18" gooseneck ID:97]]
File:98.jpg|link=Magnifier lamp, large, with lid ID:98|[[Magnifier lamp, large, with lid ID:98]]
File:99.jpg|link=Magnifier lamp, large, without lid ID:99|[[Magnifier lamp, large, without lid ID:99]]
File:100.jpg|link=Magnifier lamp, small, with lid ID:100|[[Magnifier lamp, small, with lid ID:100]]
File:101.jpg|link=Measuring tapes ID:101|[[Measuring tapes ID:101]]
File:102.jpg|link=Rulers ID:102|[[Rulers ID:102]]
File:103.jpg|link=Squares ID:103|[[Squares ID:103]]
File:104.jpg|link=Thermometer, infrared (H64) ID:104|[[Thermometer, infrared (H64) ID:104]]
</gallery>

==Miscellaneous tools==

<gallery>
File:111.jpg|link=Air compressor, 80-gallon (MAXair Premium) ID:111|[[Air compressor, 80-gallon (MAXair Premium) ID:111]]
File:112.jpg|link=Air compressor, silent ID:112|[[Air compressor, silent ID:112]]
File:115.jpg|link=Engraver ID:115|[[Engraver ID:115]]
File:116.jpg|link=Hand truck, red ID:116|[[Hand truck, red ID:116]]
File:117.jpg|link=Hot-wire foam cutter, handheld, 4.5"×5.5" (Woodland Scenics) ID:117|[[Hot-wire foam cutter, handheld, 4.5"×5.5" (Woodland Scenics) ID:117]]
File:118.jpg|link=Hot-wire foam cutter, tabletop, 14"×12" ID:118|[[Hot-wire foam cutter, tabletop, 14"×12" ID:118]]
File:127.jpg|link=Oil can, blue ID:127|[[Oil can, blue ID:127]]
File:128.jpg|link=Painting tools ID:128|[[Painting tools ID:128]]
File:129.jpg|link=Pinball machine (Williams Road Kings) ID:129|[[Pinball machine (Williams Road Kings) ID:129]]
File:130.jpg|link=Sandblasting cabinet, floor, blue (Powerfist) ID:130|[[Sandblasting cabinet, floor, blue (Powerfist) ID:130]]
File:131.jpg|link=Screwdriver magnetizer/demagnetizer (Wiha 40010) ID:131|[[Screwdriver magnetizer/demagnetizer (Wiha 40010) ID:131]]
File:132.jpg|link=Shop vacuum, orange ID:132|[[Shop vacuum, orange ID:132]]
File:133.jpg|link=Staple gun (Arrow T-18) ID:133|[[Staple gun (Arrow T-18) ID:133]]
File:122.jpg|link=Tile work surfaces ID:122|[[Tile work surfaces ID:122]]
File:123.jpg|link=Tile work surfaces ID:123|[[Tile work surfaces ID:123]]
File:134.jpg|link=Vacuum cart ID:134|[[Vacuum cart ID:134]]
File:136.jpg|link=Vacuum cleaner, portable ID:136|[[Vacuum cleaner, portable ID:136]]
File:137.jpg|link=Vacuum pump (Edwards SpeediVac ED200) ID:137|[[Vacuum pump (Edwards SpeediVac ED200) ID:137]]
File:161.jpg|link=Laminator (Scotch TL902) ID:161|[[Laminator (Scotch TL902) ID:161]]
File:166.jpg|link=Printer, 44" Large Format (HP DesignJet T1200), ID:166|[[Printer, 44" Large Format (HP DesignJet T1200), ID:166]]
File:169.png|link=ADS-B Base Station, FlightAware, ID:169|[[ADS-B Base Station, FlightAware, ID:169]]
</gallery>

==Removed equipment==

In case they are brought back, or, so people who could have sworn we had a tool know it was removed.

<gallery style="background: darksalmon">
File:3DP RapMan.jpg|[[3D printer (3D Systems RapMan)]]
File:3D printer, Come3D!.jpg|[[3D printer (Come3D!)]]
File:3DP Cupcake.jpg|[[3D printer (MakerBot Cupcake)]]
File:1.jpg|[[3D printer, FFF (IIIP) ID:1]]
File:3D printer, Nathan Ward's RepRap.jpg|[[3D printer, FFF (RepRap)]]
File:3D printer, Yin's Wanhao.jpg|[[3D printer, FFF (Wanhao Duplicator i3)]]
File:InVision si2.jpg|[[3D printer, MJM (3D Systems InVision si2)]]
File:NoImage.png|[[3D printer, SLA (mUVe 1) ID:5]]
File:Compressor Dewalt.jpg|[[Air compressor, 4-gallon (DeWalt)]]
File:Compressor Big.jpg|[[Air compressor, 17-gallon]]
File:110.jpg|[[Air compressor, 60-gallon (Campbell Hausfeld) ID:110]]
File:Reciprocating compressor.jpg|[[Air compressor, 80-gallon (Ingersoll Rand T30)]]
File:113.jpg|[[Air pump, foot-operated (Bell FootPumper) ID:113]]
File:Angle Grinder.jpg|[[Angle grinder (Kawasaki)]]
File:Anvil 75lb.jpg|[[Anvil]]
File:Bandsaw Horizontal.jpg|[[Bandsaw, metal, horizontal (Craftex B013N)]]
File:Bending Brake.jpg|[[Bending brake, 30" (Powerfist)]]
File:114.jpg|[[Bicycle tire jig ID:114]]
File:Buffer Benchtop.jpg|[[Buffer (Clarke 2H 5AB)]]
File:13.jpg|link=Counter (Fluke 1910A Multi-Counter) ID:13|[[Counter (Fluke 1910A Multi-Counter) ID:13]]
File:Dewars.jpg|[[Dewars, 50-litre]]
File:Drill Dewalt.jpg|[[Drill, corded (DeWalt)]]
File:Pick N Place.jpg|[[Electronics assembly pick and place machine (Multitronics 2000LX)]]
File:Forge Propane 2.jpg|[[Forge, propane (Jim's)]]
File:43.jpg|[[Forge (Travis's) ID:43]]
File:NoImage.png|[[Forge, propane, pass-through ID:44]]
File:17.jpg|[[Function generator (Krohn–Hite 5100A) ID:17]]
File:Impact Driver.jpg|[[Impact driver (DeWalt)]]
File:7.jpg|[[Laser cutter, small ID:7]]
File:Lathe, Torrent T.72-42.jpg|[[Lathe, metal (Torrent T.72-42)]]
File:Lathe Mill.jpg|[[Lathe–mill combination (Craftex B2229)]]
File:Lathe Wood Mini.jpg|[[Lathe, wood (Haussmann)]]
File:MaxNC10.jpg|[[Milling machine, CNC, mini (MAXNC 10)]]
File:Audio mixing board.jpg|[[PA system (Dan Damron's)]]
File:22.jpg|[[Oscilloscope (Kikusui COS 5060) ID:22]]
File:50.jpg|[[Oxyacetylene torch, large ID:50]]
File:Parts washer, Powerfist 3.5 L.jpg|[[Parts washer, 3.5 L (Powerfist)]]
File:Plasma cutter.thumbnail.jpg|[[Plasma cutter, CNC (Kyle Paavola's)]]
File:Router Plunge Makita.jpg|[[Router, plunge (Makita 3612BR)]]
File:10.jpg|[[Press (Powerfist) ID:10]]
File:NoImage.png|[[Router table, wooden ID:81]]
File:87.jpg|[[87|Sander, random orbital (Skil 7492) ID:87]]
File:Chop Saw.jpg|[[Saw, compound mitre (Ryobi)]]
File:Chopsaw Metal.jpg|[[Saw, compound mitre, metal (Ryobi)]]
File:Reciprocating Saw.jpg|[[Saw, sabre (Mastercraft)]]
File:Skil Saw BD.jpg|[[Saw, handheld circular, 7 1/4" (Black & Decker)]]
File:Skil Saw Red.jpg|[[Saw, handheld circular (Skil)]]
File:90.jpg|[[Scroll saw (Mastercraft 55-6714-6) ID:90]]
File:119.jpg|[[Sewing machine, industrial (Relsew) ID:119]]
File:Shaper, metal.jpg|[[Shaper, 7"]]
File:Taps Grey.jpg|[[Tap & die set (Mastercraft)]]
File:OxyAce Mini.jpg|[[Torch, oxygen–acetylene, mini]]
File:32.jpg|[[UV photomasker (Dan's) ID:32]]
File:135.jpg|[[Vacuum pump ID:135]]
File:Vice Medium.jpg|[[Vise, medium (Irwin)]]
File:Welder MIG.jpg|[[Welder, MIG (Lincoln Weld-Pak 100)]]
File:55.jpg|[[Welder, stick, orange (Acklands 225 AC Sizzler) ID:55]]
File:109.jpg|[[Welder, Stick, AC/DC (Miller Thunderbolt XL) ID:109]]
File:74.jpg|link=Miter saw, compound, sliding (Hitachi) ID:74|[[Miter saw, compound, sliding (Hitachi) ID:74]]
File:146.jpg|link=Garment graphic printer, direct inject (Brother GT-361) ID:146|[[Garment graphic printer, direct inject (Brother GT-361) ID:146]]
</gallery>

Tools we have

2023-01-18T03:20:03Z

Peter.carless:

{{Warning|Adding a new tool to the wiki? [[Protospace Wiki:Adding new tools|The procedure]] has been revamped! Please follow it as closely as you can, and report any problems on its talk page or the forum. [[0|The procedure for assigning wiki-ID numbers]] has been revamped too; please read it before giving anything a number!}}

We can always use new tools! Please feel free to [[contact information|contact Protospace]] to donate, arrange for pickup, or drop them off in person.

If you are interested in knowing what kind of tools we are looking for, we also have a member-managed [[Tools we want|tool wishlist]], but your best bet on figuring out if we want something is simply asking on our [https://forum.protospace.ca forum].

We also have [[:Category:Tools|an alphabetically ordered and categorized tool catalog]].

__TOC__

{{Warning|Treat the tools at Protospace with respect! Clean, functioning tools make for a happy crowd.}}

==Rapid prototyping tools==

{{hatnote|Comparisons: [[our 3D printers]], [[our laser cutters]]}}

<gallery>
File:2.jpg|link=2|[[3D printer, FFF (ORD Bot Hadron) ID:2]]
File:3.jpg|link=3|[[3D printer, FFF (PrusaMD) ID:3]]
File:159.jpg|link=159|[[3D printer, resin (Anycubic Photon 5.5) ID:159]]
File:160.jpg|link=160|[[Curing station (Anycubic Wash and Cure Machine) ID:160]]
File:6.jpg|link=6|[[Laser cutter, large (Rabbit Laser RL-80-1290) ID:6]]
File:107.jpg|link=107|[[Laser cutter (Trotec Speedy 300) ID:107]]
File:141.jpg|link=TD 3040 Mini CNC ID:141|[[TD 3040 Mini CNC ID:141]]
File:Precix-CNC-001.jpg|link=Precix-CNC ID:153|[[Precix-CNC ID:153]]
File:LongMill-on-Shelf-01.png|link=LongMill CNC ID:143|[[LongMill CNC ID:143]]
</gallery>

==Automotive tools==

<gallery>
File:8.jpg|link=Floor jack, blue ID:8|[[Floor jack, blue ID:8]]
File:9.jpg|link=Trolley jack and axle stand kit (Certified) ID:9|[[Trolley jack and axle stand kit (Certified) ID:9]]
File:11.jpg|link=Socket set ID:11|[[Socket set ID:11]]
File:162.jpeg|link=Bike stand (Feedback Sport) ID:162|[[Bike stand (Feedback Sport) ID:162]]
</gallery>

==Chemistry==

<gallery>
File:12.jpg|link=Oxygen concentrator (OGSI OG-15) ID:12|[[Oxygen concentrator (OGSI OG-15) ID:12]]
</gallery>

==Electronics equipment==

<gallery>
File:14.jpg|link=Counter (Lafayette 54517) ID:14|[[Counter (Lafayette 54517) ID:14]]
File:15.jpg|link=Decade box, capacitance (Servomex Controls Decade Capacitor Type B) ID:15|[[Decade box, capacitance (Servomex Controls Decade Capacitor Type B) ID:15]]
File:16.jpg|link=Function generator (John's) ID:16|[[Function generator (John's) ID:16]]
File:18.jpg|link=Heat gun (Powerfist) ID:18|[[Heat gun (Powerfist) ID:18]]
File:19.jpg|link=Logic analyzer (HP 1631D) ID:19|[[Logic analyzer (HP 1631D) ID:19]]
File:20.jpg|link=Multimeter, digital (Pro.Point 8344665) ID:20|[[Multimeter, digital (Pro.Point 8344665) ID:20]]
File:167.jpg|link=Oscilloscope (Siglent SDS1104X-E) ID:167|[[Oscilloscope (Siglent SDS1104X-E) ID:167]]
File:23.jpg|link=Oscilloscope (Tektronix 2225) ID:23|[[Oscilloscope (Tektronix 2225) ID:23]]
File:24.jpg|link=Oscilloscope (Tektronix 2465A) ID:24|[[Oscilloscope (Tektronix 2465A) ID:24]]
File:25.jpg|link=Oscilloscope, PC (Syscomp DSO-101) ID:25|[[Oscilloscope, PC (Syscomp DSO-101) ID:25]]
File:26.jpg|link=Power supply, bench (GQ Electronics GQ-A305D) ID:26|[[Power supply, bench (GQ Electronics GQ-A305D) ID:26]]
File:27.jpg|link=Power supply, bench, 500 V (Heathkit PS-3) ID:27|[[Power supply, bench, 500 V (Heathkit PS-3) ID:27]]
File:28.jpg|link=Power supply, bench, 2-channel (TENMA 72-7245) ID:28|[[Power supply, bench, 2-channel (TENMA 72-7245) ID:28]]
File:30.jpg|link=Hot-air rework station (GQ Electronics 5200) ID:30|[[Hot-air rework station (GQ Electronics 5200) ID:30]]
File:31.jpg|link=Solder fume extractor (Metcal) ID:31|[[Solder fume extractor (Metcal) ID:31]]
File:33.jpg|link=Waveform generator (Syscomp WGM-101) ID:33|[[Waveform generator (Syscomp WGM-101) ID:33]]
File:34.jpg|link=Waveform monitor (Tektronix 1730) ID:34|[[Waveform monitor (Tektronix 1730) ID:34]]
File:145-Welcome-Monitor.png|link=Welcome Room Monitor ID:145|[[Welcome Room Monitor ID:145]]
</gallery>

==Metalworking tools==

<gallery>
File:35.jpg|link=Angle grinder (DeWalt) ID:35|[[Angle grinder (DeWalt) ID:35]]
File:37.jpg|link=Bandsaw, metal, horizontal ID:37|[[Bandsaw, metal, horizontal ID:37]]
File:165.jpg|link=Bandsaw, metal, horizontal (Westward UE-712) ID:165|[[Bandsaw, metal, horizontal (Westward UE-712) ID:165]]
File:39.jpg|link=Bench grinder (Powerfist) ID:39|[[Bench grinder (Powerfist) ID:39]]
File:40.jpg|link=Bench grinder (Trademaster PR14210) ID:40|[[Bench grinder (Trademaster PR14210) ID:40]]
File:151.jpg|link=Brake, box and pan, 24" (Magnum) ID:151|[[Brake, box and pan, 24" (Magnum) ID:151]]
File:142.jpg|link=Brake, shear, roller, 52" (Magnum) ID:142|[[Brake, shear, roller, 52" (Magnum) ID:142]]
File:42.jpg|link=Drill press (Mastercraft) ID:42|[[Drill press (Mastercraft) ID:42]]
File:45.jpg|link=Foundry, propane ID:45|[[Foundry, propane ID:45]]
File:121.jpg|link=Hydraulic press, 50-ton, electric ID:121|[[Hydraulic press, 50-ton, electric ID:121]]
File:46.jpg|link=Lathe, metal (Challenger 1660G) ID:46|[[Lathe, metal (Challenger 1660G) ID:46]]
File:47.jpg|link=Lathe, miniature (Taig Microlathe II) ID:47|[[Lathe, miniature (Taig Microlathe II) ID:47]]
File:53.jpg|link=Metal shear (Magnum) ID:53|[[Metal shear (Magnum) ID:53]]
File:48.jpg|link=Milling machine (ACRA AM4V) ID:48|[[Milling machine (ACRA AM4V) ID:48]]
File:49.jpg|link=Milling machine, CNC (Tormach PCNC 1100) ID:49|[[Milling machine, CNC (Tormach PCNC 1100) ID:49]]
File:51.jpg|link=Plasma cutter, huge (Powercut 1500) ID:51|[[Plasma cutter, huge (Powercut 1500) ID:51]]
File:52.jpg|link=Plasma cutter, small (Miller Spectrum 375) ID:52|[[Plasma cutter, small (Miller Spectrum 375) ID:52]]
File:54.jpg|link=Vise, giant ID:54|[[Vise, giant ID:54]]
File:56.jpg|link=Welding magnets ID:56|[[Welding magnets ID:56]]
File:Metalworking pattern maker's vise.jpg|link=Metalworking pattern maker's vise|[[Metalworking pattern maker's vise]]
File:Metal drill press.jpg|link=HD gear driven drill press/mill|[[HD gear driven drill press/mill]]
File:163.jpg|link=Pipe bender (Power Fist 12 ton hydraulic) ID:163|[[Pipe bender (Power Fist 12 ton hydraulic) ID:163]]
</gallery>

==Woodworking and plasticworking tools==

<gallery>
File:57.jpg|link=57|[[Bandsaw, green ID:57]]
File:59.jpg|link=Clamps ID:59|[[Clamps ID:59]]
File:61.jpg|link=Drill, hand, corded, black (Jobmate) ID:61|[[Drill, hand, corded, black (Jobmate) ID:61]]
File:62.jpg|link=Drill, hand, corded, dark blue (Ryobi) ID:62|[[Drill, hand, corded, dark blue (Ryobi) ID:62]]
File:67.jpg|link=Drill, hand, cordless (DeWalt) ID:67|[[Drill, hand, cordless (DeWalt) ID:67]]
File:68.jpg|link=Drill, hand, corded (Makita DP3720) ID:68|[[Drill, hand, corded (Makita DP3720) ID:68]]
File:69.jpg|link=Drill press, 8" (Jobmate) ID:69|[[Drill press, 8" (Jobmate) ID:69]]
File:70.jpg|link=Jigsaw, corded (Black & Decker) ID:70|[[Jigsaw, corded (Black & Decker) ID:70]]
File:72.jpg|link=Jigsaw (Skil) ID:72|[[Jigsaw (Skil) ID:72]]
File:75.jpg|link=Nailer, pneumatic, 2-in-1 ID:75|[[Nailer, pneumatic, 2-in-1 ID:75]]
File:108.jpg|link=Planer (Jet JPM-13CS) ID:108|[[Planer (Jet JPM-13CS) ID:108]]
File:76.jpg|link=Plate joiner (Porter Cable 557) ID:76|[[Plate joiner (Porter Cable 557) ID:76]]
File:140.jpg|link=Pocket hole jig (Kreg K3) ID:140|[[Pocket hole jig (Kreg K3) ID:140]]
File:78.jpg|link=Rotary tool, corded (Mastercraft) ID:78|[[Rotary tool, corded (Mastercraft) ID:78]]
File:79.jpg|link=Rotary tool, cordless (Dremel) ID:79|[[Rotary tool, cordless (Dremel) ID:79]]
File:124.jpg|link=Router table (Jeff's) ID:124|[[Router table (Jeff's) ID:124]]
File:83.jpg|link=Sander, belt (Makita 9402) ID:83|[[Sander, belt (Makita 9402) ID:83]]
File:84.jpg|link=Sander, belt/disc (Dremel 730) ID:84|[[Sander, belt/disc (Dremel 730) ID:84]]
File:85.jpg|link=Sander, detail (Ryobi) ID:85|[[Sander, detail (Ryobi) ID:85]]
File:106.jpg|link=Sander, drum (General International 15-250 M1) ID:106|[[Sander, drum (General International 15-250 M1) ID:106]]
File:138.jpg|link=Sander, random orbital (Ridgid R2601) ID:138|[[Sander, random orbital (Ridgid R2601) ID:138]]
File:139.jpg|link=Sander, random orbital (Ridgid R2601) ID:139|[[Sander, random orbital (Ridgid R2601) ID:139]]
File:88.jpg|link=Sander, straight-line/orbital (Black & Decker Deluxe) ID:88|[[Sander, straight-line/orbital (Black & Decker Deluxe) ID:88]]
File:89.jpg|link=Scroll saw (Dremel) ID:89|[[Scroll saw (Dremel) ID:89]]
File:91.jpg|link=Table saw (Craftex CX201) ID:91|[[Table saw (Craftex CX201) ID:91]]
File:92.jpg|link=Thickness planer (Ryobi AP1301) ID:92|[[Thickness planer (Ryobi AP1301) ID:92]]
File:93.jpg|link=Vacuum, sawdust (Craftex CX404) ID:93|[[Vacuum, sawdust (Craftex CX404) ID:93]]
File:94.jpg|link=Vise, wood ID:94|[[Vise, wood ID:94]]
File:95.jpg|link=Vise, wood (Travis's) ID:95|[[Vise, wood (Travis's) ID:95]]
File:Makita cordless jigsaw.jpg|cordless Makita jig saw|cordless Makita jig saw
File:Ridgid random orbital sander (1 of 2, unknown which one).jpg|Ridgid random orbital sander (2 of these)
File:6" jointer.jpg|6" jointer
File:DeWalt sliding compound miter saw.jpg|12" Dewalt sliding compound miter saw
File:Wood tools sharpening station.jpg|A sharpening station with a plethora of tool sharpening grinders-jigs-etc
File:149.jpg|link=Drill press, floor mounted, variable speed ID:149|[[Drill press, floor mounted, variable speed ID:149]]
File:164.jpg|link=Handheld metal detector ID:164|[[Handheld metal detector ID:164]]
File:168.jpg|link=168|[[Planer, 16" Auto Planer]]
</gallery>

==Textile, Vinyl, and Media tools==

<gallery>
File:120.jpg|link=Sewing machine, domestic (Singer 1802) ID:120|[[Sewing machine, domestic (Singer 1802) ID:120]]
File:Singer 211G155.jpg|link=Sewing machine, industrial (Singer 211G155) ID:147|[[Sewing machine, industrial (Singer 211G155) ID:147]]
File:144.jpg|link=Embroidery machine, CNC (Tajima TEJT II-C NEO 1501) ID:144|[[Embroidery machine, CNC (Tajima TEJT II-C NEO 1501) ID:144]]
File:150.jpg|link=Sewing/embroidery machine, computer controlled (Singer Futura CE-250) ID:150|[[Sewing/embroidery machine, computer controlled (Singer Futura CE-250) ID:150]]
File:156.jpg|link=Sewing machine, domestic (Janome HD-1000) ID:156|[[Sewing machine, domestic (Janome HD-1000) ID:156]]
File:157.jpg|link=Serger, 4 thread (Singer 14U34B) ID:157|[[Serger, 4 thread (Singer 14U34B) ID:157]]
File:158.jpg|link=Serger, 4 thread, (Janome MyLock 634D) ID:158|[[Serger, 4 thread, (Janome MyLock 634D) ID:158]]
File:148.jpg|link=Vinyl cutter, big (Graphtec FC8000-75) ID:148|[[Vinyl cutter, big (Graphtec FC8000-75) ID:148]]
File:NoImage.png|Vinyl cutter, small (Silhouette Cameo), on loan from Jamie Frost
File:154.jpg|link=Heat press, digital (Geo Knight & Co, Inc. K20S) ID:154|[[Heat press, digital (Geo Knight & Co, Inc. K20S) ID:154]]
File:155.jpg|link=Heat press, auto release (Insta Graphic Systems 158) ID:155|[[Heat press, auto release (Insta Graphic Systems 158) ID:155]]
File:166.jpg|link=Printer, 44" Large Format (HP DesignJet T1200), ID:166|[[Printer, 44" Large Format (HP DesignJet T1200), ID:166]]
</gallery>

==Measuring and inspection tools==

{{hatnote|See also: the [[#Electronics equipment|electronics equipment section on this page]] for electrical and electronic measurement and test equipment.}}

<gallery>
File:97.jpg|link=Inspection mirror, 18" gooseneck ID:97|[[Inspection mirror, 18" gooseneck ID:97]]
File:98.jpg|link=Magnifier lamp, large, with lid ID:98|[[Magnifier lamp, large, with lid ID:98]]
File:99.jpg|link=Magnifier lamp, large, without lid ID:99|[[Magnifier lamp, large, without lid ID:99]]
File:100.jpg|link=Magnifier lamp, small, with lid ID:100|[[Magnifier lamp, small, with lid ID:100]]
File:101.jpg|link=Measuring tapes ID:101|[[Measuring tapes ID:101]]
File:102.jpg|link=Rulers ID:102|[[Rulers ID:102]]
File:103.jpg|link=Squares ID:103|[[Squares ID:103]]
File:104.jpg|link=Thermometer, infrared (H64) ID:104|[[Thermometer, infrared (H64) ID:104]]
</gallery>

==Miscellaneous tools==

<gallery>
File:111.jpg|link=Air compressor, 80-gallon (MAXair Premium) ID:111|[[Air compressor, 80-gallon (MAXair Premium) ID:111]]
File:112.jpg|link=Air compressor, silent ID:112|[[Air compressor, silent ID:112]]
File:115.jpg|link=Engraver ID:115|[[Engraver ID:115]]
File:116.jpg|link=Hand truck, red ID:116|[[Hand truck, red ID:116]]
File:117.jpg|link=Hot-wire foam cutter, handheld, 4.5"×5.5" (Woodland Scenics) ID:117|[[Hot-wire foam cutter, handheld, 4.5"×5.5" (Woodland Scenics) ID:117]]
File:118.jpg|link=Hot-wire foam cutter, tabletop, 14"×12" ID:118|[[Hot-wire foam cutter, tabletop, 14"×12" ID:118]]
File:127.jpg|link=Oil can, blue ID:127|[[Oil can, blue ID:127]]
File:128.jpg|link=Painting tools ID:128|[[Painting tools ID:128]]
File:129.jpg|link=Pinball machine (Williams Road Kings) ID:129|[[Pinball machine (Williams Road Kings) ID:129]]
File:130.jpg|link=Sandblasting cabinet, floor, blue (Powerfist) ID:130|[[Sandblasting cabinet, floor, blue (Powerfist) ID:130]]
File:131.jpg|link=Screwdriver magnetizer/demagnetizer (Wiha 40010) ID:131|[[Screwdriver magnetizer/demagnetizer (Wiha 40010) ID:131]]
File:132.jpg|link=Shop vacuum, orange ID:132|[[Shop vacuum, orange ID:132]]
File:133.jpg|link=Staple gun (Arrow T-18) ID:133|[[Staple gun (Arrow T-18) ID:133]]
File:122.jpg|link=Tile work surfaces ID:122|[[Tile work surfaces ID:122]]
File:123.jpg|link=Tile work surfaces ID:123|[[Tile work surfaces ID:123]]
File:134.jpg|link=Vacuum cart ID:134|[[Vacuum cart ID:134]]
File:136.jpg|link=Vacuum cleaner, portable ID:136|[[Vacuum cleaner, portable ID:136]]
File:137.jpg|link=Vacuum pump (Edwards SpeediVac ED200) ID:137|[[Vacuum pump (Edwards SpeediVac ED200) ID:137]]
File:161.jpg|link=Laminator (Scotch TL902) ID:161|[[Laminator (Scotch TL902) ID:161]]
File:166.jpg|link=Printer, 44" Large Format (HP DesignJet T1200), ID:166|[[Printer, 44" Large Format (HP DesignJet T1200), ID:166]]
File:169.jpg|link=ADS-B Base Station, FlightAware, ID:169|[[ADS-B Base Station, FlightAware, ID:169]]
</gallery>

==Removed equipment==

In case they are brought back, or, so people who could have sworn we had a tool know it was removed.

<gallery style="background: darksalmon">
File:3DP RapMan.jpg|[[3D printer (3D Systems RapMan)]]
File:3D printer, Come3D!.jpg|[[3D printer (Come3D!)]]
File:3DP Cupcake.jpg|[[3D printer (MakerBot Cupcake)]]
File:1.jpg|[[3D printer, FFF (IIIP) ID:1]]
File:3D printer, Nathan Ward's RepRap.jpg|[[3D printer, FFF (RepRap)]]
File:3D printer, Yin's Wanhao.jpg|[[3D printer, FFF (Wanhao Duplicator i3)]]
File:InVision si2.jpg|[[3D printer, MJM (3D Systems InVision si2)]]
File:NoImage.png|[[3D printer, SLA (mUVe 1) ID:5]]
File:Compressor Dewalt.jpg|[[Air compressor, 4-gallon (DeWalt)]]
File:Compressor Big.jpg|[[Air compressor, 17-gallon]]
File:110.jpg|[[Air compressor, 60-gallon (Campbell Hausfeld) ID:110]]
File:Reciprocating compressor.jpg|[[Air compressor, 80-gallon (Ingersoll Rand T30)]]
File:113.jpg|[[Air pump, foot-operated (Bell FootPumper) ID:113]]
File:Angle Grinder.jpg|[[Angle grinder (Kawasaki)]]
File:Anvil 75lb.jpg|[[Anvil]]
File:Bandsaw Horizontal.jpg|[[Bandsaw, metal, horizontal (Craftex B013N)]]
File:Bending Brake.jpg|[[Bending brake, 30" (Powerfist)]]
File:114.jpg|[[Bicycle tire jig ID:114]]
File:Buffer Benchtop.jpg|[[Buffer (Clarke 2H 5AB)]]
File:13.jpg|link=Counter (Fluke 1910A Multi-Counter) ID:13|[[Counter (Fluke 1910A Multi-Counter) ID:13]]
File:Dewars.jpg|[[Dewars, 50-litre]]
File:Drill Dewalt.jpg|[[Drill, corded (DeWalt)]]
File:Pick N Place.jpg|[[Electronics assembly pick and place machine (Multitronics 2000LX)]]
File:Forge Propane 2.jpg|[[Forge, propane (Jim's)]]
File:43.jpg|[[Forge (Travis's) ID:43]]
File:NoImage.png|[[Forge, propane, pass-through ID:44]]
File:17.jpg|[[Function generator (Krohn–Hite 5100A) ID:17]]
File:Impact Driver.jpg|[[Impact driver (DeWalt)]]
File:7.jpg|[[Laser cutter, small ID:7]]
File:Lathe, Torrent T.72-42.jpg|[[Lathe, metal (Torrent T.72-42)]]
File:Lathe Mill.jpg|[[Lathe–mill combination (Craftex B2229)]]
File:Lathe Wood Mini.jpg|[[Lathe, wood (Haussmann)]]
File:MaxNC10.jpg|[[Milling machine, CNC, mini (MAXNC 10)]]
File:Audio mixing board.jpg|[[PA system (Dan Damron's)]]
File:22.jpg|[[Oscilloscope (Kikusui COS 5060) ID:22]]
File:50.jpg|[[Oxyacetylene torch, large ID:50]]
File:Parts washer, Powerfist 3.5 L.jpg|[[Parts washer, 3.5 L (Powerfist)]]
File:Plasma cutter.thumbnail.jpg|[[Plasma cutter, CNC (Kyle Paavola's)]]
File:Router Plunge Makita.jpg|[[Router, plunge (Makita 3612BR)]]
File:10.jpg|[[Press (Powerfist) ID:10]]
File:NoImage.png|[[Router table, wooden ID:81]]
File:87.jpg|[[87|Sander, random orbital (Skil 7492) ID:87]]
File:Chop Saw.jpg|[[Saw, compound mitre (Ryobi)]]
File:Chopsaw Metal.jpg|[[Saw, compound mitre, metal (Ryobi)]]
File:Reciprocating Saw.jpg|[[Saw, sabre (Mastercraft)]]
File:Skil Saw BD.jpg|[[Saw, handheld circular, 7 1/4" (Black & Decker)]]
File:Skil Saw Red.jpg|[[Saw, handheld circular (Skil)]]
File:90.jpg|[[Scroll saw (Mastercraft 55-6714-6) ID:90]]
File:119.jpg|[[Sewing machine, industrial (Relsew) ID:119]]
File:Shaper, metal.jpg|[[Shaper, 7"]]
File:Taps Grey.jpg|[[Tap & die set (Mastercraft)]]
File:OxyAce Mini.jpg|[[Torch, oxygen–acetylene, mini]]
File:32.jpg|[[UV photomasker (Dan's) ID:32]]
File:135.jpg|[[Vacuum pump ID:135]]
File:Vice Medium.jpg|[[Vise, medium (Irwin)]]
File:Welder MIG.jpg|[[Welder, MIG (Lincoln Weld-Pak 100)]]
File:55.jpg|[[Welder, stick, orange (Acklands 225 AC Sizzler) ID:55]]
File:109.jpg|[[Welder, Stick, AC/DC (Miller Thunderbolt XL) ID:109]]
File:74.jpg|link=Miter saw, compound, sliding (Hitachi) ID:74|[[Miter saw, compound, sliding (Hitachi) ID:74]]
File:146.jpg|link=Garment graphic printer, direct inject (Brother GT-361) ID:146|[[Garment graphic printer, direct inject (Brother GT-361) ID:146]]
</gallery>

ADS-B Base Station, FlightAware, ID:169

2023-01-18T03:18:59Z

Peter.carless: added photo

File:169.png

2023-01-18T03:18:08Z

Peter.carless:

169

2023-01-18T03:13:32Z

Peter.carless: Created page with "{{subst:id|ADS-B Base Station, FlightAware, ID:169}}"

#REDIRECT [[ADS-B Base Station, FlightAware, ID:169]]{{id/after-redirect}}

ADS-B Base Station, FlightAware

2023-01-18T03:12:34Z

Peter.carless: Peter.carless moved page ADS-B Base Station, FlightAware to ADS-B Base Station, FlightAware, ID:169: adding iD

#REDIRECT [[ADS-B Base Station, FlightAware, ID:169]]

ADS-B Base Station, FlightAware, ID:169

2023-01-18T03:12:34Z

Peter.carless: Peter.carless moved page ADS-B Base Station, FlightAware to ADS-B Base Station, FlightAware, ID:169: adding iD

ADS-B Base Station, FlightAware, ID:169

2023-01-18T03:10:14Z

Peter.carless: Created page with "{{Equipment page | toolname = ADS-B Base Station, FlightAware | model = PiAware | serial = | owner = Calgary Protospace | loanstatus = Donated by Peter Carless | arrived..."