Power Levels - Revision history

Dave at 17:05, 12 April 2015

2015-04-12T17:05:05Z

← Older revision		Revision as of 17:05, 12 April 2015
Line 6:		Line 6:
	==Cut Mode==		==Cut Mode==

	===~~Metal~~===		===Powder Coated Aluminium===

	<gallery>		<gallery>
	File:Wintr-sigil.jpeg\|Powder Coated ~~Aluminum~~<br>Speed: 20<br>Power: 40<br>Date: 13.03.04		File:Wintr-sigil.jpeg\|Powder Coated Aluminium<br>Speed: 20<br>Power: 40<br>Date: 13.03.04
	</gallery>		</gallery>

	==Engrave Mode==		==Engrave Mode==

	===Leather===		===Vegetable Tanned Leather===

	<gallery>		<gallery>
	File:LeatherEngrave.jpg\|Vegetable Tanned Leather<br>Note: power settings identified DO NOT reflect the current power modulation range of the laser (approximately 8%-30%) - values from the image would need to be scaled.<br>Note: four variables are varied on the grid: Speed, Power, Scan Gap, and Focus. Scan gap is the distance between successive engrave lines. Focus indicates distance above the surface of the material that the focal point is set.		File:LeatherEngrave.jpg\|Vegetable Tanned Leather<br>Note: power settings identified DO NOT reflect the current power modulation range of the laser (approximately 8%-30%) - values from the image would need to be scaled.<br>Note: four variables are varied on the grid: Speed, Power, Scan Gap, and Focus. Scan gap is the distance between successive engrave lines. Focus indicates distance above the surface of the material that the focal point is set.
	</gallery>		</gallery>

2015-04-12T17:03:17Z

← Older revision		Revision as of 17:03, 12 April 2015
Line 14:		Line 14:
	==Engrave Mode==		==Engrave Mode==

	==Leather==		===Leather===

	<gallery>		<gallery>
	File:LeatherEngrave.jpg\|Vegetable Tanned Leather<br>Note: power settings identified DO NOT reflect the current power modulation range of the laser (approximately 8%-30%) - values from the image would need to be scaled.<br>Note: four variables are varied on the grid: Speed, Power, Scan Gap, and Focus. Scan gap is the distance between successive engrave lines. Focus indicates distance above the surface of the material that the focal point is set.		File:LeatherEngrave.jpg\|Vegetable Tanned Leather<br>Note: power settings identified DO NOT reflect the current power modulation range of the laser (approximately 8%-30%) - values from the image would need to be scaled.<br>Note: four variables are varied on the grid: Speed, Power, Scan Gap, and Focus. Scan gap is the distance between successive engrave lines. Focus indicates distance above the surface of the material that the focal point is set.
	</gallery>		</gallery>

2015-04-12T17:02:09Z

← Older revision		Revision as of 17:02, 12 April 2015
Line 4:		Line 4:


	==~~Metals~~==		==Cut Mode==

			===Metal===

			<gallery>
			File:Wintr-sigil.jpeg\|Powder Coated Aluminum<br>Speed: 20<br>Power: 40<br>Date: 13.03.04
			</gallery>

			==Engrave Mode==

			==Leather==

	<gallery>		<gallery>
	File:~~Wintr-sigil~~.~~jpeg~~\|~~Powder Coated Aluminum~~<br>~~Setting~~: ~~Cut~~<br>Speed~~: 20<br>~~Power~~: 40<br>Date: 13~~.03.04		File:LeatherEngrave.jpg\|Vegetable Tanned Leather<br>Note: power settings identified DO NOT reflect the current power modulation range of the laser (approximately 8%-30%) - values from the image would need to be scaled.<br>Note: four variables are varied on the grid: Speed, Power, Scan Gap, and Focus. Scan gap is the distance between successive engrave lines. Focus indicates distance above the surface of the material that the focal point is set.
	</gallery>		</gallery>

2013-03-11T13:18:10Z

← Older revision		Revision as of 13:18, 11 March 2013
Line 1:		Line 1:
	Placeholder - Hoping to create a list of current power levels with examples of output. Let me know if there's a better location for this page or if it's relevant at all. ~~Better yet, move it or delete it if you have good reason~~ - wintr		[[Laser Cutter\|Back to the Laser Cutter]]

			Placeholder - Hoping to create a list of current power levels with examples of output. Let me know if there's a better location for this page or if it's relevant at all. - wintr

2013-03-05T09:14:39Z

Metals

← Older revision		Revision as of 09:14, 5 March 2013
Line 5:		Line 5:

	<gallery>		<gallery>
	File:Wintr-sigil.jpeg\|Powder Coated Aluminum<br>Speed: 20<br>Power: 40<br>Date: 13.03.04		File:Wintr-sigil.jpeg\|Powder Coated Aluminum<br>Setting: Cut<br>Speed: 20<br>Power: 40<br>Date: 13.03.04
	</gallery>		</gallery>

2013-03-05T09:14:12Z

← Older revision		Revision as of 09:14, 5 March 2013
Line 1:		Line 1:
	Placeholder - Hoping to create a list of current power levels with examples of output. - wintr		Placeholder - Hoping to create a list of current power levels with examples of output. Let me know if there's a better location for this page or if it's relevant at all. Better yet, move it or delete it if you have good reason - wintr


Line 5:		Line 5:

	<gallery>		<gallery>
	File:Wintr-sigil.jpeg\|Powder Coated Aluminum<br>S-20~~, P-~~40<br>13.03.04		File:Wintr-sigil.jpeg\|Powder Coated Aluminum<br>Speed: 20<br>Power: 40<br>Date: 13.03.04
	</gallery>		</gallery>

2013-03-05T09:12:59Z

← Older revision		Revision as of 09:12, 5 March 2013
Line 5:		Line 5:

	<gallery>		<gallery>
	File:Wintr-sigil.jpeg\|Powder Coated Aluminum<br>S-20, P-40		File:Wintr-sigil.jpeg\|Powder Coated Aluminum<br>S-20, P-40<br>13.03.04
	</gallery>		</gallery>

2013-03-05T09:12:18Z

Metals

← Older revision		Revision as of 09:12, 5 March 2013
Line 3:		Line 3:

	==Metals==		==Metals==

			<gallery>
			File:Wintr-sigil.jpeg\|Powder Coated Aluminum<br>S-20, P-40
			</gallery>

2013-03-05T09:04:34Z

← Older revision		Revision as of 09:04, 5 March 2013
Line 1:		Line 1:
	Placeholder - Hoping to create a list of current power levels with examples of output. - wintr		Placeholder - Hoping to create a list of current power levels with examples of output. - wintr


			==Metals==

2013-03-05T09:04:06Z

Created page with "Placeholder - Hoping to create a list of current power levels with examples of output. - wintr"

New page

Placeholder - Hoping to create a list of current power levels with examples of output. - wintr