Alarm - Revision history

Jamie.frost: /* Alarm Code */ added screenshot

2023-09-17T02:39:52Z

Alarm Code: added screenshot

← Older revision		Revision as of 02:39, 17 September 2023
Line 1:		Line 1:
	=== Alarm Panels ===		===Alarm Panels===
	The Protospace alarm panels are located near the front and back entrances.		The Protospace alarm panels are located near the front and back entrances.

	=== Disarm - First In ===		===Disarm - First In===
	''When armed, opening a door will start the activation sequence, where the panels will sound a continuous tone. Don't Panic.''		''When armed, opening a door will start the activation sequence, where the panels will sound a continuous tone. Don't Panic.''

Line 11:		Line 11:
	If the correct code is not entered within about a minute, the full alarm siren will be activated. The same code is still used in full alarm state.		If the correct code is not entered within about a minute, the full alarm siren will be activated. The same code is still used in full alarm state.

	=== Arm - Last Out ===		===Arm - Last Out===
	''The alarm must be armed whenever Protospace is being left <u>'''vacant'''</u>, regardless of the length of time a person thinks they will be gone.''		''The alarm must be armed whenever Protospace is being left <u>'''vacant'''</u>, regardless of the length of time a person thinks they will be gone.''

	To arm the alarm, it must be in 'Ready' status:		To arm the alarm, it must be in 'Ready' status:

	# Ensure all exterior doors are closed and locked - all doors and locks are monitored by the alarm and it will not arm if something is unlocked or open.		#Ensure all exterior doors are closed and locked - all doors and locks are monitored by the alarm and it will not arm if something is unlocked or open.
	# Ensure that no motion sensors are triggered - You may need to stand still for a few extra seconds if you just walked to the door.		#Ensure that no motion sensors are triggered - You may need to stand still for a few extra seconds if you just walked to the door.
	# When the panel indicates "Ready" - Enter the alarm code, no other buttons need to be pressed.		#When the panel indicates "Ready" - Enter the alarm code, no other buttons need to be pressed.
	# An exit delay will be started of 1-2 minutes signified by a 1Hz chirp. During this time you can temporarily open the door to exit, then the alarm will be armed.		#An exit delay will be started of 1-2 minutes signified by a 1Hz chirp. During this time you can temporarily open the door to exit, then the alarm will be armed.

	== Alarm ~~Code~~ ==		==Alarm Integration==
	Vetted members can see the alarm code here: https://my.protospace.ca/cards		Vetted members can see the alarm code here: https://my.protospace.ca/cards

			Vetted members can see the alarm status on the portal, in the Stats section of the home page:
			[[File:Alarmstatus.png\|alt=Spaceport Screenshot\|left\|thumb\|Example of how the alarm integration is displayed on the Spaceport member stats screen.]]
			<br />

Jamie.frost: updated with 2 panels and specifics on what to expect

2023-09-17T02:30:54Z

updated with 2 panels and specifics on what to expect

@@ Line 1: / Line 1: @@
-The Protospace alarm is located near the back entrance. You'll need to arm it with the alarm code if you are the last person to leave the space.
+=== Alarm Panels ===
-To arm or disarm the alarm simply punch in the alarm code, no other buttons need to be pressed.  There is a light switch to the immediate left of the rear door as you come into the space.
+=== Disarm - First In ===
 Vetted members can see the alarm code here: https://my.protospace.ca/cards

David.chernenkoff: Added alarm operation instructions and light switch location

2021-08-15T21:48:40Z

Added alarm operation instructions and light switch location

← Older revision		Revision as of 21:48, 15 August 2021
Line 1:		Line 1:
	The Protospace alarm is located near the back entrance. You'll need to arm it with the alarm code if you are the last person to leave the space.		The Protospace alarm is located near the back entrance. You'll need to arm it with the alarm code if you are the last person to leave the space.

			To arm or disarm the alarm simply punch in the alarm code, no other buttons need to be pressed. There is a light switch to the immediate left of the rear door as you come into the space.


	Vetted members can see the alarm code here: https://my.protospace.ca/cards		Vetted members can see the alarm code here: https://my.protospace.ca/cards

Tanner.collin at 20:53, 15 August 2021

2021-08-15T20:53:03Z

← Older revision		Revision as of 20:53, 15 August 2021
Line 1:		Line 1:
	~~test~~		The Protospace alarm is located near the back entrance. You'll need to arm it with the alarm code if you are the last person to leave the space.

			Vetted members can see the alarm code here: https://my.protospace.ca/cards

Tanner.collin: Created page with "test"

2021-08-15T20:51:47Z

Created page with "test"

New page

test