Milling machine, CNC (Tormach PCNC 1100) ID:49: Difference between revisions

Jump to navigation Jump to search

Milling machine, CNC (Tormach PCNC 1100) ID:49 (view source)

Revision as of 18:37, 19 January 2025

54 bytes added ,  19 January
→‎Specifications: updated RPM based on current curriculum (2025-Jan-19 training by David)
(videos how do they work)
(→‎Specifications: updated RPM based on current curriculum (2025-Jan-19 training by David))
 
(5 intermediate revisions by one other user not shown)
Line 19: Line 19:
[[Category:Metalworking tools]]
[[Category:Metalworking tools]]
[[Category:Computer-controlled tools]]
[[Category:Computer-controlled tools]]
==Specifications==
==Specifications==
This is a PCNC 1100 series 2.
•Table Size – 34" x 9.5" 


•Table Slots – 2 drainage/alignment slots, 3 T-Slots 0.625" (5/8") – center slot -0.00 + 0.004" – outer slots – 0.000 + 0.008"  
*'''Table Size:''' 34" x 9.5"


•Work envelope (X-, Y-, Z-axis) – 18" x 9.5" x 16.5"  
*'''Table Slots:'''
**two drainage/alignment slots
**three T-Slots 0.625" (5/8")
**center slot -0.00 + 0.004"
**outer slots 0.000 + 0.008"


•Spindle Nose Diameter – 3 3/8"  
*'''Travel / Work Envelope (X/Y/Z):''' 18" x 9.5" x 16.5"
*'''Rapid traverse:''' X/Y at 90 IPM, Z at 65 IPM
*'''Maximum Workpiece Weight:''' 500 lbs.
*'''Spindle Nose Diameter:''' 3 3/8"
*'''Spindle Taper:''' BT30 with spindle lock for easy single hand drawbar operation
*'''Spindle Speed Range:''' 100 to 5140 RPM ('''4400''' RPM recommended as upper limit)
*'''Spindle Motor:''' 1.5hp (2hp peak) induction motor
*'''Spindle Center to Column Face:''' 11"
*'''Maximum Spindle Nose to Table:''' 17"
*'''Weight net / shipping:''' 1130 / 1325 lbs
*'''Operating temperature range:''' 7 to 38 '''°'''C


•Spindle Taper – BT30 with spindle lock for easy single hand drawbar operation. 
==Features==


•Spindle Speed Range RPM – 100 to 5140. Computer controlled spindle speed and direction with regenerative braking from a 1.5 hp induction motor (2 hp peak).
*NEMA 34 stepper motors on X, Y and Z
 
*Single Shot Lube Pump
•Cartridge style spindle with V-belt transmission. There are two overlapping speed ranges. Low belt speed is 100 – 2000 RPM, high belt is 250 – 5140 RPM 
*15 point lubrication. Each axis has an oil distribution channel milled full length on left and right vertical and horizontal surfaces (all 4 sliding surfaces) plus an oil line plumbed directly to the ball nut assembly
 
*Precision ground ball screws in the X, Y and Z motion. ISO/DIN P4 grade.
•Spindle Center to Column Face – 11"
*Complete way covers
 
*Slide ways are a bonded low friction surface (PTFE filled acetyl), hand scraped slide ways with milled oil distribution slots.
•Maximum Weight of Workpiece – 500 lbs. 
*Forward opening electrical cabinet. This unique design allows service even when the machine is placed near to a wall.
 
*Computer controlled spindle speed and direction with regenerative braking from 1.5 hp induction motor (2 hp peak)
•Max spindle nose to table – 17" 
*Cartridge style spindle with V-belt transmission. There are two overlapping speed ranges. Low belt speed is 100 – 2000 RPM, high belt is 250 – 5140 RPM
 
*Spindle safety is enhanced with a tool change safety interlock and key switch lockout. Main spindle contactor (VFD power) is automatically disengaged when operator is changing a tool. Spindle M-codes or manual spindle start will reengage VFD power automatically after tool change is completed.
•Forward opening electrical cabinet. This unique design allows service even when the machine is placed near to a wall.
*Operator console has manual override for all spindle controls.
 
•Weight net / shipping. – 1130 / 1325 lbs
 
•Operating temperature range 45 to 100 oF (7 to 38 oC)
 
•Rapid traverse X, Y = 90 IPM, Z = 65 IPM
 
•NEMA 34 stepper motors on X, Y and Z
 
•Single Shot Lube Pump
 
•15 point lubrication. Each axis has an oil distribution channel milled full length on left and right vertical and horizontal surfaces (all 4 sliding surfaces) plus an oil line plumbed directly to the ball nut assembly.
 
•Precision ground ball screws in the X, Y and Z motion. ISO/DIN P4 grade.  
 
•Complete way covers.
 
See [https://tormach.com/support/mill/pcnc-1100-legacy-documents Tormach's website] for more info. {{#evt:
service=youtube
|id=https://www.youtube.com/watch?v=9N_zx9jiR1g
|alignment=right
}}


==Documentation==
==Documentation==
[https://tormach.com/docs/download/assetlink/asset_id/584 Operator Manual]  
[https://tormach.com/support/mill/pcnc-1100-legacy-documents Tormach website]


[https://tormach.com/docs/download/assetlink/asset_id/184 Usb related motion failures, usage note READ THIS BEFORE USING]
[https://tormach.com/docs/download/assetlink/asset_id/584 Operator Manual]


[https://tormach.com/docs/download/assetlink/asset_id/205 Probe usage service bulletin]
[https://tormach.com/docs/download/assetlink/asset_id/205 Probe usage service bulletin]
[https://groups.google.com/g/protospace-discuss/c/9vPD54YSFsU/m/rOCAiESsAwAJ Pathpilot simulator] follow instructions on the list.
<iframe src='//www.youtube.com/watch?v=PlI6jyV6Vz8' width='640' height='360' frameborder='0' allowfullscreen='true'></iframe>
<nowiki>{{#ev:youtube|PlI6jyV6Vz8}}</nowiki>
==Simulator==
==Simulator==


*Create an account at <nowiki>https://www.tormach.com/pathpilot</nowiki>
*Create an account at https://www.tormach.com/pathpilot
*Login to <nowiki>https://hub.pathpilot.com/</nowiki>
*Login to https://hub.pathpilot.com/
*Choose our machine from older models at the bottom:
*Choose our machine from older models at the bottom:
**Tormach PCNC 1100
**Tormach PCNC 1100
Line 94: Line 74:
References: [https://forum.protospace.ca/t/tormach-training-follow-on-simulation-practice/2770 forum] and [https://groups.google.com/g/protospace-discuss/c/9vPD54YSFsU/m/rOCAiESsAwAJ mailing list]
References: [https://forum.protospace.ca/t/tormach-training-follow-on-simulation-practice/2770 forum] and [https://groups.google.com/g/protospace-discuss/c/9vPD54YSFsU/m/rOCAiESsAwAJ mailing list]


== Videos ==
==Videos==
<br />
<br />{{#evt:
service=youtube
|id=https://www.youtube.com/watch?v=9N_zx9jiR1g
}}<br />{{#ev:youtube|PlI6jyV6Vz8}}
Michael.fiss
86

edits

Retrieved from "https://ps-wiki.dns.t0.vc/Special:MobileDiff/6115...7256"

Navigation menu